REPAIR/ REPLACEMENT OF UNSERVICEABLE EARTHING FOR E/M INSTALLATION AND CONNECTED ITEMS, CHEMICAL EARTHING FOR BLDG NO P-80, REWIRING OF CERTAIN BLDGS AND REPAIR, MAINT AND OVERHAULING OF COOLING APPLIANCES AT KAMPTEE AND NAGPUR AREA UNDER GE KAMPTEE

Amount

M&L for maintenance free chemical earthing earth electrode comprising of 6m long,17.2 mm dia, low carbon steel rod, nickel processed (Electro Clean) molecular coppercoated for a thickness of 250 microns with an exothremically welded copper clamp with holes and SS nuts (CPRI approved) and one bag of 100 kg carbon based Loresco "powerset' back filling compound tested as per IEC 62561-7:2018 with all accessories and testing on completion upto the satisfaction of Engr-in-Charge complete all as specified and directed. Make:- Excel earthing or equivalent. Note:- (a) The cost of excavation, returning filling, removing and earth work PCC pit and CI cover, funnel & watering pipe, wire mesh shall be deemed to be included in the unit rate for earthing. (b) Desired earthing result should be less than or equal to 1 ohm.

M&L for maintenance free chemical earthing earth electrode comprising of 9m long,17.2 mm dia, low carbon steel rod, nickel processed (Electro Clean) molecular coppercoated for a thickness of 250 microns with an exothremically welded copper clamp with holes and SS nuts (CPRI approved) and one bag of 150 kg carbon based Loresco "powerset' back filling compound tested as per IEC 62561-7:2018 with all accessories and testing on completion upto the satisfaction of Engr-in-Charge complete all as specified and directed. Make:- Excel earthing or equivalent. Note:- (a) The cost of excavation, returning filling, removing and earth work PCC pit and CI cover, funnel & watering pipe, wiremesh shall be deemed to be included in the unit rate for earthing. (b) Desired earthing result should be less than or equal to 1 ohm.

M&L for earth continuity conductor or main earthing lead fixed to wall or batten or recess or chases as required 25X3 mm aluminium strip complete all as specified and directed.

M&L for cast iron earth electrode of size 75mm N, 2900mm long and 3.5mm thick with funnel for watering, GI flat 50X6 mm collar joint to pipe using 50X6mm GI pipe and strip and galvanized nut bolts of size 10/37 and washers as per drawing and pipe should be provided with 10 Nos 12mm dia holes spread along the periphery of the elctrode and back fill compound per pit 40 Kgs complete all as specified and directed. Make:- Kapilansh (TM Kapitrode) or equivalent. Note:- Cost of excavation, returning filling, removal and PCC pit, CI cover wiremesh shall be deemed to be included in unit rate.

M&L for drilling 6"/8" dia bore depth 3 mtrs for earthing in any type of strata and filled with black cotton soil mixed with black fill compound complete all as specified and directed.

M&L for earthing complete with galvanized street earth plate electrode 600x 600x 6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 TYPE B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

Fabrication, Supplying, Installing, Testing & Commissioning of feeder pillar box weather / vermin proof, outdoor type, factory made LT panel, from any CPRI approved manufacturer having dismesions of size not less than 1300mm x 1600mm x 450mm including necessary incoming & outgoing cable connections, cable glands thimbles of required sizes, made out of MS CRCA sheet 3.00mm thick for outer shell and 2mm thick for inner shell duly powder coated paint with inner shutter & outer double door with locking arrangement both side openable fixed on 50 x 50 x 5mm MS angle frame fixed 300mm above ground level & 450mm below the ground grouted in & including PCC 1:3:6 type C1 (using 20mm graded stone aggregate) complete all as specified, directed & comprising of following including refixing of existing cables to new panels by proper lugging & cable gland as required. (a) Busbar chamber for 3 phase & neutral of capacity 500 Amps (50mm x 10mm) alumunium bus bar duly insulated. (b) Multifunctioning meter to measure voltage, ampere, KWH, PF -1 Nos. (c) One set of LED indication lamp. (e) Incoming DPX type MCCB 320 amps 4 Pole 415 volts 25 KA thermal magnetic setting type- 1 Nos (Make:- Legrand Cat No. 420218 or equivalent in GE/ Siemens) (f) Outgoing Type DRX MCCB 125 amps 3 pole 415 volts 25 KA thermal magnetic setting - 5 Nos Make:- Legrand or equivalent in GE / Siemens) (g) Outgoing Type DRX MCCB 63 amps 3 pole 415 volts 25 KA thermal magnetic setting - 1 Nos Make:- Legrand or equivalent in GE / Siemens) (h) Outgoing Type DRX MCCB 40 amps 4 pole 415 volts 10 KA thermal magnetic setting - 1 Nos Make:- Legrand or equivalent in GE / Siemens) Note:- Rates deemed to include dismantling of old UNSV panel and connection of existing cables to new panel with suitable size lugs etc complete all as specified and directed.

M&L for shifting of old panel, disconnecting incomer and outgoing cables, transporting to new location as directed and fixing with installation of panel complete on suitable PCC structure, connecting existing cables and testing complete all as specified and directed.

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/ colour washing/ distemper to match with existing wall/ floor/ ceiling finishes complete all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/ capacity and making good disturbed surfaces to match with the existing surfaces complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade/PVC caping casing on surface of wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 12 above but one ceiling/exhaust fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 12 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 12 above but one 3 pin 5 amps socket out let point on independent board complete all as specified and directed.

All as per item No 12 above but one bell/buzzer point controlled by one bell push complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in surface of wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

As per item No 17 above but one ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.

As per item No 17 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

As per item No 17 above but one 3 pin 5 amps socket out let point on independent board complete all as specified and directed.

As per item No 17 above but one bell/buzzer point controlled by one bell push complete all as specified and directed.

All as per item No 17 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

All as per item No 17 above but wiring with 4.0 sqmm multi stranded cable and earth wire with copper conductor of size 4.0 sqmm for 15 amps power point complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20mm medium grade concealed in wall, of size 2x2.5 Sqmm with earth wire of 1x2.5 Sqmm complete all as specified and directed. Note:- Accessories for point/ sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

All as per item No 24 above but 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed.

All as per item No 24 above but 2x 6.0 Sqmm with earth wire of 1x6.0 Sqmm complete all as specified and directed.

All as per item No 24 above but 4x 6.0 Sqmm with earth wire of 2x6.0 Sqmm complete all as specified and directed.

All as per item No 24 above but 4x 10 Sqmm with earth wire of 2x10.0 Sqmm complete all as specified and directed.

S&F ceiling rose surface type 2/3 terminal 5 amps complete all as specified and directed.

S&F bell ding dong, AC 230 volts, single phase complete all as specified and directed.

S&F lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and directed.

S&F modular switch one way 6A, 1 module complete all as specified and directed.

S&F modular switch one way 16A, 1 module complete all as specified and directed.

S&F modular bell push 6A, 1 module complete all as specified and directed.

S&F modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.

S&F modular socket 6A/ 16A, 2/3 pin combined 2 module complete all as specified and directed.

S&F modular fan step regulator, 120 watt, 2 module complete all as specified and directed.

S&F highly durable surface mounted 18/20 watts LED batten/ surface constructed of fire retardant engineering grade extruded aluminium body 100 lumen per watt, min 2000 lumen and decorative end cap complete with driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and directed. Make:- CG Cat No LCTLN-20-CDL or equivalent in Bajaj/Philips/Luker.

S&F light fitting 9W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50HZ complete all as specified and directed. Make: CG Cat No LBHP-10-CDL or equivalent in Philips/ Wipro/ Luker.

S&F fittings with surface mount LED down lighters 12 W including driver with rated voltage 240 V, 50 Hz, complete all as specified and directed. Make: CG Cat No LCDEP-12-CDL or equivalent in Philips/ Wipro/ Luker.

S&F energy efficient surface mounted 2'X2' grid ceiling LED fitting 36/40 W rated voltage 240 V, 50Hz combination with profiled and flat diffuse complete all as specified and directed. Make:- CG Cat No LCTLRF6-36-CDL or equivalent in Philips/ Wipro/ Luker.

S&F LED baton fitting 2' length including drivers having energy consumption 10/11W, 230 V, 50Hz, 6500K, not less than 800 lumen prewired, complete all as specified and directed. Make:- CG Cat No LCTLN-10-CDL or equivalent in Philips/Wipro/ Luker.

S&F building security light LED 25W with lumen O/P 1800 with driver with rated voltage 240 V, 50Hz, including mounting GI (made out of 25mm dia light grade pipe 0.8 m bent to shape including FI clamps nut bolts etc) complete all as specified and directed. Make:- CG Cat No LSTS-25-CDL-M or equivalent in Philips/ Wipro/ Luker.

S&F electronic LED driver with thermal, short circuit & overload protection for LED 2'x2' grid ceiling light 36/40 W with rated voltage 240 V, 50Hz complete all as specified and directed. Make:- Wipro/Philips/ Surya/Halonix

S&F electronic LED driver with thermal, short circuit & overload protection for LED security light 18-25 W with rated voltage 240 V, 50Hz complete all as specified and directed. Make:- Wipro/Philips/ Surya/Halonix

S&F electronic LED driver with thermal, short circuit & overload protection for LED down lighter 12 W with rated voltage 240 V, 50Hz complete all as specified and directed. Make:- Wipro/Philips/ Surya/Halonix

S&F sheet metal enclosure single pole & neutral for 240 volts 4/6 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F sheet metal enclosure vertical triple pole & neutral(VTPN) with MCCB 63 amps for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F MCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series complete all as specified and directed.

S&F MCB single pole and neutral 240 volt 6 to40 amps 10 KA breaking capacity, 'C' series, complete all as specified and directed.

S&F MCB triple pole and neutral 415 volt 40 to 60 amps 10 KA complete all as specified and directed.

M&L for earthing complete with galvanized street earth plate electrode 600x600x6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 TYPE B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

Servicing/ preventive maintenance / repairs/ cleaning of Air conditioner Window type of capacity 1.5/2.0 TR complete with dismantling the fan motor, blower, housing, filters etc. Checking up and rectification to wiring and relay and PCB connections, reassembling the same, connecting to system and testing complete all as specified and directed.

Servicing/ preventive maintenance/ repairs of Air conditioner Split type of capacities 1.5 /2.0TR complete with dismantling internal and external units separately, cleaning of components like fan motor, blower, housing, filters etc. Checking up and rectification to wiring and connection, cleaning and reallignment of the fan & coil unit and drain / condensate pipe, reassembling the same and connecting up and testing complete all as specified and directed.

Cutting and taking out compressor of window type AC of 1.5/2.0 TR and S&F compressor with all accessories, jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified & directed. Make: Tecumesh / Kirloskar / Emerson.

Cutting and taking out compressor of split type AC of 1.5 TR and S&F compressor with all accessories, jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified & directed. Make: Tecumesh / Kirloskar / Emerson.

Cutting and taking out compressor of split type AC of 2.0 TR and S&F compressor with all accessories, jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified & directed. Make: Tecumesh / Kirloskar / Emerson.

S&F in repair Condenser coil suitable for split type AC of 1.5/2.0 TR complete all as specified and directed. Make:- as per sample.

S&F in repair Condenser coil suitable for window type AC of 1.5/2.0 TR complete all as specified and directed. Make:- as per sample.

S&F in repair starting capacitor of capacity 80/100/120 mfd, 440 volt AC suitable for window type/ split air conditioner, any capacity complete all as specified and as directed. Make:- TESLA/ EPCOS/ Siemens/ Usha/ Electra.

S&F in repair running capacitor of capacity 36/45 mfd, 440 volt AC suitable for window type/ Split type air conditioner any capacity complete all as specified and as directed. Make:- TESLA/ EPCOS/ Siemens/ Usha/ Electra

S&F in repairs Thermostat Switch with regulator knob suitable for any capacity Air conditioner complete all as specified and as directed. Make:- Indfos/ Renutrol / Annapurna.

S&F in repair Fan Motor for A/C 1.5 ton capacity suitable for Window type A/C complete all as specified and as directed. Make:- As per sample.

S&F in repair Fan motor for outdoor unit of Split AC of capacity 1.5 Ton /2 Ton suitable for Split AC complete all as specified and as directed. Make:- LG, Samsung, Voltas, Blue Star.

S&F in repair oscillating motor for indoor unit of Split AC suitable for capacity 1.5 Ton / 2 Ton complete all as specified and as directed. Make:- As per sample.

S&F in repairs remote control (Micro processor) unit suitable for split type AC 1.5/ 2 TR capacity complete with wires of remote complete all as specified and directed. Make:- LG, Samsung, Voltas, Blue Star.

S&F in repair PCB suitable to split type AC 1.5/ 2 TR complete all as specified and directed. Make:- As per sample.

S&F in repair PCB suitable to window type AC 1.5/ 2 TR complete all as specified and directed. Make:- As per sample.

S&F in repair, rubber ring of blower motor for window type AC of 1.5 ton capacity complete all as specified and directed. Make:- As per sample.

S&F in repair PVC front grill suitable for window type room AC for any capacity complete all as specified and as directed. Make:- As per sample.

S&F in repair return air filter made of PVC suitable for window type AC/ split AC any make and any type (As per sample) complete all as specified and directed.

Servicing/ preventive maintenance/ repairs of any type water cooler of cooling capacity 40 to 150 Ltrs / Hr and storage capacity upto 150 Ltrs complete with disconnecting the water connection, inserting dead plug, cleaning and checking the fan motor, taps, fan blades, condenser etc. Checking up and rectification to wiring and connections, cleaning the cold water tank with bleaching powder, piping, flushing refrigerant lines, reallignment of the fan coil unit and drain pipe, connecting to water mains and testing complete all as specified and directed. Note:- (i) Servicing of equipment shall be carried out at site. (ii) Replacement of any spares shall be measured & paid as "S&F in repair" under respective items of this schedule.

Repairs to storage type water cooler body, including patch work such as cutting and removing of corroded & damaged portion of MS sheet & welding of new MS sheet of suitable gauge including painting after repair with one coat of redoxide primer and two coat of synthetic enamel paint of apporved colour and reassembling, marking of MES/ SM NO complete all as specified and directed. Note:- Size of marking letter will be 1" size.

Cutting and taking out compressor of water cooler 40/60/80 Ltrs and S&F compressor with all accessories, jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified & directed. Make:- Godrej/ Kirloskar/ Voltas/ Emerson.

Cutting and taking out compressor of water cooler 120/150 Ltrs and S&F compressor with all accessories, jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified and directed. Make:- Godrej/ Kirloskar/ Voltas/ Emerson.

S&F in repairs copper pencil stainer suitable for Water Cooler complete all as specified and directed. Make:- Kishco/ MB Capallary/ NB.

S&F in repairs copper pipe 3/8" dia suitable for water cooler complete all as specified and as directed.

S&F in repairs new fan motor 1/35 & 1/83 HP, 230 Volts single phase, 1440 RPM suitable for water cooler complete all as specified and as directed. Make- as per sample.

S&F in repair fan blade made out of aluminium, suitable for water cooler 40/ 60/ 80/ 120 ltrs capacity of make as per sample any size complete all as specified and directed.

S&F in repairs overload protector suitable for water cooler capacity 40/ 60/ 80/ 120 Ltr complete all as specified and as directed. Make:- Usha/ Shriram/ Bluestar/ Voltas.

S&F in repair Thermostat suitable for water cooler of capacity 40/ 60/ 80 ltrs complete all as specified and as directed. Make:- Indfoss/ Renutrol / Annapurna.

S&F in repairs Waste water tray, Stainless steel suitable for water cooler including brass screws for fixing of tray complete all as specified and as directed.

S&F PVC corrugated medium grade 15/20mm dia waste water pipe suitable for water cooler waste water tray to near by drain including bends, elbows, tees, waste water coupling etc complete all as specified and as directed.

S&F in repairs Stop valve cast copper alloy, screwed down high pressure with clutch or butterfly handle, screwed both ends for irons pipes or for unions and fixed of size 15mm bore complete all as specified and as directed.

S&F in repair relay with OLP suitable for water cooler (Bluestar/ Usha/ Voltas) complete all as specified and directed. Make:- Renutrol/ Shriram.

S&F in repairs 10/15 mfd running capacitor suitable for water cooler complete all as specified and as directed. Make:- EPCOS/ KEILL/ Seimens

S&F float valve for water cooler PVC 15mm dia with ball (short rod) complete all as specified and as directed. Make:- Prayag/ Polytuff.

S&F in repairs self closing taps or push cock, cast copper alloy, chromium plated, screwed for water cooler 15mm dia complete all as specified and as directed. Make:- Prayag/ Polytuff.

S&F in repair, bottom tank fixing of air ducting cooler, of any capacity, fabricated out of 2mm thick mild steel galvanised iron sheet with gas welding at joints in and including applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store bore of water cooler tube 15mm dia complete all as specified and directed.

S&F tubes medium grade galvanised, with all fittings and fix complete to wall and ceilings or laid in floors bore of tube 15mm dia complete all as specified and directed.

Servicing/ preventive maint / repairs the housing base testing of refrigerator of any capacity, checking up and rectification to wiring and connections and other accessories / parts, cleaning of refrigerator inner and outer side and reallignment of the parts, connecting up and testing complete all as specified and directed. Note:- (i) Servicing of equipment shall be carried out at site. (ii) Replacement of any spares shall be measured & paid as "S&F in repair" under respective items of this schedule.

Cutting and taking out compressor of refrigeator 165 Ltrs and S&F compressor with all accessories, jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified & directed. Make:- Godrej/ Whirlpool /Tecumesh/ LG/ Videocon /Kirloakar.

Cutting and taking out compressor of refrigeator 210 Ltrs and S&F compressor with all accessories, jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified & directed. Make:- Godrej/ Whirlpool /Tecumesh/ LG/ Videocon /Kirloakar.

Cutting and taking out compressor of refrigeator 300/310 Ltrs and S&F compressor with all accessories, jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified & directed. Make:- Godrej/Whirlpool /Tecumesh/ LG/ Videcon.Kirloakar.

S&F in repairs Freezer with door for Refgs 165 to 310 ltr capacity complete all as specified and as directed. Make:- As per sample.

S&F in repairs relay suitable for refrigerator (Make:- Shriram/ Renutrol/ Electrical) of make Godrej / Whirlpool/ Samsung complete all as specified and directed.

S&F in repair thermostatic switch defrost type including plastic regulating knob suitable for Refrigerator complete all as specified and directed. Make- as per sample.

S&F in repairs copper stainer and capillary tube suitable for refrigerator size of capillary 0.31 & 0.36 mm dia maintioned above complete all as specified and directed. Make:- KISHCO/ MB CAPILLARY.

S&F timer 8 Amp for refrigerator of capacity 165 to 310 ltrs complete all as specified and directed. Make:- As per sample.

S&F bulb 15 watts 230 volts threaded including lamp holder for refrigerator mentioned above complete all as specified and directed.

S&F in repair door switch suitable for refrigerators of capacity 165/310 ltrs for the refrigerators complete all as specified and directed. Make:- As per sample.

S&F in repair Freezer fan motor for the refrigerators of any capacity all as specified and directed. Make:- As per sample.

S&F in repair Condenser coil suitable for Refrigerator of capacity 165 to 310 ltrs complete all as specified and directed. Make:- As per sample.

S&F Chiller tray suitable for the Refrigerators of capacity 165/310 ltrs complete all as specified and directed. Make:- As per sample.

S&F in repair Defrost bi metal for refrigerator of capacity 165 to 310 ltrs complete all as specified and directed. Make:- As per sample.

S&F in repair PCB for refrigerator of capacity 165 to 310 ltrs complete all as specified and directed. Make:- As per sample.

S&F Frosted glass 4mm thick for vegetable tray suitable for the Refrigerators of capacity 165/310 ltrs complete all as specified and directed.

Servicing/ preventive maint/ repairs the housing base testing of Deep Freezer of any capacity checking up and rectification to wiring and connections and accessories / parts, cleaning of deep freezer inner and outer side, refixing & reallignment of the parts, connecting up and testing complete all as specified and directed. Note:- (i) Servicing of equipment shall be carried out at site. (ii) Replacement of any spares shall be measured & paid as "S&F in repair" under respective items of this schedule.

Cutting and taking out compressor of Deep freezer 300 Ltrs and S&F compressor with all accessories, jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified & directed. Make:- Godrej / Tecumesh/ LG/ Kirloskar/ Emerson.

S&F in repairs capillary tube and silica drier type stainer (Make:-Ternate/ Kishco/ MB Capillary) suitable for Deep Freezer of 200/ 300/ 362 Ltrs capacity complete all as specified and directed. Make:- Bluestar / Voltas.

S&F in repair starting capacitor of capacity 80-100 mfd for Deep Freezer complete all as specified and directed. Make:- Asian/ Epcos/ Tesla.

S&F in repair Over load protector suitable for Deep freezer of 200/ 300/ 362 ltrs capacity, Make:- Blue Star / Voltas complete all as specified and directed. Make:- Shriram/ Renutrol/ Danfoss.

S&F in repair thermostat switch suitable for Deep Freezer 200/ 300/ 362 ltrs capacity, (Make:- Blue Star / Voltas) complete all as specified and directed. Make:- As per sample.

S&F in repair Relay, open type suitable for Deep Freezer 200/ 300/ 362 ltrs capacity complete all as specified and directed. Make:- Annapurna/ Renutrol/ Shriram.

S&F in repair fan motor for 'D' freezer concealed type suitable for Bluestar, Voltas complete all as specified and as directed.

M&L for R-134 A refrigerant gas filling in the air conditioner, water cooler, refrigerator, deep freezer on repairs carried out including testing the system for smooth functioning complete all as specified and directed.

M&L for R-22 refrigerant gas filling in the air conditioner, water cooler, refrigerator, deep freezer on repairs carried out including testing the system for smooth functioning complete all as specified and directed.

S&F Wood wool suitable for desert coolers complete all as specified and as directed.

S&F in repair top of desert cooler, of any capacity, fabricated out of 1mm thick mild steel galvanised iron sheet including gas welding at joints in and including applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

S&F in repair side/ back shutter fabric item made out of 1mm thick galvanised iron sheet of size suitable for desert cooler of air delivery capacity 4000/ 5000 Cum/hour in and including applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

S&F in repair bottom tank fixing of desert cooler, of any capacity, fabricated out of 1mm thick mild steel galvanised iron sheet with gas welding at joints in and including applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed.

S&F M Seal (in 100 Gram Pkt) complete all as specified and as directed.

S&F PVC pipe 1/2" dia H/D for desert cooler for internal connection complete all as specified and as directed.

S&F fan motor for desert cooler 1400 RPM, 450mm sweep 1/8 HP, single phase double speed with super enameled copper winding wire of suitable size and gauge with frame and blade complete confirming to relevant IS complete all as specified and as directed. Make:- AUE/ CG/ Pooler / Shagoon.

M&L for rewinding of fan motor with super enameled copper winding wire of suitable size and gauge including replacement of bush, shaft, bearing, rotor, stater and smooth functioning of motor and insulating materials such as insulating paper, varnishing and re-assembling and testing complete all as specified and as directed.

S&F in repair aluminium fan blade powder coated for fan motor of desert cooler any size complete all as specified & directed.

S&F in repair cast iron ring of cooler fan motor with clamps incluiding nuts & bolts suitable for desert coolers complete all as specified and directed.

S&F in repair submersible water pumps for desert cooler, as per sample complete all as specified and directed.

S&F in repair diverter any size for desert coolers complete all as specified and as directed.

S&F in repair Three pin plug top 5 amps complete all as specified and as directed.

S&F in repair Three pin plug top 15 amps complete all as specified and as directed.

S&F PVC insulated and PVC sheathed flexible copper conductor cable, 1.5 sq mm 3 core complete all as specified and directed.

S&F PVC insulated and PVC sheathed flexible copper conductor cable, 2.50 sq mm 3 core complete all as specified and directed.

M&L for replacement of condenser AC 230 volt 4.0 MFD complete all as specified and directed.

S&F in repairs sheet metal enclosures with socket plugtop and MCBs single pole & neutral enclosure with a two pin & earth plug & socket complete with one single pole MCBs of capacity 25 Amps, 240 volts etc complete all as specified and directed.

S&F new DOL starter upto 3/7 HP, 3 phase, 415 V, relay range 9 to 14 A complete all as specified and directed.

Repairs to voltage stabilizer 1/3 KVA of different make including replacement of wornt out parts such as volt meter, transformer, circuit plate, step-up, step-down relay etc complete all as specified and directed.

Repairs to 3 Phase Exhaust fan motor from air cooling system opening complete, metallising of shaft, cleaning & removing burnt damaged winding and rewinding with super enamalled copper wire of same guage and refitting in air cooling system complete all as specified and directed.

Repair and maintenance of air cooling system including replacement of wood wool, wire mesh, canvas fabrication of cooler stand, painting of dessert cooler and outside duct, testing complete all as specified and directed.

M&L for maintenance free chemical earthing earth electrode comprising of 6m long, 32mm dia low carbon steel rod, nickel processed (electro clean) molecular cooperated for a thickness of 500 microns with an exothermically welded copper clamp with holes and SS nuts (CPRI approved) and one bag of 100 Kg carbon based Loresco "powerset" back filling compound tested as per IEC 62439-7:2018 including PVC pipe 25mm dia perforated for watering suitably and 250mm bore complete with all accessories and testing on completion upto the satisfaction of Engineer-in-Charge complete all as specified and directed. Note:- (a) The cost of excavation, returning filling, removing and earth work PCC pit and CI cover, funnel & watering pipe, wiremesh shall be deemed to be included in the unit rate for earthing. (b) Desired earthing result should be less than or equal to 1 ohm.

M&L for earth continuity conductor or main earthing lead fixed to wall or batten or recess or chases as required 32x6mm copper strip complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.84,549.00]

Vaidehi E Link

VIJ ASSOCIATES

Bidder Name

Paragon Electrotechnics

Vaidehi E Link

VIJ ASSOCIATES