Addn/Altn of 4 INF DOU Bldg. and provn of 01 X toilet at Old Cantt Prayagraj.

Amount

Dismantling asbestos cement (corrugated, semi corrugated sheets in roof coverings including ridges complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated coloured steel sheet, 0.50mm thick having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel coloured sheet, 0.50mm thick having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section in framed work in any position complete all as speciifed and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F rolled mild steel work in roof trusses (framed), trussed, purlins, crane gantries, pillars, rails and fastenings and heavy bracket framing (beam, tee, angle, channel, Hollow or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde - E-250) quality - A complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets/AC boards as in flase ceiling, lining/ cladding/boarding etc, any thickness including frame and fixing arrangment (any discription) complete all as specified and directed.

M&L for providing false ceiling using cement fiber board of size 600x600x6mm and GI snap grid frame complete all as specified and directed Frame Work: (i) GI angle of size 25x25mm screwed fixed to the parameter of the wall at a level/height as directed by Engineer-in-charge. (ii) Main ‘T’ runners: Sections (3600mm long) with ‘H’ slots at 150mm/300mm center in its vertical flange to hold the cross ‘T’ sections are suspended from the soffits with the help of rawl plug, soffits cleats and GI wire (4mm dia) at 1200mm c/c. These sections also have notch at its both ends to increase the length. (iii) Cross ‘T’ runner: Sections of 1200mm length with ‘H’ slot in the center and notches at the both ends are inserted fixed into the main ‘T’ at 600mm c/c to form a regular grid of 600x1200mm cross ‘T’ section of 600mm length is inserted fixed into the 1200mm cross ‘T’ to form a regular grid of 600 x 600mm.

Demolition of brickwork built in cement or cement lime mortar complete all as speciifed and directed.

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1: 6 complete all as specified and as directed.

All as per item No. 10 above but except Except Brick. Note :- Usable bricks obtained from Srl item No. 8 above to be used.

M&L for brick work with old size sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM (1:4) complete all as specified and as directed.

M&L for Plain cement concrete, 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick wall or concrete surfaces in CM (1:6) complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4, mixed with liquid water proofing compound @ 200ml/50Kg cement complete all as specified and as directed. NOTE: Liquid water proofing compound shall be measured and paid separately under respective item here-in-under.

Supply only Liquid water proofing compound complete all as specified and as directed.

M&L for removal of existing treatment by scrapping old painted surface of wall and make the surface free from dust, loose paint etc complete all as specified and as directed.

M&L for applying waterproof cement based putty 1mm thick, over prepared surface of wall, sanding of the putty surface to make the surface even and smooth and make it free from dust etc. complete all as specified and directed.

M&L for two coats of cement base paint of approved colour over coat of primer complete all as specified and as directed.

M&L for two coats of Oil bound distemper paint over a coat of primer complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) incl chequered tiling and Paver blocks complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for 1st quality non skid coloured ceramic Heavy Duty parking tiles n exc 0.11 Sqm in area & 10 mm thick, set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in vertical surface, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar 1:4 Complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450mm X 300mm X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick plaster in cement mortar (1:4) complete all as specified and directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20 mm granite slab work (in single full length) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for Rounding to edges of stone slabs one edge/half rounded, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified & directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area not exc 1.5 Sqm each complete all as specified & directed

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Factory made Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & given on page No. 179 of SSR Part-II-2020 under section 8, complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 125 x 60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified & directed

S&F 200mm(bolt length) Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm Aluminium handles, cast type, anodised of pattern/design as approved by GE/sample kept in GE's office complete all as specified and directed.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F 250mm(bolt length) Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F in repair Aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

M&L for 4.8mm thick sheet glass ordinary quality (area of each pane not exc 0.5 Sqm ) incl rubber beading and jointing cleats complete all as specified and directed.

S&F 10 mm thick toughened sheet glass fitted as in aluminium door shutter/window/ventilator incl fixing with rubber beading complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel /iron surfaces of any description, over 10cm in width or girth, not otherwise described including preparation of surface complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, over 10cm in width or girth, not otherwise described including preparation of surface complete all as specified and directed.

M&L for Powder coated Anodised aluminium frame for doors/windows/ventilators with one or more rebates including joining cleat for fixing complete all as specified and directed. Note:- Thickness of powder coating shall not be less than 50 micron.

M&L for fabrication and fixing aluminium window / ventilator, OPENABLE TYPE including lock, jointing cleats, glazing clips, rubber packing, aluminium snap beading, screws anodized aluminium fittings such as hinges, tower bolts, handles etc complete all as specified and directed. The alluminum sections used shall be POWDER COATED of following specifications:- (a) Top & Bottom styles of shutter shall be of section size 61.85 x 31.75x 1.2 mm thick (b) Side rails and lock rails of shutter shall be of section size 44.45 x 44.45 x 1.2mm thick NOTE Glass shall be paid seperatly under respective item.

M&L for Mild steel framed work such as grills, grataings, ladder, railing and similar work etc with ends of bars shouldered and/or riveted or forged into spikes conforming to Fe 290 Gde-E-165 complete all as specified and directed.

S&F 140mm Floor door stopper of brass body and tongue, with hard drawn steel spring complete all as specified and directed.

M&L for fabrication and fixing of pressed steel cupboard shutter using 1 mm thick MS plain shaeet for shutter & 1.25 mm thick for frame bend to shape, locking arrangement using mortice lock having handle incl two coats of synthetic enamel paint on inner and outer surface over a coat of red oxide primer complete all as specified and directed.

M&L for 2nd class Hard wood Plain fillets, square, rectangular or triangular in section secured with nails or brads and having cross sectional area not exc 3 sqcm complete all as specified and as directed

S&F 18mm thick PVC celuka board plain white colour both side and fixed with screws/solvent cement/adhesive to make kitchen cabinet sides/top/bottom & selves inside the cabinet etc complete all as specified and directed.

S&F in repair 202 grade stainless steel drapery rod 20 mm dia with fixing brackets and fancy type finials /Lattos, complete all as specified & directed Note : Brackets and finials/latto shall strictly as per sample kept in GE's office or as approved by GE.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and as directed.

S&F 75mm PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent complete all as specified and as directed.

All as per item No. 65 above but in repair.

S&F Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts (not less than 8mm dia and 75mm long) and securing ends of stays suitable for 75mm/100mm bore pipe complete all as specified and as directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

All as per item No. 68 above but in repair.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15mm bore pipe complete all as specified & directed.

S&F GI tubes 15mm bore medium grade with all fittings fixed to walls and ceilings or laid in floor complete all as specified & directed

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore pipe complete all as specified & directed.

S&F 20mm bore GI tubing medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed.

S&F 15 mm dia angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified & directed.

All as per item No. 74 above but in repair.

All as per item No. 76 above but in repair.

S&F in repair european type combination pattern water closet (casket type cchristina) with mounted flushing cistern incl seat cover and pvc connection complete all as specified and as directed.

S&F in repair brass chromium plated, fancy type 2 way angle cock screwed for iron pipes of dia 15 mm complete all as specified and directed.

S&F Health faucet with ABS body with 8 mm dia 1.00 m long flexible tube and wall hook complete all as specified and directed.

All as per item No. 80 above but in repair.

S&F 60cm long sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf, 12cm wide with chromium plated bracket guard and railing complete all as specified and directed.

All as per item No. 82 above but in repair.

S&F vitreous china wash hand basin (WHB), white, flat back of size 550 x 400 mm with pedestal excluding taps, waste chain and plug but including bracket, waste coupling of 32 mm size complete all as specified and directed.

All as per item No. 84 above but in repair.

S&F in repair vitreous china wash hand basin (WHB) of size 485x370x205mm fixed in counter including all accessories complete all as specified and directed.

S&F 15 mm dia bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified & directed.

All as per item No. 87 above but in repair.

S&F in repair 15 mm dia stop valves cast copper alloy chromium plated long shank(concealed type), screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F Brass chromium plated shower rose 125 mm dia with shower arm complete all as specified and directed.

All as per item No. 90 above but in repair.

S&F 15 mm dia stop valves cast copper alloy chromium plated long shank (concealed type), screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

All as per item No. 92 above but in repair.

S&F 1000 litters capacity white colour double layer, ISI marked, rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces for inlet, outlet, washout, overflow, GI tank nipple and 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball, screwed for iron pipe complete all as specified and directed.

S&F 20 mm dia Gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified & directed.

All as per item No. 95 above but in repair.

S&F 15 mm dia Gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified & directed.

All as per item No. 97 above but in repair.

S&F PVC connections, 15mm size with PTMT nuts of length 600mm complete all as specified & directed.

All as per item No. 99 above but in repair.

S&F in repair brass chromium plated Towel rail, 20mm dia, 60Cm long between flanges including brackets fixed to wall complete all as specified and directed.

All as per item No. 101 above but in repair.

S&F in repair stainless steel Soap dish of prooved design and pattern ( as per sample kept in GE's Office) complete all as specified & directed.

All as per item No. 103 above but in repair.

S&F 15 mm dia Pillar tap cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified & directed.

All as per item No. 105 above but in repair.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggergate) as in foundation filling/mass concrete complete all as specified and directed.

Spreading and levelling soil in layers n exc. 25 cm thick, well ramming including watering as required complete all as specified and directed. Note : Soil obtained from item No. 171 shall be used.

M&L for Hard core of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and diretced.

M&L for 25 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded aggregate ) in leveling course, finish surface even and rough to receive toping layer of floor complete all specified and directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.

M&L for use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for Reinforced cement concrete (nominal mix), 1:2:4 Type B1 (using 20 mm graded stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for 5mm thick plastering on ceiling in CM (1:3) surface finished, even and fair without using extra cement including three coat of white wash complete all as specified and directed.

M&L for applying two coats of white wash including preparation of newly plastered surfaces of ceiling complete all as specified and as directed.

M&L for Cutting chases, pinning in brick walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and as directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic seat closed pattern with recessed bottom and cover with mild steel chromium plated or alluminium hinging device, making connection to trap, outgoing flushing pipe, anti sypohonage pipe 'P' or 'S' of pipe etc complete all as specified and directed.

S&F in repair brass chromium plated, fancy type 2 way bib cock screwed for iron pipes of dia 15 mm complete all as specified and directed.

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to wall complete all as specified and as directed.

S&F 75mm PVC (SWR) bends any radius complete all as specified and as directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.

S&F 110mm PVC (SWR) vent cowlcomplete all as specified and directed.

Supplying, laying, jointing and testing in trenches DWCPE (SN 8) nominal size 163 (ID)/180 (OD) dia as per IS-16098 (Part 2) : 2013 upto a depth of 1.65m with and including all items and activities required to make sewer line functional complete all as specified and as directed. Make :- Supreme/Prince/Finolex.

M&L for providing precast cement concrete 1:2:4, type B-1, (using 20 mm graded stone Agg) as in man hole cover set in CM 1:6 complete all as specified and directed.

M&L mild steel TMT bars 6 to 8mm dia, cut to length bent to shape required including cranking bending, spirally for hooking for columns hooking and binding with including mild steel annealed wire not less than 0.9 mm dia securing with clips complete all as specified and directed.

M&L for cutting into existing manholes for 150mm pipe connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

Surface excavation in any type of soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggergate) as in sub base for flooring complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade ® with gray cement and pigment complete all as specified and directed.

S&F Vitreous China Urinal, Half stall type (back or corner wall type), white including PTMT waste coupling, spreader, and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long screws, pointing around urinal back in cement connecting water pipe and waste pipe complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

S&F PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe complete all as specified and directed.

S&F 20mm bore GI tubing medium grade with all fittings and fixed complete laid in trenches complete all as specified and directed.

S&F 25mm bore GI tubing medium grade with all fittings and fixed complete laid in trenches complete all as specified and directed.

S&F 20mm dia ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed.

M&L for point wiring for one light point/ fan point with 1.5 sq.mm FRLS PVC sheathed/insulated multi stranded 1100 volts grade copper conductor cable in PVC conduit complete all as specified and directed. NOTE:- (i) PVC conduit shall be of 20mm dia (min), medium class and with it's all accessories. (ii) Terminal box shall be sunken type and suitable for switch/sockets of appropriate modules. (iii) Sheet cover of suitable modules shall be provided (iv) Proper colour code shall be followed for Phase, earth and neutral wire. (v) Cutting chases in wall (in case of concealed or resseced type point wiring), if required, shall be measured and paid separately under respective item here-in-after. (vi) Point wiring shall strictly as per relevant code. (v) Rates of all material required/mentioned above shall deemed included in quoted unit rate except switches, sockets, fan regulators, ceiling rose, lamp holders etc.

All as per item No 142 above but with 2.5 sqmm cable for one 5/6 or for 15/16 Amp socket outlet point on independent board .

All as per item No 142 above but with 2.5 sqmm cable for one 5/6 or 15/16 Amp socket outlet point on same board .

S&F switch piano flush type, single pole, one way, 5/6 Amps 230 Volts complete all as specified and directed.

S&F socket outlet, flush type, complete all as specified and directed.

S&F switch piano , flush type 15/16 amps, single pole, one way complete all as specified and directed.

S&F socket flush type suitable for 15/16 A, 5/6 pin, complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface Bakelite sheet 63.50mm dia complete all as specified and directed.

S&F fan regulator, stepped type, 120 watt single phase complete all as specified and directed.

S&F Lamp holder PVC/ Polycarbonate type with back plate complete all as specified and directed.

S&F in repair sheet metal enclosure/Distribution board for MCBs, double door type, epoxy powder coated, factory made, Triple Pole and Neutral (TPN), 4 way 415Volts with 200 amps rated copper bus bar, with enclosure blank plates for unused way complete all as specified and directed.

S&F in repair MCB TPN, 100 Amps, 415V, 10KA, 'C' curve complete all as specified and directed.

S&F sheet metal enclosure/Distribution board for MCBs, double door type, epoxy powder coated, factory made, Single Pole and Neutral (SPN), 8 way 240Volts with 200 amps rated copper bus bar, with enclosure blank plates for unused way complete all as specified and directed.

S&F in repair MCB SP, 6-32 Amps, 240V, 10KA, C curve complete all as specified and directed.

S&F in repair MCB SPN, 40-63 amps, 240V, 10KA, 'C' curve complete all as specified and directed.

S&F MCB SPN, 6-32 amps, 240V, 10KA, 'C' curve complete all as specified and directed.

Taking down carefully sub main wiring (any nos of wire and size) with earth wire , any description with all accessories complete all as specified and directed.

M&L for sub main wiring with two single core FRLS PVC insulated unsheathed multistranded copper conductor of size 6 Sqmm nominal cross sectional area and one run as continuous earth wire of similar description, drawn in and including 20mm dia 'medium grade' PVC concealed conduits (with fittings), complete all as specified and directed. NOTE: Two run of main wire and one run of earth wire with conduit shall measured as One unit length..

S&F LED tube light fittings, 20 watt fixed to wall, complete all as specified and directed.

S&F LED Mirror light fitting, 10Watt, 2 feet long including LED lamp and making connection complete all as specified and directed.

S&F in repair 36 Watt LED panel light fittings , recess mounting of size 2'x2' including making connection with PVC insulated copper conductor cable of suitable size complete all as specified and directed.

S&F in repair Building lighting luminaire, 35 Watt complete including LED Lamps with all accessories and bracket made out of 25mm bore GI pipe (light grade), 1.20 m long made to shape and fixed to existing pole or bldg by means of 2 Nos mild steel flat iron 40x6mm clamps with suitable size bolt, nuts & washers complete all as specified and directed.

Taking down carefully existing ceiling fan, wall fan & exhaust fan by disconnecting all electrical connection, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed. (NOTE: Fans shall be deposited by the contractor in AGE E/M Old Cantt yard).

S&F BLDC ceiling fan, 1200 mm sweep, BEE 5 star rated, 230 V, 50 Hz, single phase AC supply with remote or electronic regulator unit for speed control and all remaining accessories complete all as specified and directed.

S&F exhaust fan heavy duty, steel body with steel blads, 300mm sweep, single phase 240 volt including making electrical connection and writing MES No with black paint complete all as specified and directed.

S&F exhaust fan heavy duty, steel body with steel blads, 450mm sweep, single phase 240 volt including making electrical connection and writing MES No with black paint complete all as specified and directed.

S&F Air circulating fan 230 V single phase oscillating type , 600 mm sweep suitable for wall mounting complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL with top edge of plate not less than 1.50 m below GL) connected with GI wire 4.0 mm dia as earthing lead by means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, GI pipe (ISImark) light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate ) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover 1:2:4 , type B-1(using 20 mm graded crushed stone aggregate ) reinforced with 8 mm diaTMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade(ISI marked) for watering all as shown in electrical plate No 3 of SSR Part-I and connected to earth test point including testing including dismantling of old ineffective earthing complete all as specified and directed. (Note:- The rates quoted shall also deemed to include the cost of Earth test point and earth strip and protection pipe upto 7.5 meter beyond the earth plates electrode)

Supply, laying and testing (in replacement) 1.1_KV XLPE insulated PVC sheathed armoured Aluminium LT cable with stranded aluminium conductor of size 35 sq mm 3.5 core including taking down existing cable complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 M wide and not exceeding 1.5 Mtr deep and getting out complete all as specified and directed.

Returning filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft soil complete all as specified and directed.

Removing excavated surplus soil not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.

M&L for sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand up to 18 cm thick and consolidation complete all as specified and directed. Note : Punned thickness i.e. 18 cm shall only be measured for payment purpose.

Supply and laying dry well burnt locally available brick sub class 'B' old size bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as specified and directed.

S&F for 50 mm dia GI pipe 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing/hard standing complete all as specified and directed. NOTE : Excavation and earth work shall be measured & paid separately.

S&F in repair 1000 litters capacity white colour double layer, ISI marked, rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces for inlet, outlet, washout, overflow, GI tank nipple and 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball, screwed for iron pipe complete all as specified and directed.

KRISHNA BAHADUR (BID ID -3316123)

Shivam Constructions (BID ID -3313884)