8254 SPL REPAIRS TO BLDG No. P-15 RF LINE AND SPL REPAIRS TO ROOF TO ARREST LEAKAGE OF BLDG No. P-77 AT MINTSD AND PROVN OF PRE-FABRICATED SHELTER FOR CAR PARKING FACILITY NEAR BLDG No. P-74 AT MINTSD UNDER GE SOUTH PUNE

Amount

Demolition of stone slab/tiles of any description or thickness laid bedded & pointed in cement mortar in floors, hard standing Apron etc complete all as specified and directed

M&L for coloured vitrified tiles 600 x 600 x 8 mm thick as in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for coloured vitrified tiles 600 x 100 x 8 mm as in skirting/dados, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 10mm thick backing coat in CM (1:4) including triangular filleting in CM 1:4 on top of tiles complete all as specified and as directed.

M&L for coloured Non skid ceramic tiles 7 to 8mm thick(square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

M & L for 25 mm thick PCC (1:2:4) type B1 (20mm graded stone aggregate) as in leveling course of floor tiles etc complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 600x300x7mm thick of colour and pattern as approved by GE, as in vertical surface set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in CM (1:4) in etc complete all as specified and as directed.

M&L for 16-18mm thick Granite (of any type/colour) work (table rubbed and polished) in steps, pillars;window cills/jamb, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. as counters of any radious etc laid over 15mm thick screed bed in CM ( 1:6) complete all as spcecified and directed.

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and as directed.

S & F Machine cut cuddappa stone slab 20 to 25 mm thick for making cooking platform etc. complete all as spcecified and directed.

M&L for 19mm thick prelaminated particle board both side decorative face, including providing second class hard wood 6mm thick beading for edges of boardalround all as specified and directed by Engr in Charge.

S&F in repairs 40 mm dia polished hardwood cupboard Knobs fixed with nuts, screws and washer of brass polished complete all as specified and as directed.

S & F in repair contionous hinges MS bright finish or electro galvinised with of flaps 30mm complete all as specified and as directed.

S&F in repairs Magnet catches and striking plate complete all as specified and as directed.

Dismantling ceiling / boarding of any description, fixed in any position like ceiling,partition etc with nails including frame work of timber complete all as specified and as directed.

S&F for Gypsum ceiling board for ceiling prepainted, perforated finish 600x600x9 to 9.5mm thick in size of approved brand/make, laid over and including grid work of size 600x600mm, made out of 0.5mm thick GI tee 32x24mm for main, 25x24mm for cross tee and 20x20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle, hung from ceiling using 2mm thick GI suspension wires spaced at 1200mm on main runners including making niches for fans/light at as specified and directed

Taking down chowkats or frames of wooden / steel n.exc 1.5 sqm (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkats or frames of wooden / steel exc 1.5 sqm & n.exc. 4 Sqm (without taking off shutters from the frames) complete all as specified and as directed.

Taking down shutters of any description n.exc 1 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n exc 2 Sqm each complete all as specified and as directed.

S & F pressed steel frames for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

S & F pressed steel frames for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

S&F IInd class hard wood 35mm thick factory made, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F 35mm thick glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc.edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass,etc; The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated with heritage elevation as specified and directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, all as mentioned in Item No. 8095 of SSR Part-II.

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made cut of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelaminated PVC sheet 5mm thick for top rail, lock rail and bottom rail and stile and rails having one side feathered edge, on other side 10mm 90° bent edge, panelling to be fitted in MS frame welded/sealed to the stiles and rails and 15mm thick PVC sheet beading inside and decorative PVC beading of 10mm x 10mm all as specified and directed and as per product Drg given on Sl. Page No. 157 of SSR Part-II 2010

M&L for Preparation of new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S&F fixed glass ventilators using 5mm thick plain glass and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed. (a) SP - 20048 (b) Glazing clips - 19352.

S & F butt hinges 100mm size MS cold rolled medium weight complete all as specified and as directed.

S & F butt hinges 75mm size MS cold rolled medium weight complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified and as directed..

S&F aluminium sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 300 mm.

S&F aluminium anodised handles, fabricated type, of size 150 mm complete all as specified and as directed.

S &F 300mm MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18 mm & fixed with stainless steel wire staples complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced complete all as specified and as directed.

M&L PCC 1:3:6 Type C-2 using (40mm graded stone aggregate ) 75mm thick finished even and smooth without using extra cement as in plinth protection, PCC path complete all as specified and as directed.

Demolition of PCC Block/Brick masonry work in any description/position including removing debris from the site complete all as directed by Engr-in-Charge.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed by Engr-in-Charge.

Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Rendering 10mm thick in cement mortar 1:6 on concrete surfaces finished with sagol finish to plasterred surface etc complete all as specified.

Rendering 15mm thick in CM 1:4 on stone surface finished even and smooth with thin layer of sponge finish complete all as specified and as directed.

M & L preparation of new plastered surfaces of walls & applying two coats of weather shield acrylic latex paint which gives 5 year of performance warranty complete all as specified & directed.all as specified.

Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

Prepration of old painted wooden surfaces exc 10 cm width or girth and applying one coat of synthical enamel paint all as specified and directed

Dismantling of single layer mangalore pattern or similar tiles in roofing laid dry complete all as specified and as directed.

Dismantling battens for tiles, shingles etc of any size including tilting fillets spaced exc. 15 cm. complete all as specified and as directed.

Dismantling of timber scantling 40 sqcm and over in section in any position(unframed work) complete all as specified and as directed.

Dismantling of timber scantling as in fillets,rails.posts ,rafters,purlins under 40 sq cm in section complete all as specified and as directed.

S&F in repair hardwood 2nd class weather boarding, clean sawn, thickness 20mm to 25mm and rebated on thick edge to give 20mm leaps and fixed on roof ending.with heritage elevation all as specified and as directed.

S&F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F 0.63mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with ms flat clamp complete all as specified and directed

Dismantling of structural steel work including doors,gates but excluding framed Truss etc complete all as specified

M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete as directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F prepainted hard designer tiles not exc. 18sqm over 20 mm thick screed bed in CM 1:4 and pointed with coloured cement look heritage finish complete all as specified and as directed.

Preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

S&F in repair cast iron Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

M&L for (SWG) gulley trap 150mm setting and jointing with solvent cement complete all as specified and as directed.

Dismantling existing water tanks 250 lit/ 500 lit/1000 ltr capacity and removing to store complete all as specified and as directed.

S&F in replacement PVC water storage tank ISI marked rotational moulded double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of 1000 lts capacity

Taking up or down carefully steel tubing and connection s including cleaning for refixing or removal to store of following size :-

15mm bore

20mm bore

S&F GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc of following size :-

15mm bore

20mm bore

Refixing old steel tubing and connections in new or old position (wall, ceilings, floors etc) of following size :-

15mm bore

20mm bore

M&L for cutting chases, pinning in making good to face for concealed water tubing complete all as specified and as directed.

Dismantling of CI / AC/ PVC pipes of various dia jointed in CM or adhesive 75 to 100mm dia complete all as specified and as directed.

S&F for 110 mm dia PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall including clamp etc complete all as specified and as directed.

S&F for 75 mm dia PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall including clamp etc complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius 75 mm bore complete all as specified and as directed.

S&F stainless steel, sink 1 mm thick for kitchen or laboratory, with plugs, waste pipe, washers; incl bedding in cement mortar on to dwarf wall or including fixing cantilever CI Brackets, connecting union etc & connecting to inlet/out let for smooth functioning size of sink 495 x 420mm overall and bowl size 410mmx330mmx160mm, including PVC connection, CP waste coupling, etc. complete all as specified and as directed

S&F looking mirror of size 600 x 450mm approved quality and make , mounted on 6 mm thick plywood commercial as backing and aluminium powder coated frame all around on edges complete all as specified and as directed.

S&F coloured counter type wash basin fixed over granite top and vertical sides with full round edge polish including cuddapa stone slab on top and vertical sides with CP waste coupling, chain and plug, waste fitting, union and waste pipe 32mm dia of required length and all necessary inlet and outlet connections complete. Make – Hindware, Zen Cat No 10049

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' white, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S & F in repair for Wash Hand basins, Vitreous China, white, flat back, size 550x400mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed.

S&F in repair vitreous China wash down (EWC) water closet pan (Pestal Colour), Two piece closet including cistern and premium seat cover with 'S' or 'P' trap complete all as specfied and directed. (Make : Hindware (Magna) Cat Part No. 20085, 21053 or equivalent make such as Parryware and Cera.)

M&L for providing and fixing CP toilet fitting in repairs as specified and as directed by the Engr -in-Charge for the following:-.

Wall mixer 3-in-1 including telephone shower for 15mm bore of pipe conforming to CAT No. CON-267 of "Jaquar" or of Equivalent make specified here in after

Bib taps CP 15mm bore fancy type conforming to CAT No. CON-039 of "Jaquar" or of Equivalent make specified here in after

CP towel rail 20mm dia and 600mm long including brackets conforming to CAT No. ACN-1111N of "Jaquar" or of Equivalent make specified here in after

CP toilet paper holder conforming to CAT No. ACN-1151 N of "Jaquar" or of Equivalent make specified here in after

CP towel ring conforming to CAT No. ACN -1121 N of "Jaquar" or of Equivalent make specified here in after

CP shower rose 125mm dia with arms for 15mm bore of pipe conforming to CAT No. OHS-489 of "Jaquar" or of Equivalent make specified here in after

CP 15mm bore concealed stop cock with long neck conforming to CAT No. CON-069 of "Jaquar" or of Equivalent make specified here in after

CP Soap dish CAT No. ACN-1131 N

Two way bib cock with wall flange 15mm dia Cat No. 7041

CP health faucet (ABS body) with 1 mtr long PVC type & wall hook conforming to CAT No. ALD-BLK-583.

CP health faucet/Jet spray assembly including CP duel cock.

S&F in repair 8 mm thick corner glass with D bracket complete all as specified and as directed.

S&F in repair 10mm thick corner glass with D bracket complete all as specified and as directed.

S& F in repair PVC cabinet with looking mirror, single shutter of size 600X450X150mm as per sample.Prayag/Commander complete all as specified and directed

S & F aluminium powder coated brackets suitable for 20mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed by Engineer-in-Charge.

S&F aluminium powder coated fancy type curtain rod 20mm bore all as specified and directed by Engr-in-Charge.

S&F in repair, CP stop valve 15mm dia cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes for unions complete all as specified and as directed.

Supply and fix in repairs, stainless steel plate rack of size 36inch x 31inch x 10inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), S S screws and round pipe, fixed to wall with screws complete all as specified and as directed. (Make – Blue Star Silver Shine Cat No.KPR-315 or equivalent from Nirali/ Jain Brothers Sanitation Pvt Ltd (Jayna) as approved by GE.)

Repair & Easing of wooden window shutter/CB shutters (One unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening tightening of hinges or changing or supply and fix in the position of hinges, adjustement of tower bolts sliding bolt and haps and staple etc complete all as directed

Repair & Easing of wooden door shutter/ Glazed door shutters (One unit shall comprise of one door /Showcase irrespective of number of leaves) for properly closing/opening tightening of hinges or changing or supply and fix in the position of hinges, adjustement of tower bolts sliding bolt and haps and staple etc complete all as specified and as directed.

M&L for RCC type B1 -1:2:4 (20 mm graded stone aggregate) in foundation including rafts, footing, foundation beams, plinth beam bases for columns, etc basement slabs under reamed piles and mass concrete complete all as specified & directed

M&L for RCC type B1 -1:2:4 (20mm graded stone aggregate ) as in columns ,piers ,posts and struts all as specified and directed.

Form work to sides of pillars ,posts ,struts,piers columns and stanchion rough finished surface of concrete flats all as specified & directed.

M&L for RCC type B1 -1:2:4 (20mm graded stone aggregate ) as in beams, cantilivers, bressumers, lintels over 1.5 mtr span complete all as specified and directed.

M&L for TMT bars,10mm dia & over , cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for TMT bars,8mm dia & over in stirrups,spacers, cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Form work to sides and soffits of floor or roof beams beam haunching, girders ,bresummers, lintels, cantilevers , shelves including supports,overhangs etc also splays between floors and beams etc complete all as specified & directed

M&L for Complete removal of existing treatment on walls by scrapping washing rubbing down etc and applying two coats of Exterior emulsion paint over a coat of primer all as specified and directed

M&L for two coats of oil emulsion distemper over a coat of clearcolle on plastered and other surface, preparatory to distemper including preparation of old plastered surfaces complete all as specified and as directed.

Removing of old water proofing treatment incl screed bed and cleaning the surface of slab with wire burshes removing dust foregin material incl flushing at junction of wall and removing the rubbish off the premises to a distance exc 500 m complete all as specified and as directed.

M & L water proofing treatment to roof slab, wall, chajjas etc; shall be carried out as specified below and as directed by Engr-in-Charge (a) M & L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces (b) Preparing plastered surfaces of roof slab, walls, chajjas etc; by proofing with broom sweeping free from dust etc; evently applying a coat of approved bitumenous primer @ 0.20 Kg/Sqm of area complete all as specified (c) Laying APP polymer modified glass fibre approved membrane,weighing not less than 3.50 Kg/Sqm with laps & overlaps as specified & joints sealed and applied complete by torch appplication method all as speciifed & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepage and rectifying the same to the entire statisfactory of GE (d) Finally applying a coat of solar reflective bitumenous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as speicifed & as directed by Engr-in-Charge Note : APP shall be 4mm thick with modified glass fibre having tensile strength 440 Mpa and elongation as 2mm (Make : Asian paints or equivalent).

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 lit capacity hoisted and fixed in position all as specified in SSR Part I

Disconnecting existing water storage tanks of any capacity not exc. 1000 ltrs and setting aside or lowered if required and refixng in the same position after carryout necessary roof treatment including necessary fittings (float valve,tank nipple and GI pipes) if required complete all as specified and as directed.

Supply and fix in repair 20mm bore Gun metal gate valve with iron wheel head, screwed both ends for iron pipes, complete all as specified and directed.

S&F 20mm bore ball brass valve, high pressure with polythine float and fly nut complete screwed for iron pipe or brass ferule complete all as specified and directed.

S&F in repairs 20mm bore ball brass valve, high pressure with polythine float and fly nut complete screwed for iron pipe or brass ferule complete all as specified and directed.

M & L for PCC 1:2:4 type B1 (20 mm graded aggregate) as in roof kerbs, benching rounded or chamfered on edge, water tank plateforms etc all as specified complete all as directed at site.

Excavation in pot holes (or similar holes) each n.exc 0.50 cum getting out, returning filling and ramming of earth or broken rubble mixed with earth around in layers not exc 25 cm in soft/ disintegrated rock.

S&F Prefabricated Tensile Car Parking Shed with the following Specification: (a) Tensile fabric (Galvalume sheet 0.5mm thick) (b) MS Coil Section (c) Aluminium and Metal Joint (d) Red oxide with paint (e) Self tapping Screws and all fitting/fixtures required

S & F Endura tiles 15-20mm thick over screed bed in CM 1:4 complete all as specified and as directed. (Make : Johnson / Somany or equivalent)

M&L Plain Cement Concrete type B1 1:2:4 (20mm graded aggregate) as in Coping, Edging etc complete.

Taking down point wiring (light, fan, socket or power) any type complete, including fixtures and fittings such as switches, ceiling roses, pendants,regulators sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Taking down old unserviceable / worn out aluminium sub main of any type and size complete all as specified and as directed.

Taking down old unserviceable /worn out DB,s any type and size complete all as specified and as directed.

M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade ISI-694 marked Makes of cable - Finolex/Havells/Polycab in and including heavy duty,in and PVC casing caping including all accessories with modular sunken boxes concealed in wall with earth dolly duly covered with modular plate inner and outer metal flux boxes, cover plate with frame of suitable size for modular accessories switches/sockets etc Make of modular sunken boxes/ inner & outer plate -Legrand (Myrus) or equivalent in Havells in Honey well including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly for the following including making good the disturbed surfaces and matching with existing colour in two coats complete all as directed and specified .

One light/fan point controlled by one switch and regulator

Switch Socket outlet, three pin, 5 Amp, independent

Bell/Buzzer points controlled by one bell push.

One switch socket outlet, three pin 5 amps on the same board

M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade ISI-694 marked Makes of cable - Finolex / Havells / Polycab in and including heavy duty, in and PVC casing caping including all accessories with modular sunken boxes concealed in wall with earth dolly duly covered with modular plate inner and outer metal flux boxes, cover plate with frame of suitable size for modular accessories switches / sockets etc Make of modular sunken boxes/ inner & outer plate -Legrand (Myrus) or equivalent in Havells in Honey well including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly for the following including making good the disturbed surfaces and matching with existing colour in two coats complete all as directed and specified .

S & F modular switch 6A,one way 1 module complete all as specified and directed.

S & F modular switch 16A,SP one way 1 module complete all as specified and directed.

S & F modular sockets 6A, 2/3 pin universal combine 2 module complete all as specified and directed.

S & F modular sockets 6/16A, 2/3 pin combine 2 module complete all as specified and directed.

S & F modular switch 6A,one way SP bell push 1 module complete all as specified and directed.

Supply and fix modular step fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S&F bell electric ding dong including teak wood board complete all as specified and as directed.

S&F ceiling rose surface type, three terminals complete all as specified and as directed.

M & L for Sub main wiring complete with two single core 4 sqmm ,1100volts grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor of 4 sqmm in and including casing caping including cutting chases, pinning in. making good to facings where required complete all as specified and as directed. (Note :- Three runs of 4.0 sqmm cable, and one run of PVC casing caping t will be measured as one unit all as specified and as directed)

M & L for Sub main wiring complete with two single core 6 sqmm, 1100 volts grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor of 6 sqmm in and including casing caping including cutting chases, pinning in. making good to facings where required complete all as specified and as directed. (Note :- Three runs of 6.0 sqmm cable, and one run of PVC casing caping t will be measured as one unit all as specified and as directed)

M & L for Sub main wiring complete with four single core 6 sqmm, 1100volts grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor of 2x6 sqmm in and including casing caping including cutting chases, pinning in. making good to facings where required complete all as specified and as directed. (Note :- Six runs of 6.0 sqmm cable, and one run of PVC casing caping t will be measured as one unit all as specified and as directed)

S&F IP-54, IK 09, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 8 way, 24 modules suitable for accommodating 100 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed in wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing (Make - Legrand cat no-5077 52 / ABB/L&T.) (Note :- MCCB 100 Amps 4 pole 25 KA with electronic protection unit as incomer will be measured seprately in relevant item.)

S&F IP-54, IK 09, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 4 way, 12 modules suitable for accommodating 100 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed in wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing (Make - Legrand cat no-5077 50/ ABB/L&T) (Note - MCCB 100 Amps 4 pole 25 KA with electronic protection unit as incomer will be measured seprately in relevant item.)

S&F MCB DB 8 way ,double door, with 200 amp rated busbar 240 V, SPN recess mounted/wall mounted all as directed and specified.

S&F MCB DB 4 way double door with 200 amp rated busbar, 240V SPN recess mounted/wall mounted complete all as directed and specified.

S&F MCB SP 6-32 Amps,10KA,'C' series complete all as specified and as directed.

S&F MCB SPN 10-40 amps,10KA, 240V,'C' series complete all as specified and as directed.

S & F Sheet metal, 20 amp Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 10 KA breaking capacity, 'C' series, 240 V complete all as specified and as directed.

M & L for Earthing complete with galvanised steel earth plate electrode '60cm × 60cm × 6mm thick, buried 'directly in ground (earth pit not less 'than 2.25 metres deep below normal ground 'level) with top edge of the plate not 'less than 1.5 metres below normal ground level', connected to 'galvanised iron strip 32x6mm by means of bolts, nuts, check 'nuts and washers of galvanised iron or steel earth strip protected by provision of GI 'medium grade' pipe 40mm bore including provision of concrete pit in PCC (1:2:4) type B1 (using 20mm graded stone aggregate) with 40mm thick cover in RCC (1:2:4) type B-1 reinforced with XPM (weight not less than 4 kg/sqm) and frame made out in MS angle iron of size 25x25x3mm with lugs 02 Nos and with MS handle made in 6mm dia round bar made to shape, including GI 'medium grade' 20mm bore pipe for watering, perforated at bottom 1.75m long placed on top edge of earth plate including provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate, test point made out of phosphorus bronze with fixing arrangement ,funnel, wire mesh and earth work in hard/dense soil returning filling in and removal of surplus soil to a distance not exceeding 50mtr all as shown in electrical plate No. 3 of SSR Part I 2009 connected to earthing test point all as specified or indicated 'including testing on completion. (NOTE:-GI strip and GI pipe 40mm bore medium grade for encasing GI strip upto 7.50m length per earthing shall be deemed to be included in the unit rate.)

M & L for Earthing with galvanised steel earth plate electrode 600 x 600 x 6.0 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to a depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete all as specified and directed.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required for 32x6 mm galvanized iron strip, complete all as specified and directed.

M & L For fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 4 sqmm GI Wire complete all as specified and as directed.

Supplying and fixing LED light fitting,1X18 Watt surface mounted LED high efficiency LED luminare aluminium linear batten ingress protection : IP66 with white acrylic cover comprises pre-wired with high efficiency electronic driver, high translucent frosted diffuser gets glare free, smooth light distribution complete all as specified and as directed. (Make :- Bajaj cat No. - 830192 or of equivalent in Wipro/Philips.)

Supply and fixing Integral LED Street Light Luminaire 20 W comprising of epoxy powder coated aluminium housing, enclosed with glass cover in frame with GI PIPE of suitable size for fixing with fitting and fixing on wall complete with accessories conforming to Cat Part No : BRP022 LED 20CW MR S1 PSU GR of Philips or of equivalent in WIPRO/BAJAJ specified here-in-after.

Supply and Fix MCCB 100 Amps,25 KA,4 Pole,415V, electronic protection unit model of Legrand Cat Part No- 420315 or equivalent in L&T/ABB complete all as specified and as directed.

Supply and fix in repairs LED mirror light fittings wall mounted type suitable for 1x10 watt with high output diffuser and all fixing arrangements Cat Part No BN021 LED 10S-6500 PSU GRS1 as per Philips or equivalant to Bajaj/Havells complete all as specified and as directed.

S&F lamp holder (Angle/bracket) insulated body, with back plate complete all as specified and as directed.

Supply and fix plastic exhaust fan , noise free, AC single phase 230/ 240 volts of size 250 mm sweep and all fixing arrangements such as plywood 18mm thick all as per the directions conforming to Bajaj Cat Part No-70049 or equivalent in Philips/ Havells complete all as specified and as directed.

M&L for cutting and making hole into or through cement concrete or stone masonry wall of thickness upto 45cm and in girth not exc 45cm for fixing exhaust fan of size 250mm sweep & providing fastners grouted in wall four nos inside for fixing of Exhaust fan and redressing the surface and making smooth with cement plaster 1:4 to match existing surface including lime white wash all as specified and directed.

Taking down geysers of 25/50 liters capacity carrying to workshop for repairing to leakage, servicing, cleaning etc, replacement of thermostat, heating element, indicator lamp and thermal cut out including fixing of PVC cable, sheathed, three core with stranded copper conductor of size 2.5 sqmm and refixing the geysers at location complete all as specified and directed.

Taking down Ceiling fans & removing to workshop for servicing, cleaning, lubricating, replacement of split pin, rubber bush and other spare required if any including fixing PVC cable with stranded copper conductor of size 0.75 Sqmm and refixing the fans at the same locations complete all as specified and directed.

Taking down Electric meter with connected accessories any type any size and making good with disturbed surface with filling of bricks works and cement plaster including two coats of cement base paint, Supply install, electric meter box suitable for any type electric meter with MCB DP 32 amps including fixing PVC cable with stranded copper conductor of suitable size, test and commissioning of free standing wall mounted, dust, weather and vermin proof meter board, indoor type, fabricated with 2.0mm thick CRCA MS sheet for load bearing members with transparent doors for reading and pad lock complete all as specified and directed.

Supply, laying, testing and commissionnig of Galvanized steel water tubing 25 mm ,medium grade,including provision of specials such as bends, elbows, tees,unions etc laid in trenches complete all as specified and directed

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables etc. and getting out in the following type of strata complete all as specified and as directed by the Engineer-in-Charge.

Soft/Loose soil

Hard/ Dense soil

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick Soft/Loose soil/ Hard/ Dense soil complete all as specified and as directed by the Engineer - in - Charge.

Removal of excavated material [soil] of any strata to a distance not Exc 50 m and depositing where directed at a level not exc 1.5m above the starting point where directed complete all as specified and as directed.

Supply and fix in repairs gun metal gate valve with iron wheel head screwed both ends for iron pipe of size 25 mm bore complete all as specified and as directed.

Cutting existing steel tubing size 40mm bore for insertion of tee 40x40x25 mm including necessary joints for branch connection complete all as specified and as directed.

M&L for Construction of PCC solid block Masonry valve chamber of size 900x900x1000mm(Internal dimensions)with PCC foundation 1:4:8 type D2 using 40mm graded stone agrregate 150m thick,150mm wide offsets around over 100mm thick hard core,200mm thick PCC solid block walls built in CM 1:6, 50mm thick PCC 1:2:4 type B-1 coping finished even smooth,redering 10mm thick in cement mortar(1:6),finished even and smooth without using extra cement internally including top of floor including excavation earthwork in hard / dense soil,3mm thick MS sheet cover fixed on 25mmx25mmx6mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handles and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to distance not exceeding 50m etc.,complete all as specified and directed.

Supply, laying, testing and commissionnig of UG LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel/MCCB in bldg etc to suit the cable laid in trenches/ fixed to poles/drawn through pipes complete of sizes 35 Sqmm 3.5 core

M&L for Reinforced concrete pipes,class NP2 with one collar per lengh of pipe of dia 100 mm ,half round (02 Nos for top & bottom) complete all as specified and as directed.

S&F GI tubing 50 mm dia Light grade for cable protction laid in wall /floor / pole with MS clamp , bolt nuts including taking down complete all as specified and directed .

Supply & Fix MCCB enclosure suitable for accommodating 100 Amps MCCB, 4 pole, 25 KA breaking capacity 415 volts for fixing in sheet metal enclosure with proper space all around enclosure for operating properly of suitable size for out door installation factory made both front and rear side double door system, fabricated with 3.15 mm thick CRCA sheet for load bearing members and 2 mm thick for doors and covers and shall be painted witrh epoxy powder paint by means of electro static gun after rigorous pre treatment comprising of cold phosphating process on all internal and external surfaces after due preparation of surfaces and fixing in existing LT panel by opening panel front and back side and extending existing size bus bar of the panel, connecting with nut bolts, providing sleaves on bus bar and fixing new MCCB 100 Amps 4 pole and connecting out going LT cable with new MCCB enclosure with lugs, ferrules complete connection all as directed (Note - MCCB 100 Amps 4 pole 25 KA with electronic protection unit will be measured seprately in relevant item.)

Gauri Associates

Anand Trading Co

Raj Construction Company

shiva traders

TRINITY ENGINEERS