CAMOUFLAGE PAINTING TO CERTAIN BLAST PENS, TRANSVERSE WALL, BLDGS, PERIMETER WALL AND OTHER B/R WORKS IN DOMESTIC AREA, WSA-I, WSA-II AT AFS ADAMPUR

M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in copings, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed.

M&L for Brick work using bricks straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified and directed.

M&L for Brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:6), complete all as specified and directed.

M&L for 100 mm thick, cement concrete type D-2, (1:4:8) using 40 mm graded crushed stone aggregate, finished even & rough, as in sub floors, complete all as specified and directed.

M&L for 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of shape approved by GE, made by table vibratory method using PU mould, laid in required pattern over and including 50 mm thick compacted bed of coarse sand, compacting through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

M&L for 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of shape approved by GE, made by table vibratory method using PU mould, laid in required pattern over and including 50 mm thick compacted bed of coarse sand, compacting through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4) mixed with water proofing compound as per manufacturers instructions,complete all as specified.

Supply only water proofing compound, ISI marked, complete all as specified and directed.

Uprooting tree/plants upto 30 cm girth from wall or any part of building upto double storey buildings completly to the entire satisfaction of Engineer-in-Charge, making good the disturbed portion and filling holes in cement mortar (1:3) or PCC (1:2:4) type B-1 using 20mm graded stone aggregate to match with existing surfaces and removal of rubbish outside MOD land complete all as specified.

M&L for Prepration of old plastered or un-plastered surface of ceiling and applying one coat of white wash complete all as specified and directed.