CONSTRUCTION OF PROPOSED SHOP AND HIGH RISE RESIDENTIAL COMPLEX AT NEELBAD NEAR DUESEHARA MAIDAN (BLOCK A B) WARD NO 26 ZONE NO 06

Amount

CONSTRUCTION OF PROPOSED SHOP AND HIGH RISE RESIDENTIAL COMPLEX AT NEELBAD NEAR DUESEHARA MAIDAN (BLOCK A &B) WARD NO 26 ZONE NO 06

Boring/drilling bore well of required dia perfectly vertical to receive casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipments, tools, plants and machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level. All types of soil:

Boring/drilling bore well of required dia perfectly vertical to receive casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipments, tools, plants and machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level. Rocky strata including Boulders.: 200 mm dia.

Boring/drilling bore well of required dia perfectly vertical to receive casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipments, tools, plants and machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level. Rocky strata including Boulders.: 200 mm dia.

Supplying, assembling, lowering and fixing in vertical position in bore well UNPLASTICIZED PVC MEDIUM WELL CASING (CM) PIPE OF REQUIRED DIA CONFORMING TO IS : 12818 INCLUDING REQUIRED HIRE AND LABOUR CHARGES FITTINGS AND ACCESSORIES ETC. ALL COMPLETE FOR ALL DEPTHS AS PER DIRECTION OF ENGINEER-IN-CHARGE. 200 MM DIA

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia

Providing and fixing M.S. CLAMP of recquired dia made of 100x10mm flat top of casing/housing pipe of tubewell as per is: 2800(part i) including necessary bolts and nuts of required size complete.

TUBE WELL PUMP SET L.S

GALVANIZED OCTAGONAL POLES PROVIDING AND ERECTING 12.5 MT HIGH MAST LIGHTHING WITH INTEGRAL POWER TOOL WEIGHT 340 KG HAVING TWO SECTTION HO HOT DIP GALVANIZIED MATERIAL AS PER BSEN ISO 1461 THICK OF 3 MM DIA 100 TOP AND 360 BOTTOM RESPECTIVELY THE MAST SHALL BE STRESS FITTED AT SITE WITH 250 MM OVER DYNAMIC LOADING TO WITHOUT MAXIMUM WIND PRESSURE AS PER IS 875 PART III AND PARMETERS OF STRUCTURES AND FOUNDATION DESINGN SHOULD BE TAKEN FORM WIND TUNNEL TEST THE MAST SHALL HAVE LIGHTING PROTECTION OF GI SINGLE SPIKE OF DESGNATED LENGTH AT TOP. THE BASE INSIDE COMPARTMENT WITH DOUBLE INTERNAL LOCAK WITH ADEQUATE SIZE OF MCB MOUNTED ON PVC BOARD COMPLETE WITH BASE PALTE OF 25MM THICK 520 MM DAIMETER AND FOUNDATION BOTS HAVING 4 NOS BOTS OF 24MM DAIMETER (TS 600) ANCHOR PLATE 445 PCD INCLUDING ACCESSORIES VIZ (1) LANTERN CARRIAGE OF 50 OD ERW CALSS B PIPE COVERED WITH PVC SLEEVS SUITABLE TO CARRY 250KG LOAD AND UPTO 6FITTING SYMM METRICALY (2) TRALILING COPPER CABLE OF 5X2.5 SAMM PVC INSULATED PVC SHETEHED (3) DOUBLE DRUM WINCH HAVING GEAR RETION 5:3:1 OIL BATH (SAE/90/140) ARRANGEMENT TO BE TYPE TESTED FROM NIT OR IIT FOR (4)2NOS STAINLESS WIRE ROPES 6MM DIAM ETER (7/19) OREAING LOAD CAPACITY 1450KG X2 (5) INTEGRAL POWER TOOL 3 PHASE 0.75 HP TO 1HP 2M/MIN SINGLE SPEED (6) AUTOMATIC ASTRONOMICAL TIMER PANEL COMPLETE IN ALL RESPECT OF L &T, INDOASIAN C&S HAVELLS MAKE SUITABLE FOR SIZE OF CONTA CTORS FOR LIGHTING AND POWER TOOL, 2 NOS OUTGOING REVERSING SWITCH FOR MOTOR...

LED 300 WATT SUPPLY AND INSTALLATION OF LIGHT EFFICIENCY LED FLOOD LIGHT IUMINARIES WITH HIGH PRESSURE DIE CAST ALUMINUM BODY (MAKE EMBOSSING ON BODY ) WITH TOUGHENED GLASS/POLYCARBONATE COVER THE FITTING SHOULD BE IP66 IK-10 WITH POWER FACTOR >0.9 THE COLOR TEMP OF THE LED SHOULD BE 5000 K-5700K WITH COLOR RENDERING INDEX >70 THD LESS THAN 20% THE TOTAL SYSTEM OUTPUT SHOULD BE NOT LESS THAN 110 LUMENS/WATT & TOTAL WATTAGE SHOULD NOT BE MORE THAN 300W+5W THE LED FITTING SHOULD HAVE L70 LIFE OF MORE THAN 5000 BURNING HOURS AT 35 DEGREE AMBIENT TEMP. SURGE PROTECTION SHOULD BE MORE THAN 4KV INTERNAL AND 10KVEXTERNAL THE LED SHOULD HAVE INDIVIDUAL OPTIC LENSES AND BAT WING PHOTOMETRY SUITABLE FOR STREET LIGHT THE LED FITTING SHOULD BE PROVIDED WITH2 YEAR GUARANTEE FOR FREE REPAIRING/MAINTENANCE OR REPLACEMENT OF LED LIGHT FITTING LED DRIVER SURGE PROTECTOR TOUGHENED GLASS/POLYCARBONATE COVER ETC. ON STAMP PAPER WITH SERVICE CENTER DETAILS LM-79-80 REPORT WITH BATCH NO OF SUPPLY MUST BE SUPPLY AT THE TIME OF DELIVERY BIS CERTIFICATE IS MUST BE SUBMITTED WITH CATALOGUE/MODEL NO SPARE PART LIST OF DRIVER COVER AND LED MUST BE SUBMITTED BEFORE SUPPLY ITEM AND PHILIPS CROMPTON BAJAJ HAVELLS WIPRO C&S KESLEC SCHREDER MAKE

SUPPLY AND INSTALLATION OF LIGHT EFFICIENCY LED FLOOD LIGHT IUMINARIES WITH HIGH PRESSURE DIE CAST ALUMINUM BODY (MAKE EMBOSSING ON BODY ) WITH TOUGHENED GLASS/POLYCARBONATE COVER THE FITTING SHOULD BE IP66 IK-10 WITH POWER FACTOR >0.9 THE COLOR TEMP OF THE LED SHOULD BE 5000 K-5700K WITH COLOR RENDERING INDEX >70 THD LESS THAN 20% THE TOTAL SYSTEM OUTPUT SHOULD BE NOT LESS THAN 110 LUMENS/WATT & TOTAL WATTAGE SHOULD NOT BE MORE THAN 300W+5W THE LED FITTING SHOULD HAVE L70 LIFE OF MORE THAN 5000 BURNING HOURS AT 35 DEGREE AMBIENT TEMP. SURGE PROTECTION SHOULD BE MORE THAN 4KV INTERNAL AND 10KVEXTERNAL THE LED SHOULD HAVE INDIVIDUAL OPTIC LENSES AND BAT WING PHOTOMETRY SUITABLE FOR STREET LIGHT THE LED FITTING SHOULD BE PROVIDED WITH2 YEAR GUARANTEE FOR FREE REPAIRING/MAINTENANCE OR REPLACEMENT OF LED LIGHT FITTING LED DRIVER SURGE PROTECTOR TOUGHENED GLASS/POLYCARBONATE COVER ETC. ON STAMP PAPER WITH SERVICE CENTER DETAILS LM-79-80 REPORT WITH BATCH NO OF SUPPLY MUST BE SUPPLY AT THE TIME OF DELIVERY BIS CERTIFICATE IS MUST BE SUBMITTED WITH CATALOGUE/MODEL NO SPARE PART LIST OF DRIVER COVER AND LED MUST BE SUBMITTED BEFORE SUPPLY ITEM AND PHILIPS CROMPTON BAJAJ HAVELLS WIPRO C&S KESLEC SCHREDER MAKE

AUTOMATIC TIMER PANEL 110A SUPPLY AND INSTALLATION OF AUTOMATIC TIMER PANEL OF POWDER COATED SHEET STEEL ENCLOSUER SURFACE MOUNTED HAVING ASTRONOMICAL TIME SWITCH CONTECTER MCCB MCB REQUIRED ALL MATERIAL INCLUDING PVC CABLES ETC COMPLETE IN ALL RESPECT OF INDOASIAN HAVELLS SCHNEIDER L&T MAKE OLNY WITH 24 MONTHS GUARRANTEE

Supply and installation of modular AC switch socket of required Amp of Havells, L&T, C&S, Indoasion, legrand, Cromation make

Supply and installation of Dominto LED recess or surface mounting as required low depth aesthetically designed LED 2X2 flat panels to enhance the delight of occupants with comfortable experience through its classic design and glare free soft illumination. equivalent to BCTBLR 36W LED FP CW complete in all respect with 1 year guarantee for repairing /free replecment. Philips, Crompton, Bajaj, Wipro, Havells, Keslec shreider, C&S, Panasonic make only

Supply and installation of Skylux LED recess or surface mounting as required 1X1LED luminaire to enhance the delight of occupants with comfortable experience through its classic design and glare free soft illumination white powder coated CRCA housing with LEDs. seamless front frame with flat white high transmission acrylic cover. equivalent to BZRSQL 18W WH complete in all respect with 1 year guarantee for repairing/free replecment. Philips, Crompton, Bajaj, Wipro, Havells, Keslec shreider, C&S, Panasonic make only

Supply and installation of Sleek RD LED sleek round recess or surface mounting LED downlight as required with AL die-cast body, finish with drop down PC siffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation. equivalent to BGSLO SLEEK 15 W WH RD complete in all respect with 1 year guarantee for repairing/free replecment. Philips, Crompton, Bajaj, Wipro, Havells, Keslec shreider, C&S, Panasonic make only

supply and installation of Sleek RD LED sleek round recess or surface mounting LED downlight as required with AL die-cast body,finish with drop down PC siffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation .equivalent to BGSLO SLEEK 6W WH RD complete in all respect with 1year guarantee for repairing /free replecment. philips,crompton,Bajaj,Wipro,Havells,Keslec shreider ,C&S,Panasonic make only with AL die-cast body,finish with drop down PC siffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation .equivalent to BGSLO SLEEK 6W WH RD complete in all respect with 1year guarantee for repairing /free replecment. philips,crompton,Bajaj,Wipro,Havells,Keslec shreider ,C&S,Panasonic make only

supply and installation of LED tube light 20 watt complete philips Crompton Bajaj,Havells,Wipro,Havells,keslec schreder make

Supply and Installation of 11 KV polymer dise isulator for 11KV overhead lines complete with galvanized strain hardware ,clamp,bolts,nuts,washer etc.as required as per MPMKVVCL Specification and approved make only

and erection of 11 KV(45KN)polymer disc.isulator for 11 KV overhead lines with galvanized strain clamp,bolts,nuts, washer etc as required (AS per MPMKCC specification and make only)

Supply and installation of 11 kv polymer lighting arrestor gapless type with all required accessories as per MPMKVVCL specification and approved make

Supply, installation, testing and commissiong of DTR 11/0.4 KV BIS EE level III Conventional 200 KVA as per MPMKVVCL specification and approved make

Supply and installation of anti climbing devices (barbed wire 3.5 kg) GS 2.5 mm dia (12 swg)

Supply & fixing of XLPE 1 core unarmoured 150 sqmm Aluminium conductor cable of 1100 volts as per MPMKVVCL specification and approved make

Supply & installation of 11 KV S. clamp with attachment for AB cable

Supplying & installation of Dead end clamps as per MPMKVVCL specification and approved make

Supplying & laying of LT XLPE AB cable 3x150+1x95 insulated neutral+1x35 sqmm 1100 volts as per MPMKVVCL specification and approved make

supplying installing, testing & commissioning of outdoor H.T., AB switch 11 kV, 400A. polymer assembly set gang operated with brass contact parts, including required GI pipe operating rod, handle & locking arrangement on On - Off position confirming to IS complete with required material complete the job as required as per MPMKVVCL specification and approved make

Supply & fixing of XLPE 1 core unarmoured 300 sqmm Aluminium conductor cable of 1100 volts as per MPMKVVCL specification and approved make

Supply & fixing of single phase service connection box incomming upto 25 mm squre and 8 nos. out going 10 mm as per MPMKVVCL S pecification and approved make

Supply and installation of high precision thread through Composite meter upto 150/200 KVA as per MPMKVVCL Specification and approved make

Supply and installation of AB cable hanging clamps as per MPMKVVCL spetification and approved make

Supply and installation of clamps for neutral for AB cable as per MPMKVVCL spetification and approved make

Supply and installation of Piercing connector type-I for Single Phase/three phase main 16-50 sqmm tap off as per MPMKVVCL spetification and approved make

Supply and installation of Piercing connector type-II for Single Phase/three phase main 16-50 sqmm tap off as per MPMKVVCL spetification and approved make

Fencing of transformer 37 feet of 6 feet with on ms angle of 50x50x6 mm 7 No. 7 feet hight with double gate 2 No.- 2.5x5 set of ms angle 25x25x4 mm with mesh and locking arrangement complete in all respect as per MPMKVVCL spetification

Supplying and drawing All Aluminium Alloy conductor (AAAC) 0.10 sq.inch of approved make confirming to IS 398-1979 Pt. IV, including binding at existing insulator, jointing, jumpering, tearing off, connecting etc. as required including clearing of obstacles (if any)

jointing sleeves suitable for dog 100sqmm aluminium equivalent AAAC conductor

Supply and installation of Bimetalic Clamp distribution transformers bushing

Supply and installation of Bimetalic Clamp sutable for 12 mm dia stud and 80 sqmm AAAC

Supplying, installing, testing and commissioning of LT Distribution Box with TPN isolator of 600 amper on incoming,bus bar and 6 S.P.M.C.C.B.of 120 A".on outgoing side for 200 KVA transformer

Supply and instllation of 11 KV polymer DO fuse unit set of 3 nos. as per MPMKVVCL specification and approved make

Supply, installation, testing and commissiong of DTR 11/0.4 KV BIS EE level III Conventional 100 KVA as per MPMKVVCL specification and approved make

Labour charges for hard rock cutting

Supply and instllation of chem rod 50 mm dia and 200 mm long as per MPMKVVCL specification and approved make

I bolts of 16 mm

Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 1239/3589 i/c fittings like elbows, tees, anges, reducer, jointing with nuts bolts, gaskets and welding etc.and fixing the pipe on wall/ ceiling with sutable hangers, clamps,supports, as required and painting with two or more coats of synthetic enamel paint of required shade complete as directed by Engineer-in-Charge. 150mm dia

Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 1239/3589 i/c fittings like elbows, tees, anges, reducer, jointing with nuts bolts, gaskets and welding etc.and fixing the pipe on wall/ ceiling with sutable hangers, clamps,supports, as required and painting with two or more coats of synthetic enamel paint of required shade complete as directed by Engineer-in-Charge. 200mm dia

Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 1239/3589 i/c fittings like elbows, tees, anges, reducer, jointing with nuts bolts, gaskets and welding etc.and fixing the pipe on wall/ ceiling with sutable hangers, clamps,supports, as required and painting with two or more coats of synthetic enamel paint of required shade complete as directed by Engineer-in-Charge. 150mm dia

Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 1239/3589 i/c fittings like elbows, tees, anges, reducer, jointing with nuts bolts, gaskets and welding etc.and fixing the pipe on wall/ ceiling with sutable hangers, clamps,supports, as required and painting with two or more coats of synthetic enamel paint of required shade complete as directed by Engineer-in-Charge. 100mm dia

Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 1239/3589 i/c fittings like elbows, tees, anges, reducer, jointing with nuts bolts, gaskets and welding etc.and fixing the pipe on wall/ ceiling with sutable hangers, clamps,supports, as required and painting with two or more coats of synthetic enamel paint of required shade complete as directed by Engineer-in-Charge. 800mm dia

Providing and fixing single headed hydrant valve with instaneous female Gun metal couplings of required dia with cast iron wheel lSI marked conforming to IS 5290 (Type ‐A) with blank gun metal cap and chain, adopter as required complete as directed by Engineer‐in‐ Charge.63 mm dia

PROVIDING FIXING INCLUDING TESTING AND COMMISSIONING THE FOLLOWING SIZE OF FLANGED TYPE SLUICE VALVES OF CAST IRON BODY AND Bronze/Gunmetal seat COFIMING TO CLASS PN 1.6 OF IS 14846/ IS 780 COMPLETE WITH BOLTS AND NUT RUBBER INSERTION ETC. AS PER SPECIFICATION COMPLETE AS REQUIRED 150MM DIA

Providing, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required. 150 MM DIA

Providing, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required. 100mm dia

Providing, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required. 80MM DIA

Providing, installation, testing and commissioning of dual plate non- return valve of following sizes confirming to IS 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 150mm dia

Providing, installation, testing and commissioning of dual plate non- return valve of following sizes confirming to IS 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 100mm dia

Providing, installation, testing and commissioning of gun metal valves of following sizes as required.25 mm dia.

Supplying and fixing following dia, 15 mtr long RRL hose pipe with following dia male and female gun metal couplings duly binded with GI wire, rivets etc. confirming to IS 636 (type-A) as required. 63mm dia

Aid hose reel with MS construction spray painted in post office red, confirming to IS 884 with upto date amendments, complete with the following as required. (a) 30/36m long, 20 mm (nominal internal dia) water hose thermoplastic (textile reinfirced ) type -2 as per IS 12585 (b) 20mm (nominal internal) dia gun metal globe valve and nozzle. (c) Drum and brakets for fixing the equipments on wall. (d) Connections from riser with 40 mm dia stop valve (gun metal) and M.S. pipe.

Supplying and fixing hose cabinet of size 900mmx600mmx500mm made of 2 mm thick MS sheet with 4 mm thick float glass doors in front painted "FIRE" in red paint i/c necessary locking arrangement suitable to accommodate external hydrant with butterfly valve 2 nos. 15mtr. Long hose pipe, 1 no branch pipe mounted on wall or raised brick platform and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respects for external hydrant, as directed by Engineer-In-Charge.

Supplying and fixing 63mm gun metal branch pipe with 20 mm (nominal internal diameter) size gun metal nozzle conforming to IS 903, suitable for instaneous connection to interconnect hose pipe coupling as required.

Supplying and fixing 4 way fire brigade connection of cast iron body with 4 nos. gun metal male instantaneous inlet couplings complete with cap and chain as required. For 150mm dia MS pipe connection, confirming to IS 904 as required.

Supplying and fixing air vessel made of 250 mm dia, 8mm thick MS sheet, 1200 mm. in height with air release valve on top and flanged connection to riser, drain arrangement with 25mm dia gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shape as required.

Providing fixing testing and commissioning of cast iron body and brass/bronze working parts comprisisng of water motor alarm, bronze seat clapper arm, hydrulicaly driven mechanical gong bell to sound continous alarm when the Wet riser/Sprinkler system activates, pressure gauges, emergency release, stainer, pressure switch, cock valves and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc. of size 150mm dia and obtaining NOC from local bodies etc required.

Providing and fixing pressure transducer (dial type pressure guage with isolation cock) in MS pipe line (dial diametre 100mm pressure range 0-10 kg/cm) suitable for 12 volts /24 DC. Including connection etc. as required.

Providing and fixing of carbon-di-oxide type fire extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket confimimg to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. Capacity 4.5 Kg.

Supplying, installation, testing & commissioning of approved make jockey pump horizontally mounted coupled motor (Eff-2) 5.5hp, 2900 RPM, 3 Ph 415 V with mechanical seal pump, delivery of 180 liters per minute against total head of 70/88 meter so as to ensure a minimum pressure of 3.5 Kg/Cm2 at the highest. The impeller shall be closed type and accurately balanced dynamically. The pump shall be of cast iron , impeller shall be of bronze and shaft shall be of stainless steel. i/c coupling, coupling Guard, base channel foundation & Matching Flanges etc. as required as per specifications. Kirloskar / Shakti or Equivalent

Supplying, installation, testing & commissioning of approved make Horizontally mounted coupled motor (Eff-1) 60hp, 2900 RPM, 3 Ph 415 V with mechanical seal pump delivery of 2280 liters per minute against total head of 70 meter so as to ensure a minimum pressure of 3.5 Kg/Cm2 at the highest. The impeller shall be closed type and accurately balanced dynamically. The pump shall be of cast iron , impeller shall be of bronze and shaft shall be of stainless steel, automatic air release valve, pressure gauges ( combination suction gauge, 3½" dail type with ¼" cock and lever handle - 1no., discharge gauge, 3½" dail type with ¼" cock and lever handle - 1no.) i/c coupling, coupling Guard, base channel foundation & Matching Flanges etc. as required as per specifications. The fire pump set as per NFPA - 20 specifications. Kirloskar / Shakti or Equivalent

Supplying & Installation of approved make Diesel Engine driven fire fighting pump water cooled 65 BHP 2150 RPM engine, fuel tank 200 Ltr capacity (empty), accessories, matching flanges, base frame, ARV, fuel gauge, exide 12 Volt battery and charger, lugs & cable between battery and charger. The pump capacity of 2250 litres per minute at total head 70 meters, automatic air release vave, pressure gauges (combination suction gauge, 3½" dail type with ¼" cock and lever handle - 1no., discharge gauge, 3½" dail type with ¼" cock and lever handle - 1no.) as required. All above equipment's are mounted on common base plate. The fire pump set as per NFPA –20 specifications. Kirloskar or Equivalent

Laying of one number armoured / unarmoured cable 1.1kV grade of size exceeding 25 Sq.mm but not exceeding 120 Sq.mm on wall/truss with approved type of iron clamps etc. as required.

Laying of one number armoured / unarmoured power cable 1.1kV grade of size exceeding 25Sq.mm but not exceeding 400 Sq.mm in the existing masonary open duct as required.

Laying of one number armoured / unarmoured power cable 1.1.kV grade of size exceeding 25Sq.mm but not exceeding 120 Sq.mm direct in ground including excavation in all soil / murrum / soft rock, sand cushioing, protective covering and refilling the pit etc. as required.

Supply of XLPE Insulated power cable (confirming IS-7098 Part-I ) 1100 Volt grade, 1 core /2 core /3½ core/4 core ISI MARKED with Alu. Stranded /solid conductor. 3½ CORE ARMOURED 95 Sq.mm

Providing and fixing of ABC Powder type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket confimimg to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. Capacity 6 Kg.

Bidder Name

Amount

BARUN BUILDERS AND CONSULRANT(GSTN-23AXMPK8856F1Z4)