Remodelling of LIS Sahla Mundi in tehsil Bhattiyat Distt Chamba HP

Amount

Supply, Installation, Testing and Commissioning of 15HP VFD (make: Schneider/ Selec/ Delta/ ABB/ L&T) for operating 1 or More Motor Pump upto the VFD Capacity. It Integrates with the Controller units to bring energy efficiency and optimize the system. It helps to precisely adjust the speed of water pumps based on pressure and specific requirements, resulting in significant reductions in electricity consumption and enhanced pump longevity.

Supply, Installation, Testing & Commissioning of Pressure sensor for water 9 to 24V DC supply operated liquid pressure sensor Standard Type, Output : 4-20mA, Accuracy : 0.5% FS, Range : 0 to 25 Bar complete, including suitable connectors/ DC power supply module/ welding/ drilling/ threading as required at site but excluding the wiring, power supply to location and excavation or any other civil work

Providing, programming and installation of 24VDC operated 7 inch HMI with resistive touch screen having resolution 800 X 480 pixles, COM1 (RS485), Ethernet Port, USB Port, 128MB flash memory, 256MB DRAM, inbuilt data logging, ingress protection (IP65). Programming will include making graphical user interface for changing settings and displays the userful parameters in graphical/ numerical form as per site/ client's requirement including making all accessories connections with PLC/ controller/ Sensors etc. complete

Supply and installation of MS Panel box made up of 18SWG MS Sheet duly powder coated including 2vertical legs of 600mm length each made up of MS angle of 40mmX40mmX5mm including excavation of pit of size: 450mmX200mmX300mm and fixing panel box with cement concerete 1:2:4 (Cement:Coarse Sand: Stone aggregate 20mm nominal size). The panelwill consist 1Nos 4Pole 10Amp MCB, 1Nos Power Indicator,2Nos Horizontal DIN rail for fixing MCB etc. and a necessaryholes at bottom for cable inlets/ outlets etc. and it will havesuitable locking arrangement. Enclosure size: 300mmX200mmX450mm

Automatic Controller Unit ( Model : MATRIX DUAL) : Supplying automatic water level controller unit with water level indicator by 7-segment LED display (56mm height) to indicate water level of single/ multiple tanks (maximum 6 tanks) in percentage with 1.00 % resolution. It will receive wirelessly the water level & other data and operate motor according to set configuration. It will Operate the Two motors on the alternative basis. It will also indicate "Flow status" and audio/ visual alarm for Full/Low/ Overflow condition. It will also indicate "Flow status" and audio/ visual alarm for Full/Low/ Overflow condition. It will automaticly operate the motor to maintain the water level between low and full level.( Only controller/ display unit without transmitters. Water level data Transmitters unit will be charged separately) [Size in mm: 426(H) x225(W)x95(D)]

Digital Top Transmitter with 15ft Sensor Length: Supplying battery powered water level data transmitter with water level sensors to measure water level with 1% resolution and flow/overflow status and transmit the data wirelessly to controllercum receiver unit.

Wireless Data Repeater: Supplying and installation of Data Repeater for retransimitting the data signal of transmitters/ other repeters to further distance

Supply and installation of GSM module, a communication interface gateway to communicate the data between web server and controller / level transmitters. UART protocol is used for communication between GSM and controller/ Repeater.The GSM unit will be equipped with SIM of cellular network provider for communication with server

Providing web based remote Controller/ Water level monitoring system by providing access to control/ information panel at Central server of minimum Tier-III level data centre in India. It will trigger SMS alerts for various events on crossing limits. The cost include only for access to server/ application and it does not include the cost of required hardware.The cost of hardware will be charged seperately but the cost of running the services is included. For access to Motor controller/ Valve Controller to operate - For 12 months

Excavation in earth work and disposal of all excavated earth such as pick work, jumper work, blasting work in hard/ soft rocks, including dewatering in saturated soil upto all leads and lifts disposed earth to be levelled and neately dressed within all leads and lifts as per the direction of Engineer-in -Charge.

Wire crates of G.I. wire filled with boulders with square cut faces against the wire. (Wire crates to be measured and paid for separately) within all leads and lifts as per the Direction of Engineer-in-Charge.

Wire crates made of G.I. wire filled with boulders with square cut faces against the wire (Boulder filling to be measured and paid for separetaly) G.I. wire 5mm thick corresponding to SWG-6 15cm.x15cm. mesh.The size of crates 1.25×1.25×1.25 m with in all leads and lifts as per Direction of Engineer-in-Charge..

Providing and laying cement concrete 1:3:6 mix (one cement :Three sand :six stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in Retaining wall as per direction of Engineer- in-Charge with in all lead & lifts.

Providing form work with steel plates 3.15milimetres thick welded with angle iron in frame 30x30x5mm So as give a fair finish including centring shuttering , strutting and propping etc. with wooden battans & ballies, height of propping & centring below supporting floor to celing not exceeding 4.00 metres & removal of the same for in situ reinforced concrete & plain concrete work in Vertical surface such as wall (any thickness) partitions walls & the like including the attached pillaster,s buttresses plinth string courses & the like as per the direction of the engineer-in-charge with in all lead & lifts.

Providing and laying cement concrete 1:2:4 (1: cement:2 sand :4 graded stone sggregate 20 mm nominal size) and curing complete excluding cost of form work in foundation and plinth with in all leads and lifts.

Manufacturing & Fixing of Fencing Pannel of size 1.80 x 1.20 metres of Jali 25 x 25 mm welded to MS Black Tube 32 mm Dia Dia of 14 guage with MS Flat Cover 20 x 3 mm , MS Hold Fast 7 No made out of MS Flat 32 x 5MM including cutting, welding, painting two coat of red oxide paint complete in all respect

2nd class brick masonry in square or rectangular pillar in cement mortor 1:4 (One cement: Six sand ) as per direction and to the entire satisfaction of Engineer- in-Charge with in all leads and lifts.

Steel work welded in built-up section,trusses and framed work including cutting housting, fixing in position and applying a primering coat of red lead paint in beams joists channels, steel gate, angle cleets as in main and cross beam, hip and jack rafters, purlins connected to common rafters, and like.

Providing and fixing M.S. pressed but hings with necessary screw.1215x65x2.12mm within all leads and lifts as per the direction of Engineer-in -Charge.

providing and fixing oxdized M.S. sliding door bolts with nuts and screws etc. complete (300x16mm) within all leads and lifts as per the direction of Engineer-in -Charge within all leads and lifts as per the direction of Engineer-in -Charge.

Providing and laying Precast interlocking pavers 25 mm thick in floors on a bed of 25 mm thickness of cement mortar 1:6 jointed with eat cement slurryt grey in shade within all leads and lifts as per the direction of Engineer -in- Charge.

20 mm thick cement plaster in single coat on rough side of brick stone masonry for interior plastering upto floor two level including arrises internal rounded angle chamfers and or rounded angle not exceeding 80 mm in girth and finished even and smooth in CM 1:3 ( 1 cement 3 sand) involving all leads and lifts as per Direction of Engineer-in Charge.

Robin Mahajan (BID ID -500487)

TECHPRO ENGINEERING COMPANY (BID ID -500719)