Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹26.1 LAccepted-AOC | L-1 | Accepted-AOC Being Lowest and reasonable | |
| 2 | L-2₹31.5 L+₹5.1 L (19.2%)Rejected-Finance C O GUPTA EMPORIUM AR BAZAR HAPPY VALLEY SHILLONG 793 004 | EAST KHASI HILLS | MEGHALAYA | 793004 | L-2 | Rejected-Finance Other than Lowest | |
| 3 | L-3₹33.0 L+₹6.6 L (24.9%)Rejected-Finance | L-3 | Rejected-Finance Other than Lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
13 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Umroi
Military Engineer Services Garrison Engineer Umroi Umroi Military Station PO - Barapani, Shillong-793 103
REPAIR AND REPLACEMENT TO JOINERIES IN CERTAIN MARRIED ACCN AT UMROI MIL STN UNDER GE UMROI
2023_MES_580612_1
8652/E8
Open Tender
Civil Works
Item Rate
180 days
Umroi
As per NIT
8 documents required · 8 mandatory
₹500
GE Umroi
₹60,000
20 Mar 2023
13 Feb 2023
14 Mar 2023
13 Feb 2023
13 Mar 2023
27 Feb 2023
Amount
Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n.exc.4 Sqm each
-Ditto- as per item No 1 above but area n.exc. 1.5 Sqm each
M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, complete all as specified and directed.
M&L Pre-cast cement concrete Type C1,1:3:6 (20mm gradded aggregate) block masonary with solid blocks, exc. 10cm in width and setting in mortar (1:6), complete all as specified and directed.
M&L for newly plastered surfaces on wall surface and apply two coat of oil Bond distemper with alkali resistant primer over 3 mm thick wall care putty, complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons, walls etc, laid , bedded and pointed in any mortar, complete all as specified and directed.
M&L for 25mm thick PCC type B-0, 1:2:4 (12.5mm graded aggregate) as in leveling course, complete all as specified and directed.
M&L for joint free non-skid white ceramic tiles 7 to 8 mm thick, area of each tile exc. 0.18 sqm but n exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.
M&L for joint free non-skid white ceramic tiles 7 to 8 mm thick, area of each tile exc. 0.18 sqm but n exc 0.38 sqm, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.
M&L for joint free non-skid white ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or Coloured cement to match, complete all as specified and directed.
Supply & Fixing of glazed ceramic coloured /printed tiles 350x250x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match on verticle surface of wall, complete all as specified and directed.
M&L for 15mm thick screed bed or bedding laying of cement mortar (1:4) for as in floor finishes, complete all as specified and directed.
M&L 10 mm thick backing coat of cement mortar 1:4 for as in vertical surfaces such as skirting , dados etc, complete all as specified and directed.
S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters (sliding type), aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, complete all as specified and directed.
S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified and directed.
S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frames for door, windows, ventilators, partitions etc. with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.
M&L for 12mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination, fixed with screws to aluminium frame work, complete all as specified and directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples, complete all as specified and directed.
M&L for aluminium anodized grill of Design No DG 104 pattern made out of 10mm dia rod fixed with and including standard aluminium frame of F section of size 23.40 mmx15.30 mmx1.40 mm thick etc. complete all as per manufacturer's instructions (minimum 3.50 kg/Sqm without Frame), complete all as specified and directed.
S&F in repair of floor door stopper 150mm long of alluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.
S&F in repair of brass Mortice lock, 4 levers, vertical type, size 100mm, complete all as specified and directed.
S&F in repair of Aluminium extruded section door closer hydraulicaly regulated designation No. 3 Universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg, complete all as specified and directed.
Schedule of Credit
M/S UTTAM SAHA
MOINUL HOQUE CHOUDHURY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .