8355 SPECIAL REPAIR TO BLDG NO SR38 AND SR39 OF ARTY DIVISION SIGNAL REGT UNDER GE (CENTRAL) PUNE

Amount

Taking down chowkats or frames with shutters (Without taking off shutter from the frame) area not exc 1.50 Sqm each and making good disturbed portion of wall with PCC 1:2:4 of using 20mm graded aggregate complete all as specified and as directed.

Taking down chowkats or frames with shutters (Without taking off shutter from the frame) area exc 1.50 Sqm but not exc 4 Sqm each complete all as specified and as directed.

S & F pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified.

M & L for Cement concrete 1:3:6 type C1 (using 20mm graded stone aggregates) for filling of pressed steel door frame and hold fast block cutting etc complete

S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, one face is covered with decorative face veneer with lipping/frame to match complete as directed

Supply and fixing factory Made 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (Without sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified.

S & F powder coated aluminium window shutters in three track sliding (whichever the case may be ordered to sliding horizontally or vertically) with two or more shutters with sliding arrangement with two or more shutter rubber beading and glazing clips using aluminium sections weighing not less than 0.55 Kg/Mtr etc with including 4.8 mm thick selcted quality glass for glazing and stainless steel wire cloth 0.71 mm dia with width of aperture 1.18 mm complete with including of necessary hardware i.e. locking mechanism, handle , including necessary gasket / neoprene / rubber packing / beading etc all as specified and directed

S & F 150mm extruded aluminium alloy powder coated handles fabricated type all as specified and directed.

S & F Aluminium anodised powder coated barrel tower bolt of extruded section 150mm long all as specified and directed.

S & F butt hinges 100mm, medium weight, cold rolled, mild steel complete all as specified and directed.

S & F for 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F in repair aluminium powder coated curtain rails 25mm dia with rings @ 10cm c/c etc complete all as specified.

S & F in repair aluminium powder coated brakcet, knobs,complete all as specified.

Supply and fixing in repair 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified and directed.

Supply and fixing stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm all as specified.

M & L preparation of old surfaces of steel of any description over 10cm width or girth not otherwise described and applying one coats of synthetic enamel paint all as specified and directed.

M & L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removing rubbish off the premises complete all as directed

M & L for 40mm thick cement concrete type B-0 1:2:4 using 12.5mm graded aggregate levelling course complete all as specified.

Material and labour for Non skid coloured ceramic tiles of size 600mm x 600mm x 10mm thick (Square / rectangular) over & including 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.

M & L for coloured glazed ceramic tiles of size 450 x 300 x 7 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat of CM 1:4 complete all as specified.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid with any mortar etc and removing rubbish off the premises complete all as directed.

M & L 20mm thick granite (of any type) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms, floor / skirting / risers or as in vertical support or counter top for wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 with edges polished / rounded as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface complete all as specified and as directed.

Dismantling of AC sheet corrugated, or semi corrugated in roof covering complete.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of required colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of required colour having tensile strength of 550 Mpa as in ridge valley, gutters, bridge board, roof covering / cladding to wall, bent to shape as required and directed fixed with self tapping screws all as specified and directed.

Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered) cement plaster and removing rubbish off the premises complete .

M & L for rendering 15mm thick in cement mortar 1:6 on brick / concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M & L for rendering 20mm thick in CM (1:4) on brick or stone wall surface finished with sponge finish complete all as specified and directed

M & L preparation of newly plastered surfaces of walls of any description and applying two coats of oil bound distemper over one coat primer by mechanical means over 2mm thick wall care putty complete all specified and directed.

M & L for complete removal of existing treatment on walls (any number of layers ) by scrapping with manual / mechanical means and applying two coats of oil bound distemper over one coat primer over and including 2mm thick wall care putty complete all specified and directed.

Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint all as directed and specified.

M & L for preparation of old plastered or unplastered surfaces of wall by brooming , wire brushing , removing of loose scales / dusts / unwanted particles by manually / mechaincal and applying one coat of cement based paint complete all as directed and specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as directed.

S & F powder coated aluminium snap grid framed work of size 600mm x 600mm for false ceiling and including suspended hangers 6mm dia G.I (upto 1200mm long) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40 x 3mm of size 60mm long and expansion hold fastener 12.5mm dia 40mm long with including 9mm thick one side prelaminated Gypsum ceiling board of as approved including applying tree coats of white wash complete with following aluminium powder coated sections :- (a) Main and cross Tee shall be of size 36.5mm x 23.5mm x 1.5mm thick and 23.5mm x 23.5mm x 1.28mm thick respectively and jointed at junction/crossing with aluminium anodised angle bracket of size 15mm x 15mm x 1.5mm thick weighing 0.12 Kg/RM fixed with suitable M.S bolt, Nuts & washers as per manufaturere's insructions . (b) The snap grid (Main / Cross Tee) section shall be suported at the end along the wall with aluminium anodised angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg/RM. (c) PVC protcted sheeting shall be used to avoid scraches, damages to frame work while fixing to ceiling.

M & L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6 compete all as specified and directed

M & L for PCC type B1 1:2:4 (using 20mm graded stone aggregates) as in lintels upto 1.5 Mtr clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating all as specified and as directed complete.

M & L for ready made 9 feet pulley operated cloth drying system, aluminium anodised 22 mm outer dia pipe, channel assembly, locking ststem to hide rope knot, ropes 4 mm dia HDPE double core and fitting materials etc complete all as specified and directed Make : Easy dry or other equivalent make as approved by GE

M & L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 Fe-410W, quality A including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as directed.

M&L for preparation of new untreated steel or iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. all as directed.

Taking down Main switches/DBs of any make and type including teakwood board, MCBs/MCCBs etc. complete and making good the disturbed surfaces including colour wash complete all as specified.

Taking down ceiling fan / Exhaust fan / Wall fan of any sweep, keeping with safe custody and refixing the same with replacement of unserviceable 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal over hauling / servicing the fan complete including fan hook/clamps/nuts/bolts/washers etc and Painting of ceiling fans with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified.

M & L for Point wiring using colour coding as per IS with 1.5 Sqmm multistranded copper conductor single core FRLS PVC insulated unsheathed 1100 Volts grade , ISI-694 marked drawn through duly casing caping on wall / roof / floor along with suitable feetings, with modular PVC surface boxes of suitable size including modular cover plate / frame for housing modular switches / sockets ISI marked along with 1.5 Sqmm copper conductor FRLS, PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for the following : -

(a) One light point controlled by one, one way switch

(b) One fan point controlled by one, one way switch

(c) One three pin 5 Amps socket outlet point controlled by one No , one way switch on same board

(d) One three pin 5 Amps socket outlet point controlled by one No , one way switch on independent board

All as per Item No. 44 above but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amps socket outlet, independent board, including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly complete all as specified.

S & F Modular Switch, single pole, one way 6 Amp one module all as specified.

S & F Modular Switch, single pole, one way 16 Amp one module all as specified.

S & F Modular sockets, 6 Amp 2/3 pin combined two module all as specified.

S & F Modular sockets, 6/16 Amp 2/3 pin combined two module all as specified.

S & F ceiling rose surface type three terminals complete all as specified.

S & F Modular type stepped electronic fan regulator 1 to 5 steps all as specified & directed

Supply and fix in replacement LED Tube light fittings Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver 10 Wat LED complete including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector complete all as specified and directed

Supply and fix in replacement LED Tube light fittings Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver 20 Watt LED complete including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector complete all as specified and directed

S & F in replacement LED security light of luminaries 24 watt complete with all accessories and wall mounting bracket of suitable size including clamps, nut bolts etc. prewired complete all as specified and directed.

M & L for Sub main wiring with 2 runs of single core 4 Sqmm PVC insulated unsheathed multistranded 1100 Volts grade with copper conductor drawn through non-metallic 20 mm PVC rigid, ISI marked and its accessories duly in casing caping on wall/ roof including one run of single core 4 Sqmm PVC insulated unsheathed multistranded 1100 Volts grade with copper conductor cable as earth continuity conductor complete including including taking down old submain wiring all as specified. Note :- Two run of 4 sqmm conductor & one run of 4 sqmm conductor will be measured as on RM

S & F MCB SPN DB 4 way double door with 200 Amps rated busbar 230 Volts, all as specified.

S & F for MCB four pole of rated capacity 63 Amps, 415 volts breaking capacity 10 KA, C-curve complete all as specified.

S & F for MCB DB, SPN, sheet metal enclosure, 8 way with 200 Amps rated bus bar double door, fixed on wall good to disturbed surfaces, and connecting with existing cable complete all as specified and directed.

S & F for MCB double pole of rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, C-curve complete all as specified and as directed.

S & F MCB Single Pole rated capacity 6 to 32 Amps, 240 Volt breaking capacity 10 KA ,C- curve complete all as specified and as directed.

M & L in replacement for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 Mtr deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 Mtr below ground level connected to and incl GI wire 4 mm dia and GI pipe 20 mm dia light grade for protection to the extent of 7.5 Mtr as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete (Note:-GI earth strip and protection pipe beyond 7.5m will be measured and paid separately)

Gauri Associates

ANIL CONSTRUCTION CO.

J P ASSOCIATES

M/S S H KHAN ENTERPRISES

L.T Associate

Sai Construction

M/S NAVNEET S MORDE