CONSTRUCTION OF OVER HEAD TANK AT ALLANJI TNUHDB (180) HOUSING UNIT IN KETTI TOWN PANCHAYAT

Earth work excavation for Open Cutting in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring and strutting and balling out water wherever necessary refilling the sides of foundation with excavated earth in layers of not more than 15cm thick well rammed and consolidated depositing the surplus earth within the compound with an initial lead of 10cm and lift of 2m in places shown by the departmental officers clearing and levelling the site etc., complete complying with standard specification

Earth work excavation for Foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring and strutting and balling out water wherever necessary refilling the sides of foundation with excavated earth in layers of not more than 15cm thick well rammed and consolidated depositing the surplus earth within the compound with an initial lead of 10cm and lift of 2m in places shown by the departmental officers clearing and levelling the site etc., complete complying with standard specification

Supplying and filling in foundation and basement with filling sand in layers of not more than 15 cm thick well rammed consolidated etc. complete complying with standard specification and as directed.

Plain Cement concrete 1:4:8 (one cement five sand and ten Coarse aggregate) using 40mm hard broken granite Metal for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick well rammed and consolidated complying with standard specification.

Reinforced cement concrete 1:1 1/2 :3 mix (one cement One and half sand and three Coarse aggregate) using 20mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc., to complete as per std., specification.

Supplying and eracting centering for sides and soffits including supports and strutting upto 3.00 m height for plane surface such as RCC Slab, Rectangular Beams, Tee (or) ELL Beams, Lintel Bed Block, Slbs, Landing Slabs, Beams Canopy, Side Slab (or) Square (or) Round columns etc., as detailed below with all cross branchings using M.S. Sheets of size 80cm x 60cm and B.G. 10 stiffended with welded M.S. Angles of size 25 x 25 x 3mm for boarding laid over silver oak or country wood joints of 10cm to 30cm to dia spaced at 75cm c/c etc., complete complying with standard specifications as directed by departmental officers etc., complete.

40mm dia pipes

40mm dia pipes

32mm dia pipes

Supplying fabricating and placing in position of HSD steel rods for reinforcement including the cost of steel and building wire etc., complete and as directed by departmental Officers.

Plastering in cement mortar 1:3 mix 12mm thick using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting for plastering for plastering and protecting from other damages till setting of mortar etc.complete complying with standard specification

Special Ceiling Plastering in cement mortar 1:3 mix 10mm thick using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting for plastering for plastering and protecting from other damages till setting of mortar etc.complete complying with standard specification-

Painting the new walls two coats over one coat of priming with best Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers etc., complete complying with standard specifications.

Fabrication, supply, delivery and fixing of outside MS ladder of 45cm wide made out of 50x50x60mm MS angle for sides and steps in 16mm MS plain rods fixed at 30cm centre to centre welded, jointed etc., providing with suitable side supports, clamps and locking arrangements provided with one coat of red oxide paint for providing access to roof top 30,000 Lit capacity OHT of suitable inclined length including bottom anchorage and transportation and as directed by departmental Officers.

Fabrication, supply, delivery and fixing of outside MS ladder of 45cm wide made out of 50x50x60mm MS angle for sides and steps in 16mm MS plain rods fixed at 30cm centre to centre welded, jointed etc., providing with suitable side supports, clamps and locking arrangements provided with one coat of red oxide paint for providing access to roof top 30,000 Lit capacity OHT of suitable inclined length including bottom anchorage and transportation and as directed by departmental Officers.

Providing manhole cover of size 0.60x0.60m in Reinforcement concrete 1:11/2:3 (One cement one and half and three metal) with suitable reinforcement 50x50x6mm MS angles fixed along-edges as directed by departmental officers.

Supply and delivery of 3" dia GI Pipe including cost and conveyance of all labour charges etc., complete

STAR CONTRACTORS (BID ID -1081010)