Supply of the GLF Spares at Khajuraho Airport

Amount

Supply of following rating Halogen lamps suitable for Airfield lighting system with all accessories etc complete as required.

200 Watt, 6.6 Amp., bi-pin Halogen lamp, suitable for elevated type Runway Edge lights / Approach lights / Threshold light

45 Watt, 6.6 Amp., bi-pin Halogen lamp, suitable for elevated type Taxi light

150 Watt, 6.6 Amp., bi-pin Halogen lamp, suitable for elevated type Runway Edge light

Supply of the following Lense for Taxi Light of Colour Blue, make as below

Screw Type (AMA)

Clamp Type (Thorn)

Screw Type (ATG)

Supply of the Breakable Coupling suitable for PAPI check stick base plate of AMA make

Supply of the Bi-pin lamp holder suitable for the 200 watt halogen lamp for Airport runway light fixtures

Supply of the adjustable legs for PAPI of make AMA with complete accessories etc as required.

Supply of the 105 W pre focus halogen lamp suitable for runway inset light fixture.

Supply of the Prism suitable for ATG make(Model no.- ZA483) inset runway edge light of following colours.

Yellow

Clear

Supply of following rating completely enclosed rubber covered isolating transformers for use of 6.6A series airport lighting circuits having nominal voltage rating of 5KV. The transformer shall be water tight and shall be designed for direct burial in the earth or installation in a base. The isolating transformer shall confirm to IS specifications 12290 (latest edition) without earth connection with all accessories etc complete as required.

Isolating Transformer of 45 W, 20 A/6.6 A For Taxi way light.

Isolating Transformer of 100 W, 6.6 A/6.6 A For Sinages.

supply of the rubber gasket suitable for the runway light fitting etc as required.

supply of the rubber gasket suitable for the Taxiway light fitting etc as required.

Supply of the following colours filters of 180 degree suitable for the runway edge light. (Make-ATG )

Yellow

Supply of the 360 degree Clear Bi directional Lens suitable for Runway edge light.

Supply of the red filter suitable for the AMA make PAPI etc. as required.

Supply of the clear lense suitable for the AMA make PAPI etc. as required.

supply of the 2 pin Secoundry Lead upto the size of 3.0 Mtrs for the interconnection for the Airfield light fitting.

Supply of the refelector suitable for the AMA make PAPI etc as required.

Supply of the Threshold/End Light Fitting with all acessories etc as required.

Supply of the Esna Connector (Plug and receptical) of 16 Sq mm Size etc as required.

Supply of Nut Bolt of size of M-10 SS suitable for runway light fixture ets as required. (In a set of 6 nos.)

Supply of Thyristor suitable to used for NASU make CCR of following Rating.

Supply of Capacitor of 10 MFD, 600 VAC suitable to used in NASU CCR of following rating.

Supply of LED Sinage converter suitable to operate with inpur current of 2.8 A- 6.6 A in series circuit with output of 20 V DC etc as required.

Supply of breakable coupling suitable for Runway Edge light fixture etc as required.

electromach sales agencies

CREATIVE TRADING CO