Supply of Fabrication of Judges Awas Khasmau Khaga FTP

Supply & fixing rolling shutters of approved make made of 80x1.25mm(3”x*18 GUAGE) cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets side guides and arrangement for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs. Rolling shutter 2.90x2.55 M-3No.

Providing and fixing 27.5cm. long wire spring grade-2 for rolling shutters

Providing and fixing top cover for rolling shutters.

Supply & Fabrication of angle iron door frame chaukhat made of 35x35x5mm angle complete for opening upto 1-mt. width, with 6 Nos.hold fast (wt.not more than 1.6kg) welded to the frame and tie bar of 10mm, dia M.S. Rod, 4 Nos 5” long ISI marked hinges for S/L shutter and 6 Nos. 5” long ISI marked hings for D/L shutter fastened to frame with welding complete including one coat of red oxide paints. A- Angle Chaukhat 0.90x2.10-3 No. B- Angle Chaukhat 0.75x2.10-03 No.)

Supply and Fabrication of Z section windows made of ISI approved section (Man/Hari/Grover/ASC/NAV etc.) including all approved fittings as per design and specification complete with handles and stay, with projected type hings in outside openable & drum type inside openable window/ventilators the size of glass pan should not be more than 0.20 sqm. The T section in the window panel should be as per drawing but in should be fixed in such a way that with one coat of red oxide paints i/c M.S grill made of 10mm square bar as per design and specification including welding the same to the section window & average spacing of horizontal bars 75mm A- Z-Section window W1-1.00x0.90- 3 No.

Supply and Fabrication of Z section windows made of ISI approved section (Man/Hari/Grover/ASC/NAV etc.) including all approved fittings as per design and specification complete with handles and stay, with projected type hings in outside openable & drum type inside openable window/ventilators the size of glass pan should not be more than 0.20 sqm. The T section in the window panel should be as per drawing but in should be fixed in such a way that with one coat of red oxide paints i/c M.S grill made of 10mm square bar as per design and specification including welding the same to the section window & average spacing of horizontal bars 75mm B- Z-Section window W2- 0.60x0.45- 3 No.

Extra for oxidized M.S. Tower bolt as approved sample & its welding with M.S. plate 25x4mm in full length of window. A- 150 mm x10 mm Size ISI

Extra for oxidized M.S. Tower bolt as approved sample & its welding with M.S. plate 25x4mm in full length of window. B- 100 mm x10 mm Size ISI

MS Railing for stair case M.S. Square pipe ISI comp

Boundry wall grill ISI 35x35x5mm angle frame and 12mm square bar 10cm c/c distance with pointed bhala three No Comp.

MS Gate 4.20x2.40 m Hallow M.S. pipe ISI Design as per given by department

DIKSHA CONSTRUCTION