REPAIR MAINT TO BR WORKS IN OFFICER QTR OF DANAPUR CANTT AND CERTAIN REPAIR REPLACEMENT MAINT TO JOINERY AND SANITARY FITTING PLUMBING WORKS IN CERTAIN AREAS UNDER AGE BRII DANAPUR AT GE DANAPUR CANTT

Amount

M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying one coat of Oil Bound Distemper of any light shade complete all as specified and directed.

The same as per item No. 1.00 above but on ceiling surfaces.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including all type of tiling, marble chips , terrazo finish where ever existing etc complete all as specified and directed.

Dismantling of floor, hearth or walls tiles incl cement mirtar bedding but not backing and rubbish off permises complete all as specified and directed.

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and directed.

M&L for ATT Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors omplete all as specified and directed.

M&L for 10mm thick dark shade vitrified ceramic tiles in floors, area exceeding 0.42 sqm but n exc 1.00 Sqm over and including 15mm thick screed bed in cement mortor 1:6 set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified & directed.

M&L for 10mm thick Light shade vitrified ceramic tiles, area exceeding 0.42 sqm but n exc 1.00 Sqm as on vertical surface such as skirtings, dados etc, over and including 10 mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles omplete all as specified and directed.

M&L for non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc over and including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 for laying of floor tiles, set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and directed.

M&L 25 mm thick plain cement concrete (1:2:4), type B-0, using 12.50 mm graded stone aggregate as in floors including finishing the surface rough for laying kota stone / tiles complete all as specified and directed

M&L for glazed ceramics coloured tiles of size (450x300x 7mm)/350x250x7mm) thick on vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan to any radius built in CM 1:4 in half brick thick wall complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded stone agg) in fdn, sub base, mass concrete etc. complete all as specified and directed.

M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed.

M&L for durastone heavy duty coloured vitrified tiles 300x300x7-8 mm thick exterior grade set and jointed with neat cement slurry and painted in white cement mixed with pigments to match the shade of tile over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on wall/ceiling /roof etc including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick /concrete surfaces of wall in cm (1:6), finished even and smooth (Without using extra cement ) complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement or as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured & paid separately.

M&L Rendering 5mm thick in cement mortar 1:3 on concrete surface of ceiling and finishing the surface even and smooth complete all as specified and directed.

Supply only water proofing compound (liquid),ISI marked complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) area n. exc 1.5 Sqm each complete all as specified and directed.

All as per above item No 23 but exc 1.5 Sqm and n.exc. 4 Sqm each.

Taking down shutters of any description area exc 1.00 Sqm and n exc 2 Sqm each complete all as specified and directed.

M&L for cutting holes in brick wall built in cement mortar for inserting holdfast, walls exc half brick but n.exc one brick thick and making good dismantled portion in cement mortar 1:3 complete all as specified and directed.

S & F 30 mm thick engraved moulding flush shutters on both side solid core construction fitted to chowkats complete all as specified and directed.

S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars) divided into squares, with plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkats for door etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (b) complete all as specified & directed.

S&F steel windows with side hung shutters including hinges with MS handles and tower bolts pegstay, hold fast complete with glazing & wire gauzed bars dovetailed or welded with one shop coat of zinc chromate primer complete all as specified and directed.

S&F steel windows with side hung shutters including hinges with MS handles and tower bolts hold fast complete with out glazing bar & wire gauzed bars dovetailed or welded with one shop coat of zinc chromate primer complete all as specified.

S&F steel ventilators with top hung shutters including hinges, steel peg stay hold fast including taking down existing ventilators complete all as specified and directed.

S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165 complete all as specified and directed.

S & F in repair for powder coated aluminium door fame with shutter made out of following section complete fixed to position with hold fast all as specified & directed (a) chowkhat frame of size 83.50 x 44.45 x 1.87 mm thick weight @ 1.30Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.90 mm thick weightn @ 0.911Kg/RM (c) Top and bottom rail of size 95.25 x 44.45 x 2.00 mm thick weight @ 1.511kg/RM (d) Middle rail of size 49.91x 44.45x 2.01 mm thick weight @ 1.072Kg /RM (e) Top panel with 5.00 mm thick tinted glass fixing with rubber gasket. (f) Bottom panel with 5 to 6 mm thick Alumnium composite panel thick with clips (g) 100 mm dia round handle disc type -02 nos & Alu tower bolt 200mm - 01 No, Hinges 04 Nos each shutter. (h) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc.

S & F in repair powder coating aluminium window sliding shutter three track with following specification:- (a) chowkhat frame of size 81.25 x 38.10 x1.25 mm @ 0.781Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (c) Top and bottom rail of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (d) Partialy 0.36 mm dia stainless steel wire netting mosquito proof aperature 1.40mm with fixing arrangment. (e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum beading and rubber gasket as per requirment as in fixing for paticle board & Glass, joining cleat including locking arrangement. etc

Supply and fixing of 2nd class hardwood plain, solid, straight chwokhat and frames, wrought, framed reabted on solid,rounded or chamfered put togther with glue at joints complete all as specified and directed

S & F pressed steel frame of size 105 mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc including PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in back filling complete all as specified and directed.

S & F pressed steel frame of size 125 mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc including PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in back filling complete all as specified and directed.

S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S & F solid PVC door frame of size 75 mm x 50 mm made out of choice colour PVC with wood grain solid complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, & kitchen cupboard shutters with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face and fixed with frame at site complete all as specified and directed.

S & F 100 mm size Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long complete all as specified and directed.

S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed.

S&F 200mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 100mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed

S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S&F 100 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S & F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised With hard drawn spring, fixed in floor complete all as specified and directed.

S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified and directed.

S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames / steel frames glazed with oil putty or fixed with beads complete all as specified and directed.

S& F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed.

S& F 5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and directed.

S & F 3 mm thick figured glass pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane etc complete all as specified and directed.

S&F in repair 18/19 mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, including teak wood lipping, 6 mm thick on sides complete for cupboard shutter and incl shelves all as specified and directed.

S&F in repairs continuous (Piano) hinges 40 mm width of flaps, mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F in repair 2 lever brass cupboard lock grade-I size 65 mm etc complete all as specified and directed.

S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F 100 mm dia extruded brass handle, fabricated type polished fixed to board complete all as specified and directed.

S&F toughened glass 8 mm thick as in hinged door, partitions, automatic doors, windows shutters, fixed windows and similar work including cutting to shape, drilling holes required complete all as specified and directed.

S&F in repair stainless steel designer curtain rod fancy type curtain rod 20 mm dia including brackets as approved complete all as specified and directed.

Easing of steel/wooden window of glazed & gauzed shutters including small fittings oiling, greasing and welding if required and make it functional complete all as specified and directed.

Easing of wooden door shutter (Panelled or skelton) and make it functional complete all as specified and directed.

Easing of Aluminium windows of glazed & gauzed shutters including small fittings oiling, greasing and welding if required and make it functional complete all as specified and directed.

Easing of Aluminium shutter and make it functional complete all as specified and directed.

Taking up or down steel tubing and connections 15 mm dia complete all as specified and directed.

Taking up or down steel tubing and connections, of 20 mm dia complete all as specified and directed.

S&F mild steel tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm dia complete all as specified and directed.

S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 20 mm dia complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 CM girth complete all as specified and directed.

S & F in repair 15 mm dia single lever Basin mixer without popup waste system including all necessary fittings as approved complete all as specified and directed.

S&F in repair 15 mm dia brass CP wall mixer"L" Bend with wall flange(Provision for overhead shower) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair vitreous china WHB size 550x400 mm white flat back including PVC waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets painted with two coats of synthetic enamel painting over a coat of red oxide primer etccomplete all as specified and directed.

S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.

S&F in repair vitreous china squatting pan, Orissa pattern of size 580 x 440 mm white, with integral foot rest, 'P' or 'S' trap including connection to trap, and to flush pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe fixed to wall , complete all as specified and directed.

S&F in repair for ABS Health Faucet with 1m Tube & Hook screwed for iron pipe comple all as specified and directed.

S&F in repairs PVC connection 15 mm dia size and 450 mm long with 2 Nos brass check nuts its washers complete all as specified and directed.

S&F in repair bib tap 15 mm bore cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe or for brass ferrule fixed to iron pipe etc complete all as specified and directed.

S&F in repair pillar tap 15 mm bore fancy type chromium plated, cast copper alloy, screwed down, high pressure, with capstan head, with or without lettered "HOT" or "COLD" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified.

S&F in repair brass CP steel tubular towel rail 20 mm dia "D" type 60 cm long between flange aluminium anodised complete all as specified and directed.

S&F in repair 15 mm bore concealed type stop valves, cast copper alloy, screwed down, high pressure, with capstan head, fancy type, chromium plated, with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified

S&F in repair stainless steel towel rack 24'' length with hook facy type complete all as specified and directed.

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.

S&F in repair two way angle cock 15 mm bore fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.

S & F in reapir chromium plated corner glass shelf with brackets complete all as specified and directed.

S&F in repair Stainless steel soap dish of size 300 x 150 mm etc fixed to wall with screw complete all as specified and directed

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410 x 330 x 160 mm complete all as specified and directed.

S&F in repair brass chromium plated overhead shower rose swivel type125 mm with CP arms 300 mm long complete all as specified and directed.

S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC complete all as specified and directed.

S & F in reapir chromium plated toilet paper holder with flap complete all as specified and directed.

S&F in replacement of cabinet mirror, box type of size 19" x 21" of colour as approved fixed to wall complete all as specified and directed.

M&L for RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregate) as in kitchen platform, shelves including necessary form work complete all as specified and directed.

Supply and fix vitreous china counter top basin of size 500x435x180 mm including waste pipe and coupling complete all as specified and directed.

Supply and fix stainless steel soap dispenser with glass bottle of standard size and shape complete all as specified and directed.

M&L for 18-20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.

S&F MS TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips complete all as specified and directed.

Taking down PVC/AC pipes upto 110mm bore(including all fittings) with spigot & socket encls & lead joints incl burning out joints complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors/ trenches complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in floors/ trenches complete all as specified and directed.

S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as specified and directed.

M & L PVC(SWR) bend of 110 mm dia of any radius etc complete all as specified and directed.

M & L PVC(SWR) Tee of 110 mm dia etc complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.

S&F in repair CP/PTMT grating with or without waste hole 100 mm size (ISI Marked) complete all as specified and directed.

Dismantling water tanks of capacity exc 250 but n exc 500 ltrs complete all as specified and directed.

Dismantling water tanks of capacity exc 500 and n exc 1000 ltrs complete all as specified and directed.

S&F 500 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed (specified in SSR Part-I).

The same as per item No. 110.00 above but 1000 Ltrs capacity.

S&F in repair 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball srewed for iron pipe and fixed (minium weight 20mm-210) gms complete all as specified and directed.

S & F in repair 20 mm bore dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat red oxide primer complete all as specified and directed.

M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and as directed.

M&L for applying two coats of oil bound distemper on wall over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and as directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete all as specified and directed.

The same as per item No 121 above but on ceiling surfaces.

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L Preparing old painted surfaces of walls, chajjas etc by washing, rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified and directed.

S & F in repair of Towel Ring Round with Round Flange fixed with Chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M&L machine pressed precast glazed colour reflective PCC interlocking paver block 60mm thick M35 grade mixed with grey cement and pigment, laid dry and bedded on sand cushion complete all as specified and as directed.

Cleaning, removing all scale, dust, dirt and elgy of 500 litre capacity tank using wire/jute brush from inside of RCC/PVC tanks and connected pipe removing to a distance of not less than 250mtrs, washing the tank/pipe with bleaching power solution and finally applying 2% potassium permangnate solution for disinfection, including marking with black paint on white base on tank "Tank cleaned on ____ Dt_____".

All as per item No above but capacity 1000 litres.

S&F rubber gasket for door sealing complete all as specified and directed.

M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 complete all as specified and directed.

M &L for preparation of newely plasterd surface and applying Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over one coat of 3.00mm putty at any height complete all as specified and directed.

Dismantling wall and ceiling board (fiber, pulp, PVC, insulation etc) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and directed.

S & F for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed.

S & F for hangers 6 mm dia GI (upto 1200mm length adjusting level) fixed to roof/slabs by means of ceiling cleats made out of GI flat 40X30 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.

M & L for 8 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

M&L for two coats of weather coat paint (apex) on old/new surfaces of wall including preparation of plastered surfaces complete all as specified and directed.

Refixing shutters of any description exc 1 Sqm but n exc 2 Sqm each and removing to or from store complete all as directed.

M&L for non skid ceramic coloured tiles (square/rectangular) of size 300x300x7-8 mm thick as in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and incl 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for 450x300x7mmmm thick glazed ceramic tiles (Digital pattern) including highlighter colored as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and incl 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F in repair 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a)

M&L PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in bed blocks for hold fasts including necessary form works.

S&F Stainles steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staple complete all as specified.

S&F in repair Stainles steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staple/ to complete all as specified.(ie MS Window and ventilator, Wooden Door and Window))

S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm.

S&F 150mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F, in repair 150mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F Aluminium handles, cast type, anodized 150 mm size comp ISI Marked

S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 250mm long.

S&F, in repair, aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 250mm long.

S & F of 150 mm size (Overall length of cover plate) floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S&F mild steel, 300 mm long ordinary helical door spring incl roller and roller plate complete

S&F 4 mm thick frosted or grouted on one side glass, ordinary quality, and glazing with oil putty in square n exc 0.50 sqm in each pane,

Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and as directed

S&F, in repair, Hardwood 2nd class boarding, 30mm thick planed both side , fixed in shelves, partions and shelves of built-in cupboards, almirah, book cases, toilet boxes, racks, pelmets and similar work complete all as specified and directed.

S&F Hasp and staple, mild steel, safety type, stove enameled black, including bolt to hinge plate and fixed with screws of 125mm size.

M&L for Brick work except bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

M&L 15mm thick cement plaster on other than fair faces of bricks work or concrete surfaces with cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for two coats of OBD on newly plaster wall surfaces incl applying with 3 mm thick Birla / JK Putty over a coat of primer of surfaces complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium (extruded section) body, designation No.2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg etc complete all as specified & directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed.e

S&F in Repair brass Mortrise lock 2 lever any type complete all as specified and directed

S&F in Repair brass cupboard lock 2 lever grade 1 size 50mm any type complete all as specified and directed

S&F in repair 150mm Extruded aluminium alloy handles, fabricated type, anodised suaitble for aluminium door size ISI Marked complete all as specified and directed.

S&F in repair bib tap 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly-nuts screwed for iron pipe & fixed complete all as specified and directed.

S&F in repair stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified and directed.

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.

Fixing only 15 mm bore galvanised steel water tubing medium grade with and including all new fittings and fixed to walls and ceilings or laid under floors, including cleaning for re-fixing of old pipe complete all as specified and directed. Note:- old pipe retrived from srl item No. 67 shall be used.

Fixing only 20 mm bore galvanised steel water tubing medium grade with and including all new fittings and fixed to walls and ceilings or laid under floors, including cleaning for re-fixing of old pipe complete all as specified and directed. Note:- old pipe retrived from srl item No.68 shall be used.

M/S NANDA CONSTRUCTION (BID ID -3383051)

PAPPU ROY CONSTRUCTION (BID ID -3382988)

RC GUPTA AND SONS (BID ID -3383504)

M/s KUMAR ENTERPRISES (BID ID -3383023)

Jai Ambay Construction (BID ID -3383820)

M/S SHEO KUMAR SINGH AND SONS (BID ID -3383298)

M/S Harsh Traders (BID ID -3383225)

M/S MODERN CONSTRUCTION (BID ID -3383236)