Design, Supply, Fabrication, Erection and Installation of Wooden Paneling, Glass Doors, Carpentry Works and other allied works at Central complex, North Site, BARC, Trombay, Mumbai.

Amount

Fabrication, supply and installation of Wooden wall paneling of height 1.1m upto window sill level including aluminium framework, 12mm Marine Ply and 3mm thick veneer, Melamine Polishing and Burma Teak wood top moulding etc as per approved shop drawings and technical specifications.

Fabrication, supply and installation of door and window near balcony with wooden panelling including aluminium framework, 12mm Marine Ply and 3mm thick veneer, Melamine Polishing and 1st class Burma Teak wood framework on the outside inlcuding Brass Antique Finish Locks & long bar handle, concealed door closer, brass hinges fixed with brass screws, door stopper etc as per approved shop drawings and technical specifications.

Fabrication, supply and installation of Glass partition with double shutter door near staircase including 8mm thick toughened glass for openable & closed shutters, 1st class BTC framework, concealed door closer, 25 x 25 wooden sections slats fixed to 12mm thick marine ply panels and Aluminium Rough ground with melamine polish, long bar handle in brass finish, brass hinges fixed with brass screws, door stopper, privacy film on glass etc as per approved shop drawings and technical specifications.

Supply and installation of Wooden frame made of 1st Class BTC moulding duly melamine polished, with 6mm thick both side laminated BWP grade marine ply around all mirrors at all locations in 7th floor etc as per approved shop drawings and technical specifications.

Fabrication, supply and installation Standing Coat Hanger made of 1st class Burma Teak with melamine polishing etc as per approved design, shop drawings and technical specifications.

Supply & Installation of Automatic Shoe Shining Machine 90W, Material Wood / 304 Stainless Steel, Color Silver, Operation Fully Automatic, Power 90W, Rotational Speed 1,400RpmVoltage AC 220 V, 50Hz, Cream Tank Capacity 200 ml, TIme Protection 15 Seconds as per direction of Engineer-In-Charge.

Supply & Installation of Stainless Steel 304 hand dryer with brush motor erial ,Power 1650W,Voltage AC220-240V , 50/60Hz, Operation Touch Free Infra-Red Activation, Auto Cut Off 30 Sec, Speed 25000 RPM Noise Level 80db(A), Heater Element Heating PTC Element, Air Speed 85-95 m/s, Drying Time 15 s, Motor Brush Motor, Blowing Volume 150 m3/h, Waterproof IPX1, Weight 12 Kg, category hand dryer machine as per direction of Engineer-In-Charge.

Fabrication, supply and installation designer Wet Umbrella holder made of powder coated MS of approved design, shop drawings and technical specifications.

Fabrication , supply and installation of Showcase for keeping Mementos/gifts made of over 19mm thick BWP Garde marine plywood, 3mm Thick Veneer Finish with Melamine polishing, 1st class BTC wood undercarriage, approved Antique brass handles, 6mm thick float glass, 12mm thick float glass shelfs etc. as per approved shop drawings and technical specifications. Size: 38" x 16"/18" x 78"

Supply and installation of approved Antique brass door handle of following typesto be fixed on existing bookshelf incliding finishing etc.as per approved design and technical specifications.

6 inches long

4 inches long

Fabrication, supply and installation of Stand alone Tea table in TC room with storage & door handle (antique brass) with top of acrylic artificial marble top- Corian sheet of 6mm thickness over 12mm thick marine plywood, with Melamine polishing inside laminate finish, 1st BTC wood undercarriage etc. as per approved shop drawings and technical specifications.Size: 43" x 18" x 38" inches

Fabrication, supply and installation of side board in TC room with storage & door handle (antique brass) with top of acrylic artificial marble top of 15 mm thickness over 12mm thick marine plywood, with Melamine polishing, inside laminate finish , 1st BTC wood undercarriage etc. as per approved shop drawings and technical specifications.Size: 76" x 18" x 38" inches.

Fabrication, supply and installation of Rack encloser in TC room with door handle (antique brass) with top of acrylic artificial marble of 15mm thickness over 18mm thick marine plywood, with Melamine polishing, inside laminate finish. as per approved shop drawings and technical specifications.Size: 43" x 25" x 38" inches.

Fabrication, supply and installation of Shutter below wash basin in all toilets of 7th Floor including 2 Nos, 3 drawer storage unit, 1 pair of openable shutters all made of BWP Marine Plywood duly laminated on both sides with handles, locking arrangement etc complete as per approved shop drawings and technical specifications. Size per set - 6' x 2'4" x 19".

Fabrication , supply and installation 18 guage brass name plates with edging and lacquer finish on one side including fixing with brass screws etc as per approved shop drawings and technical specifications.

Fabrication , supply and installation of executive work station table made of BWP grade Marine Plywood for Director in approved veneer finish with PU polished top of 30mm thick and melamine polished under carraige. The work station to have 1 nos - 3 Drawer unit on castors. The work station to have 1 no. of telephone site table of size 16" x 18" x 24" inches duly laminated on inner side, veneer & melamine polish on outer side etc as per approved shop drawings and technical specifications. Work Station Table size - 130" x 38" / 48" x 30" (ht) inches

Fabrication , supply and installation of executive work station table made of BWP grade Marine Plywood for Chairman in approved veneer finish with PU polished top of 30mm thick and melamine polished under carraige. The work station to have 1 nos - 3 Drawer unit on castors. The work station to have 1 no. of telephone site table of size 16" x 18" x 24" inches duly laminated on inner side, veneer & melamine polish on outer side with computer table of size 54 " x 24" x 30" inches as per approved shop drawings and technical specifications. Work station Table size - 130" x 38" / 48" x 30" (ht) inches.

Fabrication , supply and installation of executive Conference tables made of BWP grade Marine Plywood for Director & Chairman in approved veneer finish with PU polished top of 35mm thick and melamine polished under carraige with soild wood moulding on the edges. The conference table to have provision for 3 Nos of rack with Video Conferening Data / telephone ports as per approved shop drawings and technical specifications. . Table size - 98" inches dia with opening of 44'' inches.

Supply and installation of decorative Carpets of woven fabric of approved design of sizes 3'x4' feet.

Providing and fixing Frosted Privacy Film - 2 mil thickness of Garware make over exisiting glass partition.

Supply & Installation of matching Wooden shade Aluminium Composite Metal Panel (4mm thick) of approved make cladding make in walls along slit windows in 7th Floor lift lobby including fixing with addhesive / screwing with grids filled in with weather silicon sealant as per the drawings.The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3mm thick low density polyethelene virgin resin core + 0.5mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification.

Supply of 12 mm thick glass top with with bevelled edges of required shape and size as per instructions of Engineer-In Charge.

Designing, Supply,& Installation of Sofa set of Material & Subtype Leather -Semi Aniline Leather, Colour & Colour Family - Maroon, Seating Height 450mm, Legs Stainless Steel, Finish Matte, Size Compact, Style Contemporary, Cushion Comfort Medium, Contemporary Design• German Beech Wood Framing• Supple leather upholstery, Soft foam cushioning, Leatherette upholstery in the back and arms, Sloped armrests, Sleek Legs, as per approved shop drawings and technical specifications.

3 Seater of size - Dimension (L)1960mm X (D)880mm X (H)760mm

2 Seater of size - Dimension (L)1380mm X (D)880mm X (H)760mm

1 Seater of size - Dimension (L)840mm X (D)880mm X (H)760mm

Designing, Supply,& Installation of Sofa set of Material & Subtype Leather -Semi Aniline Leather, Colour & Colour Family - Maroon, Seating Height 450mm, Legs Stainless Steel, Finish Matte, Size Compact, Style Contemporary, Cushion Comfort Medium,Wooden frame with anti creek joinery, • Camel Brown leather upholstery with matching leatherette upholstery,Rolled arms with hammered pinhead detail, Soft fill back cushions with firm foam seat cushioning as per approved shop drawings and technical specifications

3 Seater of size - Dimension (L) 2110mm X (D) 960mm X (H) 880mm

2 Seater of size - Dimension (L) 1580mm X (D) 960mm X (H) 880mm

Designing, Supply,& Installation of Sofa set of Material & Subtype Leather -Semi Aniline Leather, Colour & Colour Family - Butter Scotch, Seating Height 610 mm, Legs - Wooden, Finish - Matte, Size Standard, Style Contemporary, Cushion Comfort - Firm, Vintage styling with a broad frame, Wooden frame with anti creek joinery, Mastro Bordeaux leather upholstery with matching leatherette upholstery all as per approved shop drawings and technical specifications

3 Seater of size - Dimension (L) 2110mm X (D) 960mm X (H) 880mm

1 Seater of size - Dimension (L) 970mm X (D) 960mm X (H) 880mm

Designing, Supply,& Installation of Coffee Table - Contemporary design, Sturdy wooden and stone construction, Luxurious Marble Table top,Wooden base, Drawer Storage, Material & Subtype - Stone - Marble, Colour & Colour Family - Grey - Light Grey, Dimension - (L)1200mm X (D)600mm X (H)480mm, Finish - Glossy, Style - Contemporary, as per approved shop drawings and technical specifications

Designing, Supply,& Installation of Coffee Table - Suave contemporary design, Wooden base frame, Large rectangular table frame, Marble tabletop, Drawer and shelf space for your papers and media, Pair with your existing leather or leatherette sofa set, Material & Subtype - Stone - Marble, Colour & Colour Family - Grey - Light Grey, Dimension(L)1200mm X (D)600mm X (H)480mm, Finish - Glossy, Style - Contemporary, as per approved shop drawings and technical specifications

Designing, Supply,& Installation of Coffee Table - Contemporary design, Sturdy wooden and stone construction, Luxurious Marble Table top,Wooden legs, Central Drawer Space, Two open storage spaces for magazines and newspapers , Colour & Colour Family - White/Brown - Cream, Dimension(L)1200mm X (D)600mm X (H)470mm, Finish - Glossy, Style - Contemporary, as per approved shop drawings and technical specifications.

Supply& Installation of Designer Decorative luxury chandalier of size upto 47 inches and height upto 40 inches of approved brand and desiqn and as per Technical Sepcifications. Material - Brass,Colour - Golden /White, Finish Type - Antique, Shade Material - Glass and Crystals with bulbs and suspender rings / rods.

Providing and fixing 12mm thk commercial ply on existing partition frame / wall / etc with necessary hardware with 1mm laminate all complete as per architect's instructions & Detail Drawings - Ply panelling finish in laminate

Providing and fixing 3 mm thick veneer, approved make and shade fixed over suitable base like cement board in wall cladding etc. The quoted rate shall include all tools & tackles, consumables, nails & screws etc, transportation, labours , all complete as directed by Engineer-in-Charge.

Providing and applying 2 to 3 coats of melamine polish of best approved make and shade to wooden/plywood surface, etc., as per manufacturers specifications including preparing surfaces and as directed by Engineer in charge etc. complete.

Providing and fixing Hanging signage- 4mm thick laser cut acrylic with photoluminescent film + UV printing and matt over lamination.Hanging using SS rods. Double sided as approved.

Providing and fixing room Numbering in Brass finish approximatye size 3" x 3". Font and text as appproved.

Providing and fixing anodized aluminium work for doors, windows, ventilators, Louvers and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) - 'Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item). - With clear float glass panes of 6.00 mm thickness

P. K. Enterprises

concept creator