Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.0 LAccepted-AOC | L1 | Accepted-AOC Lowest and reasonable | |
| 2 | L2₹28.8 L+₹36,346.50 (1.28%)Rejected-Finance | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹30.4 L+₹1.9 L (6.73%)Rejected-Finance | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹30.4 L+₹2.0 L (7.02%)Rejected-Finance | L4 | Rejected-Finance Not lowest | |
| 5 | L5₹31.9 L+₹3.4 L (12.0%)Rejected-Finance NEAR LIC OFFICE KALAIGNAR ARIVALAYAM SHOP ROOM NO7 GROUND FLOOR OF BACK SIDE PHOENIX BAY SRI VIJAYA PURAM 744101 | SRI VIJAYA PURAM | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744101 | L5 | Rejected-Finance Not lowest |
Tender Value
₹42.7 L
EMD Value
₹85,400
Closing Date
7 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PALAM
GE (AF) PALAM DELHI CANTT-10
ADDITION / ALTERATION TO CERTAIN BUILDINGS AT AF STN PALAM UNDER GE (AF) PALAM DELHI CANTT-10
2024_MES_641459_1
GENP-68/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (AF) PALAM DELHI CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) PALAM
₹85,400
Yes
25 Apr 2024
8 Feb 2024
9 Mar 2024
8 Feb 2024
7 Mar 2024
22 Feb 2024
Amount
Taking down chowkhat or frame with shutters (without taking off shutter from the frame) area n exc. 1.5 sqm each complete all as specified and as directed.
Taking down chowkhat or frame with shutters (without taking off shutter from the frame) area exc. 1.5 sqm but n exc 4 sqm each complete all as specified and as directed.
Taking down shutter of any description area exc 1 sqm but not exc 2sqm each complete all as specified and as directed.
Demolition of concrete in ground floor and paveings n.exc 15 cm thickness below or above ground level complete all as specified and as directed.
Dismantling structural steel work including door, gates but excluding framed truss etc. complete all as specified and as directed.
Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified.
M&L for 10mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceilings, surface finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6), surface finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) surface finished even and fair mixed with water proofing compound by weight as per manufacturer's instructions complete all as specified and as directed. Note:- (a) WPC shall be measured and paid separately under respective items of BOQ. (b) Necessary scaffolding up to (G+3 storey) shall be deemed to be included in unit rate.
S&F factory made PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and as directed.
Supply and fixing for factory made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC shets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC shet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.
S&F rolled mild steel grade Fe-290 Gde-E-165 quality-A as in Framed work as in doors or gates of angle or other section gates of with gusset plates, rails, cladding, chowkhats/frame or like etc welding hold fast, hinges complete all as specified and as directed.
S&F 35 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
S& F Powder coated aluminium frame for doors,windows, ventilators , partations with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.), suitable handle (1No.) complete all as specified and as directed.
S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.
S&F powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and as directed.
S&F 12 mm thick prelaminated particle, board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to aluminium frame work complete all as specified and as directed.
S&F 100 mm long Aluminium Mortice lock, 2 levers vertical type complete all as specified and as directed.
S&F aluminum anodised grill DG-102 (10mm x 5.2mm) of Decorative grill or equivalent fixed with 'F' Section size not less than (20.60x15.20)mm x 1.5mm thick of approved make complete all as specified and as directed. Note:- Minimum thickness of anodizing shall be 15 microns.
M&L for cutting holes in brick walls, built in cement mortar or cement lime mortar, exc half brick but not exc one brick thick, for inserting hold fasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B1complete all as specified and as directed.
S&F for clamps; hold fast; bands, straps, supports or stays for galvanised plain mild steel wire including bolts, rainwater, ventilating pipe and simillar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
S&F for butt hinges, stainless steel, ISI Marked 100mm size, complete all as specified and as directed.
S&F for MS butt hinges 100mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc complete all as specified and as directed.
S&F for aluminium anodized barrel tower bolts of extruded section length of bolt 150mm long complete all as specified and as directed.
S&F for extruded aluminium alloy handles, fabricated type, anodised, 125 mm size complete all as specified and as directed.
S&F for extruded aluminium alloy handles, fabricated type, 100 mm size complete all as specified and as directed.
S&F for aluminium sliding door bolt, 250 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy cincluding a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.
S & F 19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws as in cup boards, shelves and pelmet boxes etc and including dismantling boarding any description fixed with screws complete all as specified
S&F for sheet glass 4mm thick quality fixing to steel/aluminium window shutters in any position with new beads/ steel section as required for securing complete all as specified and as directed.
Supply and fixing figured glass pin head type 3mm thick glazing with oil putty in square not exc 0.50 Sqm each panes complete all as specified and as directed.
S&F for stainless steel wire cloth 0.36 mm nominal dia of eire and avedrage width of apertupre 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.
S&F in repair 20mm dia aluminium Drapery rod, coated finish including teak wood brackets & end knob as required with teak wooden curtain rings complete all as specified and as directed.
Demolition of reinforced concrete roofs, floors (other than ground floors), beams, staircases, landing,shelves chajjas and similar suspended work complete all as specified and directed.
M&L for providing reinforcement cement concrete nominal Mix using 20mm aggregate (type B-1 1:2:4) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specified and directed.
M&L for rough finished surfaces of concrete Form work to side of sides and soffits of floor or roof beams, beam, haunchings, girders, bressummers, lintels, and simillar work complete all as specified and as directed.
M&L for providing reinforcement cement concrete nominal mix as in beams, cantilevers, ressummers, lintels over 1.5m span concrete etc complete all as specified and directed.
M&L for TMT or deformed bar 10mm dia, cut to length, bent to shape required includidng cranking bending spirally for hooping for columns, hooking ends and binding with mild steel wire(annealed) not less than 0.9 mm dia.or securing with clips complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premices complete all as specified and directed.
Demolition of stone slabs and tiles laid beded and pointed in any mortar of any description or thicknes in floors , aprons etc complete all as specified and directed.
M&L for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n.exc. 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
M&L for joint free coloured glazed ceramic tiles in vertical surfaces of size (300x200)mm x 7mm thick/ (450x300)mm x 7mm thick set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 15mm thick cement rendering in cement mortar (1:4) complete all as specified and as directed.
M&L for coloured 300x600x7 to 8mm thick digital ceramic tiles on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement mortar backing coat in CM (1:4) etc, complete all as specified and directed.
M&L for joint free anti skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile exceeding 0.11sqm but n.exc. 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
M&L for joint free anti skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile exceeding 0.11sqm but n.exc. 0.18sqm, in vertical surface/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 10mm thick plaster in cement mortar (1:4) complete all as specified and as directed.
M&L for 20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed or bedding layer of morar 15 mm in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and as directed.
M&L for brick work with old size sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Material & labour for brick work with sub class B old size burnt bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:6) complete all as specifie and directed.
Supply only Integral Water Proofing compound complete all as directed.
M&L for preparing plastered or unplastered new surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying three coats of white wash complete all as specified and as directed.
M&L for preparing old surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying two coats of white wash complete all as specified and as directed.
M&L for preparing plastered or unplastered new surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion over one coat of alkali resistant primer complete all as specified and as directed.
M&L for complete removal of existing treatment of old plastered surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion over one coat of alkalic resistant primer complete all as specified and as directed.
M& L for complete removal of new surface of walls ,chajjas, soffits & beam including necessary scaffolding and applying two coats of acrylic smooth exterior paint of required shade 1.43 ltr/10sqm over a coat of exterior primer 2.20 kg/sqm (brand Apex Ultima manufactured by Asian or Brand weather coat manufactured by Berger or equivalent as approved by GE) complete all as per manufacturers instructions.
M& L for complete removal of existing surface of walls ,chajjas, soffits & beam including necessary scaffolding and applying two coats of acrylic smooth exterior paint of required shade 1.43ltr/10sqm over a coat of exterior primer 2.20kg/sqm (brand Apex Ultima manufactured by Asian or Brand weather coat manufactured by Berger or equivalent as approved by GE) complete all as per manufacturers instructions.
M&L for preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in Soft/ Loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface complete all as specified and as directed.
M&L for cement concrete (1:2:4) type B2 (using 40mm graded stone agg) as in posts and pillars complete all as specified and as directed.
S & F MS steel work in tubular trusses and tubular posts, and purlins a including special shaped washers etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 complete all as specified and as directed.
S&F for mild steel work (FE 290Grade E-165) Roof trusses (framed) , trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam. tee, angle,channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed.
S &F PPGI pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to fix the wall fixed with self taping scrows complete all as specified and as directed.
M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & including one coat of zinc chrome primer complete all as specified and as directed.
M&L for preparation of old painted surfaces of wood and wood based material of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
M&L for 75 mm thick cement concrete type C1, (1:3:6) (using 20 mm graded aggregate stone aggregates) as in plinth protections, to be finished even and smooth without using extra cement complete including use of necessary form work all as specified and directed.
Taking up or down 15mm steel tubing, bore of pipe in 15mm and connections in walls, ceilins, floors, etc including cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down 20mm steel tubing and connections in walls, ceilins, floors, etc including cleaning for refixing or removal to store complete all as specified and as directed.
M&L for GI tubing, 15mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and directed.
M&L for GI tubing, 20mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
Re-fixing old steel tubing, bore of pipe in 15mm with new fittings and connections including connections in new or old position (walls, ceiling, floors, etc) complete all as specified and as directed.
Re-fixing old steel tubing, bore of pipe in 20mm with new fittings and connections including connections in new or old position (walls, ceiling, floors, etc) complete all as specified and as directed.
Dismantling water tanks exc 500 & n exc 1000 capacity in litres and removing to store complete all as specified and as directed.
S&F for 500 ltr three layyered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and as directed.
S&F ball brass valves, 20 mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.
S&F for gun metal globe or gate valves, 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
Taking down AC, PVC pipes of 100/110mm dia of any description including all fittings complete all as specified and as directed.
Taking down CI pipes of 100/110mm dia of any description including all fittings complete all as specified and as directed.
Taking down CI pipes of 75/80mm dia of any description including all fittings complete all as specified and as directed.
Supply and Fixing 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including suitable iron clamps at one meter of interval complete all as specified and as directed.
S&F for PVC (SWR) bends of radius, suitable for 110mm dia PVC pipes fixed complete all as specified and as directed.
S&F for 75mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls with and including suitable iron clamps after every one mtr of interval with cement joints fixed to wall complete all as specified and directed.
S&F for 100mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls with cement joints fixed to wall with and including suitable iron clamps after every one mtr of interval complete all as specified and directed.
S&F for CI 100mm bends with door complete all as specified and as directed.
S&F for CI 100mm single branch piece with door complete all as specified and as directed.
S&F for CI 75mm bends with door complete all as specified and as directed.
S&F for cast iron cowls 100 mm size complete all as specified and as directed.
M&L in repairs for cast iron Nahani trap/floor trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete type B-1(1:2:4) complete all as specified and as directed.
S&F in repairs for Cast Iron `P /S Trap 100mm bore complete all as specified and as directed.
S& F in repairs, salt glazed stone ware gully traps (150x150)mm size square mouthed type ‘P’ including CI cover complete all as specified and directed.
S&F in repairs vitreous china squatting pan, 'Orissa' pattern, size (580 X 440)mm white with integral foot rests, including connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint and to socket or stopper, including flush pipe all fittings etc complete all as specified and directed.
S&F in repairs Vitreous china wash down water closet pan “Pedestal Pattern” coloured with WC seat cover white closed pattern with flat bottom and mild steel chromium plated or aluminized hinging device including PVC flush pipe and joints etc and connection to drain, flushing, pipe, anti- syphonage pipe, and fixing arrangements with fixing bolts etc complete all as specified and directed.
supply and fixing in repairs low level flushing cistern 10 ltrs capacity, and connections to pies an fixing of chain and pull, or lever, if any PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, including brackets complete all as specified and as directed.
S&F in repairs vitreous china ware Wash Hand Basin, white, flat back of size (550 x 400) mm including brackets, cutting for and pinning in ends of brackets or erecting stand including brass CP union/waste fitting of 32mm dia and discharge pipe of 32mm dia PVC of 1.0 m length etc complete all as specified and directed.
S&F Hand Shower (Health faucet) with 1.00 metre long Easy flex tube in chrome finish & wall Hook, complete all as specified and as directed. Make:- Cat No ALD-CHR-565 of JAQUAR or equivalent of make MARC or KOHLER as approved by the GE.
S&F in repairs vitreous china, counter wash hand basin oval shape size (420x420mm x135 mm) fixed on granite counter down slab including brass chromium plated full threaded waste coupling with grating 32mm dia PVC waste pipe complete all as specified and directed. Note:- Granite slab, RCC plat form, brick wall support etc shall be measured and paid separately.
S& F 5mm thick glass mirror of size (750x600)mm all edges/ border moulding complete all as specified and as directed.
S&F in repairs vitreous china urinals half stall type white or coloured with grating and union for discharge pipe etc complete all as specified and as directed.
S&F in repairs for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.
S&F in repair of sink made out of stainless steel 1mm thick, drainage board kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size (915x460)mm bowl size (410X330X160)mm complete all as specified and as directed.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
S&F in repairs bib taps cast copper alloy, fancy type, chromium plated, with crunch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed of 15mm bore size complete all as specifed and directed.
S&F in repairs pillar cock cast copper alloy, fancy type, chromium plated 15mm dia of bore complete all as specifed and as directed.
S&F in repairs stop cock fancy type, chromium plated,,concealed type, screwed down, high presure with cruntch or butterfly handle screwed both ends for iron pipe of 15mm bore pipe complete all as specifed and directed.
Supply and fixing in repairs brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
Surface dressing n.exc 15cm deep and getting out in hard and dense soil complete all as specified and as directed.
M&L for hard core of stone gauge not exc 63 mm, depositing, spreading and levelling in layers n exc 15 cm thick, watered and rolled / rammed to a true surface complete all as specified and as directed.
M&L for 75 mm thick cement concrete (1:4:8) type D2, (using 40 mm graded stone aggregate) as in sub base, surface finished even and fair complete including use and waste of necessary form work complete all as specified and as directed.
M&L for machine pressed precast concrete interlocking paver block any shape and size, with grey cement and pigment to match, confirming to IS 15658-2006 of 60mm thick M-35 grade with and including laid over 50 mm thick sand cushioning complete all as specified and as directed.
M&L for Pre polished chequered cement concrete tiles of size (30x30) cm x 25 mm thick, set, jointed and pointed with neat cement slurry with gray cement and pigment in floors with and including 20 mm thick screed bed CM (1:4) complete all as specified and as directed.
Dismantling ceiling and any type of board, any size or description, fixed in any position or in any thickness, including cover fillets with nails complete as specified and directed.
Providing & Fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum false ceiling tiles of size 595x595 mm of approved texture, design and patterns having moisture content less than 2% , humidity resistance of 99%, NRCO.50 TO 0.75 AS PER is 8225:1987, nONCOMBUSTIBLE AS PER bs 476 (PART 4) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000mm, cross-T of size 15x32 mm of length 1200 mm and secondary intermediate cross -T of size 15x32 mm of length 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2 mm, Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws complete all as specified and directed.
M&L for solid PVC Wall Lining consisting of 5mm thick supreme prelaminated colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as per specifications and directed.
M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as specified and directed.
Demolition and breaking up 150mm internal dia drain pipes (slat glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and as directed.
Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and as directed
Excavation over areas exc 1.5 m deep and getting out hard / dense soil complete all as specified and as directed.
M&L for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) in foundation, mass concrete and filiings complete all as specified and directed.
M&L100 mm thick concrete bed to drain pipes in cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and as directed.
M&L for salt-glazed stone ware drain pipes, internal dia of pipe 150mm laid in trenches and jointed complete all as specified and as directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.
Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.
Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out effective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m complete all as specified and as directed.
S&F cast iron covers and frame grade FG 150 unmachined as in manhole covers etc by making hole if required for members in each manhole, fixed with screws, nuts, bolts and washers, including locking arrangement, complete all as specified and directed.
Material and labour for Construction of Brick masonry Soak Well, 2.40m internal dia x 3.00 m deep as per TD complete all as specified and as directed.
Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified and as directed.
Taking down unservesiable sub main wiring with conduits/battens etc complete all as specified and as directed.
M & L for Point wiring with single core PVC insulated but unsheathed 1.5 Sqmm FRLSH multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings and fixing accessories including modular metal flush box with modullar plate for mounting switches, sockets, fan regulators, etc and earth wire singlle core PVC insulated but unsheathed multistrand copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLSH cable as continuous earth wire connecting to common earth dolly in concealed wiring system including making good the disturbed surface of wall complete all as spd and directed by Engr- in- Charge for the following :- (a) One light point controlled by one switch one way
(b) One Ceiling fan/exhaust fan point controlled by one switch.
(c) One socket outlet 5 Amp controlled by one switch on independent board
(d) One 3 pin 5Amps socket out let point on the same board controlled by one switch complete
All as per Srl item No 129.00 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete, all as specified and directed.
All as per Srl item No 129.00 above but one power point 6 pin 15 Amps socket out let with 4.0 Sq mm stranded copper conductor cable PVC insulated including earth wire 4 Sq mm copper conductor cable connected to earth dolly complete, all as specified and directed.
S&F of modular switch 1 way 6 Amps one module complete all as specified and directed.
Supply and fixing of modular socket 6 Amps 2/3 Pin combined 02 module complete, all as specified and directed.
S&F of modular switch one way 16 Amps, one module complete, all as specified and as directed.
S & F of socket modular type 6 amp/16 amps, 2/3 pin combined 02 Module complete all as specified and as directed.
Supply and fixing of ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete all as specified and as directed.
S&F of Indoor decorative LED battens integrated type 20 watt 4 feet white fixture with extruded aluminium body, suitable for LED tube 20 watt , bipin holder, connector block, LED rod 20 watt etc complete with all accessories internally are wired and including connecting up with twin core copper conductor cable complete all as specified and directed.
S&F of Indoor decorative LED battens- integrated type 10 watt 2 feet white fixture with extruded aluminium body, suitable for LED tube 10 watt , bipin holder, connector block, LED rod 10 watt etc complete with all accessories internally are wired and including connecting up with twin core copper conductor cable complete all as specified and directed.
Supply and fixing of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 12 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed.
Supply and fixing of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 8 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed.
Supply and Fixing Air circulator wall mounted Fan 230 Volts single phase oscilating 450 MM sweep suitable for wall mounted completed all as specified and as directed.
Supply and fixing of MCB, SPN, 40A ,10KA breaking capacity complete all as specified and as directed.
Supply and fixing of MCB, SP, 6-32A ,10KA breaking capacity complete all as specified and as directed.
S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB single pole 20 Amps complete all as spd and directed.
M&L for sub main wiring with undermentioned run of single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 V grade IS-694 drawing into and including rigid non metallic PVC conduit, medium grade ISI marked ( not less than 25 mm) with all conduit fittings & fixing accessories for concealed in wall/ ceiling or surface incl the specified run of specified size earth continuity conductor of similar type of cable complete all as spd and directed by Engr-in- Charge:- (a) 2 run of 6 sq mm and one run of 6 sq mm earth wire Note- The undermentioned runs of single core cable and specified earth continuity conductor and revelent conduit with fitting acessories will be measured as one run
(b) 2 runs of 4.0 sqmm 1 runs of 4.0 sqmm earth wire
Supply, install, commissioning and testing of commercial Air curtain unit for revention of dust and conditioned air losses, single phase, 220 V, 50HZ, made out of MS/CRCA shee tof minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS -CRC 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1 - 1.5m/sec air velocity at floor level fordoor opening size of 52" x 84" complete all as specified and as directed.
M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) with fair finish, internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR Part-I (2009) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed by Engr-in-Charge.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-Charge.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.
Taking down ceiling fans of any sweep and any size including cable connections and disconnecting of fan blades and removing the fan with blades and deposit in MES Store yard complete all as specified and as directed.
SHYAM ENTERPRISES
ETERNITY PROJECT
JAIPAL AND BROTHERS
RK TRADERS
SACHDEVA ENGINEERING WORKS
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .