SPL REPIR TO STORAGE SHEDS OF CERTAIN UNIT AT BENGDUBI MIL STN

Amount

Taking down cement plaster on brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, (Below or above ground level) and disposed of unserviceable materials, debris and rubbish to a distance not exceeding 50 m complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coveings including ridges, hips and valley gutters complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all quoins arches, pillars etc built in cement mortar and including removal from the site complete all as specified and as directed.

Taking down shutter of any description area exc 1.00 Sqm but n. exc 2 sqm each and removing from site complete etc complete all as specified and as directed.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete for Fe 410 (grade E-250 quality -B) complete all as specified and directed.

S&F mild steel rolled sections [Fe 410-W (Gde E-250) quality - B] as in roof trusses (framed), trussed, main and cross beams, hip and jack rafters, purlins, Gusset plate and base plates, where connected to common rafters and running rails, distance pieces, cleats, guides for sliding doors; fixed with angle cleats or other connecting plates, framing for cladding, staging for water tanks, nuts, bolts, washers etc,includng welding or riveting etc, complete all as specified and as directed.

M&L joist, channel, angle or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) including necessary welding, fabrication Fe-410W(GdeE-250) quality A complete all as specified and directed.

S&F Fe-410-W (Gde-E-250) quality-A plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachments etc, complete all as specified and directed.

S&F mild steel bolts 16mm dia and 260mm long made with hexagonal or square head one end and screwed the other, or screwewd both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long complete all as specified and directed.

S&F mild steel, plain, black steel sheets 1.6mm in available sizes for steel gates and similar works, cut into size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitered angles, etc, as required all as specified and as directed.

S&F pre-painted colored trapezoidal profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating, 550 MPA yield stress as per AS-1397), colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, as in roof covering, cladding to wall, fixed with and including Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals), complete all as specified and directed.

S&F pre-painted colored plain sheet profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating, 550 MPA yield stress as per AS-1397), colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer,as in roof covering, cladding to wall, ridge, valley gutter, fixed with and including Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals), complete all as specified and directed.

S&F 0.63mm galvanized, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls, etc, with grade of zinc coating 275 bent to curve including fixing with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and directed.

S&F 0.63mm thick plain, galvanized, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

M&L for Brickwork with fly ash Bricks, old size of class designation 75 (i.e of average compressive strength 75 Kgf/Cm2) straight or curved on plan exc 6m mean radius, built in Cement morter 1:6, complete all as specified and directed

M&L 15 mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

Supply only liquid water profing compound complete all as specified and directed.

M & L for 100 mm thick PCC (1:2:4) type B2 (using 40mm graded crushed stone aggregate) in base of floor, path, hardstanding etc. finished even and smooth without using extra cement etc complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C-1 ( using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & chajja and applying three coat of white washing on newly plastered surfaces of wall complete all as specified and as directed.

M&L for preparation of old plastered surfaces and applying two coat of white wash complete all as specified and as directed.

M&L for preparing newely plastered surfaces of wall and applying two coats of cement base paint, complete all as specified and as directed

M&L preparation of old decorated wall surface by washing down, rubbing down and stopping of painted surfaces and applying two coat of cement based paint on walls, complete all as specified and as directed.

M&L for preparation of old decorated steel surfaces of any description over 10cm in width or girth,not otherwise described and applying two coat of synthetic enamel paint (1st grade quality) complete all as specified and as directed.

M&L preparation of new steel & iron surfaces of any description not exceeding 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed

S&F Factory made, steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F 3.00mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square n exc 0.5 sqm in each pane complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, alongwith fittings and fixtures such as switches, ceiling roses, pendants, tube light fittings, bulk head fitting regulator, sockets main switches, DB, etc removing materials to store for keeping in safe custody or for taking credit & making good of disturb surfaces of wall/floors etc complete all as specified & directed.

M&L for point wiring one light and/or one fan point controlled by one way switch with with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 volts grade of 1.5 sqmm size through and including PVC casing & caping (double lock) of suitable size with all necessary fitting, terminated in and including pressed steel sunken boxs, readily availble (Having wall thickness not less than 1.22 mm for boxes upto a size of 200mmx300 and beyond that the wall thickness shall be not less than 1.63mm) concealed type with 3mm thick bakelite sheet coverfor mounting switches, sockets, fan regulators etc, testing on completion, complete all as specified and as directed

All as per Item No 32 above but for one 5 pin switch socket outlet, 5 Amp on independent board all as specified and as directed.

All as per item No 32 here-in-before but for one socket with other switch/switch socket outlet 5 amps on the same board, complete all as specified and as directed

All as per item No32 here-in-before but for one 15 Amp switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLSH) along with 2.50 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity earth wire, complete all as specified and as directed.

S&F switch piano flush button 5 Amp single pole one way 230 volts white finish all as specified & directed.

S&F socket outlet flush type 2 in 1,3 pin 5 Amp 230 volts white/ivory finish all as specified & directed.

S&F switch socket combination flush type multi purpose 2 in 1 , 5 Amps all as specified.

S&F switch socket combination flush type multi purpose 3 pin , 15 Amps all as specified.

S&F ceiling rose of size 65 x 50 mm surface bakelite 240 Volts three terminal complete all as specified and as directed.

S&F LED tube light luminaries with high performance LED driver 1X18 W( 4Feet long, cool day/ Warm white) all as specified and directed.

S&F building security light luminaire fitting 1x25 W LED with deep drawn housing complete with and including cable for connection from ceiling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLSH) including bracket made out of 25 mm bore GI medium grade 1.00 m long to required shape as in bracket for light fittings fixed with two pair of MS flat iron clamp of size 25mm X 3mm thickness with, 4 No. anchor bolt of required shape with nuts, and washers suitable for light including painting of mild steel flat iron surface with two coats of synthetic enamel paint over a coat of red oxide primer complete including taking down all as specified and directed.

Taking down main switches and DBs of any type and make including wooden board / junction box complete all as specified and directed.

S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with common bus bar at incoming end all as specified and directed.

S & F MCB 'C' series Single pole and nutral 6 to 32 Amps, breaking capacity 10KA, complete all as specified and directed.

S & F MCB 'C' series single pole 6 to 40 Amps, breaking capacity 10KA, complete all as specified and directed.

Material and labour for sub main wiring with 2 run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 6.00 sqmm and one single core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 6.00 sqmm as in continuous earth wire drawn into and including PVC conduit, medium grade of 25 mm bore complete with fittings, PVC Junction Boxes, fixings accessories, and making good disturbed surfaces to match with the adjoining surfaces, complete all as specified and as directed. Note:- For payment purposes, 2 runs of main cable (each of 1RM), 1 run of earth continuity cable (1RM) and one run of conduit (1RM), all together shall be considered as "1RM".

Taking down unserviceable underground cable of any size from the trenches, along floors, walls, pole etc, complete all as specified and directed (Note:- Excavation & Earth work shall be measured & paid for separately)

Supplying, laying, jointing and testing XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (Heavy duty) with stranded aluminium conductor 1100 volts grade, cross sectional area 16Sqmm 2 core, in trenches /along poles/on wall etc, complete all as specified and as directed Note For item No 49 : Excavation and earth work, sand cushioning, protection covers shall be measured and paid for separately.

Excavating in trenches n.exc. 1.50m wide and n.exc 1.50m in depth for foundation, laying of cable, pipe etc and n.exc 10Sqm on plan & not exc 1.5m in depth for manhole etc and getting out in soft/loose soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and directed

Removing excavated material to a distance not exc 50.00 mtr and depositng where directed at a level n.exc 1.5m above the stating point, complete all as specified and as directed.

Material and labour for sand cushioning for protection of underground cable consolidated and compacted with clean dry sand all as specified and as directed (Compacted thickness shall only be measured and paid)

Material and labour for well burnt Sub class 'B', old size bricks, best quality locally available laid flat, dry in trenches for cable protection, complete all as specified and as directed.

Material and labour for galvanized iron tubing 40mm bore, light grade with all fittings for protection of cable, laid in trenches/ along poles /wall/floor incl necessary clamps, bolts/nuts, complete all as specified and as directed. Note:- Excavation and earth work shall be measured and paid separately.

Materials and labour for earthing complete with galvanised earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25 metre below normal ground level with top edge of the plate not less than 1.50 metre below normal ground level connected to galvanised lead lead wire 4.0 mm dia by means of bolts, nuts and washers and check nuts of galvanised iron or steel GI earth wire protected by 15mm bore light grade galvanised iron pipe including of 20 mm dia medium grade GI water tubing sheet metal 4mm wire mash funnel, charcoal or coke and common salt in paint and testing on completion as shown on electrical plate No.5 ofm SSR Part-I. including taking out unserviceable one, complete all as specified and directed.

M/S Sohanlal Agarwala

STAR CONSTRUCTION

M/S JYOTI SHARMA AND SONS

NEO BUILDERS

HARBHAJDAS AGARWAL

CHAKRABORTY AND SONS

M/s KASHMIRA SINGH BARMI AND SONS