COMPREHENSIVE MAINTENANCE CONTRACT FOR JHANSI MIL STN UNDER GE JHANSI

Amount

SCH 'A' PART-I (B/R WORKS)

S&F in repair of extruded Aluminum anodised handles 100 mm long, fabricated type, complete all as specified and directed.

S&F in repair of extruded Aluminum anodised handles 150 mm long, fabricated type, complete all as specified and directed.

S&F in repair of MS pressed handles,oval type,stove enamelled black 150 mm long, complete all as specified and directed.

S&F in repair of Aluminium anodised barrel tower bolts 200 mm long of extruded section, complete all as specified and directed.

S&F in repair of Aluminium anodised barrel tower bolts 150 mm long of extruded section, complete all as specified and directed.

S&F in repair of Aluminium anodised barrel tower bolts 125 mm long of extruded section, complete all as specified and directed.

S&F in repair of MS barrel tower bolts,stove enamelled black,with bright bolt 200 mm long, complete all as specified and directed.

S&F in repair of MS barrel tower bolts,stove enamelled black,with bright bolt 125 mm long, complete all as specified and directed.

S&F in repair of Aluminium anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets,cast or extruded type 250mm long, plate type, complete all as specified and directed.

S&F in repair of Aluminium anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets,cast or extruded type 200mm long, plate type, complete all as specified and directed.

S&F in repair of Aluminium anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets,cast or extruded type 150mm long, plate type, complete all as specified and directed.

S&F in repair of MS sliding door bolts,plate type,stove enamelled black,with bright bolt not less than 12 mm dia with and incl a min of 06 bolts and nuts,four on bolt plate and two on plate, 250mm long, plate type, complete all as specified and directed.

S&F in repair of MS sliding door bolts,plate type,stove enamelled black,with bright bolt not less than 12 mm dia with and incl a min of 06 bolts and nuts,four on bolt plate and two on plate, 200mm long, plate type, complete all as specified and directed.

S&F in repair of MS sliding door bolts,plate type,stove enamelled black,with bright bolt not less than 12 mm dia with and incl a min of 06 bolts and nuts,four on bolt plate and two on plate, 150mm long, plate type, complete all as specified and directed.

S&F in repair of Aluminium anodised 150mm long hasp & staple type, incl bolt to hinge plate and fix with screws complete all as specified and directed.

S&F in repair of Aluminium anodised 100mm long hasp & staple type, incl bolt to hinge plate and fix with screws complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size with swivel joints incl fixing to steel pipe/union complete all as specified and directed.

S&F in repair of MS 100mm long hasp & staple type,, incl bolt to hinge plate and fix with screws complete all as specified and directed complete all as specified and directed.

S&F in repair of Aluminium anodised floor door stopper 140 mm with hard drawn steel spring long, complete all as specified and directed.

S&F in repair of Butt hinges, 100 mm size, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F in repair of Butt hinges, 75 mm size, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F in repair of Butt hinges with galvanised MS hinge pin, 100 mm size, aluminium anodised extruded, B-21 type, complete all as specified and directed.

S&F in repair of MS ordinary rat tail rod pattern springs of size 300mm incl roller & roller plate, complete all as specified and directed.

S&F in repair of MS bright polished Cup board knobs, 40mm dia size with nut, screw & washer, complete all as specified and directed.

S&F in repair of magnatic catcher for cupboard and kitchen cabinets, complete all as specified and directed.

S&F in repair of Aluminium anodised (pegset) hat and coat hooks,solid body,175mm to 250mm with six hooks, complete all as specified and directed.

Hacking out old broken glass (any thickness,any quality or description ) from wooden frames or stone,concrete or brick surrounds,glazed with putty or fixed with beadscomplete all as specified and directed.

S&F 3 mm thick sheet figured glass pin headed type, not exc 0.50 sqm in each pane, complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing type, not exc 0.50 sqm in each pane, complete all as specified and directed.

S&F in repair of SS wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm, and fixed with SS wire staples,complete all as specified and directed.

S&F in repair of 18/19mm thick prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws with timber frame work complete all as specified and directed.

S&F in repairs Block boards 18/19mm thick, grade 2 quality, exterior grade, commercial type, fixed with screws to timber frame-work as in shelf complete as per the specifications and directed.

S&F in repair of curtain rod 25mm dia anodised aluminium alloy CP with incl wall mounting brackets,stops,rollers complete all as specified and directed.

S&F in repair of door seal 20 to 25 mm wide with GI Powder coated flap fixed to wooden doors with screws, complete all as specified and directed.

S&F in repair of Ball valves, 15mm dia, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F in repair of Ball valves, 20mm dia, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F in repair of Ball brass valves, 25mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair of PTMT waste coupling, 32 mm dia, half or full thread, complete all as specified and directed.

S&F in repair of PVC waste pipe 900mm long, 32mm dia size, complete all as specified and directed.

S&F in repair of PVC connection 450 x 15mm dia, PTMT nuts at both end, complete all as specified and directed.

S&F in repair of PVC connection 600 x 15mm dia, PTMT nuts at both end, complete all as specified and directed.

S&F in repair of Hot water connection (Braided Hose type), 450 x 15mm dia, Brass nuts at both end (for geyser), complete all as specified and directed.

S&F in repair of PVC seat cover, suitable for existing EWC, complete all as specified and directed.

S&F in repair of Brass Spindle for Bib Cock 15 mm, complete all as specified and directed.

S&F in repair of GI Pipe 15 mm Medium Grade, with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.

S&F in repair of GI Pipe 20 mm Medium Grade, with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.

S&F in repair of PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair of PVC(SWR) Pipe 110 MM Ring fitted joint of Pressure Rating 6 Kgf/m2,fixed to walls , complete all as specified and directed.

S&F in repair of PVC(SWR) Pipe 75 MM Ring fitted joint of Pressure Rating 6 Kgf/m2,fixed to walls , complete all as specified and directed.

S&F of PVC(SWR) Bend any radius suitable for 110 mm Pipe, complete all as specified and directed.

S&F of PVC(SWR) Bend any radius suitable for 75 mm Pipe, complete all as specified and directed.

S&F in repair of CP bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, fancy type complete all as specified and directed.

S&F in repair of CP Pillar cock, 15 mm dia with flange made of cast copper alloy fancy type, complete all as specified and directed.

S&F in repair of CP fancy type stopcock, 15 mm dia with flange made of cast copper alloy, complete all as specified and directed.

S&F in repair of CP wash basin mixer, pillar type with out popup waste system, 15 mm dia with flange made of cast copper alloy, complete all as specified and directed.

S&F in repair of CP wash basin mixer, swan neck type with out popup waste system, 15 mm dia with flange made of cast copper alloy, complete all as specified and directed.

S&F in repair of CP wall mixer, incl provn for shower connection, 15 mm dia with flange made of cast copper alloy, complete all as specified and directed.

S&F in repair of CP wall mixer swan neck type, for kitchen 15 mm dia with flange made of cast copper alloy, complete all as specified and directed.

S&F in repair of CP two way angular stop cock, 15 mm dia with wall flange, ISI Marked, complete all as specified and directed.

S&F in repair of CP Towal rail, 600 mm long with flange made of brass complete all as specified and directed.

S&F in repair of SS grating of 125 mm dia size, complete all as specified and directed.

S&F in repair of SS grating of 125 mm dia size with hole for waste pipe, complete all as specified and directed.

S&F in repair of CP Handshower (health faucet) with 8 mm dia, 1, complete all as specified and directed.0.9 mtr long flexible tube & wall hook, made of cast copper alloy, complete all as specified and directed.

S&F in repair Grating round 140 mm size of PTMT (Minimum weight 50gms) complete all as specified and directed.

S&F in repair Grating Square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed.

S&F in repair of Looking Mirror, 600mmx450mm size and 5mm thick beveled edge with 6mm thick pvc back sheet, complete all as specified and directed.

S&F in repair of Gun-metal gate valve with iron wheel, screwed both ends, 20 mm bore size, complete all as specified and directed.

S&F in repair of Gun-metal gate valve with iron wheel, screwed both ends, 15 mm bore size, complete all as specified and directed.

S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed.

S&F in repair of SS towel rack 600mm long with three hooks, complete all as specified and directed.

S&F in repair 32mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S&F in replacement of 1st quality vitreous china squatting pan (IWC) Orissa pattern of size 580x440 mm, white colour with integral foot rests water closet including flush pipe but exluding flushing cistern, duly fixed in lime concrete bedding and making good of floor surface, complete all as specified and directed.

Supply & Fix in repairs Vitreous China wash down water closet pan (pedestal pattern), EWC, coloured including jet system & matching coloured seat cover fixed ccomplete all as specified and directed.

S&F repairs safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S&F repairs ball bearing for rolling shutters complete all as specified and directed.

Running welding in repairs not exc 6mm thickness of metal to be welded complete all as specified and directed.

Welding in repairs n. exc 2.5cm in length n exc 6mm thickness of metal to be welded complete all as specified and directed.

M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

M&L for glazed ceramic colour tiles in vertical surface of size 450 X 300 x 7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as specified and directed.

M&L Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matset and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and directed.

S&F in repair for aluminium (Extruded section) body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 60 to 80 kg complete all as specified and as directed.

S&F in repairs rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, complete all as specified and directed.

S&F in repairs rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered 1000 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all specified and directed.

All as per Ser item No 86 above but not exc 1.5 sqm each complete all as specified and directed.

S&F for 35 mm thick second class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sided (feather edged), or veneered particle board with commercial face veneers, etc are provided with stiles and rails as specified in SSR Pt-I section 8, clause 8.24 (a) complete all as specified and directed.

M&L for 30mm thick second class hard wood glazed & skeleton shutter for doors (fully glazed or gauged) open rebated & prepared to receive glass, gauge etc (with sash bars) edges of framing plain, chamfered sash bar, or rounded, fitted without & mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section–8, clause 8.24(b) and conforming to IS-1003 Part-I & II, complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, copings, bond stones, bed plates for hold fast and the like including weathering, slightly rounded or chamfered angles and throating, , complete all as specified and directed.

M&L for mild steel angles, bars, flats etc, as in hold fasts, pipe clamps, plain angle cleats for securing purlins, supports for stiffening of fencing, wall ties and similar small articles confirming to Fe-290 Gde E-165, complete all as specified and directed.

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for doors/windows chowkets conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F in replacement of toilet paper roll holder with flap made of cast copper alloy, chromium plated, complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in replacement of PVC made multipurpose cabinet mirror with front openable door of overall size 350 x 450 mm, complete all as specified and directed.

S&F in replacement of waste coupling, chromium plated (half or full threaded), 40 mm dia size, complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid in any mortar completer all as specified and directed.

M&L 20 mm thick granite slab, tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab, complete all and specified and directed.

M&L for preparation of new or previously untreated surfaces steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed

M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description not otherwise described exc 10 cm width or girth and applying two coat of synthetic enamel paint over and including a coat of primer and layer of putty/filling material to get smooth & level finish, complete all as specified and directed.

S&F extruded Aluminum anodised handles 150 mm long, fabricated type, complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts 150 mm long of extruded section, complete all as specified and directed.

S&F Aluminium anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets,cast or extruded type 250mm long, plate type, complete all as specified and directed.

S&F 100 mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F Aluminium anodised floor door stopper 140 mm with hard drawn steel spring long, complete all as specified and directed.

S&F in replacement of MS window handle lever type , complete all as specified and directed.

S&F in replacement of MS peg stay, 300 mm long for MS window, complete all as specified and directed.

S & F in repair for stainless steel kitchen plate rack size 900x750x230 mm including fixing arrange ment to walls with rawel plug or wooden plugs complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste cupling, wastepipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in replacement of SS soap case premium quality, complete all as specified and directed.

Cutting openings, through brick walls for door, window and other penings or enlarging existing openings. Converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and tacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m built in cement mortar complete all and specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished fair and even complete all as specified and as directed.

Preparing newly plastered surfaces of wall and applying two coats of oil bound distember over 1 mm putty and a coat of chalk whitening primer preparating to make the surface to be plain and smooth before primer complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat of cement based paint over a coat of alkali resistant priming primer, complete all as specified and directed.

S&F in repairs 6 mm thick Veneered decorative plywood, grade 1 (5 Nos of ply) (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work complete all as specified and as directed.

Preparing old plastered surfaces of wall and applying two coats of oil bound distember over 1 mm thick putty and a coat of chalk whitening primer preparating to make the surface to be plain and smooth before primer complete all as sppecified and directed.

M&L for preparation of old plastered surface and applying two coat of cement based paint over a coat of alkali resistant priming primer, complete all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm but not exceeding 2.00 Sq. M each complete all as specified and directed.

Supply & fixing steel windows with side hung shutters including hinges projecting type with steel handle and steel peg stay complete without glazing bars, dovetailed or welded,all as specified and directed.

Supply & fixing steel windows with side hung shutters including hinges projecting type with steel handle and steel peg stay complete with glazing bars, dovetailed or welded.all as specified and directed.

S&F SS wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm, and fixed with SS wire staples,complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft loose soil all as specified and directed.

Dismantling posts & struts; (wood, steel or R.C.C) any section, including taking out embedded portion (embeded in conc) & making good distributed ground complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Supplied only Chain link MS galvanised fencing, of size 100x150mm wt not less than 2.50 kg/sqm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specified and directed.

M&L for erection of posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F for mild steel screw bolts (machine made) diameter of neck 5 to 10 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exc 10 cm long, complete all as specified and directed.

M&L for MS bars 10 mm dia and over cut to length bent to shape required and all as specified conforming to gde Fe 410- W for securing chain link fancing complete all as specified and directed.

M&L two coat of synthetic enamel paint over a coat of red oxide on newly steel surfaces of any description,over 10cm in width or girth including preparation of surface complete all as specified and directed.

M&L cement concrete in foundations filling and mass concrete type C-2, 1:3:6 using (40mm graged aggregate) complete all as specified and directed.

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for pipe line or for manholes not exceeding 10 Sqm on plan and not exceeding 1.5m in depth in any type of soil and getting out complete all as specified and directed.

All as per Ser item No 132 above but depth exc 1.5m and n.exc 3.00m complete all as specified and directed.

Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified and directed.

Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished even and smooth complete all as specified and as directed. Note: water proofing compound shall be measured seprately.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished fair and even complete all as specified and as directed.

Supply only Integral water proofing compound complete all as specified and directed.

Cutting into existing manholes for connecting new drains,internal dia of pipe150 mm, making good to pipes and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

Demolition and breaking up drain pipes 150mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for Salt glazed stoneware (SGSW) drain pipes 150 mm bore laid and jointed on concrete bed, complete including testing etc complete all as specified and directed. Note : Concrete bed shall be measured and paid for separately.

M&L cement concrete as in coping concrete type B-1, 1:2:4 using (20mm graged aggregate) complete all as specified and directed.

Cleaning of sewage line any size,incl taking out sludge in any form along with all other foreign material by mechanically or mannually and taking out side from MoD land by any means duly covered complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level) built in cement mortar, complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment made of and complete all as specified and directed.

M& L for sand cushioning under floor or in fdn incl watering and consolidation, complete all as specified and directed.

M&L for 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) in sub base of flooring/ hard standing complete all as specified and directed.

Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed.

M&L for Brick work old size with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work old size with fly ash bricks, straight or curved on plan to any radius radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

SCH 'A' PART-II (E/M WORKS)

Supply and fixing in replacement Modular switch 6 amp one way 230 V incl dismentling of old unserviceable switch of any make all as specified & directed .

Supply and fixing in replacement Modular switch 16 amp one way 230 V incl dismentling of old unserviceable switch of any make complete all as specified and directed.

Supply and fixing in replacement Modular socket 6 amp 5 Pin one way 230 V complete all as specified and directed.

Supply and fixing repair Modular socket 16 amp 5 Pin one way 230 V incl dismentling of old unserviceable switch of any make complete all as specified and directed.

Supply and fixing in replacement Modular fan Regulator step type and make, 120 watt , 230 Volts ismentling of old unserviceable regulator complete all as specified and directed.

Supply and fixing in replacement modular cover plate with frame 4 module type for fixing of modular switch socket, regulators, blank plates etc incl dismentaling old unserviceable cover plate complete all as specified and directed.

Supply and fixing in replacement modular cover plate with frame 8 module type for fixing of modular switch socket, regulators, blank plates etc incl dismentaling old unserviceable cover plate complete all as specified and directed.

Taking down ceiling fan/Exhaust fan, sealing cable end,dismantling blades and removing fan and blades to store or repair and refixing in same position including connector from ceiling rose to fan connector complete all as specified and directed.

S&F in replacement sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-42 DB's suitable for one MCB SPN as incoming and 2 MCB SP as out going,SPN 4Way complete incl dismentaling of unservceable DB complete all as specified and directed.

S&F in replacement sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 6 MCB SP as out going SPN 8 way complete incl dismentaling of unservceable DB complete all as specified and directed.

S&F replacement sheet metal enclosures 415 volt TPN 4 way with 200 Amp rated bus bar, double door IP-43 DB's suitable for one No 100 Amp 10 KA TPN MCCB as incoming complete incl dismentaling of unservceable DB complete all as specified and directed.

Supply and Fix in replacement MCB Single pole"C" series 6-32 Amps 10 KA, 240V, ISI marked incl dismantaling old unserviceable MCB SP complete all as specified and directed.

Supply and fix MCB 40A - 63A, 10 KA, SPN, 'C' curve, 240 V, 50 Hz complete all as specified and directed.

Supply and fixing in replacement MCB TPN C Curve 40 to 100 Amps, 415 V 10 KA incl dismantaling of old unserviceable TPN MCB complete all as specified and directed.

Supply and fixing PVC insulated and unsheathed FRLS H single core multistranded copper conductor for repair, in existing conduit of size 1.5 sqmm as in replacement of any defective/burnt circuit incl taking down old UNSV cable complete all as specified and directed.

Supply and fixing repair PVC insulated and unsheathed FRLS H single core multistranded copper conductor for repair, in existing conduit of size 2.5 sqmm as in replacement of any defective/burnt circuit.incl taking down old UNSV cable complete all as specified and directed.

Supply and fixing repair PVC insulated and unsheathed FRLS H single core multistranded copper conductor for repair, in existing conduit of size 4.0 sqmm as in replacement of any defective/burnt circuit.incl taking down old UNSV cable complete all as specified and directed.

Supply and fixing repair PVC insulated and unsheathed FRLS H single core multistranded copper conductor for repair, in existing conduit of size 6.0 sqmm as in replacement of any defective/burnt circuit.incl taking down old UNSV cable complete all as specified and directed.

Supply and fixing in replacement Modular Bell push any type and make 6 amp one way 230 V taking down old UNSV bell push all as specified & directed.

M & L for point wiring for Modular fittings complete with 1.5 sqmm FRLS insulated, unsheathed, multistranded, 11000 Volt grade copper conductor cable single core conforming to IS:694 alongwith one run of 1.5 sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC Conduit conforming to IS:95367(Pt-III) and its all accessories/junction boxes/inspection covers etc. of suitable size but not less than 20 mm (OD), concealed in wall/floor etc including provision of Modular Cover Plates with frame and 1.5 sqmm PVC insulated Unsheathed stranded copper conductor(FRLS) cable for common earth and connecting to Earth Dolly all as specified and directed. Note-Rates of chasing/cutting and making goods shall be be included in the unit rate.

One light point/Fan Point/Ext Fan Point/ Bell Point controlled by one, one way switch

One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch.

One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch.

All as per Ser item No 171 above but with using 2.5 Sq mm single core multistanded copper conductor cable including 2.5 sq mm PVC insulated unsheathed stranded copper conductor for common earth wire for 6 pin 16 Amp socket outlet on independent board complete all as specified and directed.

All as per Ser item No 171 above but with using 4 Sq mm single core multistanded copper conductor cable including 4 sq mm PVC insulated unsheathed stranded copper conductor for common earth wire for 6 pin 16 Amp socket outlet on independent board complete all as specified and directed.

S&F in replacement LED light fitting 1 X 20 watt (4 feet), decorative ultra slim type, with inegral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete and incl taking down old UNSV fitting all as specified and directed.

S&F in replacement LED light fitting 1 X 9 watt (2 feet), decorative ultra slim type, with inegral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete and incl taking down old UNSV fitting all as specified and directed.

Supply and fix in replacement of LED street/security light fitting 35 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable of size 0.5 sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and as directed.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size incl taking down old UNSV Bulkhead fitting complete all as specified and directed.

Taking down the defective LED street light fitting/security light fitting of various wattage from 45 to 120 watt from 9m/11m pole etc from any position/height and indentifying the fault and replacing the defective LED driver/replacing the burnt wiring and re-assembling the fittings and re-fixing in its original position and testing for proper functioning complete all as specified and directed. Note :- Supply only of LED driver and supply and replacement of cable shall be measured and paid separately under relevant items of BOQ.

Supply and fixing in replacement of LED driver as per sample suitable for existing make & model of 120 watt LED street light fitting complete all as specified and as directed.

Supply and fixing in replacement of LED driver as per sample suitable for existing make & model of 90 watt LED street light fitting complete all as specified and as directed.

Supply and fixing in replacement of LED driver as per sample suitable for existing make & model of 70 watt LED street light fitting complete all as specified and as directed.

Supply and fixing in replacement of LED driver as per sample suitable for existing make & model of 45 watt LED street light fitting complete all as specified and as directed.

Supply and fix in replacement of 120 Watt LED street light fitting made up of Pressure die-cast aluminium alloy housing with toughened glass, IP66 protection and impact resistance of IK07 and individual high power LEDs with secondary optics having system lumen efficacy ≥100 lm/W, Inbuilt potted electronic LED driver with APFC (SMPS based constant current supply), lower THD, Open Circuit protection, Over Voltage protection, Surge Voltage protection & other safety test as per IS 15885 Part-2/Sec 13 and BIS complying including taking down of existing unserviceable street light fitting of any description complete all as specified and directed. Note :- LM 79 test report, LM 80 report with minimum 9000 hrs testing to support 50K life TTC and dirver NABL accreditated report shall be submitted before execution of work to the Engineer - in - charge.

All as per Ser item No 183 above but of 90 Watt LED street light fitting.

All as per Ser item No. 183 above but of 70 Watt LED street light fitting.

All as per Ser item No 183 above but of 60 Watt LED street light fitting.

Supply and fixing energy saving LED INVERTER TYPE STREET LIGHT 45 WATT AND BATTERY BACK UP OF MINIMUM 8 HOURS environmental friendly, long life , exclusive innovative die-cast aluminium IP 66 security light with high power LEDs as light source , Suitable for 40 mm GI pipe , 5700K LED of Havells or equivalant of Surya/ Philips/ Halonix/ Crompton/ BAJAJ and ,connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. Note :- LM 79 test report, LM 80 report with minimum 9000 hrs testing to support 50K life TTC and dirver NABL accreditated report shall be submitted before execution of work to the Engineer - in - charge.

Supply and fix in replacement of LED Post top light fitting 40 Watt / 45 Watt, made in die-cast aluminum housing with decorative clear opal acrylic diffuser, IP 65 protection, spun aluminum powder coated canopy, low power Warm White (WW) LEDs connected in series and parallel combination with better heat dissipation arrangement with LED color temperature- 3000K ±300K, Highly efficient constant current electronic driver having operating voltage range from 140-280 Volt AC, provided with high voltage, open and short circuit protection, Voltage surge protection 5KV complete suitable for up to 60mm OD pipe entry with fixing bolts including taking down existing unserviceable post top light of any description complete all as specified and directed. Note :- LM 79 test report, LM 80 report with minimum 9000 hrs testing to support 50K life TTC and dirver NABL accreditated report shall be submitted before execution of work to the Engineer - in - charge.

Supply and fix in replacement of GI pipe bracket made out of 40mm dia medium grade GI pipe of 1.50mtr long bent to required shape and fixed to steel tubular / PCC pole with clamps made out of 40mm x 5 mm MS flat fixed with suitable nuts, bolts and washers etc including taking down existing unserviceable bracket of any description complete all as specified and directed.

Supply and fix SMC(Sheet Moulded Compound) outdoor type junction box of size 240mm x 130mm x 95mm (Outside Dimensions) with 63Amps rated four pole connector, one single pole MCB of 6 Amps rating mounted on DIN rail, stainless steel cable glands of suitable size for incoming and outgoing cables including fixing on steel tubular poles / PCC poles with 25mm x 4mm MS clamps (02 Nos), nuts & bolts etc including taking down existing unserviceable junction box of any type and size complete all as specified and as directed.

Making holes (02 Nos - one near cable junction box and other near street light bracket) on existing steel tubular poles of any type, thickness & height through drilling / gas welding work having smooth and chamber edge of hole, for drawing street light control cable through inside of pole complete all as specified and directed by Engineer-in-Charge.

Supply and connect in replacement of PVC insulated and PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volts grade, conforming to IS 694, three core, 2.5 sqmm for connecting from junction box to street light fitting complete all as specified and directed.

Supply and connect in replacement of 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor and overall PVC sheathed in service connections one twin core cable flat or circular of size10sqmm complete all as specified and directed.

M&L for Mild steel strip 50mmx5mm size and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc conforming to Fe.290.Gde-E-165 including taking down framed work of any description complete all as specified and directed.

M&L for pruning of tree branches up to 3.0 meter clearance all around HT/LT overhead lines and depositing where directed at a distance not less than 50 meter complete all as specified and directed. Note - The item will be measured in span lenth between poles. The approx lenth is 50 M.

Material and labour for Surface dressing not exc 15cm deep in any type of soil and site clearance including cutting and removing of plants/bushes, leveling of surface area, throw wastage material out of fencing area/ compound wall up to 50m distance at sub station areas / pump House areas complete all as specified and as directed.

Supply and fix replacement of Shackle Type, Porcelain, vitreous, white, brown or green insulator including galvanized mild steel straps, washers, insulator bolts, washers and nuts for working pressure 1100 volts of size 75mm height and 90mm dia complete all as specified and directed.

Supply and fix replacement of Pin type, porcelain, vitreous, white, brown or green insulator including one galvanized mild steel spindle, two galvanized iron washers and one galvanized iron nut, 100mm height, 65mm dia for 1100 volts grade complete all as specified and directed.

Supply and fix in replacement of Loop type insulator, vitreous porcelain, white, brown or green Small size, with overall dimensions 65 x 90mm, clearance of hole 16mm complete all as specified and directed.

Supply and fix in replacement of Circular LED Highbay light fitting 150 Watts, Integral product with LED, driver, aluminium heat sink for better thermal management, Polycarbonate high transmitivity lens and 3 core wire out for input power, with IP65 degree of protection, including taking down existing highbay light fitting of any description at any height from workshops / aircraft hangars complete all as specified and directed.

Dismantling brought inn or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing or taking credit complete all as directed for the following pipe sizes:-

15mm dia size

20mm dia size

25mm dia size

40mm dia size

50mm dia size

M&L for GI water tubing, medium grade, ISI marked, with and including all fittings i.e. bend, tee, elbow, reducer, union, nipple etc as per site requirement laid in trenches, complete as specified and directed for the following pipe sizes:- Note : (a) The excavation & earthwork shall be measured & paid for separately. (b) The cost of all type of GI fitting i.e. bend, tee, elbow, reducer, union, nipple etc is deemed to be included in quoted rates.

15mm dia size

20mm dia size

25mm dia size

40mm dia size

50mm dia size

S&F Gun-metal gate valves, with iron wheel head, screwed both ends for iron pipe including taking down existing unserviceable gate valve of any description complete all as directed for the following sizes:-

15mm dia NB

20mm dia NB

25mm dia NB

40mm dia NB

50mm dia NB

M&L for cutting of existing road / hard standing up to 15 cm depth for laying of pipes, and making good the disturbed surfaces by providing PCC 1:2:4 type B-1 after laying of pipes and returning filling of soil, complete all as specified and directed. Note:- Excavation and earth work below road / hard standing will be measured and paid under relevant items.

M&L for Plain cement concrete, M-15 (Nominal mix), type C2 ( 1 : 3: 6), (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep and getting out in any type soil for laying pipes etc, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm, complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed.

SCH 'A' PART-III (FURNITURE WORKS)

POLISHING OF FURNITURE ITEMS :- Material and labour for preparation of old existing polished surface of following wooden furniture by scrapping and rubbing down by emery oily spots, ink dots, filling the cracks and pores with paste and putty and malamine spary polish glossy finish make-Asian/Berger to the entire articals with satisfaction of user and Engr-in-charge. All the furnitures should be carried out minor repair and tightining before the polishing. The tint of polish shall be exactly same as of existing polish colour of furniture or as approved by Engr-in-charge. The furnitures articles are mentioned below for the work :-

Polishing of Bed Plywood Top (FD-246,213)

Polishing of Bin Soiled Linen Large/ Small (Internal & External) (FD-372/244/15, FD/E6/MAP/09)

Polishing of Chair Dining CBB (FD-279/161/22)

Polishing of Chair Dining MAP (FD/E6/MAP/10)

Polishing of Chair Writing CBA (FD-20/ 202, 280, 360)

Polishing of Hat Stand with Mirror (FD-361, 362, 233)

Polishing of Peg Table (FD-384, 384, 277, 25 (M))

Polishing of Side Board (Internal & External) (FD-241, 371, 372, 26 (M))

Polishing of Sofa Set 5 Seater (FD/E6/MAP/02, 373, 258)

Polishing of Stool Dressing CB (FD-27, 252)

Polishing of Stool Dressing with Cushion (FD-374)

Polishing of Table 3' X 2' with/without Drawer (FD-42/283)

Polishing of Table Bed Side (Internal & External) (Fd-210, 248, 276)

Polishing of Table Centre (FD-375, 274, 235)

Polishing of Table Dining 6/8 Pers (FD/MAP/E6/09, 376, 273, 239)

Polishing of Table Dressing Gents FD/ DB (FD-379, 230, 31)

Table Dressing Ladies with mirror (FD- 251)

Polishing of Teapoy (FD-278, 382, 034)

Polishing of Book Case (FD-45,355, 356)

Polishing of Chair Dining with Long Back (FD-357)

Polishing of Sofa Set Four Seater (FD-281/373)

Polishing of Table Dressing Ladies (MAP) (FD/E6/MAP/07)

REPLACEMENT OF SOFA CUSHION Removing of old cushion of size 21 x 22 inchs & 4 inchs thick foam and replacing foam cushion of sofa new PU foam cushion of 40 density (make: Sleepwell/ Kurlon and cushion shall be covered with velwet D.decor cloth tapesty cloth of range not less than Rs.600 per meter, colour, shade and quality of tapesty shall be as approved by GE. Complete rest all as specified in drawings & directed. (FD/E6/MAP/07, FD/E6/MAP/02, 273, 258)

Removing of old UNSV Cushion of Table dressing ladies stool (MAP) S&F new PU foam 75 MM 32 Density covered with velwet D.decor cloth Tapesty Cloth of range not less than Rs.600 per meter, colour, shade and quality of tapesty shall be as approved by GE complete all as specified in drawings & directed. (FD/E6/MAP/07)

Removing of old UNSV Cushion of Chair dining cushioned , S&F new PU foam 75 MM 32 Density covered with velwet D.decor cloth Tapesty Cloth of range not less than Rs.600 per meter, colour, shade and quality of tapesty shall be as approved by GE complete all as specified in drawings & directed. (FD/E6/MAP/10)

PAINTING OF STEEL FURNITURE ITEMS:- M & L for prepration of old existing Painting surfaces of following steel furniture items by scrapping the old and fillling the dents by applying putty upto the required level and smoothening the surface with sand paper including denting and minor repairs before applying one coat of primer wherever required and to be spray hamaltone spary Paint dual colour with dark brown and silver gray with synthetic enamel paint make Asian/Berger as approved by Engineer-in-charge/ as dircated by GE. The articles for painting are as under :-

Painting of Almirah Large Steel all Type (Internal & External) (FD-1031/1032/351)

Painting of Almirah MAP Steel (Internal & External) (FD-1030)

Painting of Almirah Medium Steel all type (Internal & External) (FD-350/1032/67(M))

Painting of Almirah Large Steel 1/2H,1/2SH (Internal & External) (FD/E6/MAP/18)

Painting of Almirah Medium Steel 1/2H,1/2SH (Internal & External) (FD-350/1032, 4042)

Rack Shoe Steel (FD-12)

Painting and Canning of Chair Varandah (FD-359/256/333)

Painting of Locker Steel (Internal & External) (FD-257, 1029)

Painting of Bed Hard Steel MAP (FD/E6/MAP/08 (R))

Painting of Cherpoy Steel with Hard Top (FD/MAP-II/01)

Painting of Chair Verandah steel (MAP) (FD/E6/MAP/11)

Painting of Rack Shoe (MAP) (FD/E6/MAP/02 (R))

Painting of Table Computer (MAP) (FD/E6/MAP/03)

Painting of Chair Writing (MAP) (FD/E6/MAP/12)

Replacement Lock of Almirah Large/ Med Steel make -Godrej/Harrision/link (FD-1031/1032/351/1030/ 350/63(M)/FD/E6/MAP/18)

Replacement Handle of Almirah Large/ Med Stainless Steel (FD-1031/1032/351/1030/ 350/63(M)/FD/E6/MAP/18)

Replacement Lock of Locker Steel make -Godrej/Harrision/link (FD-257, 1029)

Replacement Handle of Locker steel (FD-257, 1030)

Notes :-

Supply of complaint handling software system including inventary with following features :- (i) (a) App based complaint system (Android & IOS) : Development and supply of web based app applicable for both android & IOS developed exclusively for GE Jhansi station. The app to consist of various provision to register complaint by user and download complaint by admin. The approval of functions in the app will be done by GE before finalisation of web based app. The app shall have minimum feature of online complaint booking and handling, mapping of Qtr under GE Jhansi, lodge a new complaint, add complaint, assigned complaint to technician, close complaint, inventory, feedback from user as satisfactory or unsatisfactory etc. (b) SMS Features : User can receive compaint docket no by SMS, closed complaint, hold complaint, assigned complaint to technician. close complaint, inventory etc cost in carried on account of sending and receiving SMS from/to user will be included in the quoted rate during currency of contract. No additional payment shall be made on this ground.

(c) Maintenance/upkeeping of all the records and status of day to day all kind of related complaints with works by deploying Data Entry Operators (Skilled) from 9 AM to 5 PM including sunday & holidays. Contractor to provide 04 (Four) elephone number at customer care support/hot line at his service center for enabling the user to lodge his complaint. This number will be attended 24 hrs 07 days work during currency of centre. No additional payment will be made on this ground. The rates also include cost of compatible computer sytstem, printer, peripherals, consumables, telephone, internet/broad band connection etc comprising of following duties:- (i) Downloading the complaints received from service centre on daily basis for assigning the work to the workers of respective trade. (ii) Uploading all the complaint received at the service centre by any mode in the MES E-Complaint System/ App based complaint system and uploading the status of attending the complaints on daily basis so that the back log is not more than one day/as per required complaint as per time/agreement. (iii) Preparing abstract for unattended compalint on daily, weekly and monthly basis and submitting the same to concerned Engr-in-Charge. (iv) Failure in maintaining Service Centre in working condition shall attract recovery @ Rs. 500/- per day. Spare capacity of individuals after attending emergency complaints may be utilized for attending routine complaints. (v) The contractor shall take immediate action to attend all complaint lodged on app based system or any complaint assigned to him through site order book / verbal instructions from Engineer-in-Charge or on telephones / through service centre of app based system or through any mode, from occupants. In all cases he shall attend the complaints in the specified duration. All complaints reveived by any mode shall be entered in the app based system and docket No for the complaint will be raised immediately and notification for the same shall be communicated to user through app and SMS system whichever is possible. All complaints received on phone calls will be only registered in the register and app based system.

(vi) The daily complaint monitoring system on the app based portal will be used for lodging and attending complaints will be provided by the contractor. (vii) The expenditure on account of internet for using app and infrastructure shall be borne by the contractor. Nothing extra shall be paid on this account. (viii) Any compaint raised by user by any means (i.e. app based, telephonically, SMS, Service Centre helpline or any other mode) shall be uploaded on app based software by the auth rep of contractor at Service Centre. If the user gives a feedback that the complaint has been attended unsatisfactorily, it will be considered as unattended. No payment on this ground shall be made to contractor. (ix) In subject work the contractor has to deploy adequate number of (a) Sewer Men (b) Carpenters (c) Plumbers (d) Mason (e) Electrician from 9 AM to 5 PM excluding sundays/Holidays as mentioned for attending and rectiying day to day complaints related to all kinds of repair/replacement to be carried out in the works. The number of helpers to assist the skilled workers are required to be increased based upon number of complaints and quantum of work involved and during emergencies irrespective of working hours as decided by GE/Engr-in-Charge. The rates for same are deemed to be included and nothing extra shall be paid and no claim is admissible on this account. (x) Welder/blacksmith (Skilled) are to be deployed as and when required on complaint basis. The work includes electric welding machine, gas cutter, welding rods (ISI) including hire charges of welding machine, cost of welding rods, transportation of welding machine to site and carrying out other associated operations for attending the complaints and making system fully functional, to the entire satisfaction, complete all as specified and directed by GE/Engineer-in- charge.

(xi) The contractor is also required to deploy 01 (one) site Engineer (Skilled) who will amicably supervise/ assist the entire works. The qualification shall be Degree in Civil Engineering with 03 years experience or Diploma in Civil Engineering with 05 years experience. Notes:- (i) Quoted rates shall include repair of all minor items such as cups, washers, nuts & bolts, screws and all material required except specified under relevant item of supply only (Schedule A part I) etc or any other material as directed by Engr-in-charge. (ii) The quoted rates shall also incl the labour part for all the supply only items as enlisted under sch A part-I. (iii) Materials retreived from repair/replacement of parts or attending complaints, other than mentioned in credit schedule shall be the contractor's property and nothing shall be recovered from the contractor. Rates quoted are deemed to be inclusive of this aspect. (iv) Apart from above based upon Number of complaints & quantum of work involved and during emergencies irrespective of working hours, the additional work force is required to be deployed accordingly as decided by GE/Engr-in-Charge. The rates for same is deemed to be included in this item only and nothing extra shall be paid and no claim is admissible on this account.

(v) The bidders are advised to pay due cognizance while quoting their rates with respect to minimum fair wages, periodical hikes in wages, repair/replacement of parts, labour charges for fixing of supply only items, extra manpower required keeping in view quantum of complaints/works and during emergencies for timely disposal and user facilitations for which no excuses shall be entertained. (vi) The contractor is responsible to provide all T&P to all the manpower deployed, items such as Drill Machines, cutters, welding machines, scaffoldings etc as and when required at site. (vii) It may also be noted that the subject CA is for 09 months therefore the periodical change of workforce as per labour laws is the sole responsibility of the contractor i/c payment of minimum wages plus allowances etc and no worker shall have any lien/ claim of permanency in Govt Services during or after the contract period. (viii) For the details of the work force/labours required in the subject work refer PS clause.

(ix) Any other misc works/services connected with user facilitation as per direction of GE/Engr-in-Charge. (x) Recovery on Absentees The contractor will maintain attendance records of the staff, which will be checked by the Junior Engineer/Engineer-in-Charge/GE of the work. In case of absence of any staff, recovery shall be made at the following rates: (a) Skilled @1500/- per day/ per person. (b) Semi-skilled @1200/- per day/ per person. (c) Unskilled @1000/- per day/ per person. (xi) Recovery on non attendance of complaints. The contractor shall take immediate action to attend any complaint assigned to him through site order book/verbal instructions from Engineer-in-charge or on telephones, MES call centres/IVRS from occupants. In all cases he shall attend the complaints in the specified duration. Penalty for non attending Complaints:- (a) Complaint pending 3-12 hours - 100 Rupees per complaint. (b) Complaint pending 12-24 hours - 200 Rupees per complaint. (c) Complaint pending 24-48 hours - 500 Rupees per complaint. (d) Complaint pending more than 48 hours - 1000 Rupees per complaint. (xii) Recovery on non wearing of uniform The employee and labourers engaged by the contractor under this contract shall wear neat and clean uniforms as approved by Engineer-in-Charge along with name badges, else recovery shall be made @ Rs 50/- per person per day.

M/S Ritu Tandon

RAVI TRADERS