GE/PNH-46/2021-22

Amount

Excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for laying of GI pipe/ UG cable and getting out in soft / loose soil complete all as specified and directed.

Excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for laying of GI pipe and getting out in bituminous rood cutting complete all as specified and directed.

Removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting piont complete all as specified and directed.

Returning filling in and including spreading, levelling,watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

M&L for PCC 1:3:6 (nominal mix) type C-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.

Taking down steel water tubing and connections of 50/40/25/20mm dia pipe line for refixing or removal to store complete all as specified and directed.

M&L for refixing old steel tubing 50/40 mm bore including all required fittings and cleaning, connections in new or old position complete all as specified and as directed.

M&L for GI pipe 50mm dia, medium grade galvanised of following sizes laid in trenches or laid in floors/wall including flanges after a interval of every 03 length duly welded, nuts & bolts gaskets, Tees, elbows, bends, sockets and reducers complete all as specified and directed.

S&F GI tubing medium grade with all fittings, laid in trenches, or fixed alongwith walls/floors including all fittings etc. bore of pipe 40mm, Complete all as specified and directed.

S&F GI tubing medium grade with all fittings, laid in trenches, or fixed alongwith walls/floors including all fittings etc. bore of pipe 25mm, Complete all as specified and directed.

S&F GI tubing medium grade with all fittings, laid in trenches, or fixed alongwith walls/floors including all fittings etc. bore of pipe 20 mm, Complete all as specified and directed.

S & F in repair gate / globe valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed for bore of following size:-

20 mm bore.

25 mm bore.

40 mm bore.

50 mm bore.

S&F in repairs Non Return Valve cast iron of size 50 mm dia ISI Marked with flanged ends including necessary fixing arrangement such as rubber insulation, packing rings, jointing materials nuts, bolts, washers gaskets and packing materials, etc of suitable size including testing complete all as specified and as directed.

Excavation in trenches n. exc 1.5 mtr wide and but exc 1.5mtr in depth for foundation of pole and getting out in any type of soil complete all as specified and directed.

Supply and laying of approved quality sand under earth and all around the under ground cable in trenches for cable cushioning complete all as specified and directed.

Supply and laying brick cable cover,old type of size 230x115x75 complete all as specified and directed by engineer in charge.

S&F Stay assembly complete with stay rod 20 mm accessories all as shown in plate No. 1 of SSR Part-I including galvanised steel wire stranded stay strand of size 7/4mm with loop type insulator stay clamps, excavation and PCC work etc complete all as specified directed.

Supply and erecting in true vertical steel tubular swaged pole, 9 metre long, complete with mild steel base plate 6mm thick of size 300mm x 300mm, B-118 finial taper plug, bolts, nuts, washers and screws, type 410 SP-31 with painting with two coats of aluminium paint over a coat of red oxide including taking down pole any type complete all as specified and directed. Note : Excavation, earth work and PCC in foundation of poles, coping etc shall be measured and paid separately under respective items of work

Supply and fixed in repair aluminium conductor steel re-inforced (ACSR) of size 6/1x2.59 mm (weasal) and 6/1x2.11 mm of . for OH lines on concrete poles, stretching without kinks and bends, binding with (rates inclusive) binding wire complete all as specified and directed.

M&L for renewal of earthing complete with galvanised steel earth plate electrod 600mmx600mm x6.0mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr deep below normal ground level connected to in and including galvanised iron strip 32x6mm upto test point including providing test point inclulding funnel,wire mesh, charcoal dust, salt etc and 40mm bore 5 mtr long light grade GI protection pipe for earth strip and GI watering pipe 20mm dia bore light grade, 40mm thick precast RCC 1:2:4 type B1 cover reinforced with XPM, weight not less than 4 Kg /Sqmm with suitable handle of 6mm round MS bars and angle iron 40x40x3mm frame of pit cover, PCC pit of PCC 1:3:6 type C-2 excavation earth work in soft/dense soil all as specified and shwon in electric plate No 5 of SSR part I complete all as specified and directed.

Materials and Labour for laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 185 sqmm 3.5 core all as per IS complete all as specified and directed. Make : Havells/Polycab/Finolex.

All as per ser item N0-25 above but Sec Area 120 Sqmm 3.5 core complete all as specified and directed.

All as per ser item N0-25 above but Sec Area 95 Sqmm 3.5 core complete all as specified and directed.

All as per ser item N0-25 above but Sec Area 70 Sqmm 3.5 core complete all as specified and directed.

All as per ser item N0-25 above but Sec Area 50 Sqmm 3.5 core complete all as specified and directed.

All as per ser item N0-25 above but Sec Area 25 Sqmm 3.5 core complete all as specified and directed.

All as per ser item N0-25 above but Sec Area 16 Sqmm 2 core complete all as specified and directed.

All as per ser item N0-25 above but Sec Area 10 Sqmm 2 core complete all as specified and directed.

Dismantling of steel/PCC pole any type any size from existing place and depositing and taking out as directed, complete all as specified and directed.

M&L for dismantling of insulator any type complete all as specified and directed.

M&L for Dismantling of ACSR conductor any type any size complete all as specified and directed by engr-In-Charge.

S&F GI light grade tube of size 50 mm dia for laid in trenches/ wall for protection of cable complete all as specificifide and directed.

M&L for PCC 1:2:4 type B-2 (using 20 mm graded crushed stone aggregate) for copping of pole, as in benching including whitering slightly chamferred angles and finished exposed surfaced even and smooth including necessary form work, complete as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) cement concrete in as filling of mass concreteof pole, complete as specified and directed.

M&L for cutting of road by drilling/ cheasling of road of any type ie bituminious/PCC for pasing/ laying of cable as per required , including inserting of GI pipe in to the road, light grade of size 80 mm dia for passing of cable, and making good of cutting area by filling PCCor biyuminious char coal complete all as specified and directed.

Warne Builders

M/S Chib Engineers

MAMTA ENTERPRISES

BINDRA ENGINEERS AND CO

M/S PARSHOTAM KUMAR GUPTA

Jiwan Singh