Repair of Distribution System for Pojewal Distributory No.1 off taking at R.D. 2150 m. of Pojewal Lift Irrigation Scheme off take at R.D. 112.526 m. L S of Kandi Canal Stage II(Outlet RD 7110 Mtr.)

Amount

WATER SUPPLY

(2) Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

((a)) Earth work upto 1.5 m. Depth for

(ii) For Ordinary soil having gravel upto 40%

(10) Supplying and fixing of ISI Marked CI D-joint (complete with nut, bolts & rubber ring) as per IS:8794 for repair of pipe line including cutting , jointing and testing etc. but excluding cost of excavation complete.

(29) Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete.

((e)) C.I Single air valve screwed (Size 80mm)

(66) Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

(a) Size 0.6 m. x 0.6 m.

(b) Size 0.9 m. x 0.9 m.

Supply and fixing of Socketed upvc pipe ISI mark confirming to ISI 4985 ( Premium make such as Supreme/Finolex/Jain etc) 2.5 kg/cm2 pressure (225mm)

Supply and fixing of Socketed upvc pipe ISI mark confirming to ISI 4985 ( Premimum make such as Supreme/Finolex/Jain etc) 2.5 kg/cm2 pressure (250mm)

Providing & Fixing CI/DI Flange end , stem of SS(AIS1410) and Bronze (Gunmetal) working part sluice valve ISI marked 14846 -2000 including jointing, testing and cost of nut, Bolt and inseration sheet, all cariage complete in all respect as per PWD specifications and instructions of the Engineer-in-Charge special quality sluice valve (PN1.6) of premium range such as make Kirloskar as approved by Engineer-In-Charge. (250mm i/d sluice valve flanged)

Supply and fixing of Alpha valve including carriage, re handling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge (225mm)

Supply and fixing of Alpha valve including carriage, re handling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge (250mm)

BRICK WORK

(11.7) First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

PLASTERING & POINTING

(15.9) 12.5 mm thick cement plaster 1:4

CONCRETE

(10.13) Cement concrete 1:2:4

(a) With stone ballast or shingle

(i) mixing by manual means

STEEL AND IRON WORK

(18.18) Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Providing & fixing of uPVC Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. (225mm)

Providing & fixing of uPVC Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. (250mm)

Supply and fixing of UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.(225mm)

Supply and fixing of UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.(250mm)

Supply and fixing of UPVC reducers/increase of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. (225-200mm)

Supply and fixing of UPVC reducers/increase of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. (250-200mm)

Supply and fixing of flange tail end point with CI flange including carriage rehandling loading and unloading , testing etc. complete in all respects as per PWD specifications or instructions of Engineer-in-charge (225mm)

Supply and fixing of flange tail end point with CI flange including carriage rehandling loading and unloading , testing etc. complete in all respects as per PWD specifications or instructions of Engineer-in-charge

Supply and fixing of socket including cariage , re-handling loading unloading , testing etc.respect as per PWD specifications and instructions of the Engineer-in-Charge (225mm)

Supply and fixing of socket including cariage , re-handling loading unloading , testing etc.respect as per PWD specifications and instructions of the Engineer-in-Charge (250mm)

any other item

NEM KUMAR BANSAL CONTRACTOR