CERTAIN SPECIAL REPAIR WORKS TO BLDGS AT MANASABAL UNDER GE 970 EWS

Amount

Demolition of cement concrete un reinforced in ground floors and paving not exceeding 15cm thickness below or above ground level complete all as specified and directed.

Taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.50 but not exceeding Sqm each complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for PCC 1:3:6 type C1 (20mm graded stone aggregate) as in coping complete all as specified and as directed.

M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregat) as in sub floor complete all as specified and directed.

M&L Non skid ceramic coloured tiles 8 to 10 mm thick (Square/rectrangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc over and including 15 mm thick cement screed bed in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Description all as per item above but as on vertical surface such as skirting, dados and risers over and including 10mm thick backing coat in CM 1:4 including taking down plaster complete all as specified and directed.

M&L for Brick work work with old size subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for rendering 15 mm thick on stone masonry surface or surface other than fair face of brick-work in 1:6 and finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1 :4 on fair faces of stone wall surface with water proofing compound @ 2% by weight of cement and finished surface even and smooth with out using extra cement including necessary scaffolding etc. (wpc compound paid seprately).

Supply only integral WPC

M&L 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed..

S&F box type steel window with side hung shutters with glazing bars devetailed or welded, fixed on and including pressed steel frame of size 80mm x 40mm x 1.25mm thick CRCA profile section with box type hinges, steel handle, steel peg stay etc complete all as specified and directed.

Description all as above item but without glazing bars and fixed to steel frame as per item above

S&F 40mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class soft wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fritted to chowkats complete all as specified and directed.

S&F 150mm Aluminium handles,cast type, anodised complete all as specified and directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed on door shutter.

S&F 100mm butt hinges meadium weight cold rold, mild steel and fixed

S&F 200 Aluminium anodised, barrel tower bolts of extruded section and fixed.

S&F 150mm size aluminium anodised barrel tower bolts of extruded section etc all as specified.

M&L for 300mm mild steel sliding door bolts, plate type,stove enamelled balack, with bright bolt not lell than 12mm dia with and including a minimum of 6 bolts and nuts, four onbolt plate and two on staple plate nd fixed, complete all as specifiedand directed.

M&L 3mm thick sheet / float glass, ordinary quality and glazing with oil putty or beads in square n exc o.5 sqm in each pane. complete all as specifiedand directed.

M&L stainless steel wire cloth, 0.56mm nominal dia of wire and averaging width of aperture 1.14mm and fixed with tinned tacks, or galvanised wire staples.

S&F 20mm bore mild steel cromium plated curtain rods, suitable for door/widows curtain with incl necessary fancy type dooms as approved by GE, and fitted to each end, brackets and fixed to wall Complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F MS framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors etc conforming to Fe 410-O or Fe 310-O.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in hold fasts, coping, filling of ms frame bed blocks, etc

M&L 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate incl finished even and smooth with using extra cement as in plinth protection incl necessary form work to edges.

M&L for applying two coats of synthetic enamal paint over a coat of pink primer on newly wood/wood based surfaces over 10cm width or girth incl preparation of new surface complete all as specified.

M&L Two coats of synthetic enamal paint over a coat of red oxide primer on new steel surfaces over 10cm width or girth incl preparation of new surfaces..

M&L One coats of synthetic enamal paint on old painted steel surfaces over 10cm width or girth incl preparation of old surfaces.

M & L for applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer incl. preparation of surfaces of new plasterd surface of walls complete all as specified and directed .

M & L for complete removal of existing treatment and applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer incl. preparation of surfaces of old decorated walls etc, properly making of v shape crakes and filling of all crakes with crakes seal of walls complete all as specified and directed .

M&L for two coat of oil bound destemper over 2mm thick of birla white putty including preparation of newly surface etc all as specified.

M& L for complete removal of existing treatment and applying two coat, of Oil bound distemper over 2mm thick birla white putty including preparation of surface.

Dismantling plain or corrugated steel sheeting, any guage, thickness complete all as specified and directed .

S&F pre painted galvalume alu zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall wixed with self tapping screws as specified.

S&F pre painted galvalume alu zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall wixed with self tapping screws as specified.

Dismantling wall and ceiling board (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F anodised aluminium snap grid frame work size of grid 605 x 605mm for false ceiling complete all as specified and as directed.

M&L for 4mm thick decorative coloured non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws in any position flar or slop and fixed in jointless finish with jointing compound and jointing tape as per manufacturer instructions complete all as specified and as directed.

Taking down steel tubing 15mm bore and connection, incl cleaning for refixing or removal to store.

Taking down steel tubing 20mm bore and connection, incl cleaning for refixing or removal to store.

Demolition of reinforced cement concrete any description and in any position n.exc 15cm thickness.

M&L 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in sub base to receive floor finish complete all as specified and directed.

M&L Non skid ceramic coloured tiles 8 to 10 mm thick (Square/rectrangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc over and including 15 mm thick cement screed bed in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Colour Glazed ceramic coloured tiles in vertical surface 350X250X7mm or 450x350x7mm thick over and including 10 mm thick backing coat in CM 1:4 and set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

Demolition of Stone slabs and tile slaid bedded and pointed in any mortar of any description or thickness in floors, aprons etc all specified and directed

M&L granite (of any type) work 20mm thick (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like including 20mm thick screed bed in cement mortar (1:4) and point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed.

M & L for 20-22 mm thick kota stone flooring in a single pieces as in stair treads etc, over and including 20mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

M & L 18-20 mm thick kota stone laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified for riser of steps in single piece ,skriting and dado etc including 10 mm thick backing coat in CM 1:3 complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar sitution.

M&L Chequered cement concrete tiles of Glossy finish of size 20cmx20cmx25mm thick set jointed and pointed in neat cement slurry in floorswith grey cement and pigment including 20mm thick cement screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick on stone masonry surface or surface other than fair face of brick-work in 1:6 and finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick on concrete surface of ceilings in CM 1:4 and surface finished even and smooth with out using extra cement.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed..

M & L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed tothe stiles & rails with suitable PVC sheet beading, and joined together with solventcement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 50mm butt hinges meadium weight cold rold, mild steel and fixed

S&F 2nd class H/W small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, incl all necessary labours, articles n exc 200cucm each.

S&F 100mm Aluminium anodised, barrel tower bolts of extruded section and fixed.

M&L 16mm outer dia for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as pecified and directed.

M&L 20mm outer dia for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as pecified and directed.

Lagging to 15mm pipes used in internal water su pply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842

Cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting n exc 10cm girth. pinning in, making good to facings where required and pointing in CM 1:3 on stone walls.

S&F in repair 15mm bore CP fancy type brass bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed (weight not less than 400gms).

S&F 15mm bore stop cock CP fancy type with butter fly handle, screwed down, high pressure for iron pipes or for unions fixed in repairs (weight not less than 400gms).

S&F 15mm bore stop cock (Concealed type) CP fancy type with, screwed down, high pressure for iron pipes or for unions fixed in repairs (weight not less than 400gms).

Soap dish disc (oval) type, mild steel chromium plated of approximate size 100 x 50 x 10 mm, fixed in repairs complete.

S & F Brass chromium plated shower rose 125mm size complete all as specified and directed.

S & F Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms

S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580 X 440 mm white, with integral foot rests incl flush pipe, incl provn of cement concrete bedding and making connection with & including Pors Trap etc complete all as specified and directed.

M&L 32mm dia waste coupling, PTMT for glazed ware sinks, basin, etc with long shanks and fly, flange end incl 32 mm dia waste pipe 450 mm long high pressure complete all as specified and directed.

S & F PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe , fixed in repair complete all as specified and directed..

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F Pillar taps long neck fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipes fixed in repairs complete all as specified and directed .

S&F Brass chromium plated tubular towel rail 600mm long between flanges, 20mm dia, D type etc all as specified.

Dismantling water tanks exec 500 ltr but not exe 1000 ltra and removing to store

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I.

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F 20mm bore Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed in repairs.

S&F PVC (SWR) Pipe single socketed in any length with rubbering joints laid in trenches or in floor for 110mm dia

Ditto - all as per item above but 75mm dia

S&F PVC (SWR) Pipe single socketed in any length with rubbering joints 110mm dia fixed to walls with clamp

-ditto- all as above but 75mm dia.

PVC Bends any redius 110mm dia provided with axcess door

Ditto - all as above but 75mm dia

PVC (SWR) Junction single T equal or unequal 110mm dia provided with eccess door

Ditto - all as per item above but 75mm dia

M & L for PVC (SWR) gully traps 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M & L for PVC (SWR) Nahani traps, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2;4) complete all as specified and directed.

M&L RCC 1:1.5:3 (nominal mix) type A1 using 20mm graded stone aggregate as in landing, cooking platforms, shelves and the like

Use and waste of formwork to soffits of suspended slabs, landings, shelves and similar work n exc 200mmm thick horizondal or sloping.

M&L Mild steel TMT bars 6 to 8 mm dia and over cut to length bend to shape as required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe 410-O or Fe 310-O.

Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, treating ends of posts, backs of chowkats, etc, area tarred exc 0.1sqm and n exc 0.5sqm each and treated with tar or coal tar black paint.

Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, treating ends of posts, backs of chowkats, etc, area tarred n exc 0.1sqm each and treated with tar or coal tar black paint.

M&L One coats of synthetic enamal paint on old painted wood/wood based surfaces over 10cm width or girth incl preparation of old painted surface..

M&L three coats of White wash on newly plaster surface of wall including preparation of newly plaster wall surface.

M&L one coats of White wash on old plaster surface of wall including preparation of old surface.

M&L vetrified ceramic light/dark shade tile 9-10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc.including 15 mm thick cement screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match

Ditto as per item above but as on vertical surface such as skirting, dados and risers over and including 10mm thick backing coat in CM 1:4 including taking down plaster complete all as specified and directed.

M&L Machine cut Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 20mm thick screed bed in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shage of granite, grinding and polishing complete all as specified and directed

Ditto as per item above but as on vertical surface such as skirting, dados and risers over and including 10mm thick backing coat in CM 1:3 including taking down plaster complete all as specified and directed.

S&F 125 mm long Aluminium handles, cast type,anodised complete all as specified.

Lagging to 20mm pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white including white seat cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in chromium plated brass health jet foucet suitable for EWC including CP chord and brass nozzle and fixed to pipe all as specified and directed.

S& F soap dish brass chomium plated fiexed to wall with brass chromium plated screw and plastic plug etc.

S&F in repairs brass chromium plated wall mixer for mixing Hot & cold water , high pressure, screwed down for 15 mm bore iron pipe fixedcomplete all as specified and directed.

S&F vitreous china wash basin, white flat back, size 550 X 400mm incl brackets, CP waste cupling or beding in cement mortar to wall Complete all as specified and directed.

S&F 75mm dia of out let cast iron floor trap with grating including jointing to waste pipe in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Dismantling water tanks exec 250 ltr but not exe 500 ltra and removing to store

S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I.

PVC Bends any redius 110mm dia

M&L for concrete bed of PCC 1:4:8, type D2 using 40 mm grade stone aggregate for PVC(SWR) 100 mm dia bore bedding & hunching copletely.

M&L for concrete bed of PCC 1:4:8, type D2 using 40 mm grade stone aggregate for PVC(SWR) 75 mm dia bore bedding & hunching copletely.

M&L precast reinforced cement concrete 1:1½:3 type A-1 using 20 mm graded stone aggregate as in cover slab of mane hole set in cement mortar 1:4 complete all as specified and directed.

M&L two coats of White wash on old plaster surface of wall including preparation of old surface.

M&L two coats of White wash to ceiling to exiting surface of ceiling including preparation.

M&L Second class soft wood in scantlings timber frame and fixed wrought finish complete all as specified and directed.

M&L for Second class soft wood plain fillets, square, rectangular or traingular in section, exc 3 sqcm but not exc 6sqcm, clean swan, secured with nails or brds complete all as specified and directed.

M&L 12mm thick veneered decorative plywood, grade1 (with BWR resin) with decorative face veneeres on one faces, fixed wht screws to timber frame work complete all as specified and directed.

S&F transparent toughened glass 10 mm thick any size fixed in aluminium frame complete all as specified and directed.

S&F solar control film 50 micron reflective type (gareware sun control or equiva lent) complete all as specified and directed.

M&L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing and aluminium grill of standared pattern as approved etc. complete all as specified and as directed.

M&L for Anodised aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws and mortice lock etc. make godrage or equivalent approved by GE. complete all as specified and as directed.

S & F fully glazed aluminium window sliding type consisting of frame 63X47mm,shutters 39x18mm with rollers and locking arrangements with 4mm thick tinted glass with rubber gasket and Aluminium beading etc including necessary cutting holes on wall and floor & confirming to IS complete all as directed by engr-in-charge (wall thickness of aluminium member of aluminium member is min 1.5 mm),complete all as specified and directed.

S&F 5.5mm thick sheet/float glass, ordinary qualilty and glazing with oil putty in square Nn exe 0.5 sqm in each pane

S&F stainless steel butt hinges 100mm size medium weight cold rolled.

S&F Door closer Aluminium (extruded section body hydraulically regulated, designation No 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 ktg and fixed.

Taking down copper/alluminium point wiring (light,fan,socket or power) complete by removing all switch, socket,ceilling rose,pendent etc., excluding light fitting and making good the distributed surfaces as existing

Taking down old and UNSV, DB any type including changeover, fuses, MCBs etc., after removing all connection and make good the distributed surface

Point wiring using FRLSH PVC Insulated unsheathed, multi stranded copper conductor cable 1.5 sqmm drawn through and including PVC Conduit, Consealed wiring in wall/ceiling with miled steel modular sunken box and bakelite sheet 3mm thick including all fittings i.e. tees, bands and junction boxes etc., complete for one light/ fan/exhaust point/ bell point controlled by one switch 5Amps one way, using the cable of (1.5 sqmm for phase and neutral and 1.5 sqmm earthing) Note:- (a) wiring shall be done by using colur cording (b) Earth wire shall be of green colour.

All as per the item no 136 above but 5Amp socket outlet on same board complete all as specified and directed by Engr-in-chage.

All as per the item no 136 above but 5Amp socket outlet on indipendant board all as specified and directed by Engr-in-charge.

All as per the item No 136 but for one socket outlet 15 Amps on indipendant board using cable 4sqmm for phase,nutral and earthing complete all as specified and directed by Engr-in-chage.

All as item No 136 but for one socket outlet 15 Amps on Independent board using cable (2.5 Sqmm for Phase & neutral and 2.5 Sqmm for earthing) complete all as specified and directed by Engr-in-chage.

Sheet metal enclosure single door for DBs when MCBs to be used SPN-8 way with 200 Amp rated bus bar complete all as specified and directed

M&L for sheet metal enclosure single door for DBs when MCCBs to be used TPN-4 way,415 volts with 200 Amp rated bus bar IP 43/54, IS-8623 complete all as specified and directed

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning of rating TPN 40 To 100 AMP.

S&F for MCB SPN 40 Amps, 240 V

S&F for MCB SP 6 TO 32 Amps 10 KA 240 V

S&F for switch piano flush type 5Amps one way

S&F in replacement of switch socket combination outlet 2 in 1, 3 pin, 5 Amp, 230 volt flush type.

S&F in replacement of socket outlet 2 in 1, 3 pin, 5 Amp, 230 volt flush type all as specified and directed by Engr-in-charge.

S&F switch socket combination outlet 5/15 Amps 5 in one flush type complete in indipendant board all as specified and directed by Engr-in-charge.

S&F ceiling rose 3 terminal size 50x 65 mm surface type

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

M&L Sub main wiring complte with copper conductor, multi sranded, FRLSH,PVC insulated and sheathed, 6 sqmm, two run 1100 volts grade, incl drawn through PVC sutable size conduit and 6 sqmm single run for earthing.

M&L Sub main wiring complte with copper conductor, multi sranded, FRLSH,PVC insulated and sheathed, 10 sqmm, two run 1100 volts grade, incl drawn through PVC sutable size conduit and 10 sqmm single run for earthing.

S&F 1x20 W LED 6000K (4 ft) decorative ultra slim sqare profile linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient, extruded aluminium body heat shrink, provided for efficient dissipation and integrated electronic driver complete with lamp.

M/s Nasir Rasool Dar

M/S Manzoor and Co

PARVAIZ AHMAD WANI

G N Constructions

M/S Thakur & Sons