Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.0 LAccepted-AOC NO 18 BHARATHI STREET WEST GANDHI NAGAR AVADI CHENNAI 600 054 | CHENNAI | THIRUVALLUR | TAMIL NADU | 600054 | L1 | Accepted-AOC L1 | |
| 2 | L2₹12.8 L+₹47,765 (3.87%)Rejected-Finance NO 17 PETER GNANA PRAKASAM NAGAR MARIYAMMAN KOVIL PO THANJAVUR 611501 | 611501 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹13.2 L+₹88,270 (7.16%)Rejected-Finance NO 15 PULAVAR GOVINDAN STREET GANDHI NAGAR AVADI CHENNAI 600 054 | AVADI | CHENNAI | TAMIL NADU | 600054 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹17.7 L+₹5.4 L (43.6%)Rejected-Finance | L4 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | M/S. SRI RAMANUJA CONSTRUCTIONS L2 | D Subramani & Sons L3 | M/S Mist Hills Enterprices L4 | BKR Enterprises L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling the delivery pipe line of submersible pump set from water mains, Lifting / taking out of GI column pipes of 50 mm dia / 80mm dia Submersible cable / defective Submersible pump set from bore well for repairs and lowering of repaired submersible pump set with GI column pipe 50 mm dia / submersible cable etc complete in the bore well at various sites under GE (AF) Thanjavur, complete upto 110mtrs deep complete all as specified and as directed. | 8 | Job | 6,300 ₹50,400 | 7,000 ₹56,000 | 27,000 ₹2,16,000 | 6,000 ₹48,000 Lowest |
| 2.00 | Disconnecting the electric power supply and opening the centrifugal monoblock pump set of capacity 5-10 HP including opening the Pump checking the serviceability of spares and replacing minor spare parts such as gasket, gland packing, cleaning, painting, greasing, varnishing, reconnecting and testing including writting machine number on body complete. motor and pump painting with two coats of synthetic enamelled paint of approved quality and shade as specified below complete all as specified and as directed:-
(a) Motor and pump - Smoke Grey colour
(b) Coupling guard and motor air grill - Post office Red colour.
(c) Suction line and delivery line in side pump house - Navy blue colour for fresh water pipe lines.
(d) Writing SM/MES No 25 mm wide in white colour on motor and pump. | 7 | Each Job | 1,450 ₹10,150 Lowest | 2,200 ₹15,400 | 14,000 ₹98,000 | 2,000 ₹14,000 |
| 3.00 | M & L for slushing/ flushing of accumulated soil from borewell 150 mm dia & depth up to 120m by using compressed air / special tools / tackles accessories complete all as specified and as directed.
Note:-
The rate shall be inclusive of hiring of Air compressor with fuel / special tools / Accessories including transportation of the same & Labour charges, for specially trained man power for the work of desilting of bore well . | 32 | Per Hour | 3,050 ₹97,600 | 1,300 ₹41,600 | 4,500 ₹1,44,000 | 1,000 ₹32,000 Lowest |
| 4.00 | Supply and fix in repairs borewell cap made out of 5 mm thick MS plate for 250 mm ERW MS pipe complete all as specified and as directed. | 4 | Each | 850 ₹3,400 | 790 ₹3,160 Lowest | 1,300 ₹5,200 | 800 ₹3,200 |
| 5.00 | Supply and fixing in repairs MS clamp made out of 60mm X 6 mm flat iron with pumps / motor complete all as specified and as directed. | 32 | Kg | 65 ₹2,080 Lowest | 150 ₹4,800 | 190 ₹6,080 | 140 ₹4,480 |
| 6.00Dismantling and reassembling the following capacity submersible pump set and centrifugal monoblock pump set after rewinding of motor with suitable size of submersible winding wire/ repairing of pump of different capacity of any model / make including cleaning, painting, greasing and varnishing including replacement of wornout nut & bolts etc complete all as specified and as directed.:- Note:- (i) Spare/Items/Parts for repairing submersible pump set shall be measured and paid separately under relevant items as supply only. (ii) Cost of item/parts which are not covered in sch `A' but are necessary for satisfactory functioning of the pump set shall deemed to be included in the rate quoted for this item. | |||||||
| 6.10 | 20HP motor | 2 | Each | 12,500 ₹25,000 Lowest | 16,000 ₹32,000 | 18,000 ₹36,000 | 15,000 ₹30,000 |
| 6.20 | 12.5 to 15 HP motor | 3 | Each | 9,500 ₹28,500 Lowest | 15,000 ₹45,000 | 12,000 ₹36,000 | 13,000 ₹39,000 |
| 6.30 | 7.5 HP motor | 3 | Each | 9,500 ₹28,500 | 12,000 ₹36,000 | 7,000 ₹21,000 Lowest | 10,000 ₹30,000 |
| 6.40 | 5/6 HP motor | 4 | Each | 6,200 ₹24,800 Lowest | 10,000 ₹40,000 | 6,300 ₹25,200 | 9,500 ₹38,000 |
Tender Value
Refer Docs
EMD Value
₹33,000
Closing Date
25 Jul 2025, 6:00 pmClosed
Garrison Engineer
Garrison Engineer
REPAIR / REPLACEMENT AND REWINDING OF SUBMERSIBLE / CENTRIFUGAL PUMPS / MOTOR CONTROL PANELS WITH ALLIED WORKS AT AFS THANJAVUR
2025_MES_718637_1
8218/E8
Open Tender
Electrical and Maintenance Works
Item Rate
330 days
Garrison Engineer AF Thanjavur
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer
₹33,000
Yes
25 Aug 2025
4 Jul 2025
26 Jul 2025
4 Jul 2025
25 Jul 2025
12 Jul 2025
Amount
Dismantling the delivery pipe line of submersible pump set from water mains, Lifting / taking out of GI column pipes of 50 mm dia / 80mm dia Submersible cable / defective Submersible pump set from bore well for repairs and lowering of repaired submersible pump set with GI column pipe 50 mm dia / submersible cable etc complete in the bore well at various sites under GE (AF) Thanjavur, complete upto 110mtrs deep complete all as specified and as directed.
Disconnecting the electric power supply and opening the centrifugal monoblock pump set of capacity 5-10 HP including opening the Pump checking the serviceability of spares and replacing minor spare parts such as gasket, gland packing, cleaning, painting, greasing, varnishing, reconnecting and testing including writting machine number on body complete. motor and pump painting with two coats of synthetic enamelled paint of approved quality and shade as specified below complete all as specified and as directed:- (a) Motor and pump - Smoke Grey colour (b) Coupling guard and motor air grill - Post office Red colour. (c) Suction line and delivery line in side pump house - Navy blue colour for fresh water pipe lines. (d) Writing SM/MES No 25 mm wide in white colour on motor and pump.
M & L for slushing/ flushing of accumulated soil from borewell 150 mm dia & depth up to 120m by using compressed air / special tools / tackles accessories complete all as specified and as directed. Note:- The rate shall be inclusive of hiring of Air compressor with fuel / special tools / Accessories including transportation of the same & Labour charges, for specially trained man power for the work of desilting of bore well .
Supply and fix in repairs borewell cap made out of 5 mm thick MS plate for 250 mm ERW MS pipe complete all as specified and as directed.
Supply and fixing in repairs MS clamp made out of 60mm X 6 mm flat iron with pumps / motor complete all as specified and as directed.
Dismantling and reassembling the following capacity submersible pump set and centrifugal monoblock pump set after rewinding of motor with suitable size of submersible winding wire/ repairing of pump of different capacity of any model / make including cleaning, painting, greasing and varnishing including replacement of wornout nut & bolts etc complete all as specified and as directed.:- Note:- (i) Spare/Items/Parts for repairing submersible pump set shall be measured and paid separately under relevant items as supply only. (ii) Cost of item/parts which are not covered in sch `A' but are necessary for satisfactory functioning of the pump set shall deemed to be included in the rate quoted for this item.
20HP motor
12.5 to 15 HP motor
7.5 HP motor
5/6 HP motor
Centrifugal Monoblock pump set 10 HP
Centrifugal Monoblock pump set 5 HP
Supply only following spares/parts for motors complete all as specified and as directed. :-
Housing bush for submersible motor.
Shaft grinding and jointing of submersible motor
Thrust bearing for submersible motor.
Sand Guard for submersible motor
Rubber bush for submersible pump of any size.
Gun metal bush for submersible pump.
CI bowl for submersible pump.
Gun metal Ring for submersible pump.
Stud nut for submersible pump.
Pump shaft for submersible pump.
IP for submersible pump & Motor .
Oil seal for submersible pump of any size.
Gun metal impellor for submersible pump.
Stainless steel sleeve for submersible pump of any size.
Bearing for centrifugal monoblock Pump
Removing the unserviceable automatic DOL starter by disconnecting electric supply and provision of new DOL Starter as per existing suitable for centrifugal pump set 3 phase 415V relay range 11-18 amps complete all as specified and as directed.
Supply and replacement of 3 phase contactor, range 32A ML2, FASD suitable for Star Delta Starter complete all as specified and as directed.
Description all as per Srl item No. 9 here-in-before but contactor range 25A ML 1.5 FASD complete all as specified and as directed.
Supply and replacement of 3 phase contactor suitable for DOL Starter complete all as specified and as directed.
Supply and replacement of relay range 20-32 amps suitable for Star Delta Starter ML-2 FASD complete all as specified and as directed.
Description all as per Srl item No.12 here-in-before but relay range 10-16amps complete all as specified and as directed.
S & F in repairs MCB TPN 63 A 10KA complete all as specified and as directed.
S & F in repairs MCB TPN 25A/ 32 A 10KA complete all as specified and as directed.
S & F in repairs MCCB TPN 63A 16KA complete all as specified and as directed.
S & F in repairs MCCB TPN 125 Amps 25 KA complete all as specified and as directed.
M&L in repairs for earthing complete with galvanised earth plate electrode 600 mm X600 mm X6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level not less than 1.5m below normal ground level connected to galvanised iron wire 4mm dia as earth lead by means of nuts and bolts, washer made out of copper or tinned brass and protection with GI pipe of 25mm dia all as specified and testing complete including earth work, PCC chamber, RCC cover with handle, GI pipe 20 mm dia light grade for watering with GI funnel wire mesh, salt, charcoal, lugs complete all as shown in electrical plate No 03 of SSR Part-I as specified and as directed. Note:- The rate is inclusive of earth work and excavatioin in any strata, PCC chamber in PCC 1:3:6 type C1 RCC cover slab 50mm thick with 8mm dia TMT bars both ways at 140mm centre to centre etc.
M&L in repairs Earthing complete with galvanised earth plate electrode 600X600X6mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level not less than 1.5 m below normal ground level connectd to galvanised iron strip 32x6 mm dia as earth lead by means of nuts and bolts, washer made out of copper of tinned brass and protection with GI pipe of 25mm dia all as specified and testing complete including earth work, PCC chamber, RCC cover with handle, GI pipe 20 mm dia light grade for watering with GI funnel wire mesh, salt, charcoal, lugs complete all as shown on electrical plate No 03 of SSR Part-I all specified and as directed. Note:- The rate is inclusive of earth work and excavatioin in any strata, PCC chamber in PCC 1:3:6 type C1 RCC cover slab 50mm thick with 8mm dia TMT bars both ways at 140mm centre to centre etc.
Supply & lay in repairs XLPE insulated, armoured heavy duty electric cable 1100V grade with stranded aluminium conductor of size 25 Sqmm 4 core complete all as specified and as directed. Note :- Excavation, sand cushioning and cable protection will be measured and paid seperately.
Supply & lay in repairs XLPE insulated,armoured heavy duty electric cable 1100 volts grade with stranded aluminium conductor of size 35sqmm 3.5 core complete all as specified and as directed. Note :- Excavation in trenches sand cushioning and cable protection will be measured and paid seperately.
Supply and fixing in repairs insulated and sheathed 3 core flat, submersible cable with copper conductor 1100 volt grade of size 4.0 sqmm complete all as specified and as directed.
Supply and fixing in repairs of PVC insulated and sheathed 3 core flat, submersible cable with copper conductor 1100 volt grade of size 6.0 sqmm complete all as specified and as directed.
S&F in repairs pressure guage 0 to 100 Kg/sq cm 100mm dia complete all as specified and as directed.
Supply & fixing in repairs gland packing of size 15mm suitable for centrifugal pumpset complete all as specified and as directed
Supply and fixing in replacement of LED security Lights 30W with best in class design & robust heat sink along with class leading IP, IK & Surge protections for long lasting performance.and integrated electronic driver with 25 mm GI bracket for fixing of street light with 1.5 sq mm copper conductor for electric connection including clamps , nuts , bolt , washer and sintex FRP box including taking down old one, complete all as specified and as directed.
Supply only in repairs Rubber gasket suitable for flanges 2 to 6 inch and 4 mm thick complete all as specified and as directed.
Supply and providing in trenches using clean dry river/crushed sand for cable cushioning complete all as specified and as directed. Note:- For the measurement only punned thickness only will be considered payment.
Supply and lay well burnt bricks sub class B, old size in trenches for cable protection by removing existing damaged cable protection complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep and getting out in hard/dense soil complete all as specified and as directed
Returning & filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed
Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed
S & F in replacement of heavy duty GI pipe 65mm for suction line including fitting complete all as specified and as directed.
Material and labour for servicing, repair & welded with suitable guage MS sheet/ channel, repair replacement to hinge and repair of locking arrengement and painting of LT panel board/ bore well panel board with two coat of synthetic enamel paints over a coat of red oxide primer to external surfaces including making good disturbed surfaces complete all as specified and as directed.
Supply & fix in replacement of wornout unserviceable column pipe of 65 mm dia UPVC column pipe with ISO 9001:2015 certified standard DN(75mm OD) high tech , hi tensile column pipes suitable for submersible pump with maximum delivery pressure 16 Kgf/cm² including all fittings at one end complete all as specified and as directed.
Supply & fix, replacement of wornout unserviceable column pipe of 50 mm dia UPVC column pipe with ISO 9001:2015 certified standard DN(60mm OD) high tech , hi tensile column pipes suitable for submersible pump with maximum delivery pressure 20 Kgf/cm² including all fittings at one end complete all as specified and as directed.
Supply and fix in repair LED Aviation Obstruction light suitable for over head water tank with and including lamp and fixing arrengement on top of the tank complete all as specified and as directed. as per Bajaj Model BGAV 302 LED or its equivalent.
S & F in repair of aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground of over head tank lightning arrester to earthing complete all as specified and as directed.
S & F in repair test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and as directed
Supply & fix in repairs gun metal foot valve 65mm dia for 5 HP Centrifugal pump set suction line (65mm GI pipe) with gasket complete all as specified and as directed
Supply & fix in repairs CI body foot valve ball type with threaded end 65mm dia for 10 HP Centrifugal pump set suction line (80 mm GI pipe) with gasket complete all as specified and as directed
M&L for Cleaning and removing all scale and dirt, etc, from PVC over head tanks and from mouths of circulating pipes, etc. washed with bleaching powder complete of PVC OH Tank capacity upto 500 ltr & including writing tank capacity, cleaned on date, due on date on out side surface complete all as directed.
S&F in repairs sub main wiring complete with four runs of 6 sqmm single core PVC insulated FRLS cable 1100V grade, multistranded copper conductor cable with two runs of 6 sqmm single core PVC insulated FRLS cable 1100V grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 32 mm dia pvc conduit and conduit accessories all as specified and as directed. Note :- 4 runs of power conductor and 2 runs of earth conductor alongwith one run of PVC conduit will be measured as one unit.
Supply and fix in repairs float valve (Ball brass valves) high pressure of PTMT, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 25 mm dia complete all as specified and as directed.
Supply and fix in repairs float valve (Ball brass valves) high pressure of PTMT, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 20 mm dia complete all as specified and as directed.
Supply and fix in repair on load change over switch ,3phase, 415 V,4pole 125A in sheet enclosure side handle type complete all as specified and as directed
M/S. SRI RAMANUJA CONSTRUCTIONS (BID ID -3363276)
D Subramani & Sons (BID ID -3371605)
M/S Mist Hills Enterprices (BID ID -3358053)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .