Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.8 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹31.2 L+₹4.1 L (15.0%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹32.7 L+₹5.6 L (20.5%)Rejected-Finance PLOT NO 39 SHRI SHIVE NAGAR 05 MOTI BANDHA MACHEDA HARMADA JAIPUR 302013 RAJ | JAIPUR | JAIPUR | RAJASTHAN | 302013 | L3 | Rejected-Finance L3 | |
| 4 | L4₹32.8 L+₹5.6 L (20.7%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹34.8 L+₹7.6 L (28.1%)Rejected-Finance | L5 | Rejected-Finance L5 |
Tender Value
₹34 L
EMD Value
₹68,000
Closing Date
16 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE JAIPUR
Military Engineer Services, HQ Commander Works Engineer, Kalyan Marg, Banipark, Jaipur-06
ADDN/ALTN TO BLDG NO P-52 STATION ENGINEER OFFICER MESS AT CE JAIPUR ZONE UNDER ZONE II OF GE JAIPUR
2024_MES_665135_1
CWE/JPR/82374/E8
Open Tender
Civil Works
Item Rate
180 days
JAIPUR
As per NIT
8 documents required · 8 mandatory
₹0
₹68,000
Yes
16 Jan 2025
11 Jul 2024
18 Sept 2024
11 Jul 2024
16 Sept 2024
25 Jul 2024
11 Jul 2024 - 24 Jul 2024
Amount
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) etc.complete all as specified and directed
Demolition of brick work built in cement mortar including all quoins, arches etc.complete all as specified and directed
M&L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in In cement mortar 1:6 as specified and directed by Engg-in-Charge.
Cutting into old masonry to form toothing for and bonding in new brick or stone work including making good in cement mortar etc.complete all as specified and directed
M&L RCC M-25(Design Mix) using 20mm graded stone aggregates in beams, cantilevers, lintels over 1.5m span,column complete all as directed.
M&L RCC M-25(Design Mix) using 20mm graded stone aggregates in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as directed.
M&L for rough finished formwork to sides and soffits of floor or rooof beams, beam haunching, girder s , lintels, cantilevers, shelves including supports, overhangs etc.for rough finished flat surfaces of concrete etc.complete all as specified and directed
M&L for rough finished formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete etc.complete all as specified and directed
M&L for rough finished formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide etc.complete all as specified and directed
M&L Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape requried, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
All as per item no 10 above but 6mm to 8mm dia as in stirrups
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed
M/L rendering 15 mm thick on stone masonry other than fair faces of brick surfaces in CM(1:6) finished even and smooth with out using extra cement etc.complete all as specified and directed
M/L rendering 10 mm thick on ceiling surfaces in CM(1:3) finished even and smooth without using extra cement etc.complete all as specified and directed
M&L for rendering 15mm thick cement plaster in CM 1:4 on stone wall work including finished even and smooth without using extra cement etc.complete all as specified and directed
M&L for complete removal of existing treatment on walls, including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces etc.complete all as specified and directed
M&L preparation of new plastered surface/unplastered surface of wall and Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth then applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed.
M&L for preparation of new plaster surfaces/unplaster surface of wall and over 1mm thick paris putty over plastered surface and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and as directed.
M&L for preparation of new plastered surface or unplastered surface of ceiling and applying two coats of oil bound distemper over one coat of primer including chalk whiting over 1mm thick paris putty over plastered surface complete all as specified and as directed.
Taking up or down steel tubing and connection including cleaning 15 mm bore etc.complete all as specified and directed
Taking up or down steel tubing and connection including cleaning 20 mm bore etc.complete all as specified and directed
S&F GI tubing medium grade with all fitting 15 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor etc.complete all as specified and directed
S&F GI tubing medium grade with all fitting 20 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor etc.complete all as specified and directed
Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as directed.
M&L for Vitrified ceramic tiles double charge/ultra charge 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured silicon to match bedded over and incl 15 mm thick screed bed in CM (1:6) complete all as specified and directed.
All as per item No.24 but as in skirting excluding screed bed and incl 10 mm thick backing coat in CM (1:4) complete all as specified and directed.
S&F coloured glazed ceramic tiles 450mm X 350mm X 7 to 8mm thick in vertical surfaces 7 to 8mm thick set and jointed in neat cement slurry and pointed in white/coloured silicon to match including backing coat 10mm thick in cement plaster 1:4 complete all as specified and as directed.
Non Skid ceramic tiles 7 to 8 mm thick, coloured (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured silicon to match bedded over and incl 15 mm thick screed bed in CM (1:6) complete all as specified and directed.
Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exc 1.50 sqm and n.exc 4.00 sqm each complete all as specified and directed.
S&F Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors/any door /window/ventilator; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc.complete all as specified and directed
Silicon sealant of 500 ml tube, complete all as specified and directed
S&F for 4.8 mm thick sheet glass odinary qulity and glazing with neosprene beading n.exc 0.5 Sqm in each pane etc.complete all as specified and directed
S&F stainless steel wire cloth 0.45mm nominal dia of wire and average width of operature 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.
Supply and fix Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.
2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed
S & F 40mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with sunmica lamination complete
S & F 35mm thick second class hardwood factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc divided into square , with plain, chamfered or rounded, mitred and rebated sash bars any numbers , fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- S & F Glass/gauge shall be measured and paid for separately
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum ompressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant etc.complete all as specified and directed
S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
S&F100mm size of stainless steel butt hinges, medium weight, cold rolled etc.complete all as specified and directed
S&F 150mm size Extruded brass handles, fabricated type polished etc.complete all as specified and directed
S&F 200mm size Brass barrel tower bolts of extruded section, with cast or sheet barrel and rolled or cast bolts and fix etc.complete all as specified and directed
S & F 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed etc.complete all as specified and directed
S & F 140 mm long Floor door stopper of brass body and tongue with hard drawn steel spring fixed in floor etc.complete all as specified and directed
S & F in repair 300mm, Brass ordinary rat tail rod pattern springs including roller and roller plate complete fixed to angle iron chowkats. as directed and specified.
M&L for preparation of wooden surfaces of any description, over 10cm in width or girth and applying varnish over filler,thin lacquer nd finishing coat with synthetic varnish complete all as specified and as directed
S&F PVC (SWR) pipes 75mm dia single socketed in length with rubber ring joints liad in trenches or in floors complete all as specified and as directed.
S&F PVC (SWR) pipes 110mm dia single socketed in length with rubber ring joints liad in trenches or in floors complete all as specified and as directed.
PVC (SWR) pipes 75mm single socketed in any length with rubber ring joints fixed to walls etc.complete all as specified and directed
PVC (SWR) pipes 110mm single socketed in any length with rubber ring joints fixed to walls etc.complete all as specified and directed
S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and as directed.
S&F 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.
S&F 75 mm dia PVC (SWR) bends any radius complete all as specified and as directed.
S&F 110 mm dia PVC (SWR) Gully trap any radius complete all as specified and as directed.
S&F in repairs PVC (SWR) floor trap oulet dia 110mm, plain with grating including jointing with solvent cemet complete all as specified and as directed.
S&F wall hung water closet with concealed flusing cistern with frame, seat cover and twin flushing fittings EWC, pneumatic faceplates in polished chrome including taking down old all as specified and directed by Engineer-in-charge (Make- Kubix prime series- Jaguar / Equivalent in Kohler)
S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified all as specified and directed by Engineer in charge (Make- Kubix prime series- Jaguar / Equivalent in Kohler)
S&F Toilet paper holder stainless steel with suitable fixing arrangements all as specified and directed by Engineer in charge (Make- Kubix prime series- Jaguar / Equivalent in Kohler)
S&F counter top wash basin with bottle trap connection all as specified and directed by engineer in charge ( Make- Kubix prime series- Jaguar / Equivalent in Kohler)
S&F brass cromium plated single lever basin mixer system 15mm bore dia all as specified and directed by engineer in charge. ( Make- Kubix prime series- Jaguar / Equivalent in Kohler)
S & F wall mixer CP hot & cold, 15mm bore for connection to overhead shower, with hand shower including flexible pipe bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.
S&F Brass chromium plated shower rose 150mm size including fixing to steel pipe or union etc.complete all as specified and directed
S&F towel rack, brass chromium plated, complete all as specified and as directed.
S& F Stainless steel peg stay six complete all as specified and as directed
S&F PVC Connections 15mm size 600mm long with PTMT nuts complete all as specified and as directed.
S&F Waste coupling 32mm bore for wash hand basin cast copper alloy complete all as specified and as directed.
S&F PVC (SWR) floor trap oulet dia 110mm, plain with grating including jointing with solvent cemet complete all as specified and as directed.
S&F in repair corner glass self large 300mmx300mm complete all as specified.
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long etc.complete all as specified and directed
S & F sink mixer CP hot & cold, 15mm bore with connection to, bright finish with screwed the ends for iron pipe and plugging complete all as specified and directed.
S&F 15mm bore dia stop valves cast copper alloy, fancy type cromium plated,screwed down high pressure with crutch as butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.
S&F angle valve 15mm dia bore chromium plated cast copper alloy with long shank and cup etc.complete all as specified and directed
S&F PVC waste pipe as in repair 32 mm dia having length of 450 mm complete all as specifieid.
S&F in repair 15mm bore bib tap two way,cast copper alloy chromium plated.fancy type with capston head,screwed down, screwed for iron pipe or for brass ferrule. Make Jaquar Cat Part No QQT -7041 or equivalent as approved by GE
S & F in repairs 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe pipe etc complete all as specified in SSR Part , IMake:Sintex, Polycon Aqua plast( ISI Marked)
M&L for 75 mm PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection & pavings finished even and smooth without using extra cement including necessary complete all as specified and directed.
Material and labour for 100mm Thick PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) complete all as specified and directed.
Material and labour for 50mm thick PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregate) complete all as specified and directed.
M&L for Chequered cement concrete tiles with mixture of white and grey cement in equal pro-portion and no pigment having size 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors set in cement mortar including providing 15mm thick screed bed in CM (1:6) as specified and directed by Engg-in-Charge.
Providing precast cement concrete louvers and jallies, 35 mm thick ( measured solid) including all mouldings but excluding frame type B-0 1:2:4 ( 12.5 mmgraded stone aggregate) set in CM 1: 4 complete all as directed by Engineer-in-charge
Dismantling boarding of any description fixed in any position with screws/nails complete all as specified.
S & F 18 mm thick HDHMR (High density high moisture resistant) board of 'Action Tesa' or equivalent one side white laminate and other side decorative as in almirah cabinets fixed with minifix hardware where ever required including edge band 22 mm wide 0.80 m thick (of REHAU or equivalent)of matching colour on exposed surfaces of board fixed with polymaster adhessive of REHAU make or equivalent including trimming edges of edge band to true line of thicknesss of board by manual trimmer complete all as directed
S & F 8 mm thick HDHMR (High density high moisture resistant) board of 'Action Tesa' or equivalent one side white laminate and other side un decorative as in back of almirah cabinets.
S & F auto close hinges , stainless steel of grade SS-304 , bright finish fixed complete all as specified (Make : Hettich or equivalent)
S & F stainless steel handles of size 100 mm fancy type of approved make complete all as specified & directed
M & L for cement Concrete in ground floors and pavings of any thickness (below or above ground level) etc.complete all as specified and directed
M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0,( 1.2.4) using 12.5 mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement measured & paid separately.
Supply only liquid water proofing compund
M&L rendering 10mm thick in cement mortar (1:3) on concrete surfaces to receive water proofing treatment finished even and fair complete all as specified.
M & L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) etc.complete all as specified and directed
M & L for Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 etc.complete all as specified and directed
M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified
S&F in repair 25 mm dia SS drapery rod grade 304 medium weight all as specified and as directed. Make Jindal or equivalent
S&F SS -304 grade brackets/ end brackets for holding drapery rod all as specified and as directed.
S&F SS Finials suitable for 25mm dia SS 304 grade drapery rod as approved etc.complete all as specified and directed
S&F in repair brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed
M & L for Surface excavation in soft lose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out as specified and directed by engg-in -Charge.
M & L for laying Hardcore of broken boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface as specified and directed by engg-in -Charge.
Removing excavated material not exc. 50m and depositing where directed at a level n exc. 1.5 mabove the starting point as specified and directed by engg-in -Charge.
M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates having Fe-290 (Gde E165) as specified and directed by engg-in -Charge.
M&L pre-painted galvalume aluminium zinc coating Gi based corrugated steel sheet 0.5mm thik of any colour having tensile strenght of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified
M&L for two coat of synthetic enamel paint (ordinary tint) to the new steel surfaces having shop coat primer red oxide (zinc chrome) over 10 cm in width or girth not otherwise described complete all as specified and directed.
M&L Precast stone heritage Chhatri upto height 700mm as specified and directed by engineer in charge
Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre etc.complete all as specified and directed
Seamless calcium silicate ceiling 12mm thick made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish etc.complete all as specified and directed. (Frame work for ceiling shall be measured and paid separately)
M & L for excavating in trenches in any type of soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out etc.complete all as specified and directed
M & L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as specified and directed by engineer-in-Charge
M&L for cement concrete type C-1, (1:3:6) (using 20mm graded crushed stone aggregate) as in coping,benching and haunching chamfered on edges complete all as specified and as directed.
M&L for cement concrete type D-2, (1:4:8) (using 40mm graded crushed stone aggregate) as in as in foundations, filling and mass concrete complete all as specified and as directed.
M & L for pre cast RCC 1:2:4 type B-1 using 20 mm graded stone aggregates as in cover slab for manhole and similar works supported on walls and set in cement mortar 1:4 complete.
Material & labour for mild steel CRS (Fe-500 D / 550 D) bars up to and including 10 mm dia cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends binding with MS wire annealed not less than 0.9mm dia complete
S&F 100mm thick (Minimum) precast cement concrete interlocking paving block (M-50) grade fixed in position incl necessary vibration etc complete with graycement and pigment, confirming to IS 15658-2006 and including 20mm sand filling under floor incl well ramming and watering and consolidations complete all as specified and as directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken modular GI metal boxes not less than 1.0 mm thick and white modular mounting cover plates with frame for mounting modular switches, sockets, fan regulators etc as required for the following:- (a) One light point controlled by one switch.
(b) One fan point controlled by one switch.
(c) One 3 pin socket outlet 6 amp controlled by one switch on the same board with other switches.
(d) One 3 pin socket outlet 6 amp controlled by one switch on indepdendent board.
(e) One bell point controlled by one bell push.
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken modular GI metal boxes not less than 1.0 mm thick and white modular mounting plates with frame for mounting modular switches, sockets as required for 3 pin 16 amps socket outlet point controlled by one switch.
M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes:- (a) 2x4 sqmm + 1x4 sqmm earth wire in 25 mm dia conduit.
(b) 2x6 sqmm + 1x6sqmm earth wire in 25 mm dia conduit.
S&F modular switch one way 6 amp 1 module all as per Legrand Mylinc cat ref no. 675501 or equivalent in Schneider Zencelo or Crabtree Murano as approved.
S&F modular switch one way 16 amp 1 module all as per Legrand Mylinc cat ref no. 675511 or equivalent in Schneider Zencelo or Crabtree Murano as approved.
S&F modular bell push, 6 amp, 1 module all as per Legrand Mylinc cat ref no. 675504 or equivalent in Schneider Zencelo or Crabtree Murano as approved.
S&F door bell, AC, 230 volts, single pole complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.
S&F modular socket 6/16A, 2/3 pin combined 2 module all as per Legrand Mylinc cat ref no. 675555 or equivalent in Schneider Zencelo or Crabtree Murano as approved.
S&F modular socket 6 amp 2/3 pin combined 2 module all as per Legrand Mylinc cat ref no. 675550 or equivalent in Schneider Zencelo or Crabtree Murano as approved.
S&F modular hum free electronic step fan regulator, 100 watt 2 module all as per Legrand cat ref no. 675530 or equivalent in Schneider Zencelo or Crabtree Murano as approved.
S&F angle holder, insulated polycarbonate body with back plate complete.
S&F ceiling rose 3 plates polycarbonate body complete.
S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with following ratings & ways:- (a) SPN, 240 volts, 8 ways. Make - Legrand cat ref no 507610 or equivalent in Schneider or Hager as approved.
S&F MCB distribution board, tripple pole and neutral (VTPN) powder coated CRCA steel sheet suitable for MCCB incomer upto 160 amp, 4 way, 415 volts, degree of protection IP 43 - IK- 09 with reversible double door, recess mounted, having 250 amp insulated tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required. Make- Legrand cat ref no 507745 or equivalent in Schneider or Hager as approved. Note for MCBs & MCB DBs:- MCCBs, MCBs & MCB DBs shall be of the same make.
S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:- (a) Single pole 10 to 32 amp.
(b) Double pole 10 to 32 amp.
(c ) Double pole 40 amp.
S&F Four pole 63 amp MCCB. Make - Legrand cat ref no 408700 to 408702 or equivalent inSchneider or Hager as approved.
S&F LED batten (1.2 m) made of CRCA sheet housing with a PC glossy difusser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 19 watt (including driver) having colour temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make - Philips cat ref no. ENDURALED "BN 308C- LED -20S- PSU-CDL- WH" or Cramption cat ref no. CIS-305-20-57-SL-PD- NWH or Havells cat no: 600-BS-20W-LED-840SP- C-WH make as approved.
Supplying and fixing in repair LED batten (0.6 m) made of CRCA sheet housing with a PC glossy difusser duly prewired connection having a nominal system lumen output of 900 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 9 watt (including driver) having colour temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete.
Supplying and fixing LED fancy wall warm light luminaire 10watt (including driver) having colour temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. complete with drive, including mounting arrangement ISI marked nuts, bolts, washeres as required.
S&F ceiling fan 1200mm sweep 50 Hz AC 230 votls, Motor BLDC 5 star rating, fan blade including 0.5 Sqmm three core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling as required.
S & F in repair exhaust fan made of sturdy Engineering plastic body 250 mm sweep 1400RPM heavy duty, motor copper wound ,AC single phase, 230 volts, double ball bearings with louver as IS standerd. Make Havells/CG/Bajaj
M& L for taking out ceiling fan 1200mm sweep 50 Hz AC 230 votls, and servicing, cleaning painting etc and re-fixing at new location including 0.5 Sqmm three core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling as required.
S&F 20 amp, single pole and neutral, socket outlet, with 2 pole and earth, metal enclosed plug top in power coated CRCA steel sheet enclosure recess mounted with chained metal cover for the socket outlet with and including one number single pole 'C' series MCB 16 amp as required. Make - Legrand cat ref no 607841 & 408592 or equivalent in Hager or Schneider as approved.
M & L for earthing complete using galvanised steel plate electrode 600X600X6mm size buried directly in ground to (earth pit not less than 2.25m below ground level) with top edge of the plate at a depth not less than 1.5m below normal ground level, surrounded with charcoal and common salt filling in alternate layers of 15Cm thick connected with galvanised wire 4 sqmm by means of nuts, bolts, washers etc and 20 mm dia GI pipe medium grade connected with funnel having wire mesh for watering purpose including necessary excavation and earth work PCC(1:2:4) type B1 for concrete pit cast iron cover with angle iron frame all as specified and shown in Electrical Plant No 5 of SSR part I of 1991 and testing on completion
S&F Steel tubes ISI marked light grade galvanised with all fittings fixed to walls / poles / laid in road crossing etc as required of 40 mm bore for laying existing PVC insulated cable and make good all disterbed surface as required at site and all as directed.
Less Schedule of Credit
M/S JALANDRA CONSTRUCTIONS (BID ID -3096807)
JAGDAMBA CONSTRUCTION COMPANY (BID ID -3091917)
UNIVERSAL INFRAPROJECT PVT LTD (BID ID -3075960)
MSR INFRATECH (BID ID -3080779)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .