Comprehensive Maint of internal electrification, ceiling fan, exhaust fan, re-wiring and allied works at 166 MH and Raipur Satwari under GE Satwari

Amount

Internal electrification complaints: "Receiving/recording complaints lodged by the occupants of area 166 MH and raipursatwari under GE Satwari of electrification nature, rectification of the fault / complaints as per the complaint lodged by the user or as given by MES onward KWH meter in respect of main distribution board having switch fuses, MCB distribution board in sheet metal enclosure, point wiring, fixture for light/ Fan/bell/light or power sockets complete repairs to the extent by removing connections from the system, removing faults in wires, batten, conduit, sunk boxes, junction boxes, main switches, MCBs/DBs utility light fittings, FTL light fitting any wattage lamp, holders, AC ceiling/exhaust fans and other connected fixtures of the internal electrification including providing of petty stores such as insulation wires of appropriate size and conductor matching to existing one upto the length of 1 mtr including insulation tape, screws, nuts as required to rectify the fault with regard to the complaint lodged and refixing of fittings, fixture to their position as dismantled complete all as directed at site to the entire satisfaction of Engineer-in-Charge/users.

NOTE: (i) The new items provided shall be measured and paid for separately under relevant items of Sch ‘A’. (ii) If contractor fails to attend the complaints in reasonable time a recovery of Rs 300 shall recovered per complaint. (iii) Contractor shall employee minimum of two electrician and two helper having adequate experience with ITI certification course in the said field.

Supply only Switch piano made of polycarbonate flush button single pole one way, 6 Amps, 240 V . Make: Havells/HPL/Anchor Penta Cherry White.

Supply only Switch piano flush button single pole two way 6 Amps, 240 V.Make: Havells/HPL/Anchor Penta Cherry White.

Supply only Bell push piano flush type 6 amps 240 V. Make: Havells/HPL/Anchor Penta Cherry White.

Supply only Buzzer Ding Dong AC 230 volts Single Phase.

Supply only Socket outlet 2-in-1 5 pin, 6 Amps flush type complete all as specified and as directed. Make: Havells/HPL/Anchor Penta Cherry White.

Supply only Switch socket combination 2-in-1 5 pin 6 Amps flush type complete all as specified and as directed.Make: Havells/HPL/ Anchor Penta Cherry White.

Supply only Switch piano flush button single pole one way 16 Amps ,230/240 V. Make: Havells/HPL/Anchor Penta Cherry White.

Supply only switch socket outlet 2-in-1 5 pin, 6 and 16 Amps flush type complete all as specified and directed. Make: Havells/HPL/ Anchor Penta Cherry White.

Supply only Switch socket combination 5 in 1, 6 and 16 Amps flush type universal controlled by one switch. Make: Havells/HPL/ Anchor Penta Cherry White.

Supply only Fan regulator socket type stepped type (electronic) for 1200/1400mm sweep AC ceiling fan.Make: Havells/HPL/ Anchor Penta Cherry White.

Supply only single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amp 240 Volts.

Supply only MCB single pole and neutral 32 Amp with rupturing capacity 10 KA 'B' series, complete all as specified and directed. Make:- IndoAsian Optipro or equivalent in Havells/C&S Electric/HPL.

Supply only MCB single pole and neutral 40 Amp with rupturing capacity 10 KA 'B' series, complete all as specified and directed. Make:- IndoAsian Optipro or equivalent in Havells/C&S Electric/HPL.

Supply only MCB single pole and neutral 63 Amp with rupturing capacity 10 KA 'B' series, complete all as specified and directed. Make:- IndoAsian Optipro or equivalent in Havells/C&S Electric/HPL

Supply only MCB single pole 6 to 32 Amp with rupturing capacity 10 KA 'B' series, complete all as specified and directed. Make:- IndoAsian Optipro or equivalent in Havells/C&S Electric.

Supply only MCB complete 40 Amp with rupturing capacity 10 KA 'B' series, complete all as specified and directed. Make:- IndoAsian Optipro Cat Part No 811130 or equivalent in Havells/C&S Electric.

Supply only MCB 4 pole complete 63 Amps with rupturing capacity 10 KA 'C' series, ISI Marked complete all as specified and directed. Make:- IndoAsian Optipro or equivalent in Havells/C&S Electric.

Supply only 8'' x 5'' size Laminated sheet cover hylam ISI marked 3mm thick including cutting of sheet for fixing switches/sockets as required at site incl suitable size screws - 04 Nos for fixing on existing MS sunken boxes complete all as specified and directed.

Supply only 5'' x 5'' size Laminated sheet cover hylam ISI marked 3mm thick including cutting of sheet for fixing switches/sockets as required at site incl suitable size screws - 04 Nos for fixing on existing MS sunken boxes complete all as specified and directed.

Supply only 12'' x 10'' size Laminated sheet cover hylam ISI marked 3mm thick including cutting of sheet for fixing switches/sockets as required at site incl suitable size screws - 04 Nos for fixing on existing MS sunken boxes complete all as specified and directed.

Supply only Laminated sheet cover hylam brand ISI marked 3mm thick round sheet for fixing on junction boxes as required at site incl suitable size screws - 01 Nos complete all as specified and directed.

Supply only LED tube light Polycarbonate with superior aesthetic and heat dissipation capability suitable for G-13 base tube lights base fluorescent T8/T12 luminaries, 18-20 watt LED wattage with colour temp of 6000 K 1800 lumens and with surge arrestor complete in all respect suitable for installation in existing T8 tubelight with G13 lamp holders to give glare free light 18 watt. Make: Model LHEXCEP7UN1W020 of Havells or Cat Part No LTT8-20 of Crompton or LL13-181-650 of Wipro.

Supply only LED tubelight Tube rod with aluminium heat sink and polycarbonate diffuser with high efficacy suitable for installation in existing T5 tube light with G5 lamp holders to give glare free light 18 watt along with LED driver. Make: Cropmton cat part No LT5RT1-18-CDL or equivalent in Wipro, Havells.

Supply only modular type switch, one way 6 Amps, 1 module complete all as specified and directed. Make: As per existing

Supply only modular type socket 5 pin, 6 Amps combined 2 module complete all as specified and directed. Make: As per existing

Supply only modular type socket 5 pin, 6 A/16 Amps combined 2 module complete all as specified and directed. Make: As per existing

Supply only for replacement of modular type switch, one way 16 Amps, 1 module complete all as specified and directed. Make: As per existing

Supply only Choke electronic ballast in ABS housing with lead in wires suitable for FTL fitting 1x40/36 watt 240 volts.Make : Havells/Crompton/Anchor/Surya.

Supply only Choke electronic ballast in ABS housing with lead in wires suitable for T5 FTL fitting 1x28 watt 240 volts. Make: Havells or equivalent in Crompton/Anchor/Surya.

Supply only FTL T5 28 watt suitable for existing 1 x 28 watt T5 fitting Make: Havells/Bajaj/Surya/Crompton

Supply only FTL T8 36 watt suitable for existing 1 x 36 watt T8 fitting Make: Havells/Bajaj/Surya/Crompton

Taking down carefully aluminium conductor point wiring (light, fan, light socket, power socket) complete fitting such as switches, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good disturbed surface of walls and roofs complete all as specified and as directed.

Material and labour for point wiring one light/fan point controlled by one, one way switch 6 Amp complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked terminated into CI/pressed steel modular terminal boxes including modular switch cover IS marked for mounting switches, sockets, fan regulators etc complete all as specified and as directed.

Description all as per srl item No 35 here-in-before but one 3 pin modular socket outlet 6 amp independent.

Description all as per srl item No 35 here-in-before but one 3 pin modular socket outlet 6 amp same board.

Description all as per srl item No 35 here-in-before but one 3 pin 6 amps modular socket outlet independent but below the switch board of light points in the same vertical plane,

Description all as per srl item No 35 here-in-before but one bell/ buzzer point controlled by one switch, complete all as specified and directed.

Description all as per srl item No 35 here-in-before but for one 2 way light point controlled by two 2 way switch complete all as specified and directed.

Description all as per srl item No 35 here-in-before but for one 3 pin modular socket outlet 15 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire complete all as specified and directed.

Supply and fixing switch modular type, one way one module 6 Amps, 1 module complete all as specified and directed.

Supply and fixing switch modular type, one way one module 16 Amps, 1 module, complete all as specified and directed.

Supply and fixing modular socket 6 Amps 2/3Pin combined, 2 module, 230Volts AC all as specified and directed.

Supply and fixing modular socket 6/16 Amps 3/6 Pin combined, 2 module, 230Volts AC all as specified and directed.

Supply and fixing Bell push type one way 5/6 Amps all as specified and directed.

Supply and fixing Fan regulator 2 Module all as specified and directed.

Material and labour for point wiring one light/fan point controlled by one, one way switch 6 Amp complete with 1.5 Sqmm single core multi stranded copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm multi stranded copper conductor FRLS insulated drawn in existing concealed PVC/MS rigid conduit of any size terminated in exisitng CI/pressed steel terminal boxes including 3.00 mm thick hylam marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed.

Description all as per srl item No 48 here-in-before but one 3 pin socket outlet 6 amp independent

Description all as per srl item No 48 here-in-before but one 3 pin socket outlet 6 amp on same board.

Description all as per srl item No 48 here-in-before but one bell/ buzzer point controlled by one switch complete all as specified and directed.

Description all as per srl item No 48 here-in-before but for one 2 way light point controlled by two 2 way switch.

Description all as per srl item No 48 here-in-before but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 sqmm for point wiring and 2.5 Sqmm as in continuous earth wire.

Material and labour for point wiring one light/fan point controlled by one, one way switch 6 Amp complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated drawn in surface PVC casing and caping /PVC conduit of suitable size terminated into PVC box ISI marked for mounting switches, sockets, fan regulators etc complete all as specified and as directed.

Supply and fixing Switch piano made of polycarbonate flush button single pole one way, 6 Amps, 240 V.

Supply and fixing Switch piano made of Polycarbonate flush button single pole two way 6 Amps, 240 V.

Supply and fixing push piano made of polycarbonate piano flush type 6 amps , 240 V. Make: Anchor PC Penta Cherry or equivalent in HPL/Havells

Supply and fixing Buzzer Ding Dong, AC 230 volts Single Phase all as specified and directed. Make: Havell's/HPL/Anchor.

Supply and fixing socket outlet 2-in-1 5 pin, 6 Amps made of polycarbonate flush type complete all as specified and as directed. Make: Anchor PC Penta or equivalent in Havells/HPL.

Supply and fixing switch socket outlet 2-in-1 5 pin 16 Amps made of polycarbonate flush type complete all as specified and as directed.Make: Anchor PC Penta or equivalent in Havells/HPL.

Supply and fix Fan regulator socket type stepped type (electronic) polycarbonate for AC ceiling fan all as specified and directed.. Make: Anchor Penta Cherry White or equivalent in Havells/ HPL.

Supply and fixing ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed. Make: Anchor Penta Cherry White or equivalent in Havells/ HPL.

Supply and fixing of lamp holder, PVC /Polycarbonate type with back plate for batten fittings all as specified and directed. Make: Anchor Penta or equivalent in Havells/HPL.

Supply LED tubelight fitting 18-20 W LED, 230V, batten type complete in all respect. Cat part No DMLN1LT8-16 in Crompton or Cat Part No WIO921208 of Wipro, along with LED Tube Rod Polycarbonate with superior aesthetic and heat dissipation capability suitable for G-13 base tube lights base fluorescent T8-T12 luminaire, 18-20 watt LED wattage with colour temp of 6000K 1800 lumens and with surge arrestor complete in all respect Cat part NO LTT 8-20 of Crompton or LL13-181-650 of Wipro, or its equivalent in Havells. Note : The LED batten and LED tube rod shall be of same make.

Supply and fixing LED wall mounted tube light fitting 10W complete all as specified and directed. Make Wipro cat part No LL20-111-XXX-65-NE, or equivalent in Havells/Crompton

Supply and fixing energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed. Make : Havells Cat part No LHEOAOP7UZ6W010 or equivalent in Crompton/Philips/Wipro

S&F LED ceiling light fitting recess mounting 2'X2' white powder coated CRCA housing with LED's seamless front frame with flat white high transmission acrylic cover complete all as specified and directed.

Supply and fixing MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed.Make:- IndoAsian Optipro or equivalent in Havells/C&S Electgric/HPL.

Supply and fixing MCB SPN complete 40 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed.Make:- IndoAsian Optipro or equivalent in Havells/C&S Electgric/HPL.

Supply and fixing MCB SPN complete 63 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed.Make:- IndoAsian Optipro or equivalent in Havells/C&S Electgric/HPL.

Supply and fixing MCB single pole 6 to 32 Amp with rupturing capacity 10 KA 'B' series, complete all as specified and directed. Make:- IndoAsian Optipro or equivalent in Havells/ C&S Electric.

Supply and fixing MCB single pole complete 40 Amps with rupturing capacity 10 KA 'B' series, complete all as specified and directed. Make:- IndoAsian Optipro or equivalent in Havells/ C&S Electric.

Supply and fixing MCB single pole complete 63 Amps with rupturing capacity 10 KA 'B' series, complete all as specified and directed. Make:- IndoAsian Optipro or equivalent in Havells/ C&S Electric.

Supply and fixing of MCB 4 pole, 40 Amps with rupturing capacity 10 KA 'B' series complete all as specified and directed. Make: IndoAsian Optipro,Havells/ Legrand

Supply and fixing high efficiency LED panel of size 2'x2', 36 watt in combination with profiled and flat diffuser suitable for fixing in existing 2'X2' grid ceiling incl its necessary connection all as specifed & directed. Make: Philips Cat No: SM365C LED33-6500 PSU-OD GR or equivalent in Havells, Crompton.

Supply and fixing high efficiency LED compact lamp 18 watt 4 pin suitable for fixing in existing recesses fitting 2'X2'. Make: Wipro cat part No LL18-181-65PL or equivalent in Havells, Crompton.

Supply and fixing in replacement down lighter fitting with LED light fitting 18 W LED 6000K, 230 V suitable for Recess mounted downlighter with pressure die-cast Al. heat sink & high brightness LED, with diffuser to give glare free light suitable for existing ceiling cutout Ø 160 mm complete all as specified and as directed. MakeCG cat part No LSCRM-18W-CDL/NW/WW or equivelent Make /C&S/Havells/wipro.

Supply and fixing in replacement down lighter fitting with LED light fitting 15 W LED 6000K, 230 V suitable for Recess mounted downlighter with pressure die-cast Al. heat sink & high brightness LED, with diffuser to give glare free light suitable for existing ceiling cutout Ø 160 mm complete all as specified and as directed. MakeCG cat part No LSCRM-15W-CDL/NW/WW or equivelent Make /C&S/Havells/wipro

M&L for replacement of RCBO, double pole with sensitivity 100 mA of cap 63 Amp, having rupturing capacity 10 KA, 'C' series. Make: As per existing

Supply and fixing Vertical Distribution Board (TP&N), double door suitable for and including Four pole MCCB 100 Amps as incomer and outgoing MCBs 4 ways and should be IP 43 protected with Copper insulated Bus Bar assembly, Isolated Neutral Bar, Earthing bar all as specified and directed including taking down old UNSV DB/MCB any type. Make: Legrand/IndoAsian Optipro/Schnider Note: (i) Rate includes MCCB 4 pole 100 Amp, 16KA, 415 V with adjustable thermal settings. (ii) TPN DB and MCCB shoould be of same make.

Supply and fixing distribution board (TP&N) double door fitted with Bus bars neutral links blanking plates suitable for 4 pole MCB as incoming and out going MCBs 4 ways and should be IP 43 protected with Copper insulated busbar assembly, Isolated Neutral Bar, Earthig Bar, Door earthing complete all as specified and directed. Make:- Havells/IndoAsian optiopro Makes: Havells/IndoAsian Optipro/C & S Electric Note:-(i) Rate includes Isolator four pole 63 Amp. (ii) TPN DB and Isolator should be of same make.

Supply and fixing Distribution Board (SPN) double door 12 Way and should be IP 43 protected with Copper Bus bar, Earth Bar ,neutral Bar Door Earthing .Makes: Havells/Indo Asian Optipro/C&S.

Supply and fixing Distribution Board (SPN) double door 8 Way and should be IP 43 protected with Copper Bus bar, Earth Bar ,neutral Bar Door Earthing .Makes: Havells/Indo Asian Optipro/C&S.

Supply and fixing Distribution Board (SPN) double door 4 Way and should be IP 43 protected with Copper Bus bar, Earth Bar ,neutral Bar Door Earthing .Makes: Havells/Indo Asian Optipro/C&S.

Supply and fixing distribution board single door two way without bus bar complete suitable for mounting MCB all as specified and directed. Make: IndoAsian/Havells/C&S

Supply and fixing socket residual current device (SRCD) DBOXx in steel enclosure with MCB SPN 16 Amp and plug top 15/16 Amp complete all as specified and directed. Cat No:DHDDCDP025201603 Make Havells/C&S, Hegar.

M&L point wiring with 4.0 Sqmm (Cross sectional area) single core PVC insulated unsheathed multistranded copper conductor FRLS in and including PVC concealed conduit and sunk type mild steel terminal switch box of any size for mounting of switches/sockets etc with 3mm thick plastic laminated sheet top cover with brass screws and cup washers and all other accessories, including 2.5 Sqmm PVC insulated unsheathed copper conductor FRLS earth wire to common earth and connected to earth dolly complete all as specified and directed.

Supply and fixing sub main wiring with single core cable 3 x 10 sq mm FRLS insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x6 Sqmm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.

Supply and fixing sub main wiring with single core cable 2 x 10 sq mm FRLS insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x6 Sqmm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.

Supply and fixing sub main wiring with single core cable 2x 6 sq mm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x4 Sq mm FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.

Description all as per Item No 90 here-in-before but of size 2 x 4 Sqmm with earth wire 1x2.5 Sqmm drawn through existing PVC/steel Surface/Concealed conduit all as specified and directed.

Supply and fixing 1100 volt grade heavy duty cable PVC insulated multistranded aluminum conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat or circular of size 6 Sqmm incl taking down old service connection and removing from the side complete all as specified and as directed. Make:- Havell's/ CCI/Poly Cab/Finolex

Description all as per ser item No 92 here-in-before but 10 sqmm twin core service wire.

Description all as per ser item No 92 here-in-before but 16 sqmm twin core service wire.

Material and labour for replacement of CFL 11 W with 2 pin with G23 base suitable for ceiling light 2 x 11 watt. Make: Bajaj/CG/Philips

Supply and fixing LED Building security light 45 Watt, IP66 with fitting arrangement (GI pipe bracket of reqd length and dia, MS Clamp, Nuts, Bolts & washer) with high power pressure die cast aluminium housing complete with all accessories. Make: Crompton cat part No LSTP-45-CDL or equivalent in Havells/C & S

Supply and fixing LED security light 30 Watt, IP66 with (GI pipe bracket of reqd length and dia, MS Clamp, Nuts, Bolts & washer) with high power pressure die cast aluminium housing complete with all accessories. Make: Crompton cat part No LSTS-30 CDL or equivalent in Havells/ C& S

Supply and fixing building flood light LED type 80 watt, IP66 with high power LED floodlight with pressure die cast aluminium housing complete with all accessories. Make: Crompton cat part No LHNR-80-CDL or equivalent in Havells/ C &S /Philips Note:Rate shall be inclusive with GI bracket of appropriate size from length and size including connection wire of appropriate size from main source to light fitting with street light/Flood light (Item No. 96 to 98)

Taking down carefully AC ceiling fan 1200mm/1400mm sweep, complete in situ at site for servicing such as removing dust & dirt brushing, rubbing with cotton waste, , washing with detergent powder to fan blades, greasing bearing with ball bearing grease & washer packing, checking of bolts/nuts, washer check nuts split pin rubber packing and rubber seal etc and including providing and replacing any item found damaged/unserviceable i,e split pin screw for blades, body & reel capacitor of appropriate capacity, PVC connector, MS galvanised check nut, rubber pads, steel strip clamps, etc to put the fan for smooth and satisfactory working, refixing the fan, motor after executing necessary servicing to their positions, connecting to electric system and testing complete all as specified and as directed by Engr-in-Charge. (Note: Capacitor, PVC connector, MS galvanised check nut, rubber pads, steel strip/PVC condencer clamps if any item replaced, shall be measured separately under respective items.

Description all as per srl item No 99 here-in-before but for AC exhaust fan/Bkt Fan of size 300mm to 450mm sweep.

Material and labour for Rewinding of AC ceiling fan single phase 230 volts, 50 c/s 1200mm/1400mm sweep, any make and type with appropriate gauge super enamelled copper winding wire with allied insulation winding material, varnishing with air drying insulation varnish including fixing of any item found damaged/unserviceable i.e capacitor of appropriate capacity, PVC connector, MS galvanised check nut, rubber pads, PVC strip steel clamps and testing complete after rewinding and assembling Note: Capacitor, PVC connector, MS galvanised check nut, rubber pads, PVC strip clamps, if any replaced, shall be measured separately under respective items.

Description all as per srl item No 101 here-in-before but for Exhaust fan of 1400 mm sweep.

Description all as per Srl item No 101 here-in before but for AC exhaust fan of size 300mm sweep complete all as specified.

Description all as per Srl item No 101 here-in-before but for AC exhaust fan of size 380mm sweep complete all as specified.

Description all as per Srl item No 101 here-in-before but for AC exhaust fan upto of size 450mm sweep complete all as specified.

Description all as per srl item No 101 here-in-before but for bracket/cabin fan of size upto 400mm sweep AC 230/240 volts.

Description all as per srl item No 101 here-inb-efore but for bracket/cabin fan/Pedestral Fan of size of size 450mm sweep.

Supply and fixing ball bearing suitable for AC ceiling fan 1200/1400mm sweep to replace the unserviceable ball bearing of fan motor complete all as specified and directed.

Description all as per srl item No 108 here-in-before but for AC exhaust fan/Bkt Fan/Pedestral fan of size 300 to 380mm sweep.

Description all as per srl item No 108 here-in-before but for AC exhaust fan/Bkt Fan/Pedestral fan of size 400 to 450mm sweep.

Supply and fixing Gun metal bush of any type as suitable for ceiling fans 1200 & 1400mm sweep, exhaust fans of any make and size complete all as specified and as directed.

Supply and fixing Capacitor 2.5 mfd ±5%, 230/240 volts AC, 50 Hz all as specified and as directed.

Supply and fixing Capacitor 3.15 mfd ± 5%, 230/240 volts AC, 50 Hz all as specified and as directed.

Supply and fixing PVC/Porcelain conductor 02 pole, 02 way heavy duty with fixing screws for any make & size of fans as approved by Engr-in-Charge.

Supply and fixing rubber pads for packing capacitors of AC ceiling fan in down rod bracket suitable for fan of any size and make, as approved by Engr-in-Charge.

Supply and fixing steel strip clamps with screw for holding capacitor of ceiling fan exhaust fans and air circulation fan complete all as specified and as directed by the Engr-in-charge.

M & L for electric cable PVC insulated with copper conductor (flexible cable) twin core for connecting fan to electric system, complete all as specified & directed.

M & L for M.S socket heavy duty with split pin, locking screw to couple down rod and ceiling fan motor 1200/1400 mm sweep complete all as spfd & directed.

Supply and fixing fan blades made of aluminium material for AC ceiling fans 1200mm as per sample including fixing screw and washer complete suitable for fans of old model all as directed and specified by the Engr -in-charge.

Description all as per ser item No 119 here-in-before but for ceiling fan of size 1400mm sweep all as directed and specified by the Engr-in-charge.

Material and labour for Spray painting to AC ceiling fan 1200/1400mm sweep any make complete to motor assy, down rods, blades with ISI marked white synthetic enamel paint as approved by Engr-in-Charge after preparation of surface including filling cavities with filler & writing MES No as per sample provided complete all as directed by Engr-in-Charge.

Description all as per item No 121 here-in-before but for exhaust fan exceeding 300mm and upto 450mm.

M & L for Canopies for AC ceiling fan of size 1200/1400mm sweep for any make of fan.

Supply and fixing of hanging clamp suitable for ceiling fan of size 1200/1400mm of any make complete with nuts, bolts, rubber reel and locking pin complete all as directed by Engr-in-Charge.

Supply and fixing down rod (hanging rod) made of GI tubing 20mm bore for length upto 120cm suitable for AC ceiling fan of size 1200mm /1400mm sweep including provision of hole for fixing of nut and bolt all as specified.

Supply and fixing down rod (hanging rod) made of GI tubing 20mm bore for length upto 90cm suitable for AC ceiling fan of size 1200mm /1400mm sweep including provision of hole for fixing of nut and bolt all as specified.

Supply and fixing of louvers made of GI sheet suitable for exhaust fan 300 mm to 380 mm Sweep.

Supply and fixing of louvers made of GI sheet suitable for exhaust fan 450 mm Sweep.

Supply & fixing AC single phase 240 Volt 50 Hz ceiling fan of size 1200 mm sweep complete in white colour 5 star rating with canopy and hanging rod with all accessories incl nuts,bolts,clamps etc, complete all as specified and directed.

Supply only PVC insulation tape 20mm width, 0.3mm thickness and 10 mtr long complete in rolls Make : Kinjal/Anchor/steel grip.

LAL CONSTRUCTIONS

M/S S K Electricals Regd