PROVISION OF MULTIPURPOSE SHED FOR SML AND MT CLASSES FOR AGNIVEER TRAINEES AT ARMY AD CENTRE UNDER GE I GOPALPUR ON SEA

Amount

Surface excavation n.exc 30 cm deep and getting out in Soft/loose soil.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in Soft/loose soil.

Excavation in trenches not exceeding 1.5m wide andadditional 1.5 m or part thereof in depth beyond the first 1.5 m and getting out in Soft/loose soil.

M & L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified.

M&L for RCC, M-30 Design Mix (using 20mm graded aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed

Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

M&L for RCC, M-30 Design Mix (using 20mm graded aggregate) as in Columns,pillars,piers,posts and struts etc complete all as specified and directed.

Formwork to Square,rectangular or polygonal rough surface of concrete of sides of pillars, posts, struts, piers, columns and stanchions

M&L for RCC, M-30 Design Mix (using 20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M&L for RCC, M-30 Design Mix (using 20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L for Moorum / Red bajri filling in floors or pavings, laid in layers n.exc15 cm thick spread levelled and rammed incl watering etcall as specified & directed.

Returning, filling in of soft/loose soil including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing surplus excavated earth (soil) to a distance n. exc 50 m & Depositing where directed at a level n. exc 1.5 m above the starting point.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete

S&F Mild steel TMT bars 8mm dia and over, cut to length, spacers and binders and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L brick work with fly ash bricks, Straight or curved onplan exc 6m mean radius,built in 1:6 in cement mortar all as Specified and Directed

M&L for rendering 15mm thick in CM 1:6 on brick or concrete surface, finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface, finishing even and smooth without using extra cement but using waqter proofing compound @3% by wt of cement complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling finishing even and smooth without using extra cement complete all as specified and directed.

Supply only Integral water proofing compound

M&L for preparation and applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete.

M&L for Preparation of newly plastered surfaces of wall and applying 2 coat of Cement based paint complete all as specified and directed.

M&L two coats of white wash on new plastered ceiling surface including preparation of surfaces.

M&L Hard core of gauge n.exc 63 mm, deposited, spread, levelled in layers not exc 15 cm thick, watered and well rammed to a true surface.

M & L Cement concrete type D-2, 1:4:8 using 40 mm graded crushed stone aggreates 100 mm thick as in flooring finished even and fair complete all as specified and directed.

M & L 50 mm thick Cement concrete type B-1, 1:2:4 using 20 mm graded crushed stone aggreates as in flooring finished even and fair complete all as specified and directed.

M&L for Machine cut kota stone slab flooring mirror finished 18-20 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 20 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 20-25 mm thick over cement base rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 15 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6, type C-1 using 20 mm graded stone aggregate as in plinth protection, surfaces finished even and smooth with out using extra cement all as specified.(Note- Joint 12 mm wide to the full depth of pcc shall be provided at every 3 metres and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. cost of this provision shall be deemed to be included in the quated rate for concrete in plinth protection

M & L for water proofing treatment for roof slabs including crumple joints by applying bitumen primer @ 0.3 ltr/sqm then applying bot blown 85/25 @ 1.20kg/sqm and laying APP modified bituminous 3mm thick with non oven polyester core water proofing membrane laid and bonded to the sub-strata by heat process, over lap shall be sealed by flame torch application not less than 3.2kg/sqm with over lap of 100mm and end lap of 150 mm and APP membrane shall be covered with bituminous based aluminium paint @0.2kg/sqm on top complete all as specified and directed.

S&F Powder coated Aluminium sliding glazed windows with three track and three shutter sliding with following specifications and making good the adjacent surfaces complete all as specified and directed. (a) Window frame of Cross section 101 mm x44 mm x 1.5mm thick (b) Three way track for sliding shutters of Cross section 91.8 mm x31.8 mm x1.1 mm thick. (c) Sliding shutters frame of Cross section 40 mm x18 mm x1.1 mm thick (d) 5.5 mm thick tinted glass of approved make (e) IDPE rubber gasket for fixing of glass. (f) Locking cleats per shutter-01 Nos. (g) Sliding rollers per shutter-01 Nos. (h) Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.56mm for shutters-01 Nos (i) Fixing screws for frame with wall per window-08 Nos

S&F 5 mm thick aluminium grills of god quality surrounded by aluminium 'C' channel with mesh size 75 X 75mm complete all as specified and directed.

S&F for Plain, galvanised, mild steel sheeting 0.80 mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 incl welding complete all as specified and directed

S&F Framed work of Fe-410 W(Grade-E250, quality A) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

S&F Stainless steel SS-304 grade roller of dia suitable for fixing on bottom and top rail incl connection to the sheeting complete all as specified and directed

M&L preparation of new surfaces of steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Material and labour for One light point controlled by one 10amps switch, one way; point wiring complete with 1.5 sqmm, PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990(as amended) unsheathed, multistranded, single core, copper conductor cable 1100 volts grade using approved colour coding drawn through and including PVC concealed/surface conduit 20/25 mm dia medium grade (MMS) and incliding all accessories such as bend,tee,elbows,reducers,bell mouth tube ends,short pieces & junction boxes with PVC covers etc in walls / roofs / floors / ceiling etc and including cutting, chasing work at any height with flush mounting GI sunken/PVC boxes having top,bottom,side/back side knockout for conduit entry from any direction made out of 1.60mm thick, 60mm deep for housing modular switches,sockets,fan regulators, Indicators,blank plate etc and incl Providing modular white cover plate with inner frame suitable as per switch modules and including PVC insulated multistranded copper conductor 1.5 sqmm FRLSH type unsheathed (Green colour),single core cable as earth wire connecting to common earth dolly for further connection to ceiling rose and earth terminal and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed. Make :- (1).PVC Copper conductor cable FRLSH type :-Finolex / Havells / RR Kabel / Polycab (2) PVC conduit (MMS)/PVC Casing & Caping & Accessories ISI Marked :-Presto Plast/Finolex/Kalinga Gold/Plaza/AKG Plastics Pvt Ltd

All as per item No.40 above, but one fan/exhaust fan point controlled by one switch 10 amps, and one regulator.

All as per item No.40 above, but one 5 pin 6 amps socket point controlled by one 10 amps switch on independent board .

All as per item No.40 above, but one 5 pin 10 amps socket point controlled by one 10 amps switch on same board .

All as per item No.41 & 42 above, but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm for one 6 pin 16/20amps socket outlet point controlled by one 16/20 amps switch on independent board.complete all as specified and directed

All as per item No.41 & 42 above,vbut point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm for one 6 pin 16/20 amps socket outlet point controlled by one 16/20 amps switch on same board.

All as per item No.41 above , but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed.

Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, with ISI Marked complete all as specified and directed. Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing modular type switch 16/20 Amps, single pole,1way,1 module,240V,with ,AC, ISI Marked complete all as specified and directed. Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing modular type socket shuttered type 10 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed. Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed. Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing red color lighting indication lamp switch, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed. Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 1 to 8 steps, ISI Marked complete all as specified and directed. Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fix angle lamp holder latest model, insulated PVC out side body and brass inside holder with back plate for batten fittings/bulbs complete all as specified and directed. Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fix 20 watt LED light fitting pride essential bright linea white lighting, high quality materials and slim intergrated design,extruded aluminium housing enhances safety, PC diffuser, reliable and robust housing structure ,maximize the endurance over the life time, easy to install, efficency 100 lm/w and including providing coloured end caps, pre-wired, and PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose terminal and complete all as specified and directed. Make :- Havells ordering code.LHEXAWP7IN1W020 or equivalent make in Crompton/Philips

Supply and fix LED secruity light fitting of capacity 60 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and complete all as specified and directed.Make:- Crompton cat ref No.LSTS-40-CDL-M or equivalent make in Havells / Philips as approved

Supply and fixed in repairs LED floof light light fitting of capacity 100 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5/10 KV inbuilt surge protector and cable connection from looping box to light fitting and testing complete all as specified and directed.Make:-Havells Cat NO.LHEECNP7PB7J100 or equivalent in approved make

S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired of luminaires including LED light driver and connected with LED fitting to ceiling rose terminal and complete all as specified and directed. Make :-Havells Cat No. LHFHDPE1TN1K020 or equivalent make in Crompton/Philips

Supply & fixing and sheet metal enclosure with acrylic door type, double door ,415 volts AC,VTPN DB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43&54 DBs protection grouted in wall with PCC1:2:4 type B1 using 20mm graded stone agregate and including removing old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.Make:-Legrand Cat No.5077 30 4 way or equivalent make in ABB/Havells

Supply & fixing and sheet metal enclosure with acrylic door type, double door ,415 volts AC,TPN DB, 12 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43&54 DBs protection and complete all as specified and as directed.Make:-Legrand Cat No.5077 30 4 way or equivalent make in ABB/Havells

Supply & fix and sheet metal enclosure, with acrylic type double door, 240 volts AC,SPN,DB, 4 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. Make:-Legrand Cat No.5076 20 4 way or equivalent in Hagar/Schneider

Supply and fix MCCB, 160 Amps,4 pole,415 Volts , 36KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washers and including removing old unserviceable item complete all as specified and as directed. Make:- Legrand / Hager/ Havells or as equivalent approved

Supply & fix MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/ABB/Havells or as approved make

Supply & fix and MCB SPN 32 to 40 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply & fix and MCB TPN 63 Amps 10 KA,"C" series,AC,415Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

M & L for sub main wiring complete in repairs with 2 run of 10 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn drawn through and including PVC conduit in concealed ISI marked medium grade(MMS) accessories such as Tee,corner, overlaping connector etc and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC coduit shall be measured as one unit.

M & L for sub main wiring complete with 2 run of 1.5 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 1.5 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 1.5 sqmm single core copper conductor cable and one run of 1.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

Taking down old unserviceable ceiling fan of any type/size from existing location and deposit in MES store yard and Supply and fix ceiling fan of size 1200 mm sweep,high speed, single phase, 240Volts,AC, 50Hz, BEE not lessthen 5 star rated as approved colour and including hanging GI hook with necessary connecting accessories and testing complete all as specified and directed.Make:-Havells( ES-50) or equivalent in Orient/Kaithan as approved make

Taking down old unserviceable air circulators fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix air circulator heavy duty,metal body type standing fan 230Volts single phase oscillating 600 mm sweep and all connected accessories and including providing hanging heavy duty GI plate/clamp, nuts, bolts and washers complete all as specified and directed.Make:- Almonard/Havells/Usha/Crompton/Polar

S & F of ceiling fan MS/GI clamps nut & bolt and rubber bush of suitable size complete specified & directed.

Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC/(PVC hevy duty cover) cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value complete all as specified and directed.

Supply and fix GI bracket pipe of size 32 mm dia medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirement with hot or cold bending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including providing suitable fabricate galvanised flat iron clamps of 30X6 mm thick -02 Nos suitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc complete all as specified and directed.Make of GI pipe:- Jinadal/Tata/Surya Prakash

Material and labour for PVC insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 25 sqmm ,4.0 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testing and including removing old unsv UG cables complete all as specified and directed.

Material and labour for PVC insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 6 sqmm ,2 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testing and including removing old unsv UG cables complete all as specified and directed.

Boaring holes horizontally under road without damaging the surface of road (minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of any dia not exc 80mm dia for passing of UG cable all as specified and as directed.

Supply and providing river sand for cushioning with dry clean sand 15 cm below cable and 8 cm above the under ground cables and necessary fillings in the trenches and punning to provide required cover complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

M & L for brick sub class 'B' 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cable complete all as specified and directed.

Material & labour for GI pipe 50 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.Make:- Jindal/Tata/swastik/BST

Supply and fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;1.0 sqmm and including electric connection from ceiling fan to ceiling rose complete all as specified and directed. Make:-Havells/Finolex/Polycab

Material and labour for cutting chasing,pinning of brick/ stone/concrete wall at any height wall cutting and chases for concealed wiring for 20/25 mm PVC conduit dia pipe,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landigs,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed

S&F for PVC non-metalic rigid conduit incl boxes,junctions boxes 1 to 4 way & terminals but incl of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers lock nuts,saddles,pipes hookes etc ISI marked heavy duty of size 20/25 mm dia for LAN,telephone and TV connections cablesincluding cutting,chasses and making good disturbed surfaces to match with existing surfaces with plaster/putty and including removing of old unserviceable item complete all as specified and directed.

Supply and fix aluminium busbar chamber in sheet steel enclosure of current rating capacity 400 amps,4 way,415 volts with necessary fixing arrangements such as hole fastners/screws, bolts,nuts and washers etc and including removing old unserviceable item from existing loaction and making good the distrubed surface area and complete all as specified and as directed. Make:- Havells/Standard/Indo Asian/Hager as approved

V.Venkata Ramaiah

M/s Ats Electricals

DHABALESWAR ENGINEERING WORKS

M/S SIWALIK AND CO

M/S JAGANNATH SASMAL

M/S S.K GHOSE

R K Traders