8381-REPAIR AND REPLACEMENT OF JOINERY, PLUMBING, SANITARY FITTINGS AND CONNECTED WORKS AND REPAIRS TO ROOF TREATMENT OF CERTAIN BUILDINGS AND MISC WORKS AT INSIDE AND OUTSIDE AT OTA CHENNAI UNDER GE STM

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) exc. 1.5 Sqm but n. exc 4 Sqm each including making good disturbed surfaces all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from frames) n exc. 1.5 Sqm each including making good disturbed surfaces all as specified.

Taking down shutters of any description n exc 1 Sqm each all as specified.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each all as specified.

M&L for Solid PVC Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing in SSR Note:- i) Existing wall edges will have to be finished properly in cement plaster 1:4 including fixing of 6 Nos wooden plugs for catch door frame size not exc 17Sqcm average sectional areas and 100mm long. (ii) Frame will have to be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS screw, 3 each on either side. (iii) PCC strip of section 5*5mm will have to be created at bottom incl smooth finish in each door opening.

M&L forFactory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing in SSR

M&L for Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints supplied and fixed.

M&L for Factory Made 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

M&L for Second class hardwood 35 mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats.

M&L for Second class hardwood 35 mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc., without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and supplied and fitted to chowkats.

M&L for Second class hardwood 30mm thick glazed and skeleton window/vent shutters, open rebated and prepared to receive glass, gauze etc., without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b) and supplied and fitted to chowkats.

S&F Sheet glass 4mm thick ordinary quality and glazing with 12mm square beading in squares n.exc 0.5 Sq.m in each pane.

M&L for MS work as for hold fasts conforming to Fe 290 Gde-E -165

M&L for Preparation of surface of steel and iron such as hold fasts of area n.exc 0.10 Sq.m each new or old of any description and girth not otherwise treated with tar or coal tar black paint .

M&L for Preparing surfaces of wood and wood based materials new or old of chowkats area tarred exc 0.1 Sqm but n.exc 0.5 Sqm each and treated with tar or coal tar black paint.

S&F Butt hinges 100mm, cold rolled mild steel, medium weight.

S&F in repairs Butt hinges 100mm , cold rolled mild steel, medium weight.

S&F Butt hinges 100 mm, stainless steel hinges fixed with stainless steel screw with frame

S&F Butt hinges 75 mm, stainless steel hinges fixed with stainless steel screw with frame

S&F in repairs Butt hinges 75 mm, stainless steel hinges fixed with stainless steel screw with frame

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm size

S&F in repairs Aluminium anodised barrel tower bolts of extruded section 200 mm size

S&F Aluminium anodised barrel tower bolts of extruded section 125 mm size

S&F in repairs Aluminium anodised barrel tower bolts of extruded section 125 mm size

S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm long

S&F in repairs Extruded aluminium alloy handles, fabricated type, anodised 150 mm long

S&F Extruded aluminium alloy handles, fabricated type, anodised 125 mm long

S&F in repairs Extruded aluminium alloy handles, fabricated type, anodised 125 mm long

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed.

S&F in repairs 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.5 Sqm.

S&F Sheet glass 5.5 mm thick ordinary quality and glazing with 12 mm square beading in squares exc 0.5 Sq.m in each pane.

S&F in repairs 300mm, ordinary mild steel rat tail rod pattern springs including roller and roller plate complete

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.

S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.

Taking down shutter of any description n.exc 1 Sqm each and refixing in the same opening with necessary repairs all as specified.

Taking down shutter of any description exc 1 Sqm and n. exc 2 Sqm each and refixing in the same opening with necessary repairs all as specified.

Dismantling boarding any description fixed in any position with nails

S&F 19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

Cutting holes in brick walls exc half brick n.exc one brick, built in cement mortar for inserting hold fast and making good dismantled portion in cement concrete 1:2:4 type B-1 as required

S&F 125 mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified.

S & F Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing exc 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting, necessary bearing wheels and switch locking arrangement complete all as specified.

S&F 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium sections as in partition and doors.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S&F in repairs aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg.

S&F in repairs mortice lock vertical type size 100 mm brass all as specified

Dismantling structural steel work including doors, gates but excluding framed truss etc.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete using Fe- 290 (Gde E- 165)

S&F mild steel black plain sheet 1.25 mm thick but in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc.

Preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

M&L for plain fillets square rectangular or triangular in section clean sawn secured with nails or brads 2 nd class hard wood sectional area exc 3 and n exc 6 sqm

S&F in repairs gate and shutter, hooks and eyes 125mm, Aluminium plate type - II,

M&L for Boarding, 20 mm thick II nd class hard wood ,supplied & fixed with nails in any situation (except flooring and skirting) with butt joints as in cup board shelves

Supply and Fixing of vertical blinds as in curtains of windows and doors, including aluminium track boxes and necessary fittings all as specified and directed.

Taking down steel tubing and connections including cleaning for refixing or removal to store in 15mm dia tubes.

Taking down steel tubing and connections including cleaning for refixing or removal to store in 20mm dia tubes.

M&L for 15 mm dia tubes, 'medium' grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors in repairs,

M&L for 20 mm dia tubes, 'medium' grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors in repairs,

S&F in repairs rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical, vertical with closed top) hoisted and fixed in position including taking down all as specified

S&F in repairs rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical, vertical with closed top) hoisted and fixed in position including taking down all as specified

Ball valves 25mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms)

Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms)

S&F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe.

S&F in repairs 25mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified.

S&F in repairs Vitreous china wash basin, white, flat back, size 550x400 mm incl brackets

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white with plastic water closet seat, white, closed pattern with bottom, and cover and MS CP or aluminium hinging device,

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement;

S&F in repairs PVC, syphonic action type, flushing cistern, low level, white, 10 litres, with inlet ball valve, float, handle and flush pipe incl. brackets

S&F in repairs CP shower rose with or without swivel joints 125 mm size

S&F in repairs Angle valves, cast copper alloy, screwed down, high pressure and fly nuts, screwed for iron pipe 15mm bore all as specified.

S&F in repairs Stop cock (concealed type) cast copper alloy , Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, 15 mm bore.

Supply and fix chromium plated cascade health faucet with minimum 1200mm long pipe of fancy type all as specified.

S&F in repairs Bib taps 15mm bore cast copper alloy with crutch or butter fly handle chromium plated screwed down for iron pipe or for brass ferrule fixed.

S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device.

S&F in repairs Pillar taps CP cast copper alloy fancy type with capstan heads, chromium plated, screwed down, high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore.

S&F in repairs PVC connection 15mm size 450mm long with brass nuts on either sides

S&F Bath room PVC cabinet mirror of size 350mm x 450mm (Make : prayag Cat part No 551 or equivalent)

S&F 25mm dia stainless steel decorative fancy type curtain rods in repairs including brackets all as directed

S&F stainless steel decorative fancy type end knob for 25mm curtain rods in repairs all as directed

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre- painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F steel work in trusses, purlins, distance pieces including special shaped washer etc complete using ERW or induction butt welded tube confirming to IS 1161- 1979 grade S-240.

S&F 4.0mm thick figured glass, pin head type and glazing with oil putty in square n exc 0.5Sqm in each pane and fixed to aluminium frames using rubber packing including hacking out old broken glass all as specified

S&F in repairs 150mm Double action spring hinges for door shutters , mild steel with steel wire spring, stove enamelled, black

Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 25mm thick including 15mm thick in CM 1:6

Removing the existing roof treatment of any description completely and removal of all the debris from site and rubbish off the premises complete all as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointing in CM

M&L for 25mm thick, cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate and finished even and fair without using extra cement as in paving / roof slab.

M&L for cement screed bed 20mm thick in CM 1:4 using liquid waterproofing chemical as per manufacturers instructions. Note: (Liquid waterproofing chemical shall be measured and paid separately)

Supply only liquid water proofing chemical

M&L for APP Modified prefabricated five layer water proofing membrane, not less than 3 mm thick and weighing not less than 3.60 kg/sqm reinforced with non woven polyester matt black finished over compatible primer @ 0.3 Ltrs per sqm, and a bonding bitumen of VG-10 at 1.20 kg/sqm torching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions and finally finished with a coat of bit mastic aluminium paint @ 0.10 litre/sqm over a coat of blown bitumen 85/25 grade @ 1.20Kg/Sqm over the membrane. The Overlap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage including preparatory work. Note: The work shall be carried out by authorized applicators of manufacturers

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces finished with even and smooth without using extra cement in CM 1:6

M&L for Preparation of new plastered surfaces and applying two coat of oil bound distemper over a coat of chalk whiting on internal surfaces of walls.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Dismantling plain or corrugated steel sheeting any gauge, thickness, including nanital or similar pattern sheets in roof coverings.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including dismantling old pieces.

S&F mild steel wind ties for roof including securing bolts; including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer

Dismantling of wall and celling boards (fibre, pulp, insulation ,etc.,) or insulation boards / slabs / blankets, any thickness, including cover fillets.

S&F Modular False ceiling with vinyl laminated gypsum tiles having 8 mm thickness, of size 595mm x 595mm the tiles to be fixed with suspension system (Grid) of size 24mm x 32mm , made of hot dipped galvanised steel section to prevent corrosion and the exposed surfaces of grid chemically cleaned capping prepainted /backed in polyester paint. The standard procedure for installation of grids is to be followed, where main runners of standard length of 3600 mm used along with cross section of 1200mm c/c . Wall angle (size 22mm x22mm) of the same quality as the grids to be used on the periphery along the wall or partition using screws at 600mm c/c and cross tee (24mmx23) tube interlocked between main runner at 600mm c/c(max) to form a grid of 600mm x600mm. The main runner to be hung from the soffit with the help of 4mm dia GI wire hanger and 6mm dia wire anchored fastener @ 1200mm c/c ( Max ). Note : The work to be carried out by the auth manufacturer only.

Chamfers, splays, grooves, rebates, rounded angles, rounded nosings, tongued and grooved edges (each tongue and each groove measured) etc., exc 3mm but n. exc 75mm girth on softwood

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces finished with even and smooth without using extra cement in CM 1:3

Refixing old steel tubing and connections in new or old position of 20 mm size on walls, ceiling, floors, etc.

Taking down steel water tubing 25 mm bore and connection s including cleaning and refixing or offered as credit.

Refixing old steel tubing and connections in new or old position of 25 mm size (Walls, ceiling, floors, etc.

M&L for 25 mm dia tubes, 'medium' grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors in repairs,

Dismantling water tanks capacity exc 250 Ltr n exc 500 Ltr

Dismantling water tanks capacity exc 500 Ltr n exc 1000 Ltr

Dismantling water tanks capacity exc 1000 Ltr n exc 2000 Ltr

Refixing only of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position after proper cleaning all as specified in SSR Part except water tank of 500 ltrs

Refixing only of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position after proper cleaning all as specified in SSR Part except water tank of 1000 ltrs

Refixing only of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position after proper cleaning all as specified in SSR Part except water tank of 2000 ltrs

Supply and fix rotational moulded polyethylene water storage tanks of capacity 2000 litres (cylindrical, vertical with closed top) hoisted and fixed in position all as specified

Sree Gokul Enterprises