GE(W)/HSR-35/2022-23 SPL REPAIR BOUNDARY WALL (400 M) OF 33 ADSR, REPLACEMENT OF ASBESTOS SHEET WITH TIN SHEET IN OFFRS MESS BLDG NO T-405(40MTR X 8.5 MTR) OF 533 ASC BN, PROVN OF TWO X TOILET AND TWO X URINAL AND ONE X WASH BASIN WITH MIRROR AT 33

Amount

Excavation over area not exceeding 1.50 meter in depth and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm. In excavated area and in floor area fill the ground floor area upto top of plinth beam and complete all as specified and directed.

Excavating over areas, n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Excavating over areas, exc 1.5 m in depth and n.exc 3m and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Removing surplus spoil to a distance not exceeding 50m and deposited where directed at a level exceeding 1.50m from the starting point complete all as specified and directed.

PCC (1:4:8), type D-2, using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete including demolition of PCC complete all as specified & directed.

Demolition of brick work built in any type of cement mortar ,below or above ground level and complete all as specified and directed.

M & L for Brick work with Fly Ash Bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete and complete all as specified and directed.

40 mm thick damp proof course of PCC (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregate mixed with integral water proofing compound as per manufacturer's instructions including necessary form work complete all as specified & directed. Note :- Integral water proofing compound shall be measured and paid separtely

Apply evenly a coat of blown type bitumen at the rate of 1.50 Kg per square metre and binding with clean dry sand @ 0.05 cum per sqm over damp proof courses complete all as specified & directed.

Demoliton of cement concrete of any description & in any position not otherwise specifically provided for and removing debries out of MD land complete all as specified and directed.

M&l Providing precast cement concrete ,Type B1, 1:2:4 set in CM 1:4 for window or door cills,lintels,bressumers,steps,quion blocks,(for use with masonary) string courses ,copings, kneelers,apex stones,pier caps,columns,posts,boundary pillars,bed plates,pintle block, anchorage blocks,bounders,corbels,brackets etcwith plain fair faces,including chamfers,weathrings,throating incl formwork etc complete all as specified and directed.

Rough cast cement plaster as specified. (Rendering coat not less than 10mm thick in cement mortar 1:3 , while it is still in plastic state the rough cast mixture consisting of crused stone or fine gravel aggregate size 6 to 12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even) complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

M&L Preparation of new plastered or unplastered surfaces of wall and applying two coats of white or tinted cement base paint over a coat of primer complete all as specified and directed

Dismantling Asbestos cement (corrugated, semicorrugated,etc) sheets in roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old AC/CGi or any patteren old sheet and removing from site. complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old AC/CGi or any patteren old sheet and removing fron site complete all as specified and directed.

S&F Anodised aluminium snap grid of size 605mmX605mm frame work for false ceiling all as specified including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified .including dismantling old Frame of wooden or aluminum or any patteren old frame/grid and removing fron site.complete all as specified and directed.

Exposed metal frame ceiling with calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre or E-ceiling or similar material Board for fixing in 600mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) ®including dismantling old AC/CGI/PVC/wooden or any patteren old sheet and removing fron site.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of grade Fe-410 or E-250 complete all as specified and directed.

M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M & L one coat of oil bound distemper on old plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M & L one coat of weather coat on old surfaces of walls including preparation of surfaces complete all as specified and directed

Providing, cement concrete (1:2:4),type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L Brickwork with old size flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

Excavating of any type soil in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits ,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

M&L for PCC( 1:4:8) using 20mm graded stone aggregate Concrete bed to drain pipes of size 200mm dia including packing under and completely surrounding pipes with concrete after they are laid andn tested. complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where complete all as specified and directed.

M&L for plain Cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for Plain Cement concrete (1:2:4) type B-1 using 20mm graded stone agregates as in surface channels and drains etc complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L Brickwork with old size flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

M&L Cutting into existing manholes for connecting new drains, making good to pipe , internal dian of pipe is 150mm and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

All as per above item No 36.00 but walling and rendering, cutting out branch channel, and making good benchings complete all as specified and directed.

M&L for 200mm dia , Reinforced concrete pipes, class NP 3 with one collar per length of pipe including pcc bedding, hauching etc and demolition / dismantling of old pipe complete all as specified and directed.

M&L, 15mm thick rendering in CM 1:6 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement. complete all as specified and directed.

All as per item No 39.00 but in CM 1:4 complete all as specified and directed.

M&L Precast reinforced cement concrete nominal mix, TypeB0 1:2:4 (12.5mm graded aggregate) as in cover slab etc complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F PVC pipe (SWR) single socketed in any length with rubber ring joint, laid in trenches 110mm dia complete all as specified and directed.

S&F PVC pipe (SWR) single socketed in any length with rubber ring joint, laid in trenches 75mm dia complete all as specified and directed.

S&F 75 mm PVC (SWR) bends any radius complete all as specified and directed.

S&F of 75 mmdia PVC Cone cap cowl fixed in position complete all as specified and directed.

M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia of outlet complete all as specified and directed.

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation etc n.exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in hard/dense soil complete all as specified and directed.

M&L for Surface dressing n exc 15cm deep in Soft/Loose soil. complete all as specified and directed.

M&L Hard core of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick (in tranches and surface), watered and rammed to a true surface with broken stone or boulders complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (40 mm graded aggregate ) in foundations, filling and mass concrete complete complete all as specified and directed.

M&L RCC M-25 Design Mix as in slab supported by wall etc complete all as specified and directed.

M&L for brick work with fly ash Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed

M&L for brick work with fly ash Bricks,any redius half brick straight or curved on plan exceeding 6 mtr mean radius built in CM 1:4 complete all as specified and directed.

M&L for cement concrete type C-2, 1:3:6 (40 mm graded aggregate) 75 mm thick as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L for Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick finish with rough finish flat surface complete all as specified and directed.

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement on walls in CM 1:6 complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement on external walls in CM 1:4 complete all as specified and directed.

M&L Rendering 10 mm thick on fair faces(ceiling) on concrete surfaces finished even and smooth without using extra cement on external walls in CM 1:3 complete all as specified and directed.

M&L two coat of cement base paint on walls incl preperation of newly untreated surface with a coat of cement wash with portland cement .

M&L applying three coat of white wash on new plastered surfaces of wall incl preparation of surfaces complete all as specified and directed.

M & L two coat of oil bound distemper on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed

S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reiforced with MS square tube, suppling & fixing in opening as per specification & drawing. complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ hannel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 150 mm extruded Aluminium handles, cast type,anodised complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified and directed.

M&L non skid ceramic tiles 7 to 8 mm thick light shade (Square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over and including provision of cement screed bedding layer 15 mm thick in CM 1:6 etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 350x 250x 7mm/ 450X 350X 7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.

S&F Vitreous china wash basin white flat back size 550 x 400mm size, incl cutting for and pinning in ends of brackets or erecting stand but including of fixing of supply and waste pipe,32mm PTMT waste coupling,450mm long PVC connection,15mm dia chromium plated fancy type stop valve and 15mm pillar tap cast copper alloy with capstan head chromium plated complete all as specified and directed.

M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia of outlet complete all as specified and directed.

M&L bib tap brass 15mm bore dia chromium plated long shank fancy type with curtch or butterfly handle , screwed down, screwed for iron pipes complete in repairs complete all as specified and directed.

S&F steel water tubing galvanised 15mm bore, medium grade fixed to walls and ceiling or in floors incl fitting complete all as specified and directed.

S&F steel water tubing galvanised 20mm bore, medium grade fixed to walls and ceiling or in floors incl fitting complete all as specified and directed.

M&L Rotational moulded polyethylene water storage tanks (Cylindrical verticval with closed top) hoisted & fixed in position all as specified of 1000 ltrs capacity incl 20mm dia brass float valve complete all as specified and directed.

S&F Fixing only water meter, metal stopcock gunmetal gate valve, brass ball valve, gunmetal non-returning valve in PP-R pipe line (cost of male sockets included).

PVC pipe (SWR) single socketed in any length with rubber ring joint, laid in trenches 110mm dia complete all as specified and directed.

PVC pipe (SWR) single socketed in any length with rubber ring joint, laid in trenches 75mm dia complete all as specified and directed.

S&F of 75 mm Cone cap cowl complete all as specified and directed.

S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement including demolition of floor and taking down old floor trap and making good floor with matching floor in all respect complete all as specified and directed.

S&F 75 mm PVC (SWR) bends any radius complete all as specified and directed.

S&F of 75mm PVC (SWR) junction single, (Single T) equal or unequa complete all as specified and directed.

S&F of PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F of 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F of 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F of squating pan Orissa pattern of size 580X440 mm white with integel foot rest including connection to trap and to flushing pipe anti syphonage pipe complete including making good to floor complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan, COMBO OF Belmonte One piece Water closet, pedestal pattern, white, Floor mounted, including seat cover all as specified and directed

S& F of PVC valveless syphonic type 10Ltr capacity flushing cistern with inlet , ball valve and handle including flush pipe of pvc 32mm dia, complete fixing in repair. complete all as specified and directed.

S&F fancy type chromium plated angle valves, cast copper alloy with crutch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brass ferrule complete all as specified and directed.

Supply and fixed Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipee. PVC conection pipe, including flush pipe of polyethylene of low or high density or PVC complete all as specified and directed.

S&F Liquid soap container of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 105gms) complete all as specified and directed.

S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.

S&F fancy type chromium plated Angle valves, cast copper alloy with cruitch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule. complete all as specified and directed.

S&F Towel Rail 600mm long of CP fixed and including chromium plated brass screws and wooden /plastic cleats.(Minimum weight 190gms) complete all as specified and directed.

M&L for chequered cement concrete tiles, Chemical treated, Heavy duty, Size of 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigments in floor complete all as specified over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L 150 mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars. complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for 150 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete all as specified and directed.

S&F health faucet, 1mtr easy flex tube and hooks, Chromium plated finish complete all as specified and directed

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box of 1.6 mm thickness, 60 mm deep for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :- (a) One light /Ceiling fan/Exhaust fan point controlled by one Switch.

(b) One 3/5 pin switch socket 5/6 Amps on independent board.

(c) One 3/5 pin switch socket 5/6 Amps on same board.

Supply and fixing switch piano flush type single pole one way 5 amp.230 V all as specified & directed.

Supply & fixing socket 3 pin,5A ,Flush type, ISI Mark,complete all as specified and directed

Supply & fixing Lamp holder insulated Body with back plate batten/angle type for batten fittings complete all as specified and directed.

Supply and fixing LED bulb of capacity 9/10 W complete all as specified and directed.

S&F ceiling rose three terminals, ISI Marked.including, complete all as specified and directed.

S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting . Make Bajaj Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065-ALI complete all as specified and directed.

M&L for point wiring with 2.5 Sq mm PVC insulated and unsheathed copper conductor point in and including PVC rigid non metalic Concealed conduit of size 20/25mm ISI marked to be terminated in pressed steel terminal boxes including 2.5 Sqmm PVC insulated and unsheathed FRLS single core multistandard copper earth continuity conductor controlled by one switch and or one regulator complete and making good distrub surface of wall/ floor etc to match with the existing the surface etc complete all as specified and directed

Supply and fixing socket 3 pin 15A flush type ISI Mark complete all as specified and directed

S & F for Energy efficient LED light fitting 20 watt tubelight with led battern fitting providing high brightness and excellent illumination, better lumens and long life, high efficiency and lower power consumption No UV or IR radiation extended alluminium heat sink provided for efficeient heat dissipation & intergrated electronic driver complete including copper calbe 23/.0076 for electric connection for fitting from ceiling rose complete all as specified and directed.

S&F fan step regulator 120W suitable for 1200/1400mm sweep ceiling fan etc complete all as specified and directed

Supply and fixing electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 little BEE 5 Star rated complete with all accessories such as safety valve thermostate NRV connection piece etc complete all as specified and directed. Note GI Pipe & accessory required of side also included)

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and directed.

Supply and fix MCB SPN 32 Amps, breking copacity 10 KA (Type ' C' ) complete all as specified and directed

Supply and Fix of DB SPN , 4 way with 200 amps tated bus bar 240 volts Single door with isolated Neutral bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply & Fix Exhaust Fan steel body heavy duty AC single Phase 230 V of size 300 MM sweep with blades and frames & Louvers all as specified and directed

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source not less than 120 lumen/watt and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including 40 mm dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Cat part No ENXT P 24L WH CR PC SD (Edge plus series) complete all as specified and directed.

S&F 1100 volt grade heavy duty cable PVC insulated of size 10 sqmm stranded aluminium conductor twin core cable flate or circular served with inner sheathed of PVC tape and overall PVC sheathed in service connection by insulating hanger nut more than 1 mtr apart incl 4MM suspension wire, one twin core complete all as specified and directed.

S&F Steel rolling,1.25mm thick sheet with out ball bearing,as specified,anchoring rod, hasp and staple and one shop coat of primer,rercted in position as indicated,complete:gear operated type with bevel gear box and crank handle include make good to the wall complete all as specified and directed.

S & F Ball bearing suitable for rolling for shutter complete all as specified and directed.

S & F Safty lever locks 4 lever mild steel for rolling shutters complete all as specified and directed.

S & F 1mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M & L preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for Surface dressing n exc 15cm deep in Soft/Loose soil complete all as specified and directed.

M&L Hard core of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick (in tranches and surface), watered and rammed to a true surface with broken stone or boulders complete all as specified and directed.

M&L for 75mm Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (40 mm graded aggregate ) in foundations, filling and mass concrete complete complete all as specified and directed.

M&L for chequered cement concrete tiles, Chemical treated, Heavy duty, Mechine pressed, Size of 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigments in floor, over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for brick work with fly ash Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement on external walls in CM 1:4 complete all as specified and directed.

Supply and installation Hi Wall split units indoor/ outdoor complete with cordless remote control unit and with in built Heating and Cooling arrangement and Digital Inverter twin rotary of capacity 2 TR complete all as specified and directed

Supply and fix voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230 V cwith accuracy ioof + 2.5% and of capacity 5KVA complete all as specified and directed

M&L for termination single pointed aluminium Rod 12mm dia and 300mm long complete all as specified and directed

Supply and fixing Aluminium strip 25x3.15mm complete with fixing on saddles insulator including screws & arrangements etc for roof conductors and down conductors above ground upto test point complete all as specified and directed

S&F galvanised iron strip 32x6 mm buried in ground for earth continuity form earth electrode to test point terminal with saddles and fixing screws & arrangements etc complete all as specified and directed

M&L for 40mm bore pipe medium grade for protection of earth strips complete all as specified and directed

M&L for tst point terminal block made of gun metal of phosphorus bronze size 75x75x25mm of 6mm thickness or copper strip of 32x6mm 100mm long drilled and screwd including 4 Nos 8mm dia 25mm long hexagonal head brass screws fixing on insulators and screwed to wall for protection of test point complete all as specified and directed

Supply and fixing switch piano flush type single pole one way 15 amp.230 V all as specified & directed.

Supply and fixing 240V 10KA 'B' Curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP in the MCB DB complete with connection testing and commissioning all as specified & directed.

M&L for point wiring with using 2.5 Sq mm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 Sqmm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly as specified & directed.

M&L for Surface dressing n exc 15cm deep in Soft/Loose soil complete all as specified and directed.

M&L RCC M-25 Design Mix as in slab supported by wall etc complete all as specified and directed.

M&L RCC M-25 Design Mix as in lintel, plinth, beam etc complete all as specified and directed.

M&L for screed bed or bedding layer or mortar 15mm thick in cement mortar 1:4 with WPC on roof surface,

M&L applied a coat of bituminious primer confirming to IS-3384@ 40 Kg per Sqm APP BASED POLYMERIC MEMBRANE NOT LESS THAN 3 MM THICK WEIGHING NOTless than 3mm thick weighing not less than 3Kg/sqm reinforced with polyster non woven fabric (weighing not less than 15gm/sqm) and upperside of membrane thermally insulated with white mineral gravel finish, uniformly embedded during manufacturing process shall be lain dry torch application, side civerlaps shall be 75mm and end slab shall be 100mm and all over laps joints shall also be sealed by torch application including one coat of bituminum paint all as speciied and directed

S&F TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as speciied and directed

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. all as speciied and directed

M&L Rendering 5 mm thick on fair faces(ceiling) on concrete surfaces finished even and smooth without using extra cement on external walls in CM 1:3 complete all as specified and directed.

S&F for pressed steel frame of 105x60mm for doors with one or more rebates including necessary fixing ligs,hinges,locks strike platr,etc, complete as specified supplied and fixed.

S&F 30 mm thick flush shutters,(II class) solid core constructed with block board core and plywood face panels commercial type on both sides complete all as specified and directed

S&F Butt hinges, 100mm medium weight, cold rolled mild steel complete all as specified and directed

S&F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 250 mm size all as specified and directed

M&L preparing new Surfaces of Wood of any description, over 10cm in width or girth,not otherwise described and applyiny two coat of synthetic enamel paint over a coat of Pink prime complete all as specified and directed

M&L non skid ceramic tiles 7 to 8 mm thick light shade (Square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over and including provision of cement screed bedding layer 15 mm thick in CM 1:6 etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 350x 250x 7mm/ 450X 350X 7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 complete all as speciied and directed

S&F Vitreous china wash basin white flat back size 550 x 400mm size, incl cutting for and pinning in ends of brackets or erecting stand but including of fixing of supply and waste pipe,32mm PTMT waste coupling,450mm long PVC connection,15mm dia chromium plated fancy type stop valve and 15mm pillar tap cast copper alloy with capstan head chromium plated complete all as speciied and directed

S&F of 75mm PVC (SWR) junction single, (Single T) equal or unequa complete all as specified and directed.

S&F fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as speciied and directed

S&F brass cromium plated shower rose 125mm size all as speciied and directed

S&F PVC connections 15mm size with PTMT nuts of length 450mm all as speciied and directed

S&F 15mm fancy type chromium plated Stop valves(Concealed type), cast copper alloy screwed down high presure, with with with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F Vitreous China wash down water closet pan (pedestal pattern), white with sheet cover(excluding fixing bolts, flushing cistern and flush pipe)

S&F brass CP jet for water closet (pedestal pattern) complete all as specified and directed

M&L for 100 mm PCC of 1:4:8 typr D-2 under sub base of path. complete all as specified and directed

M&L for coping of type C-1, 1:3:6 of 20 mm graded aggregate complete all as specified and directed

M&L 150 mm (6'') PVC pipe for drain laid and jointed complete with collars complete all as specified and directed

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for 150 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete all as specified and directed.

S&F 20mm Granite for partition of urinals work like in cement mortar (1:4) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

Earthing complete with galvanised mild steel earth plate electrode 600X600X6 mm thick buried directly in ground vertically (earth pit not less than 2.25 m deep below normal ground level) with the top edge of the earth plate electrode at a depth not less than 1.5m below normal ground level and including GI earth strip 32 x 6 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth plate electrode at one end and connected to metallic bodies of HT/LT equipments etc at the other end, earth strip encased in and including 50 mm bore GI medium grade pipe with all fittings from top of earth plate electrode to body of equipment fixed with and including 25x 6mm flat iron clamps, bolts, nuts and washers and including providing watering pipe 20mm bore GI pipe medium grade from Bottom of concrete pit to top of earth plate electrode complete all as specified and shown in electrical plate No 3 of MES SSR Part-I. The scope of work includes necessary excavation and earth work in any type of soil, removal of soil upto 50 metre, PCC pit with precast RCC cover, charcoal/salt, funnel, CI frame etc complete all as specified and directed. Notes : (i) The concrete pit shall be made in PCC 1:3:6 type C1 using 12mm graded crushed stone aggregate 40mm thick precast cover slab or RCC (1:2:4) type B1 using 20mm graded crushed stone aggregate with suitable MS handle in lieu of CI cover shown in electrical plate No 3 of MES SSR Part I shall be provided. Reinforcement in RCC cover shall be of 8mm dia TMT bars laid @150mm c/c both ways. (ii) Item includes the cost of 7.5m GI pipe for protection of earth stip. any variation in length shall be measured and paid through deviation order. (iii) Item includes cost of 7.5 m earth strips. any variation in length shall be adjusted through deviation order. (iv) Earth plate electrode shall be surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all sides.

m/s krishna engineers1