SPL REPAIR TO BLDG NO ET-174 AND ET-175 (HQ COY LINES) FLOORING, CEILING, TILING, WOODEN WORK AND E/M WORK AT RANGIYA UNDER GE RANGIYA

Amount

Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and directed

Taking down cement plaster on brick/concrete surfaces of walls and ceiling including racking out jointing hacking for key, scrubbing down with water etc complete all as specified and directed

Taking down wooden shutters of any description n.exc 1 sqm each complete all as specified and directed

All as above item No 3 above but exc 1 but n.exc 2 sqm each

Taking down chowkhats incl shutterrs n exc 1.5 sqm complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

Dismantling of Boarding, any description and any position, fixed with Nails, complete all as specified and directed.

Dismantling of wall & ceiling Boards (fibre,pulp,insulation etc. ),or insulation board/slabs/ blankets ,any thickness, including cover fillets complete all as specified and directed

Dismantling of AC sheet corrugated / Semi corrugated sheets in wall cladding or in roof covering complete all as specified and directed

S & F 30 mm thick flush shutter , solid core construction ,with block board core and plywood face panel ,commercial type on both side complete all as specified and directed

S/F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters complete all as specified and directed

M&L 12 mm thick rendering in cm (1:6) on one side of lathing finished even & smooth without using extra cement complete all as specified and directed

G I Wire netting 0.9 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc., in walls, ceilings, stanchions, beams, etc., including all laps, cutting and waste complete all as specified and directed

M&L 18 mm thick rendering in cm (1:4) one side of lathing with using WPC @ 3% finished even & fair complete all as specified and directed

M&L 15mm thick rendering in cm (1:4) on fair faces of brick work finished even & fair complete all as specified and directed

M&L applying two coats of distemper over a coat of 3mm thick a layer of wall care putty on walls complete all as specified and directed

M&L two coats of oil bound distemper over a coat of 3mm thick layer of wall care putty including preparation of old surfaces by complete removal of existing treatment complete all as specified and directed

M&L two coats of cement base paint over a coat of primer including preparation of new surfaces complete all as specified and directed

M&L two coats of cement base paint over a coat of primer including complete removal of existing treatmentcomplete all as specified and directed

Supply only integral water proofing compound complete all as specified and directed

M&L 75mm thick P.C.C 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base/path etc complete all as specified and directed.

M&L 25 mm thick P.C.C (1:2:4) type B-1 using 20mm graded stone aggregate as in floor finished rough complete all as specified and directed

M & L Screed Bed or Bedding Layer 15mm thick in Cement Mortar 1:6 for laying Floor Finishes/Tiles, complete all as specified and as directed

M & L for Rendering or Backing Layer 10mm thick in Cement Mortar 1:4 on Walls, etc. for fixing Tiles as Skirtings, Dados,risers etc, complete all as specified and directed.

M & L for machine cut kota stone on flooring/staircase 20-25 mm thick over cement screed bed laid and jointed with grey cement slurry mixed and with pigment to match the shade of slab including rubbing/grinding and polishing complete all as specified and directed

All as per item No 26 above but on skirting

Rounding to edges of stone slabs one edges such as in steps & other similar situation complete all as specified and directed

S&F Stainless steel mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staples complete all as specified and directed

S&F in repair Stainless steel wire cloth 0.36 nominal dia wire and average width aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

Materials and Labour for mid steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Hacking Out Old Broken Glass (any thickness, size, quality or description) from Wooden Frames, Glazed with Putty or fixed with Beads, complete all as specified and directed.

S&F 3mm thick ordinary quality sheet glass in squares n.exc 0.5 sqm in each pane glazing with oil putty complete all as specified and directed

S&F 100mm size extruded aluminum alloy handles, fabricated type, anodized complete all as specified and directed

S&F 150mm long aluminium handle, cast type, anodised complete all as specified and directed

S&F 100mm long aluminum anodized barred tower bolts of extruded section complete all as specified and directed

s&f 100mm size MS butt hinges, medium weight, cold rolled complete all as specified and directed

S&F 200 mm aluminium anodised barrel tower bolt, of extruded section and fixed in position complete all as specified and directed

S&F 250mm long M.S sliding door bolt, bolt type stove enameled black with bright bolt not less than 12mm dia and including a minimum of six bolts and nuts four on bolt plate & two on staple plate complete all as specified and directed

S&F 125 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed

S & F Floor door stopper 14cm long of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in repairs in floor complete all as specified and directed

S&F in repair exposed GI powder coated snap grid frame of false ceiling 600 X 600 mm size of wall angle 25 X25 X 0.30mm size cross Tee 22 X 35 X 0.60mm with 4mm dia GI suspender fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm including supply and fixing of 4 mm thick E- board in false ceiling including fixing arrangement from roof and applying three coats of white wash on exposed surfaces complete all as specified and directed (Note- Rate included for lowering / shortening of electric fittings such as fan, light fittings etc.

S & F in repair 300mm, ordinary rat tail rod pattern door springs including roller and roller plate complete all as specified and directed

Dismantling timber scantling 40 sq cm and over in section in any position complete all as specified and directed

All as per item No 44 here-in-before above but except timber complete all as specified and directed

M&L 2nd class H.W scantling wrought as in unframed work complete all as specified and directed

Dismantling of timber boarding of any description fixed in any position with nails complete all as specified and directed.

Supplied & fixed 50 mm thick Boarding of 2nd class hard wood, with nails in any situationPlaned one side with butt joints complete all as specified and directed

All as per item No 48 above but 20 mm thick planed both sides.

Preparing surface of wood and wood based material new of any description and girth exc 10 cm other wise decribed and treated with two coat of creosote oil complete all as specified and directed

M&L for 2 coats of synthetic enamelled paint over coat of pink primer on wooden surfaces oves 10cm width or girth including preparation of new surface complete all as specified and directed

M&L 75mm thick P.C.C 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection complete all as specified and directed.

Forming Constrution (Dummy) joints 30 mm deep x 10 mm wide, filled with sealing compound grade A complete all as specified and directed

M &L PCC (1:3:6) type C-2 as in drain/surface channel and similar work complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete with fair finished with using extra cement complete all as specified and directed

M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/eaves board, fixed with selftapping screws complete all as specified and directed

Demolition of brick work built in cement mortar including all quions, arches pillars etc. complete all as specified and directed

M & L Brick work built in CM 1:4 with sub class "B"old size bricks straight or curved on plan exceeding 6 m mean radius complete all as specified and directed

M&L brick work using sub class ‘B’ bricks (old size) straight or curved on plan to any radius in half brick work built in CM 1:4 complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S & F of Fe-410 Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed

M&L for preparation old painted surfaces of steel and iron surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Preparation of wood and wood based material, steel or iron work of any description or girth not otherwise described and treated with with tar or coal tar black paint complete all as specified and directed

Sanding newly tarred or painted surfaces with clean sharp sand complete all as specified and directed

M&L for ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 drgee at 150 mm centre to centre and sealing the same complete all as specified and directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) complete all as specified and directed.

Taking down main switches DBs with sheet metal enclosure 2/4/6/8 way SPN/TPN/DBs complete all as specified and directed.

Taking down old existing ceiling fan/exhaust fan of any size, to be kept in store and painting of ceiling fan/exhaust fan complete in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust complete all as specified and directed.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated unsheathed 1100 volts grade cable stranded copper conductor single core in casing caping of 20/25 mm complete with pvc terminal box for fitting mounting switch/ sockets regulators etc with laminated sheet 3 mm thick cover and with 1.5 sqmm PVC insulated copper conductor earth wire and connected to earth dolly for one light point controlled by one switch complete all as specified and directed.

All as per item No 70 above but ceiling fan point controlled by one switch

All as per item No 70 above but for one bell point controlled by 5 Amps bell Push

All as per item No 70 above but for one 3 pin socket 5 Amp single pole one way on same board

All as per item No 70 above but for 3 pin socket outlet 15 Amp independent with cable 4 sqmm unsheathed stranded 1100 Volts grade complete with 4 sqmm PVC insulated earth wire and connecting to earth dolly

All as per item No 70 above but for one 3 pin socket 5 Amp independent

Supply and fix ceiling rose surface backelite, three terminal complete all as specified and directed.

Supply and fix switch piano type 5 Amp single pole one way complete all as specified and directed.

S&F stepped type electronic fan regulator flush type for ceiling fan suitable for 1200/1400 mm sweep including necessary electric connection complete all as specified and directed.

Supply and fix socket outlet 2 in 1, 5 pin 5 Amp flush type complete all as specified and directed.

Supply and fix switch socket combination multipurpose 3 pin 15 Amp and 3 pin 5 amp flush type 2 in 1 complete all as specified and directed.

S&F angle type lamp holder PVC polycarbonate type suitable for batten fittings complete all as specified and directed.

Supply and fix bell push 5 Amp flush type single pole 230 volts one way complete all as specified and directed.

Supply and fix call bell AC, 230 Volts single pole complete all as specified and directed.

Supply and fix sheet metal enclosure powder painted MCB DB SPN double door 230 Volts 12 way double door complete all as specified and directed.

S&F MCB single pole and neutral upto 32 A capacity 240V complete all as specified and directed.

Supply and fix MCB SP 240 Volts 6 to 32 Amps breaking capacity 10 KA rating complete all as specified and directed.

Supply and fix LED batten 4' with wide angle profile. high lumen batten suitable for 20 Watt complete all as specified and directed.

Supply and fix LED tube 20 W with single side connection suitable to fix in LED baten of 20 Watt complete all as specified and directed.

S&F Building security light fitting, energy saving new generation of 10W LED bulk head luminaire with opal diffuser complete with LED lamp of 10W LED complete all as specified and directed.

Material and labour for eathing complete with galvanised steel earth plate electrode 600 x 600 x 6.3mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level coneected to galvanised earth lead wire of 4.0 mm by mean of bolts, nuts, check nuts and washer of galvanised iron steel all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including PCC pit and CI cover cover fullel with watering pipe, wire mess and copper lugs etc GI protection pipe of size 15mm dia including testing on completion complete all as specified and directed.

S & F 4 Sqmm two single core PVC insulated cables with standed FRLS copper conductor 1100 V for sub main wiring (Red and black colour) and drawing in to and including PVC casing and capping 20mm wide with all fitting including 4 Sqmm PVC insulated stranded FRLS copper conductor cable earth continuity conductor (green colour)complete including taking down unserviceable cable complete all as specified and directed. (Note:-Three runs of 4 sqmm cable alongwith casing caping shall be measured as one length)

S&F PVC terminal boxes for mounting mounting of DBs with 2 mm thick plastic laminated sheet cover complete all as specified and directed.

Supply and fix down rod 12mm dia made out of high density mild steel 900 mm long as per approved sample complete all as specified and directed.

S&F 1100 Volts grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape and over all PVC sheathed for service connection suspended by insulating hangers not more than 1mtr apart including 4 mm dia suspension wire one twin core cable of 16 sqmm size flat or circular complete all as specified and directed.

Hanging only ceiling fan/exhust fan of any sweep to its original position including necessary electric connection with new flexible cord copper three core of size 40/0.00076 complete all as specified and directed.

30. Supply and fix LED lamp 7 W complete all as specified and directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the IRC specifications shall be followed. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.

RAJKAMAL ENTERPRISE

M/S S.S. Construction

m/s dip contruction