REPAIR/REPLACEMENT OF EXISTING SEWAGE LINE, SEPTIC TANK, SOAKAGE WELL AND REPAIR TO TOILET AND REPAIR TO PATHWAY, HARDSTANDING, FENCING, DRAINAGE, REPAIR AND MAINTENANCE OF EM INSTALLATION AT MFFR UNDER GE (N) BIKANER.

Amount

M&L Preparing old decorated surface plastered or unplastered by brooming down etc. and applying one coat of white wash on walls including cornices pilasters etc complete all as specified.

M&L Preparing old decorated surface plastered or unplastered by brooming down etc. and applying one coat of white wash on ceilings complete all as specified.

M&L Preparing old decorated surface of walls including cornices pilasters etc and applying one coat of cement base paint white or tinted as directed .

M&L Preparation of old painted surface of wood or wood based material over 10 cm width or girth of any description & applying one coat of synthetic enamel paint complete all as specified.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete.

M&L Rendering 10mm thick in cement and sand mortar 1:6 on fair face of brick work or cement concrete surface including finishing the surface even and smooth without using extra cement complete all as specified and as directed .

M&L Rendering 15mm thick in cement and sand mortar 1:4 on fair face of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement and with using water proofing compound as per manufacturer's instructions complete all as specified (WPC shall be measured & paid seperately as supply only)

Supply only liquid water proofing compound ISI marked.

M&L Preparing of new plastered plastered surface by brooming down on wall and applying three coat of white wash complete.

M&L preperation of new plastered surface and applying two coat of cement base paint of approved tint, colour on wall including cornices, pilastes as directed by Engr-in-charge and all as specified.

Complete removal of existing treatment on wall and applying two coats of cement base paint all as specified and directed.

Hacking out old broken glass ( any size, thickness, quality or description) from metal frame glazed with putty.

M&L 3mm thick Sheet glass ordinary quality and glazing with oil putty in square n exec 0.50 sqm each.

Dismantling existing terrazo dado /flooring or tilles in floors or in vertical surface etc.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed.

M&L for 75mm thick Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, , finished even and smooth using extra cement , laid in panels including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete.

M&L 40 mm thick PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, as wearing coat finishing surface even and smooth without using extra cement with using metallic hardner complete all as specified and as directed by Engineer-in-Chare.

M&L coloured Glazed ceramic tiles 300X200mmX7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the floor as on vertical surfaces laid over 10mm thick cement plaster in 1:4.

M&L for 20-25mm thick Machine cut Kota stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing laid over 15 mm thick cement plaster in 1:4.complete.

M&L for 20-25mm thick Machine cut Kota stone in riser to steps, skirting, dado and pillar etc on vertical surfaces laid over 15 mm thick cement plaster in 1:4..

M&L Machine pressed precast conctete glossy and coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M35 grade manufactured using grey cement and no pigment complete all as spcified and directed.

M&L for sand filling under floors, cushning under interlocking tiles or in foundations complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6), type C2 using 40mm graded stone agg as in sub base of floors etc finished even and rough complete all as specified and directed.

M&L cement concrete 1:2:4 type C-1 using 20mm graded stone aggregate in cills, bed blocks, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete.

S&F 35mm thick Second class hardwood factory made plain, framed, panelled shutter (two panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete.

Taking down chowkhats (without taking off shutter from frame ) exc. 1.5sqm but n exc 4 sqm each complete.

S&F Steel window with side hung shutter incl.box type hinges with steel handle of MS flat 25x5mm and 2nos tower bolt of 100mm long fixed to shutter comp. With glazing bar dovtailed or welded including one shop coat of primer.

S&F Steel window with side hung shutter incl.box type hinges with steel handle of MS flat 25x5mm and 2nos tower bolt of 100mm long fixed to shutter comp. Without glazing bar dovtailed or welded including one shop coat of primer.

S&FGalvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples complete.

S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples complete.

M&L Preparation of new steel surface over 10 cm width or girth of any description & applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified.

S&F Mild steel sliding door bolts -250-mm long, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete.

S&F Mild steel pressed handles, oval type, stove enamelled black,150 mm size complete.

M&L for Preparing new or previously untreated surfaces of wood and wood based materials of any decription exceeding 10 cm in width or girth when un-connected with other painting or when painted in different tint and applying two coats of synthetic enamel paint over and including a coat of pink primer complete.

M&L Butt hinges medium weight, cold rolled mild steel 100 mm size complete.

S&F Mild steel barrel tower bolts, stove enamelled black, with bright bolt, 200 mm long complete.

Taking down or up, 15 mm bore galvanised steel tubing and connections removal complete all as specified and directed by Engineer -in-charge.

Taking down or up, 20 mm bore galvanised steel tubing and connections removal complete all as specified and directed by Engineer -in-charge.

S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15mm complete all as specified and directed by Engineer-in-charge.

M&L GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20mm complete all as specified and directed by Engineer-in-charge.

S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) 3 layered ISI marked hoisted and fixed in position all as specified in SSR Part-I, , including Ball brass valves, high pressure, with polythene float and flynut com

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) 3 layered ISI marked hoisted and fixed in position all as specified in SSR Part-I, , including Ball brass valves, high pressure, with polythene float and flynut com

S&F in repair 15mm bore ball brass valve (Float valve) high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed by Engineer-in-Charge.

Demolition of brickwork built in cement or cement lime mortar complete all as psecified and as directed by Engr-in-Charge.

M&L for Brick work with fly ash bricks old size straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and as directed by Engr-In-Charge.

All as per serial item No. 46 here-in-before but using old bricks and directed by Engineer-in-Charge.

M&L for Mild steel work conforming to Fe-290 Gde E-165 in nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete.

Dismantling mild steel work of any description not otherwise provided for.

M&L Mild steel, plain black sheet in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; waters tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc.

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 30 cm and dia of shank 16 mm complete all as specified and as directed by Engineer-in-Charge.

Cleaning/removing blockage of sewer line (SGSW/RCC/CI) of dia 100/150/200/300mm etc of any description or in any position by roding, by pressure pump of any type or by using any mechanical equipments, manually or by puncher of sewage`line and repair the same if required including taking off and refixing manhole covers including removing all sludge in or outside MOD land complete all as specified and directed by Engr-in-Charge.

De-watering from septic tanks/soakage wells by suitable pumps and also removing of all wastes, semi solid or liquid of any description to the location as specified and directed by Engr-in Charge. (note: dewatering tank will be taken to the STP location shown by Engr-inCharge.)

De-sludging by removing of semi solid sludge from existing septic tanks of any depth, any capacity in foul condition, including taking and placing in position the manhole cover of any description, removal of sludge & solid content to any place outside defence land and deposting where directed by Engineer-in-Charge.

De-sludging the existing / cleaning of man holes of depth not exceeding 2 mtrs of any size by removing silt/grit/sludge and faul water either by mannual or by mechanical means and flushing water through man holes to ensure free flow of sewage, placing back the man holes covers in position including removal all the sludge/silt/any foreign material from the sewer lines out the defence land complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches in soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m deep in foundations or for walls of manholes etc not exc 10 sqm on plan and not exceeding 1.5 m in depth and getting out complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, soft/loose soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge.

Removing surplus soil obtained from item Nos 8 & 9 here-in-before to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as directed by Engineer-in-Charge

Demolition of cement concrete hunching without bedding layer to drain pipes including drain pipes etc complete against the side of the pipe &removing all retrieved material all as directed by Engr-in-Charge.

M&L Cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate bed to drain pipes, including packing under and hunching against the sides of pipes,, after they are laid and tested in 150 mm dia of pipe complete all as specified

M&L Salt glazed stone were drain pipes,Class SP3, 150 mm bore (internal dia) laid in trenches over existing concrete bedding and jointed as specified

M&L in repairs 100mm bore cast iron soil, waste and vent pipe in any length , sand cast pipe with and without ears (conforming to IS-1729 of 2002 second revision , laid under floors trenches with cement joints complete all as specified and as directed by Engr-in-Charge.

Demoliton of stone slab as in roofs , suspended floors any thickness jointed in any mortar complete all as specified and as directed by Engineer-in-Charge.

M&L Jodhpur stone of roof slab self faced ,7.5cm to 10 cm thick ,25 cm to 35cm wide ,hoisted and set ,jointed and grouted in cement and sand mortar (1:6) complete all as specified

M&L 50mm thick P.C.C 1:3:6 C2 using 40 mm graded stone agg. As in floors over stone patti roof slab finished the surface even and fair complete all as specified and as directed by Engineer-in-Charge.

Cutting into existing manholes or connecting new, drains making good existing benching or forming channel and reforming benching with cement and sand mortar 1:4 or PCC 1:2:4 type B-1 smooth finished and reforming benching as in 150 mm dia of pipe complete all as specified and as directed by Engineer-in-Charge

S&F in replacement Vitreous china squatting pan of orissa pattern, white of size 580x440 mm with integral foot rest and P or S trap in cluding provision of lime concrete bedding min 150mm thick (1:2:5) inc taking out old WC complete.

S&F in repair Wash down water closet (Pedestal pattern), complete with PVC (SWR) 'P' trap 110mm dia including jointing with cement mortar to existing CI pipe line complete all as specified and as directed by Engineer- in - Charge.

Supply & fixing repairs plastic water closet seat cover, colour pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device.

M&L Pre cast reinforced cement concrete 1: 2 :4 using 20 mm graded stone aggregates as in manhole covers including removing old damaged cover from manhole complete all as specified and as directed by Engineer-in-Charge

M&L for Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete.

M&L P.C.C (1:2:4) type B-I using 20 mm graded stone aggregate as in surface channels and drains etc inside the manholes complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Cast iron floor trap with grating including jointing to waste pipe in run lead, dia of outlet 100 mm, fixed in cement concrete 1:2:4 complete.

S&F in repairs Cast iron Nahani trap with grating including jointing to waste pipe in run lead, dia of outlet 100 mm, fixed in cement concrete 1:2:4complete.

S&F in repairs Cast iron bends (any radius) with duck’s foot or heel rest, 100 mm bore with cement joints, fitted with oval access doors complete.

S&F in repairs Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, 100 mm bore with cement joints complete.

S&F in repairs PVC (SWR) bends any radius, 110 mm bore complete.

S&F in repairs PVC (SWR) bends any radius, 75 mm bore complete.

S&F in repairs PVC (SWR) junction single, (single T) equal or unequal any radius, 110 mm bore complete.

S&F in repairs PVC (SWR) junction single, (single T) equal or unequal any radius, 75 mm bore complete.

Supply & fixing in repairs PVC (SWR) pipes 110 mm dia single socket in any length with rubber ring joints fixed to walls including MS clamps etc incl taking down unservicable pipe complete.

Supply & fixing in repairs PVC (SWR) pipes 75 mm dia single socket in any length with rubber ring joints fixed to walls including MS clamps etc incl taking down unservicable pipe complete.

S&F in repairs PVC (SWR) reducers 75-110 mm dia

S&F in repairs Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 100 mm bore pipes complete.

Dismantling posts or struts (RCC or steel) any section , including taking out embedded portion and making good disturbed ground

Dismantling fencing wire , any type complete.

Excavating in post holes (or similar holes) in loose/soft soil each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm ,watering and removing surplus soil to a distance not exceeding 50m and making good surface complete.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete.

M&L for Mild steel work for posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete Fe-290 Gde E-165.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete.

Supply only chain link mild steel galvanized fencing, any type or size complete.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm to 80mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed complete.

M&L for 75mm thick Cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate in ]\ floors and paving, laid in panels and finished even & smoth without using extra cement complete.

M&L for pre cast RCC jali 35mm thick in PCC (1:2:4) type B0 using 12.5mm graded stone aggregate set and jointed in CM 1:6.

ADD Extra for forming fair finished drain or channel exc. 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete for each 25 mm girth or part thereof over 30 cm.

shubham enterprises

M/S BIKANER CHEMICAL LABORATORIES