SPECIAL REPAIR TO ROAD CULVERT AND ALLIED WORKS AT NO MIL TRG BN AMC CC UNDER GE EAST LUCKNOW

Amount

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat with bituminous primer @ 5 kg per 10 sq m, putting in premix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with premixed sand seal coat (6.8 kg of binder with 0.06 cu m of sand), again well rammed (including supply of premix binder and sand) depth of potholes n exc 30 mm using paving bitumen VG 30 grade including rolling complete all as specified.

Scarifying or picking gravelled macadam or bituminous macadam surfaces area n. exc 400 sqm and depth exc 50 mm but n exc.100 mm complete all as specified and directed.

M&L preparing black top surfaces by brushing with wire brushes for removing caked mud etc and using mechanical compressor to remove all loose dirt etc and applying evenly a tack coat with bituminous primer using paving bitumen VG 10 grade at 5 Kg per 10 Sqm with paving bitumen for laying bituminous macadam all as specified and directed.

M&L for premix bituminous macadam laid / rolled and compacted to reqired gradient and camber (consolidated thickness 75mm or less) by using paving bitumen VG 30 @4% by weight of total mix,using 8 to 12 tonne power roller ,complete all as specified and as directed.

M&L for Bituminous premix semi dense asphaltic concrete 30 mm consolidated thickness with 5.5% binder content by weight of total mix, using hot mix plant and spreading with machenical paver, rolled and compacted to required camber and gradient and for uniform smooth surface by using power roller 8 to 12 tonne capacity complete all as directed and directed.

M&L for laying 2.5mm thick hot applied thermo plastic road marking painting uniform thickness with glass beads as per clause No 803 of MOST specification including cleaning of road surface heating of material within specified temperature limit for marking with necessary arrangement complete all as specified and directed.

S & F 'Cat Eye' in size of width n.exc 130mm and hight n.exc 20mm made of strong engineering high impact resistant polymer with electronic welded lenses for retor reflective in dry and wet weather condition along with bituminous adhesive complete all as specified and directed.

Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc and getting out in soft/loose soil complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed.

Taking down cement or cement lime plaster or stone / brick wall, ceiling including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in foundations filling of retaining walls of culvert, sub base and mass concrete filling, etc complete all as specified and directed

M&L RCC (M-25 Degisn Mix) 20mm graded aggregate foundations, bases of retaining walls of culvert, foundation beams, bases of columns etc complete all as specified and directed.

M&L RCC (M-25 Design Mix) 20mm graded aggregate in retaining walls, basement walls, ballast walls of any thickness above top or footings, including attached pilasters and buttresses complete all as specified and directed.

M&L PCC coping type C1 (1 :3:6 ) 20mm graded aggregate as in coping of RCC reatining wall complete all as specified and directed.

S&F (TMT bars) 10mm dia and over cut to length, bent to shape required, including cranking and bending spirally for hooping for coloumns, hooking ends and binding with and including M.S wire not less than 0.9mm dia all as specified and directed.

M&L for form work flat, fair finished surface of concrete for side of footing coloumns plinth beams or similar work including any types of supports/scaffolding etc all as specified and directed by Engineer-in-charge.

M&L form work fair finished surfaces of concrete to faces of retaining walls, abutments, parapets and staircase railing and similar work including attached pilasters, buttresses etc complete all as specified and directed.

M&L rendering 10mm thick in cement mortar 1:4 on fair faces of brick / concrete surface complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with complete all as specified and directed.

Returing, filling in including spreading, leveling, watering and well ramming in layers not exc 25cm complete all as specified and directed by Engr-in-Charge.

Removing excavated material n exc 100m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.

M&L boulder ptiching, hand packed tightly and grouted with cement mortar 1:6 completed all as specified and directed.

M&L moorum filling, laid dry in layers n. exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperature 1.40mm and fixed with tinned tacks or galvanises wire staples as in filter media complete all as specified and directed.

Gaurav Enterprises

BHARAT ASSOCIATES PVT LTD

M/S SHIVA CONSTRUCTION

QUALITY CONSTRUCTIONS CO

M/s Bipin Construction