REPAIR TO FLOORING PLASTERING TILING JOINERY SANITARY FITTING CLEANING OF SEWAGE LINE SEPTIC TANK AND SOAKAGE WELL AND PERIODICAL SERVICES AND MISC WORKS IN DAD APPOINTMENT HOUSES IDAS FLATS AND CDA (FUND) MEERUT UNDER AGE B/R-I AND AGE E

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar included all quoins arches pillars etc complete all as specified and directed

M&L for brick work with sub class fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified and directed

M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified and directed

Demolition of cement concrete of ground floor n exc 15 cm in depth in any position nototherwise specifically provided for complete all as specified and directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified and directed

M&L for rendering 10 mm thick in CM 1:4 for fixing of wall tiles/marble dados finishes complete all as specified and directed

S&F non skid coloured ceramic tiles coloured of 7 to 8 mm (square/ rectangular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm screed bed in CM 1:6 complete all as specified and directed.

All as described srl item No 8.00 here-in-before but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cement to match including 15 mm thick screed bed in cm 1:6 complete all as specified and directed

S&F Coloured Glazed colour ceramic tiles in vertical surfaces 450x300x7mm/350x250x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) joint free with grout of matching shade complete all as specified and directed

M&L for Ceramic glazed wall tiles including designer/digital/HD/Polished tiles (thickness as specified by the manufacturer), area of each tiles exceeding 0.18 Sqm but not exceeding 0.72 Sqm in flooring set and jointed in premium epoxy grout (Kajaria KE-100 or equivalent) to match the colour of tiles and including laying over cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness bedding on brick/concrete surfaces complete all as specified and directed. Note: Rates Inclusive of Premium epoxy grout, premium tile adhesive and shall not be paid separately.

M&L for anodised aluminium door shutters without sash bars, aluminium sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings such as, hinges, handles, including anodised aluminium frame with one or more rebates including S&F 5 to 6 mm thick black glass all and aluminium grill fixed to frame complete all as specified and directed

M&L for Treatment of soil under existing floors/walls using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors/wall complete all as specified and directed

S & F in repairs 12mm thick toughned glass as in fixed glass, hinged doors, partitions, automatic doors, windows and similar work including cutting to shape, drilling holes, including single leg spider, ceiling/bottom to glass connector and pivots, glass to glass connector, stabilizer rod, floor clamp, plastic parts, wall to glass hinge, knob, roller, floorspring (With S.S. Cover), C Shape Square SS Handle - 450mm etc. all fittings for doors/partitions (including SS fittings) required to make functional complete all as specified and directed

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each complete all as specified and directed

Taking down of shutter of any description exc. 1 Sqm & n.exc. 2 Sqm each complete all as specified and directed .

S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Rates inclusive of M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed.

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Rates inclusive of M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.

S&F for flush shutters, solid core construction, with block board core and plywood face panels, commercial type mica 0.80mm thick pasted on both sides, 30 mm thick, ISI marked, complete all as specified and directed

S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed Note: stainless steel butt hinges shall be paid separately.

Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site complete all as specified and directed

M&L for gauged shutter shall be made out of U frame 35x35x5mm, 25x25x5mm and 1.5mm thick as shown on drawing. The frame for shutter shall be of pressed steel and 10mm Square bars grill complete with fly proof wire mesh having 0.63mm nominal dia wire and 1.4mm average with aperture including two coats of synthetic enamel paint over a coat of red oxide and including taking down old doors any type with iron items complete all as specified and directed

S&F powder coated approved colour anodised aluminium partition with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame with one or more rebates including S&F 5.50 mm thick plain/tinted glass complete all as specified and directed.

S&F stainless steel sliding bolt 300mm long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed

S&F stainless steel heavy weight butt hinges 100mm in size complete all as specified and directed.

S&F aluminium anodised barrel tower bolt with bright bolt 200 mm long complete all as specified and directed

S&F aluminium anodised handles 100 mm cast type anodized complete all as specified and directed

M&L for fabrication and fixing BWP (Boiling water Proof) solid block Board 19 mm thick conforming to IS 1659- 2004 to be used ,inside depth not less than 0.50 metre. All the exposed surface which are or can be visible to be covered with 1.0 mm th. Sunmica of Approved colour, shade and finish. The surface which will come in contact with wall/ masonary/tiles etc shall be premiered with Appropriate Wood primer mixing Approved Antitermite chemical and pasting 250-micron water proof Plastic Sheet with appropriate adhesive. All the Pastings to be done with water resistant Adhesive. Any Butt joint should be strengthen with Screw and Fissures inserted with appropriate pasting compound. Shutters of storage unit to be formed out of 19 mm thick BWP ply and faced with 1.0 mm thick Sunmica. Provide shelf etc. made of 19 mm thick BWP B.B., polished to engineer-in-charge's approval. Complete Including with all necessary fittings like knobs, magnet catcher, running track for sliding, hinges any type, ball catchers, SS tower bolts 150mm , locks,SS handles 300mm long, adjustable shelves etc. as per directions of Engineer Incharge. Inside surfaces to be finished with 1.00 mm thick Sunmica and outer exposed surface with 1.00 mm th. Sunmica. Cupboard depth of 600- 750 mm complete all as specified and directed Note: 1. Rates inclusive of solid block board, adhesives, fittings/fixtures, Sunmica and plastic sheet etc and shall not be paid separately. 2. Front facing area shall only be considered for payment ) including taking down old boarding any type.

M&L for framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified and directed

M&L for preparation of new or old surface of any description over 10cm width or girth and applying two coat of synthetic enamel (by spraying) over one coat of primer complete all as specified and directed

S&F Mortise lock with set with Pair of 8100 Mortise Lever Handles, 271a lock with 55mm backset and 60mm EPC with one side thumb turn and one side key, Fire resistance BSEN 1634:1:2000 Certified Satin Finish Mortise Lock body approximate size of back set 45 mm X 85 mm, with 52 mm Lock and 26 mm brass latch , Stainless steel main & Strike plate & including back to back fixing feature suitable for minimum door thickness 30 mm Single door shutter with necessary fixings, screw as required to complete the work all as specified & directed.

S&F, in repairs, aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed

S&F mild steel 150mm size helical door spring including roller and roller plate fixed with screws to wooden chowkat or welded to steel frame, complete all specified and as directed.

S&F powder coated approved colour anodised aluminium windows side hung type with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick plain glass complete all as specified and directed.

S&F powder coated approved colour anodised aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick plain glass complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed

S&F in repairs 5mm thick hollow PVC Sheet wall Panelling (sand wiched between the longitudinal grid in PVC Sheet) any pattern fixing at site with PVC beading/fillet complete all as specified and directed

M&L for provision of GI framed work (snap grid) suitable for size as in false ceiling of size 600mmx600mmx4mm consisting of following :- i) GI sections incorporated in frame work shall conform to designation 63400 given in IS:737-1986. ii) The snap grid consist of aGI main/cross tee of size 36.5mmx25mmx1.40mm thick and 25mmx25mmx1.40mm thick respectively, iii) Snap grid frame shall be fixed to ceiling with supporting hangers consisting of Supply and fix 4mm dia mild steel GI wire iv)The main and cross tees shall be jointed at junction/crossings with GI angle bracket,of size 15mmx15mmx1.40mm thick fixed with suitable mild steel, bolts,nuts and washers all as manufacturer's instructions v) The snap grid(main/cross tee section) shall be supported at ends all along the wall with GI angle of size 25mm x 25mm x 1.4mm thick vi) Size of the snap grid shall be 605mm x 605mm and board for false ceiling will be 595x595x4mm including taking down existing ceiling with cover fillets etc complete all as specified & directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water complete all as specified and directed.

M & L for 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M&L for rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified and directed

M & L for applying 10 mm thick rendering in CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 200ml per cement bag or as per manufacturer instructions, complete all as specified and directed : Note:- Water proofing compound shall be measured and paid seprately. (upto a height of 15.0m)

Preparation of old surface after complete removal of existing treatment by mechanical equipment complete all as specified and directed

M&L for preparation of old/new surfaces of ceiling and applying Two coat of distemper oil emulsion incl priming the surface and incl 1 coat ceiling birla white putty complete all as specified and directed

M&L for applying 1mm thick wall care putty making smooth surface complete all as specified and directed.

M&L for preparation of old/new plastered surfaces of walls with Birla /JK wall care putty and applying two coats of Oil bound distemper to match the existing surfaces as required, complete all as specified & directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint on new/old surfaces of wall having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces using roller for painting complete all as specified and directed

Taking up or down steel tubing and connection 20 mm bore pipe and removing from site complete all as specified and directed

All as described srl item no 51.00 here-in-before but 25 mm bore pipe complete all as specified and directed

Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed

Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed

S&F triple layer white color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and including Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete all as specified and directed

S&F 20 mm dia PTMT ball valves with brass rod, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repairs 20mm bore PTMT float valve with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 140gms), complete all as specified and directed

S&F in repairs bib taps brass chromium plated 15 mm bore size with flange screwed down screwed for 20 mm dia pipe or for brass ferrule. Make: Jaquar OPP-CHR-15037PM or equivalent as approved complete all as specified and directed

S&F as in repairs 15 mm bore bib tap long body chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S&F brass floor door stopper body and tongue with hard drawn steel spring, fixed in floor complete all as specified and directed

S&F in repairs 15 mm dia angle cock cast copper alloy chromium plated with flange screwed down high pressure with crutch or butterfly handle, flench screwed both ends for 20mm dia pipe or for union complete all as specified and directed

S&F in repairs chromium plated Angle stop valve incl flange, any description, suitable for 15 mm bore pipe, complete all as specified and directed

S&F in repairs PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor complete all as specified and directed

S&F in repairs vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, including flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

S&F in repairs white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed.

S&F in repairs Single Piece WC With PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 360x640x685 mm including replacement of S Trap- 110 mm complete all as specified and directed

S&F in repairs vitreous china thin Rim Table Top Basin (colour as approved by GE), Size: 530x420x140 mm, Shape - Rectangular/round including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling, waste pipe, bottle trap and fixing to vanity unit complete all as specified and directed

S&F in repairs Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed

S & F in repairs Vitreous China Wall Hung Basin With Fixing Accessories, Size: 610x465x275 mm including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling, waste pipe, bottle trap and fixing to vanity unit complete all as specified and directed

S&F in repairs, PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified and directed

S&F in repairs, PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement complete all as specified and directed

S&F 600mm Long Braided Hose with M10 x 1 Nipple, 15mm Nuts, O-Ring & Rubber Washers complete all as specified and directed

S&F in repairs CP Soap Dish Holder complete all as specified and directed

S &F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed

S&F in repairs 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste complete all as specified & directed.

S&F in repairs 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes complete all as specified & directed.

S&F PVC bends 75mm bore, any radius complete all as specified & directed.

S&F PVC bends 110 mm bore, any radius complete all as specified & directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed

S&F 110 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed

S&F 110mm PVC (SWR) 'S' trap complete all as specified and directed

S&F in repairs Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia. complete all as specified and directed

S&F in repairs Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 25 mm dia complete all as specified and directed

S&F in repairs 15 mm dia brass chromium plated Central Hole Basin Mixer with Regular Spout with Popup Waste System with 450mm Long Braided Hoses fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstan head screwed for 15mm dia complete all as specified and directed

S&F in repairs 15mm dia chromium plated fancy type Bath & Shower Mixer including Telephone Shower Crutch & Shower Kit (9537N & 571), Wall Mounted for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed.

S&F 15mm dia chromium plated fancy type sink mixer with swinging spout (wall mounted model) fixing and connection to pipes complete all as specified and directed.

S&F in repairs hand Shower (Health Faucet) with 1 meter Long Easy Flex Tube in Chrome Finish & wall Hook complete all as specified and directed

S&F in repairs 15 mm dia Concealed stop cock chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union complete all as specified and directed

S&F in repairs PVC Bath cabinet with mirror 18"x22"x4.25". Make: commander or equivalent complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F Corner Glass Shelf (with Bracket) complete all as specified and directed

S&F in repairs chromium plated towel rail 450 mm long as approved quality complete all as specified and directed.

S&F in repairs SS fancy type Brackets of suitable size to fix 25mm dia SS decorated curtian rod with end knobs complete all as specified and directed. Note: 02No Bracket and 02No End knobs to be considered as one set for measurement purpose.

S & F 25mm dia Stainless steel decorated curtain rod with ring complete all as specified and directed.

M&L for 60 mm thick, interlocking paver block PCC type M-35 with grey cement & pigment, of shape approved by GE, in paths over & including 25 mm thick sand cushioning bed complete all as specified and directed

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in as in sub base of flooring, mass filling and foundations etc complete all as specified and directed

M & L for overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor) complete all as specified and directed Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account.

S&F 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes including hacking out old glass complete all as specified and directed

S&F in repairs galvanized MS wire cloth 0.45mm nominal dia of wire and average width of aperture 1.14mm and including fixed with tinned tacks, wooden beading, Metal frame for securing wire gauge with wire stappler complete all as specified and directed

M&L for repairs to anodised aluminium door shutters and make it serviceable condition including necessary joining cleats, glazing clips, ruber neoprene packing, snap beading, screws, complete all as spd and directed

S&F in repairs 12.5 mm thick tapered edge gypsum moisture resistant board (seamless type) conforming to IS: 2095- Part I. false ceiling at all heights including providing and fixing of framework made of special sections power pressed from MS sheets and galvanized with zinc coating of 120g per sqm ( both sides inclusive) as per IS 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts and bolt of required size and other end of angle hanger fixed with intermediate GI channels 45x15x0.9mm running at the spacing of 1200mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm at 450 mm centre to centre shall be fixed in a direction perpendicular to GI intermediate channel with connecting clips made out of 2.64mm dia x 230 mm long GI wire at every junction including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with help of rawl plugs at 450 mm centre with 25 mm long dry wall screws at the rate of 230 mm interval including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screw of size 3.5x25 mm at 230 c/c including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compounds in three layers covering up to 150 mm on both sides of joints and including two course of primer & Acryllic Emulsion paint suitable for board all as per manufacturer's specification and also including the cost of making opening for light fitting, grills, diffusers cutout made with frame of perimeter channels suitably fixed, all complete as specified and directed

S & F in repairs 15mm CP Two Way Angular Stop Cock with Wall Flange complete all as specified and directed

S&F in repairs Brass Butter Fly Jet Spray with 1.2 meter Long Flexible Tube of premium quality fittled to Vitreous china, wash down water closet pan, Stop cock/ angle cock complete all as specified and directed

S&F in repairs SS Toilet Roll Holder complete all as specified and directed

S&F in repairs SS Towel Ring complete all as specified and directed

S&F Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed.

M&L for rectifying the leakage of 15-20mm reducers/extension nipple/union/tee/elbows/legs/spindles etc including replacement of these items with necessary fixtures etc to make functional the same complete all as specified and directed.

M&L for repairing of old wooden doors by repairing projecting/friction type hinges,handle, bolts etc as required and providing new as required complete all as specified and directed.

S&F powder coated anodised aluminium windows /Ventilators (upto a height of 12mtr) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh shutter and glass shutter fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S& F 4.00 mm thick black glass complete all as specified and directed.

S&F in repairs stainless steel sink 1.00 mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets / fixing with RCC plate from connecting union etc. Overall size 495mm x 420 mm with bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed.

M&L for cleaning of sewage lines,manhole by jetting and well flushing the sewage lines by mechanical means after removing of sludge including taking off the manhole cover and refixing after cleaning of manhole of any size and depth. The manhole lines to be cleaned through mechanical sludge trailor and all sludge to be removed to a distance with in of 3 km outside of the cantt area.( Note. ( a ) The contractor shall provide sufficient Men and machinery everyday to cater for all type of complaints. (b) The period of complection for each complaints shall be 24 hours . (c) it will be the responsibility of the contractor to get the complaints completed with in stipulated period the labour and machinery shall be made available during the office hours for any complaints. (d) The payment shall be made contractor on the basis of complaints slips.No payment shall be done for any incomplete work . (e) The contractor to quote the rates accrodingly.

All as described srl item no 112.00 here-in-before but cleaning the blockage of WC's, toilets, kitchen, Sink complete all as specified and directed

Cleaning of sewage lines 150mm bore including man holes gully trap, grees trap etc up to 1.50m deep by removing all silt, foreign material and other deposits what so ever completely and making the lines free from all obsticles and testing the flow of sewer line evenly, smoothely by filling water the operator will carried out in suitable length by blocking the first and last man hole of path and removing the silts/edge out of defence land complete all as specified and directed

Dewatering of Soak well/pit/septic tank any size/capacity by discharging the sewage water into a sealed tanker with hanze pipe system including vehicle, complaint and disposing within 3KM outside cantt area complete all as specified and directed

Excavation and getting out of sludge from septic tank and soak well in any depth by any means and removing to the distance up to 3 kms out side cantt area and deposited in approved lying areas complete all as specified and directed

M&L for Screed bed or bedding layer of mortar 20 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed

M&L for Glass mossaic tiles on finished plain wall surface of size 200 mm x 200 mm x 4 mm (or thickness as specified by the manufacturer) in all colour, design, fixing in customized design as per direction of Engineer-inCharge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same for swimming pool/fountains complete all as specified and directed

M&L for ultra charged vitrified tiles 10-12mm thick (or thickness as specified by manufacture), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.72 Sqm (as approved by GE) in flooring set and jointed in premium epoxy grout (Kajaria KE-100 or equivalent) to match the colour of tiles and including bedding of average thickness 6mm thick premium tile adhesive kajaria CX-1 or equivalent for laying of tiles on brick/concrete surface complete all as specified and directed Note: Rates Inclusive of Premium epoxy grout, premium tile adhesive and shall not be paid separately.

All as described srl item no 119.00 here-in-before but as in skirting complete all as specified and directed.

M&L for preparation of old/new surfaces of ceiling and applying Two coat of distemper oil emulsion incl priming the surface and incl 1 coat ceiling birla white putty complete all as specified and directed

M&L for applying 1mm thick wall care putty making smooth surface complete all as specified and directed.

Dismantling asbstos cement ( corrugated, semi corrugated sheet etc) sheet in roof coverings complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering/claddding to wall, fixed with self tapping screws complete all as specified and directed

S&F in repairs pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, as in ridges fixed with self tapping screws complete all as specified and directed

M&L in repairs for Type B0 1:2:4 (12.5mm graded aggregate) Providing precast cement concrete louvres and jallies, 65-70mm thick (measured solid) including reinforcement, Set in cement mortar 1:4 complete all as specified and directed.

S&F Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed.

M&L for rectifying the leakage of 15-20mm reducers/extension nipple/union/tee/elbows/legs/spindles etc including replacement of these items with necessary fixtures etc to make functional the same complete all as specified and directed.

M&L for repairing of old wooden doors by repairing projecting/friction type hinges,handle, bolts etc as required and providing new as required complete all as specified and directed.

S&F vitreous china urinal, half stall type white, with grating, union for discharge pipe, flush pipe and waste pipe, CP urinal spreader fixed to water supply pipe etc including fixing of plugs bedding against wall in CM 1:2 complete all as specified & directed.

S&F powder coated anodised aluminium windows /Ventilators (upto a height of 12mtr) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh shutter and glass shutter fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S& F 4.00 mm thick black glass complete all as specified and directed.

S&F in repairs stainless steel sink 1.00 mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets / fixing with RCC plate from connecting union etc. Overall size 495mm x 420 mm with bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed.

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed

M&L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, sheathed, copper conductor cable in and including PVC concealed conduit of not less than 20mm dia complete with all accessories/fittings, brass screws, washer etc, including modular boxes, modular plates suitable for fixing modular switches/sockets and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, sheathed and connected to common earth and earth duly complete all as specified and directed for the followings :-

All as described srl item no 134.00 here-in-before but one tube light/Bulb/ ceiling fan/ exhaust fan/ security light point controlled by one, one way switch 05 / 06 Amps.

All as described srl item no 134.00 here-in-before but one 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as described srl item no 134.00 here-in-before but one 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as described srl item no 134.00 here-in-before but one Bell point controlled by one, one way switch 05 / 06 Amps.

All as described srl item no 136.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

All as described srl item no 136.00 here-in-before but with 4 Sqmm nominal cross sectional area copper conductor cable for sheet metal enclosure.

S&F Modular Switch, 1 module, 6A, AC, 240V, one way complete all as specified and directed.

S&F Modular Socket, 2 module, 6A, 2/3 pin combined, AC, 240V, complete all as specified and directed.

S&F Modular Socket, 2 module, 6A / 16A, 2/3 pin combined, AC, 240V, complete all as specified and directed.

S&F Modular Switch, 1 module, 16A, AC, 240V, one way complete all as specified and directed.

S&F Modular Bell Push, 1 module, 6A, AC, 240V, complete all as specified and directed.

S&F Bell,AC , 230 volts ,Single pole complete all as specified and directed.

S&F of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

S&F lamp holder (Angular / Straight), insulated body, with back plate complete all as specified and directed.

Supply and fixing LED lamp 2 pin 9/10 watt complete all as specified and directed.

S&F LED light fitting 1x20/22 watt,220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting mirror type with high output diffuser 2 feet,10 watt 220V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copeer conductor cable of suitable size complete all as specified and directed.

S&F wall fancy light fixture made up of polycarbonate including 8 to 10 watt LED lamp complete all as specified and directed.

S&F 1x35 watt LED Building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of suitable dia GI pipe medium grade including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting complete all as specified and directed.

S&F LED Recess mounted, ceiling panel, 2'x2', 36 watts, 240V light fitting with heat exchanger unit complete all as specified and directed.

M&L for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including taking down old u/s wiring & incl all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed.

S&F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

S&F MCB, SP, AC, 240 volts 'C' curve capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

S&F Double pole Isolator 240V, 40A, and making connections complete all as specified & directed.

S&F VTPN DB, 4 way, 415 V, double door type suitable for mounting incoming MCCB and outgoing MCB’s double pole/single pole,complete all as specified and directed.

S&F in repairs, 4P MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 16KA , ISI Marked, and making connections complete all as specified & directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed. NOTE:- inclding main earthing GI wire from earth electrode to test point upto 7.5 metres.

S&F Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, RPM 1200, copper winding of sweep 250mm , Old fan deposited to MES Yard, complete all as specified and directed.

S&F fan ceiling complete with blades, down rods, electronic regualtor and accessories ,230V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE rated with Brushless direct current motor (BLDC) complete all as directed., Old fan deposited to MES Yard, complete all as specified and directed.

Taking down existing ceiling fan/Wall fan of any size, CeiIing cable end,dismentalling blades ,make one set of three blades and keep them safe to deposited to E/M yard complete all as specified and directed.

Taking down existing exhaust fan of any size and keep them safe to deposited to E/M yard complete all as specified and directed.

S & F and grouting in wall sheet metal enclosure factory fabricated with single pole & neutral with a two pin and earth plug top and socket complete with one single pole MCB 20 Amps 240 volts complete all as specified and directed.

Supply and laying orf ixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm 2 core, nominal cross section in service connections complete all as specified and directed.

Supply and laying GI pipe 40 mm bore medium grade with all fitting laid in trenches/ under road /floor/ pole/ wall for protection of cable including , clamping of pole/wall in proper size of clamps, nut bolt ,and washer etc complete all as specified and directed.

S.P CONSTRUCTION CO. (BID ID -3486370)

A.V. ASSOCIATES (BID ID -3486972)