PROVN OF HARDSTANDING AND VEH PARKING SHED FOR 10 x B VEH AT ESCORT LINE OF COD JABALPUR UNDER GE (E) JABALPUR

Amount

Excavating over areas, n exc 1.5 m deep and getting out in soft soil complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out in any type of soil complete all as specified and as directed.

Removing excavated material n exc 50m and depositing where direct at a leven n exc 1.5m above the starting point complete all as specified and directed.

Maroom/red bajri filling in floors or pavings, laid in layers n exc 15 cm thick spread, levelled and rammed including watering complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M&L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate as subbase of floor as specified and directed.

M&L 150mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in hardstanding horizontal or sloping or vertical incl necessary inclg necessary formwork finished even and smooth without using extra cement complete all as specified and directed.

Forming 12mm thick expansion joints filled with pre-formed bituminous filler & top 30mm primed & sealed with sealing compound, Grade `B' Thickness of concrete slab 150 mm complete all as specified and directed.

M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L RCC M-25 design mix using 20 mm graded aggregate as in Foundations, including rafts footings, plinth beams; bases for columns, etc complete all as specified and directed.

M&L RCC M-25 design mix using 20mm graded aggregate in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC M-25 design mix using 20 mm graded aggregate in Beams, chajja etc complete all as specified and directed.

Formwork to rough finished flat sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beam with required filler etc complete all as specified and directed.

Formwork to rough finished flat sides of pillars, posts, struts, piers, columns, and stanchions with required filler etc complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to Fe-410 -0 or Fe 410-S complete all as specified and directed.

Same all as item No 17 above but 5 mm and over upto and including 10 mm dia as in stirrups or spacers complete all as specified and directed.

S&F Rolled mild steel Roof trusses (framed), trussed purlins crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. GDE Fe290-0 (Gde-165) complete all as specified and directed.

S&F rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates etc (cut to ordinary lengths i.e within 20mm of the length indicated) GDE Fe 410-O W (Gde E-250) quality 'A' complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for applying three coats of white was on new wall surface inclding preparation of surface complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise described over 10cm width or girth including preparation of new surface and applying one coat of red oxide, zinc chrome complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5 cm & n exc 30cm long of 20 mm dia complete all as specified and directed.

M&L for RCC hume class NP-3 150 mm Dia laid and jointed all as specified and directed

S&F Hand rails, half round or ther stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts ; posts & struts in fencing including cuttint tips to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc & similar work conforming to GDE (E-165) Fe 290-0 complete all as specified and directed.

S&F Rolled mild steel Plates (plain or chequered) channels. Square cut or notched (ordinary & counter sunk) forming holes, without any attachment gusset plates riveting etc n exec 10 kg each for brackets conforming GDE( E-165) Fe290 complete all as specified and directed.

Schedule of credit amount of Rs. 0.00 to be deducted during AOC

G S CONTRUCTIONS

RAVINDRA ELECTRICAL

M/S N K SONKAR

M/S BHATIA CONSTRUCTIONS

LAL SINGH & SONS

M/S BHARTI ENTERPRISES

M/S Modern builders

M/s Ram Associates

M/S CHANDER MUNI