White Washing, Distempering and Painting in Factory and Township

For Township

White washing with lime to give an even shade

New work (Three or more coats)

Old work (One or more coats)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's

New work (two or more coats) over and including water thinnable priming coat with cement primer

Old work (one or more coats)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:

One or more coats on old work

Finishing walls with water proofing cement paint of approved manufacturer of any of the companies mentioned at clause No.3.7 of Technical terms and conditions to give an even shade.

New work(Two or more coats applied @ 3.84 Kg/10 Sqm

Old work (One or more coats applied @ 2.20 Kg/10 Sqm

Applying priming coat with ready mixed pink or greyprimer / red oxide steel primer of approved manufacturer of any of the companies mentioned at clause No. 3.7 of Technical Termsa and conditions on wood work (hard and softwood)/ steel work

Applying one coat of cement primer of approved manufacturer of any of the companies mentioned at clause 3.7 of Tehnical Terms and conditions on wall surfaces.Cement primer.

Painting with synthetic enamel paint of approved manufacturer of any of the companies as mentioned at clause No.3.7 of Technical Terms & Conditions in all shades to give an even shade.

a) New wood work (two or more coats).

b) Old wood work (one or more coats).

Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete.

French spirit polishing Two or more coats on new work /old work Including

Painting the flower pots of all sizes with ready mixed enamel paint in shades to give a smooth finish area upto 0.50 m2

White washing with lime over stem of trees of all sizes upto required height and area upto 2.0 sq.m.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface of following brand / Manufacture i) Apex of Asian Paint. ii) Excel of Nerolac Paint. iii) Weather Coat Smooth of Berger Paint. iv) Weather Shield of Dulux paint.

Supply of Acrylic distemper 1st quality , having VOC content less than 50 grams/ litre

Supply of Premium plastic acrylic emulsion of interior grade, having VOC content less than 50 grams/ litre

Supply of lime

PART B

Execution of any job non-susceptible to measurement (less than0.5 Sqm)which includes Minor repair /unforeseen Township& plant requirements / for making arrangements for organizing various functions all minor consumable material, tools and tackles and the payment shall be on basis of working hours (Major consumable / material shallbe paid in relevant items and the decision of the Engineer-in-Incharge in this regard shall be final.)

Semi Skilled jobs

Un-skilled jobs

For Factory

White washing with lime to give an even shade

New work (Three or more coats)

Old work (One or more coats)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's

New work (two or more coats) over and including water thinnable priming coat with cement primer

Old work (one or more coats)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:

One or more coats on old work

Finishing walls with water proofing cement paint of approved manufacturer of any of the companies mentioned at clause No.3.7 of Technical terms and conditions to give an even shade.

New work(Two or more coats applied @ 3.84 Kg/10 Sqm

Old work (One or more coats applied @ 2.20 Kg/10 Sqm

Applying priming coat with ready mixed pink or greyprimer / red oxide steel primer of approved manufacturer of any of the companies mentioned at clause No. 3.7 of Technical Termsa and conditions on wood work (hard and softwood)/ steel work

Applying one coat of cement primer of approved manufacturer of any of the companies mentioned at clause 3.7 of Tehnical Terms and conditions on wall surfaces.Cement primer.

Painting with synthetic enamel paint of approved manufacturer of any of the companies as mentioned at clause No.3.7 of Technical Terms & Conditions in all shades to give an even shade.

a) New wood work (two or more coats).

b) Old wood work (one or more coats).

Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete.

French spirit polishing Two or more coats on new work /old work Including

Painting the flower pots of all sizes with ready mixed enamel paint in shades to give a smooth finish area upto 0.50 m2

White washing with lime over stem of trees of all sizes upto required height and area upto 2.0 sq.m.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface of following brand / Manufacture i) Apex of Asian Paint. ii) Excel of Nerolac Paint. iii) Weather Coat Smooth of Berger Paint. iv) Weather Shield of Dulux paint.

Supply of Acrylic distemper 1st quality , having VOC content less than 50 grams/ litre

Supply of Premium plastic acrylic emulsion of interior grade, having VOC content less than 50 grams/ litre

Supply of lime

PART B

Execution of any job non-susceptible to measurement (less than0.5 Sqm)which includes Minor repair /unforeseen Township& plant requirements / for making arrangements for organizing various functions all minor consumable material, tools and tackles and the payment shall be on basis of working hours (Major consumable / material shallbe paid in relevant items and the decision of the Engineer-in-Incharge in this regard shall be final.)

Semi Skilled jobs

Un-skilled jobs

Please Enable Macros to View BoQ information