REPAIR TO BOUNDARY WALL HARDSTANDING PATHWAY DRAIN FENCING AND CONNECTED WORKS AT HASTINGS AREA UNDER GE (CENTRAL) KOLKATA

Amount

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debries/ rubbish, etc., complete all as specified and as directed.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling of stone slabs and tiles laid,bedded and pointed in any mortar of any description or thickness in floors, aprons etc all as directed by Engineer-in-charge.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Dismantling Wrought Iron or Mild Steel Work, viz. MS Flat Iron (Wind Tie) and Similar Work including MS Bolts, Nuts, etc., complete all as specified and as directed.

M&L Plain Cement Concrete type D2 (1:4:8) using 40 mm graded aggregate as in Foundation, Filling and Mass Concrete, complete all as specified and as directed.

M&L Plain Cement Concrete type C1 (1:3:6), using 20mm graded crushed stone aggregate as in surface channels and drains complete all as specified and as directed.

M&L Plain Cement Concrete type C-1, (1:3:6) (20mm graded crushed stone aggregate) as in Coping ,block benching,channeling slightly rounded or chamfered angle and throating including form work and finishing all exposed faces of cement concrete complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc complete all as specified and as directed.

Add or deduct to above for each 25 mm girth or part there of over or under 30cm etc complete all as specified and as directed.

S&F 35mm thick precast cement concrete Type (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) louvers and jallies including all moulding, but excluding frame set in cement morter 1:4 complete all as specified and as directed.

M&L Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in Cement Mortar 1:4, complete all as specified and as directed.

Labour only Brick Work using old bricks obtained from demolition, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed.

M&L Mild Steel Plain Black Sheet 1.6mm thick in Hearths, covering to Door Shutters, covering to Door Chowkats (Frames), Water Tanks, etc. cut to size edges beaded if directed, holes punched including round headed Screws Clout Nails or Rivets and fixed to Wood or Steel Members, etc., with plain 40 mm Lap Joints or welded/riveted Seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required, complete all as specified and as directed.

M&L Framed work as in doors or gates of angles or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing complete Fe 410 -w(Gde E-250) quality B) complete all as specified and as directed.

S&F Mild steel angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut of 11 to 15mm dia, and 5cm to 10cm long complete all as specified and directed.

Fixing only PVC coated chain link fencing mild steel galvanised 3.00mm dia (minimum weigth 3Kg/Sqm) of wire and spacing 75mm x 75mm including line wires to any standards, rails and straining bolts including provision of binding wire complete all as specified and directed. Note :- Line wire ,binding wire and bolts/nuts shall be measured and paid separetaly under relevant item of BOQ

M&L Mild steel round Bars 8 mm dia , cut to length, bent to shape required including crank-ing, bending and binding with galvanised Steel Wire not less than 0.90 mm and staple as in line wire complete all as specified and as directed.

Supply only PVC coated chain link fencing mild steel galvanised 3.00mm dia (minimum weigth 3Kg/Sqm) of wire and spacing 75mm x 75mm including 8mm dia round bar as in line wires to any standards, rails and straining bolts including provision of binding wire complete all as specified and directed.

M&L Cement Concrete type C2 (1:3:6) using 40mm graded crushed stone aggregate 75mm thick as in Plinth Protection, etc. laid in alternate Bays, finished Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Prepolished Coloured Cement Concrete designers Chequered Tiles 300 x 300x 25 mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles complete including 15 mm screed bed in CM (1:6) of thickness complete all as directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 50 mm sand cushion over rammed earth complete all as specified and as directed.

Labour only for fixing Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 100 mm sand cushion over rammed earth complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

S&F RCPC (Reinforced Cement Polymer Concrete) drain cover slab of size 750mm x 450mm x 75mm thick, of capacity 5 MT placed in proper position as in repair complete all as specified and as directed.

M&L Glazed Ceramic Coloured Tile 300x200 x 7.0mm thick/ 450x350x7mm on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:3) complete all as specified and as directed.

M&L Granite (of any type) Work (Table rubbed and polished) 18 to 20 mm thick, in Steps, Cooking Platforms and like, Set in Screed bed of 20mm thick in Cement Mortar 1:4 including Pointing in White Cement 1:2 using Marble Dust with admixture of Pigment to match with Shade of Granite including Cutting and Polishing including half round edges, complete all as specified and as directed.

M&L Rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished the surfaces even and fair without using extra cement complete all as specified and directed

M&L Rendering 15mm thick in CM (1:4) on other than fair faces of brick work or concrete surfaces finished the surfaces even and fair without using extra cement complete all as specified and directed

M&L Preparing new Surfaces of Walls and applying Two Coats of Exterior Emulsion Paint over a coat of primer (as per Manufacturer’s instructions), complete all as specified and as directed.

M&L Preparing new Surfaces of Walls and applying Two Coats of Cement Based Paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L Preparing old decorated plastered surfaces of Walls and applying One Coat of Cement Base Paint complete all as specified and as directed.

M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.

M&L Preparing old Steel Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

Cleaning of existing cover/uncovered drains of any section and depth removal of sludge, rubbish and other foreign material and flushing with adequate quantity of water and deposit the sludge to a distance not exc. 50m complete all as specified and directed by Engr-in -Charge

UNIVERSAL TRADING CENTRE

S C ROY AND CO

M/s Santosh Industrial Corporation

M/S J S ENTERPRISES

MASTER BUILDERS

MS HORIZEN

RANJIT KUMAR HALDER