Loading
Loading…
Loading…
Tender Value
₹6.5 Cr
EMD Value
₹4.7 L
Closing Date
17 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (WMS)
Above/Below/Par
BADNERA WS
13 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria:(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. Definition of Similar Nature of work: Any work pertaining to manufacturing /repair/modification of air brake system of railway rolling stock under Indian Railways, Production Units under Ministry of Railways or Public sector Undertakings. Work may have been done through a works contract or stores contract.
8 conditions · 3 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Document attached: Tender Document
If any discrepancy is found out at any stage between NIT and Tender Document, the conditions in the NIT shall prevail.
Work of Stripping, Dismounting, Cleaning, Transportation, Overhauling & Fitment of Airbrake and under gear components in Air Brake shop with supply of Material of 1200 Wagons (BOXN, BOXNHL (Both Conv. And BMBS Type), BLC and BRN) for a period of 12 months at Wagon Repair Workshop, Badnera.
BD-WRB-41-AIR-BRAKE~CR
BD-WRB-41-AIR-BRAKE
Open
Works - General
12 Months
Mumbai, Maharashtra
₹0
₹4.7 L
17 Mar 2026
10 Feb 2026
3 Mar 2026
162 items across 2 schedules · ₹4,76,00,657.67 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | POH KIT for Cut off angle cock with vent consisting of 4 items confirming to Appendix-D of RDSO Specn:02-ABR-02, Amendment No.3 of April 2010. Sl N0:[1]ORing - RDSO Drg NO/Item No:WD-88123-S-02, Item-5, Alt-6, Qty Per Kit-1. [2]O" Ring - RDSO Drg NO/Item No:WD-88123- S-02,Item-6, Alt-6, Qty Per kit:2. [3]Seat - RDSO Drg NO/Item No:WD-88123-S-02, Item-7, ALT-6, Qty Per Kit-2. [4]Spring - RDSO Drg No/Item No:WD-88123-S- 02,Item:8, Alt:6, Qty per Kit:1 | Set | 4800.00 | 36.58 | 1,75,584 |
| 2 | Cut off angle cock with vent [complete] for air Brake wagons to RDSOs Drg. No. WD-88123/S- 01, Alt. No. 2[Two] or latest and RDSOs Drg. No. WD-88123/S-02, Alt. No. 6[six] or latest. TO RDSO SPECN. NO. 02-ABR-02 WITH AMENDMENT NO. 4 OF JUNE 10 OR LATEST.THIS ITEM IS RESERVED FOR PROCUREMENT FROM RDSO APPROVED SOURCES ONLY. | Numbers | 640.00 | 838.98 | 5,36,947.2 |
| 3 | Dirt Collector Assembly to RDSO's Drg, No. WD- 92051-S-03, Alt.- 4 and Specn. No. 02-ABR-02 [Appendix E] with Amendment no. 4 of Sept. 2016 | Numbers | 333.00 | 1,118.64 | 3,72,507.12 |
| 4 | KIT FOR DIRT COLLECTOR CONSISTING OF 06 ITEMS. 1]DRAIN PLUG TO RDSO DRG. NO. WD- 92051-S-05 ALT-5, ITEM NO. 2, QUANTITY 1 NO. 2]LEATHER WASHER TO RDSO DRG. NO. WD- 92051-S-05 ALT-5, ITEM NO. 5, QUANTITY 6 NOS. 3]GASKET TO RDSO DRG. NO. WD-92051- S-05 ALT-5, ITEM NO. 4, QUANTITY 6 NOS. 4]FILTER TO RDSO DRG. NO. SK-97005 SHEET 2 ALT-2, ITEM NO. 3 AND 4, QUANTITY 6 NOS. 5]TEE HEAD BOLT TO RDSO DRG. NO. WD- 92051-S-05 ALT-5, ITEM NO. 8, QTY. 2 NOS. 6]HEX NUT TO RDSO DRG. NO. WD-92051-S-03 ALT-4, ITEM NO. 9, QTY. 2 NOS. MATERIAL AND SPECIFICATION AS PER DRAWING | Set | 400.00 | 346.92 | 1,38,768 |
| 5 | POH KIT FOR WELDED AND SWIVEL FLANGE FITTING CONSISTING OF 2 ITEMS (RDSO DESIGN) CONFIRMING TO RDSO SPEC.NO.04- ABR-02.AMEND-6. 1).Gasket 32mm NB to RDSO DRGT.No.WD-83062- S-07 ALT 5OR LATEST. ITEM 1,QTY/KIT 9 NOS., 2). GASKET 20mm NB to RDSO DRGT.No.WD-83062-S-07 ALT 5 OR LATEST.ITEM 1 ,QTY/KIT 16 NOS | Set | 1200.00 | 125.25 | 1,50,300 |
| 6 | POH KIT FOR CHECK VALVE OF AIR BRAKE WAGONS HAVING TWIN PIPE SYSTEM CONSISTING OF 04 ITEMS, CONFIRMING TO RDSO SPECIFICATION NO.02-ABR-02 AND RDSO DRG. NO. SK-98111 ALT-01 S.No Name of Parts RDSO Drg.Sketch 98111 Alt.No.01 Qty (No)1 Filter Item No.-2 01No2 Valve Sealing Ring Item No-4 01No3 Compression Spring Item No-6 01No4 Sealing ring Item No.-7 01 no | Set | 1200.00 | 128.62 | 1,54,344 |
| 7 | Check Valve Assembly for Air Brake Coaches to RDSO SK-98112 Alt-Nil and C.Rly. Alt-a. Material & Specification : RDSO Spec. No. 02-ABR-02, Amendment No. 4 of September 2016 & Appendix-I. | Numbers | 360.00 | 619.48 | 2,23,012.8 |
| 8 | POH Kit for Isolating Cock (Ball type) consisting of 03 items (i) Seat Ring to RDSO Drg. No. SK- 97003 Item No.4 Alt- 5 Qty.02Nos. /Set., (ii) Sealing Washer to RDSO Drg. No. SK-97003 Item No.5 Alt- 5 Qty.01No/Set., (iii) Gland Packing to RDSO Drg. No. SK-97003 Item No.8 Alt- 5 Qty.02Nos. /Set as per RDSO Specification No. 02-ABR-02 with Appendix-I, Suitable to fitment of Isolating Cock without vent (RDSO Drg. No. WD-830062-S-04 Alt-2 or Latest) & Isolating Cock with vent (RDSO Drg No. SK- 98013 Alt. Nil or Latest) during POH. The material is reserved to be procured from RDSO approved vendors only. | Set | 2400.00 | 42.48 | 1,01,952 |
| 9 | ISOLATING COCK OLP TYPE WITH VENT HOLE FOR BRAKE CYLINDER ONLY [BALL TYPE] TO RDSOS SK. 98013, ALT-NIL.MATERIAL AND SPECIFICATION AS PER DRAWING.THIS ITEM IS RESERVED FOR PROCUREMENT FROM RDSO APPROVED SOURCES ONLY. | Numbers | 290.00 | 495.54 | 1,43,706.6 |
| 10 | Isolating cock without vent to RDSO Drg. No. WD-83062-S-04 Alt. 3 conforming to RDSO Spec. 02-ABR-02 with Amend. No%u2019s 4 & Appendix-I. | Numbers | 360.00 | 501.5 | 1,80,540 |
| 11 | POH KIT for D.V. KEO Type to DRG.NO. EK/KD CONSISTING OF 48 ITEMS as per enclosure. Description/NOs 1)-Filter -1no,2-Sealing Ring- 1no ,3-Valve Plate-1no ,4-O Ring-1 NOs, 5).Diaphragm -1 Nos, 6).Seal-1 Nos, 7).Grooved Ring -2 Nos ,8).Seal-1 Nos , 9).Sealing Ring-1 Nos , 10).Diaphragm-1 Nos,11).Valve Head-3 Nos ,12).Grooved Ring-4 Nos , 13).Flat Sealing Ring 1 Nos ,14). Flat Sealing Ring -1 Nos 15).Sealing Ring-1 Nos , 16).Sealing Ring -1 Nos 17).Flat Sealing Ring -3 Nos 18).Grooved Ring - 2 Nos 19).Control Sleeve- 1 Nos 20).K-Ring-1 Nos 21).Supporting Ring -1 Nos 22).Valve plate -1 Nos 23).Toothed Ring -2 Nos 24). Valve Head -1 Nos 25).Diaphragm -1 Nos 26).Fine Filter S.A -1 Nos 27).Flat Sealing Ring -1 Nos 28).Seal-1 Nos 29).Sealing Ring-2Nos 30).Diaphragm -1 Nos 31).K-Ring -Nos 32).Grooved Ring -1 Nos 33).Flat sealing Ring-1 Nos 34).Valve Rod -1 Nos 35).Sealing Cap-1 Nos 36).Flat Sealing Ring -1 Nos 37).Seal -1 Nos 38).Flat Sealing Ring-1 Nos 39).Valve Tappet -1 Nos 40).Sealing Ring-3 Nos 41).Seal -1 Nos 42).O-Ring -1 Nos 43).Filter -1 Nos 44).Fine Filter -5 Nos 45).Exhaust Plug -5 Nos 46).Sealing Ring 10x13.5-1 Nos 47).External Circlip -1 Nos 48).External Circlip 5x0.6-1 Nos Knorr Bremse Drg.No./Escort Part No.Respectively 1) 4A95867/4 2)4A27763/13/5 3)4B58167/10 4)4A27763/14- 12 5)4B67908/16 6)3B67907/19 7)4A18294/8 -25 8)4A30826/26 9)4A27763/12-27 10)4A26918/31 11)4A30509/33 12)4A18294/17-35 13)4A31340/1-36 14)4A31340/9-42 15)4A27763/15-44 16)4A27763/16-46 17)4A31340/3-47 18)4A18294/5-49 19)4B58169/53 20)N894/06-54 21)4A88407/55 22)4B58168/56 23)4A86235/2-57 24)4A31334/65 25)3A30507/69 26)4B63336/72 27)4A31340/2-75 28)3B69999/77 29)4A27763/9-85 30)4A30487/99 31)4B53653/101 32)4A18294@47'45g10!41@4A31340/8-127 34)3B64806/129 35)4B25854/133 36)4A31340/12-140 37)4A31653/142 38)4A31340/14-148@10'41@3B64808/149 40)4A27763/10-170 41)3B28281/174 42)4B83718/KI-263 43)4B40415/264 44)4B62338-00/82 45)4A34520-05/81 46)457290/120 47)450942/95 48)450939/102 | Set | 1200.00 | 2,782.44 | 33,38,928 |
| 12 | QRV KIT FOR KEO TYPE DISTRIBUTOR VALVE COTAINING 15 ITEMS AS PER LIST ATTACHED. | Set | 290.00 | 882.64 | 2,55,965.6 |
| 13 | Set of Application Choke (1.42mm) and Release Choke (1.52mm) for BMBS type wagons DistributorValve (KEO type) | Set | 360.00 | 265.5 | 95,580 |
| 14 | A Set of Application Choke & Release Choke For KE2 Type Distributor Valve Conforming to RDSO Spec. No. 02-Abr-02 with Amendment-4 of Sept- 2016. Specification as per Annexure attached. | Set | 120.00 | 293.82 | 35,258.4 |
| 15 | A SET OF APPLICATION CHOKE FOR KEO TYPE DISTRIBUTOR VALVE CONFORMING TO ESCORT PART NO-175 OR KNORR BREMSE PART NO- A31259/18K1, QTY=1NO, AND RELEASE CHOKE FOR KEO TYPE DISTRIBUTOR VALVE TO ESCORT PART NO-172 OR KNORR BREMSE PART NOA31657/19K1 | Set | 720.00 | 233.64 | 1,68,220.8 |
| 16 | SPRING KIT FOR KEO TYPE DISTRIBUTOR VALVE CONSISTING OF 15 ITEM,CONFIRMING TO RDSO SPEC.NO.02-ABR-02 WITH APPENDIX- A | Set | 360.00 | 531 | 1,91,160 |
| 17 | R charger Sub assembly complete KBI pt. no. KD-203 or R Charger with isolating valve EK part nos. 203 | Numbers | 200.00 | 4,425 | 8,85,000 |
| 18 | Bottom Cover with Quick Release Valve Confirming to Appendix-A1 of RDSO Spec. No. 02-ABR-02, Amendment No.3, to Escorts part No. 202 or Knorr-Bremse Part No. KD-202. | Numbers | 200.00 | 4,034.42 | 8,06,884 |
| 19 | QUICK RELEASE VALVE HANDLE ASSLY CONSISTING OF : [A] SPLIT PIN ESCORT PT. NO.105 OR KNORR PT. NO.KD-105 - QTY.- 01 NOS. [B] WASHER ESCORT PT. NO. 106 OR KNORR PT. NO. KD-106 - QTY.- 01 NOS. [C] PIN ESCORT PT. NO. 107 OR KNORR PT. NO. KD-107 - QTY.- 01 NOS. [D] HANDLE ESCORT PT. NO. 108 OR KNORR PT. NO. KD-108 - QTY.- 01 NOS. | Set | 400.00 | 115.64 | 46,256 |
| 20 | Choke cover housing SA CI (consist of - 171,173 & 176) to Part No 428 in Escorts Maintenance Manual MM-AB/DV-KEO/1/2/-001.confirming to RDSO Spec. no. 02-ABR-02 with amndt. No 4 of Sept- 2016. | Numbers | 120.00 | 2,076.8 | 2,49,216 |
| 21 | Overhauling Rubber kit for C3W design distributor valve consisting of 42(fortytwo) items as per annexure attached. | Set | 240.00 | 4,081.62 | 9,79,588.8 |
| 22 | RUBBER AND SPRING KIT for SANDWITCH PIECE AND ISOLATING COCK ASSEMBLY FOR C3W/C302 D.V. TO FTIL PT.NO. 790603101 AND 79063103 CONSISTING OF 3 ITEMS [1] O-RING FTIL PT.NO. 603701000 QTY/KIT-2 [2[2 VALVE FINISHED FTIL PT.NO. 603401000 QTY/KIT-1 [3] SPRING FTIL PT.NO. 603805000 QTY/KIT-1 | Set | 250.00 | 442.5 | 1,10,625 |
| 23 | ADOPTER WITH ISOLATING COCK ASSEMBLY FOR C3W DISTRIBUTER VALVE [MODIFIED] ACCORDING TO FTIL PART NO.-602001100 | Numbers | 24.00 | 6,342.5 | 1,52,220 |
| 24 | Lower cover sub assembly with lever protection cap nut(modified) for C3W type Distributor Valve for freight stock, make faively part No. 501102100 or greysham part No. 78794701 ,assembly consist of 9 items as mentioned in annexure. | Numbers | 40.00 | 8,438.18 | 3,37,527.2 |
| 25 | Set of Release Choke Assembly for overhauling of C3W DV:1. Release Choke (Greysham part no : GI/C3W/ 190102-55 or Faiveley part no : 501445000)-1 Nos, 2. Dust Protector (Greysham part no: GI/C3W/190102-93 or Faiveley part no : 501720000)-1 Nos 3. Release choke holder (Greysham part no : GI/C3W/ 190102-92 or Faiveley part no:501604000)-1 Nos.. As per the RDSO Specification No.-02- ABR-02 with Appendix-A1 | Set | 240.00 | 539.26 | 1,29,422.4 |
| 26 | DUST CAP WITH SPLIT PIN FOR PRESSURE TRANSFORMER DU-IIIA OF KE-2 TYPE DISTRIBUTOR VALVE AS PER RDSO SPEC.NO. 02-ABR-02 WITH AMENDMENT NO. 4 OF SEPT. 2016 AND APPENDIX-A1 & A2 TO ESCORTS PART NO. 338 & 340 OR KNORR BREMSE PART NO. A68108/KI & A450593/KI. | Pair | 120.00 | 143.96 | 17,275.2 |
| 27 | POH Kit for Pressure Transformer DU 111A PART NO 300 OF ESCORTS MANUAL. One set consisting of 20 items and quantity in 01 set as per Annexure-A, make/brand - ESCORTS or Equivalent | Set | 120.00 | 3,930.58 | 4,71,669.6 |
| 28 | Spring kit for KE2 TYPE DISTRIBUTOR VALVE [DV WITH PRESSURE TRANSFORMER DU 111-A] CONSISTING OF 18 ITEMS. TECHNICAL SPECIFICATION AS PER ANNEXURE-1 CONFORMING TO RDSO SPECIFICATION NO. 02- ABR-02. | Set | 50.00 | 649 | 32,450 |
| 29 | POH KIT FOR C3W2 DISTRIBUTOR VALVE CONSISTING OF 61 ITEMS AS PER ANNEXURE-A FOR BLC/BOBRN/BOBYN WAGON CONFORMING TO RDSO SPEC.NO.02-ABR-02 WITH AMENDMENT No.-2 AND APPENDIX A1 & A2. | Set | 20.00 | 7,529.58 | 1,50,591.6 |
| 30 | SPRING KIT FOR C3W2 TYPE DISTRIBUTOR VALVE CONSISTING 0F 20 ITEMS AS PER ANNEXURE-1 CONFORMING TO RDSO SPECIFICATION No.02-ABR-02. | Set | 10.00 | 1,686.22 | 16,862.2 |
| 31 | Spares of APM ( EL@45<41@ consisting of 23 items AS per PDF attached | Set | 360.00 | 6,230.4 | 22,42,944 |
| 32 | Auxiliary reservoir for APM (6.6 Liters) for EL-60 valve to KBI part No. I.3.5115 conforming to RDSO specification No. WD-23-BMBS-2008 (Rev.1) with Amendment-1 of Sept. 2016 | Numbers | 38.00 | 2,596 | 98,648 |
| 33 | POH KIT FOR APM ESCORTS MAKE or Equivalent (Suitable for Escort Design) CONSISTING OF 7 ITEMS AS PER ANNEXURE-A ATTACHED TO RDSO SPEC No. WD-23-BMBS Rev-1 Amndt-1 of Sept. 2016 & ESCORTS DRG. No. RED-RD-BS- 019-OM-01 | Set | 80.00 | 3,793.7 | 3,03,496 |
| 34 | Set of Spares of BMBS consisting 02 items 1.) O-RING KBI PART NO 1.4.1050, QUANTITY -02 NOS 2.) SEALING RING KBI PART NO A27763/17/KI QUANTITY-02 NOS | Set | 360.00 | 100.3 | 36,108 |
| 35 | Distributor Valve Complete without Common Pipe Bracket and Control Reservoir for Freight Stock as per RDSO Specn.No.02-ABR- 02,appendix-A1 of Oct.-13 with Amendment No.- 3 of April-2010 | Numbers | 58.00 | 30,619.82 | 17,75,949.56 |
| 36 | GASKET FOR COMMON PIPE BRACKET TO RDSO DRG. NO. WD 83062-S-01 ALT-1. MATERIAL ANS SPECN. 02.ABR.02,WITH AMDT.3 OF APRIL 2010. THIS ITEM IS RESERVED FOR PROCUREMENT FROM RDSO APPROVED SOURCES ONLY. | Numbers | 1200.00 | 88.5 | 1,06,200 |
| 37 | Air Brake Hose Coupling for Brake Pipe to RDSO Drg. No. SK-73547 ALT-13 OR LATEST. MATERIAL AS PER RDSO SPECIFICATION NO. 02- ABR-02 AMENDMENT NO. 3 OF APRIL-2010 OR LATEST. This item is reserved for PROCUREMENT FROM RDSO approved sources only. | Numbers | 2400.00 | 1,693.3 | 40,63,920 |
| 38 | AIR BRAKE HOSE COUPLING FOR FEED PIPE TO RDSO DRAWING NO WD-81027-S-01, ALT-10. MATERIAL AND SPECIFICATION TO RDSO SPECN 02-ABR-02,APPENDIX-F. AMENDMENT NO. 3 OF APRIL 2010. THIS ITEM IS RSERVED FOR PROCUREMENT FROM RDSO APPROVED SOURCES ONLY. | Numbers | 2400.00 | 1,729.88 | 41,51,712 |
| 39 | AUTOMATIC PRESSURE MODIFICATION (APM) DEVICE OF AIR BRAKE WAGONS HAVING BMBS TO RDSO DRG.NO. WD-08096-S-01, ALT-02 CONFORMING TO RDSO SPECN.NO. WD-23- BMBS-2008 (REV-1). | Numbers | 36.00 | 12,142.2 | 4,37,119.2 |
| 40 | POH KIT FOR 355 MM DIA BRAKE CYLINDER TO RDSO DRG. NO. - WD-92051-S-06, ALT-5 OR LATEST, CONSISTING OF FOLLOWING ITEMS (1) PISTON PACKING TO DRG. NO. - WD- 92051-S- 10, ALT- NIL OR LATEST = 1 NO./KIT (2) WEAR RING TO DRG. NO. - WD-92051-S-09, ALT-2 OR LATEST, ITEM - 3 = 1 NO./KIT (3) LEATHER WASHER TO DRG. NO.-WD-92051-S-09, ALT-2 OR LATEST, ITEM- 11 = 1 NO./KIT. | Set | 480.00 | 234.79 | 1,12,699.2 |
| 41 | Brake cylinder 355 mm to RDSO's Drg. No. WD- 92051-S-06, Item No. 1 to 17, Alt. No. 5 or latest. TO RDSO's Specn. No. 02-ABR-02 with amendment No. 4 [FOUR] of JUNE-2010 or latest. THIS ITEM IS RESERVED FOR PROCUREMENT FROM RDSO APPROVED SOURCES ONLY | Numbers | 54.00 | 10,559.82 | 5,70,230.28 |
| 42 | BRAKE CYLINDER 300 MM CONFIRMING TO APPENDIX-B OF RDSO SPEC NO.02-ABR- 02,Amendment No.3,RDSO DRG.NO.WD-92051- S-11. Alt-3. | Numbers | 34.00 | 8,788.64 | 2,98,813.76 |
| 43 | HOSE PIPE 10" AIR BRAKE CYLINDER (BMBC) WITH INBUILT SLACK ADJUSTER OF AIR BRAKE WAGONS HAVING BMBS. RDSO[W]WD-09034-S- 11 ITEM NO. 24 & ALT NO.08. SPEC:WD-23- BMBS-2008(REV.1) | Numbers | 720.00 | 2,122.82 | 15,28,430.4 |
| 44 | Slack adjuster type IRSA-600 complete for BOX 'N' wagon to RDSO Drg. No. WD-82064-S-01 RC Alt.12 Item-1 TO 48. (Length of Control Rod is 1255 mm +/- 1 mm.) SPEC 07-ABR-1992 AMEND. 4 OF JULY 2000 | Numbers | 77.00 | 9,266.54 | 7,13,523.58 |
| 45 | Hand Brake Cable Assembly for 10" Bogie Mounted Brake Cylinder to KBI Part No. C 177846 of Knorr Bremse BMBS manual Rev.3 or OEM Part No. of Prag Confirming to RDSO Specification No. WD-23-BMBS-2008 (rev.1) with Amendment-1 of Sept.2016. | Numbers | 74.00 | 5,599.1 | 4,14,333.4 |
| 46 | Brake Slack Adjuster complete Type IRSA-750 for BOXNHL/BCNHL Wagons to RDSO Drawing No. WD-93061-S-01, Alt-1 Item No.01 to 48 confirming to RDSO Spec. No. 19-ABR-07 with Amend No.3 of SEPT-2016. | Numbers | 43.00 | 9,969.82 | 4,28,702.26 |
| 47 | Spring for 355 mm Brake Cylinder to RDSO Drg No. WD-92051-S-09,item No 2, Alt.No.2. | Numbers | 200.00 | 706.82 | 1,41,364 |
| 48 | Leather Washer for drain plug of Auxiliary Reservoir & Brake Cylinder as per RDSO Drg. No. WD-92051-S-01, Alt-4, item No. 09, & Drg. No. WD-92051-S-14, Alt-03 and confirming to RDSO specification No Spec:02-ABR-02 with amendment no 4 of Sept-2016 | Numbers | 1200.00 | 6.94 | 8,328 |
| 49 | Flange FOR 20mm NB pipe confirming to RDSO Spec No 04-ABR-02 Amend -6 of April 2010 and material specification stainless stee to IS : 6911-1992X04 Gr 19 Ni9 304SI RDSO DRG NO. WD-83062-S-07,ITEM-3,ALT-5 | Numbers | 1276.00 | 120.36 | 1,53,579.36 |
| 50 | FLANGE for 32mm NB PIPE SIZE CONFORMING TO RDSO SPEC NO.04-ABR-02,AMEND-6 RDSO Drg.NO.WD-83062-S-07, ITEM.3. ALT.5. | Numbers | 476.00 | 115.64 | 55,044.64 |
| 51 | SOCKET FOR 32mm NB PIPE SIZE CONFIRMING to RDSO Spec NO.04-ABR-02.Amend-6 RDSO DRG.NO.WD-83062-S-07, item.2 alt.5. | Numbers | 1121.00 | 79.89 | 89,556.69 |
| 52 | SOCKET FOR 20 MM NB PIPE (STAINLESS STEEL) CONFORMING TO RDSO SPEC.NO. 04-ABR-02. REV. 1 OF NOV 2017. TO RDSO DRG NO : WD- 83062-S-07, ITEM-2. ALT : 6 | Numbers | 276.00 | 81.42 | 22,471.92 |
| 53 | SOCKET FOR 20mm N.B. PIPE (SPECIAL) CONFIRMING TO RDSO SPECN NO 04- ABR - 02 AMEND- 6 and material specification Stainless steel to IS : 6911-1992X04 Gr.19 Ni9 304SI to RDSO Drg.No. WD- 83062-S-07, ITEM - 2 ALT: 5. | Numbers | 48.00 | 204.14 | 9,798.72 |
| 54 | FLANGE FOR 20mm N.B.PIPE [SPECIAL] CONFIRMING TO RDSO Spec No 04-ABR-02 Amend-6 of April 2010 AND MATERIAL SPECIFICATION STAINLESS STEEL TO IS ; 6911- 1992X04 Gr 19 Ni9 304SI TO RDSO Drg.No.WD- 83062-S-07, ITEM-3 ALT-5. | Numbers | 38.00 | 169.92 | 6,456.96 |
| 55 | FIXED FLANGE CONFIRMING TO RDSO Spec No 04-ABR-02.Amend -6 RDSO Drg.No.WD-83062- S-06 item 1 alt.3. | Numbers | 144.00 | 124.36 | 17,907.84 |
| 56 | T-Bracket for fixing Air Brake pipe. Drg. No. RYPS/SCR/C&W/SK-240. | Numbers | 264.00 | 169.92 | 44,858.88 |
| 57 | STAINLESS STEEL PIPE 20 MM NOMINAL DIA. WITH PLAIN ENDS IN A STANDARD LENGTH OF 6.0 TO 6.3 MTRS .FOR PASSENGER STOCK CONFORMING TO RDSO.SPEC.NO.04-ABR-2002 (Rev.01 of nov.-2017)& MATERIAL TO ASTM- A312 SCHEDULE- 40S Gr.TP 304 (Seamless). THICKNESS OF PIPES TO BE GOVERNED BY IS: 1239 (PART-1) Heavy C-CLASS. | Metre | 670.00 | 600.25 | 4,02,167.5 |
| 58 | STEEL PIPE, (SEAMLESS) 32 mm nominal dia. with plain ends in a STANDARD LENGTH OF 6.0 TO 6.3 MTRS. FOR FRIGHT STOCK CONFORMING TO RDSO Spec.no. 04-ABR-2002 (Rev.01 of Nov.-2017) & Material to IS : 1239 (Part- 1) HEAVY GRADE OR ASTM A-106 Gr.A | Metre | 700.00 | 346.92 | 2,42,844 |
| 59 | CONTROL ROD HEAD CONFIRMING RDSO SPECN.NO.07-ABR-92, Amend-4 to RDSO drg.No.WD.82064-S-05-RC, Item-2, Alt-7. | Numbers | 180.00 | 337.48 | 60,746.4 |
| 60 | Double release valve kit for C3W DV consisting of 5 items to SIL PT.No.FTIL PT.No. AS PER ENCLOSURE | Set | 25.00 | 1,281.51 | 32,037.75 |
| Schedule total | ₹2,92,18,354.82 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .