RequiredExperience with Government Bid to RA enabled No Hopper Tipper Dumper ( 2 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Certification Chassis Certification ARAI * Chassis Certification ARAI/VRDE/ICAT No - * At the time of supply of the equipment
Requiredthe chassis should not be more than 6 months old Yes * 1/5 Generic Parameters Type of TIPPER Garbage Tipper Garbage Tipper Type of TIPPER if other tipper
Requiredplease declare type of Tipper
Required- * Make of Chassis - * Type of Chassis Frame - * Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl * Type of Fuel Diesel Diesel Vehicle Emission Complaince BS-IV BS-IV Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Kmpl) 19.6 * Speed
RequiredMax (Km/Hr) 80 * Max Engine Power BHP (BHP@rpm) 58 More than 58.0 Or higher Rated RPM at Max Engine Power 3300 * Max Engine Torque (N-M@rpm) 157.5 More than 157.5 Or higher Rated RPM at Max Engine Torque 1600 * Main Engine Aspiration Turbocharged Turbocharged No. of Cylinder in Main Engine (Nos) 3 * Fuel Tank Capacity (Ltrs) 40 * Gradeability of Vehicle with load( %) 18 * Ground Clearance (mm) 135 * Wheel Base (mm) 2350 * Kerb Weight (Kg) 1631 * Gross Vehicle Weight (Kg) 2545 More than 2545.0 Or higher Type of BIS MARKED Vehicle Tyre Tubeless * Chassis Manual Manual 2/5 Transmission System Number of Speed Forward Gears 5 * Type of Steering Power Operated Power Operated Turning Radius
RequiredMin (mm) 5850 Less than 5850.0 Or lower Speed Governers/ECU Yes * ABS Fitted No * Front Vehicle Brake - * Rear Vehicle Brake - * Type of Clutch - * Tipping Angle (Degree) 45 * Tipper Container cap acity/Volume(cubic metres) 2.7 2.7 - 20.0 Or higher Consructional Parameters Size Of Front Tyres (mm) - * Size Of Rear Tyres (mm) - * Size of Wheel (mm) 355.6 * Tipper body Pivot length (mm) 1420 * Tipper body Length (mm) 2820 * Tipper Body Height (mm) 615 * Overall Height of Tipper from Ground (mm) 2100 * Body Plate Thickness (mm) 1.6 * Main Frame Thickness (mm) 4 * Hydraulic System Yes * Tipping Hydraulic Cylinders(Make) - * Hydraulic System Driven by Main Engine * Tipper Container Material Mild Steel Mild Steel Thickness of sheet from tipper Collector Container Made (mm) 1.6 * Dumping Height (mm) 730 * 3/5 Engine Oil Pressure Level Indicator in Control Panel No * Fuel Gauge Indicator in Control Panel Yes * Engine Cooling Liquid Temperature Indicator in Control Panel Yes * Operating Hour Meter No * Locking/Unlocking of Tipper Discharge Container Yes * Lowering/Lifting of Tipper Discharge Container Yes * Counter Weight No * If yes Counter Weight (kg) 0 * Paint Automotive Paint * Performance Parameters Standard Sparewheel and Tool Kit Yes * Warranty Time (Month) 12 12.0 No. Of Free Service (Nos) 4 * Battery Warranty (Months) 12 12
Required24
Required36 Or higher Warranty Distance (Km)(Unlimited during warranty Period) Yes * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.