CAPACITY ENHANCEMENT OF 160 KVA TRANSFORMER BY 400 KVA TRANSFORMER UNDER EUDD I NOIDA

Amount

FOLLOWING WORK CAPACITY ENHANCEMENT OF 160 KVA T/F BY 400 KVA T/F NEAR WP-01, SECTOR-117, NOIDA IN AREA OF EUDSD-IV, NOIDA :-

Dismantling of 160 KVA T/F (Old & Used) from work site plinth with opening of jumper / connection etc.

Carriage of after dismantled 160 KVA T/F (old & used) from works site to JE store / central store & proper stacking with loading & unloading.

Safe loading and carriage of 400 KVA Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Mounting, installation of 400 KVA Transformer on existing Plinth with refixing of jumper / connection etc., alongwith double earthing of the same, complete in all respect as per RESPO schedule.

Water level earthing of 400 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)

WORK OF 01 NO. REPAIRING OF EXISITNG DAMAGED PLINTH AND FENCING OF DISTRIBUTION TRANSFOERMER OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT NEAR WP-01, SECTOR-117, NOIDA IN AREA OF EUDSD-IV, NOIDA AS PER FOLLOWING :-

Reparing of damaged Plinth of Distribution T/F as per site requirement complete with all respects of LT Sub-stations. (All Material provided by contractor for above work.)

Reparing of damaged wiremesh fencing/frames as per site requirement complete with all respects with painting of LT Sub-stations. (All Material provided by contractor for above work.)

Reparing of damaged boundry / toe wall by brick/cement work including plaster and finishing with water proof cement paint for each fencing of LT Sub-stations as per site requirement. (All Material provided by contractor for above work)

Providing and installation of LT ACB 400 Amp. with cabinet / structure (Make L&T, Schneider, ABB, Hevell's) as per following specification with all relevant certificate :-

400 amp. 03 pole fixed manual ACB.

Red/yellow/blue light indication

ON & OFF Indication

Amp., Volt meter& energy meter digital

Metering C.T 400/5A,

Panel fabrication of size 1250mm x 900mm x 600 mm made of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg.

Fabrication of aluminium bus-bar for each phases

Incoming size 425 mm x 50mmx12 mm (twin)

Out going size 720 mm x 50mm x 12 mm(twin)

Neutral size 900mmx50mmx12 mm.

Fabrication of pannel stand made of M.S Angle of size 900mm x 600mm x 500 mm as per drg.

Assembly of above ACB, Indicators, Meters, Metering CT & bus bar arrangment in the panel, fitting the panel on Stand with nut and bolts with wiring etc. & grouting in ratio 1:4:8 with cement, coarse sand and brick blast.

Providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on L.T side of T/F.

Making all connections with ACB & Distribution T/F and commissioning the ACB complete in all respect.

Water level earthing of A.C.B. with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)

Agarwal Electric Store