Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.3 LAccepted-AOC | L1 | Accepted-AOC L1 Bidder | |
| 2 | L2₹25.8 L+₹51,121.50 (2.02%)Rejected-Finance | L2 | Rejected-Finance Other than lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
17 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) 873 EWS
Garrison Engineer (Indep) 873 Engineer Works Section PIN 913 873 C/O 56 APO
REP/REPLACEMENT OF EXT WAT SUPPLY PIPE LINES DI/MS/GI OF VARIOUS SIZES PIPES, CLEANING OF SEMI UG SUMP AND RCC OH TANKS OF VARIOUS CAPACITIES INCL WAT TESTING AT JAI GHATI, GHATIMORE, CHINTA, CHONCHORA, CBS BHALRA MIL STN UNDER GE (I) 873 EWS.
2022_MES_545357_1
NIT-43 of 22-23
Open Tender
Pipes and Pipe related activities
Item Rate
180 days
Bhaderwah
As per NIT
7 documents required · 7 mandatory
₹500
GE (I) 873 EWS
₹60,000
Yes
26 Sept 2022
13 Aug 2022
20 Sept 2022
13 Aug 2022
17 Sept 2022
1 Sept 2022
Amount
Excavating in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out, complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.
Removing excavated soils not exceeding 50 metres and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and directed.
Demolition of cement concrete (un-reinforced) of any descrition and in any position not otherwise specifically provided for, complete all as specified and directed.
Cement concrete type D-2 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling, basement and mass concrete for bends, pipe support, complete all as specified and directed.
Taking out Mild Steel / Cast Iron / Ductile Iron / Galvanised Iron water mains including all fittings with spigot and socket ends or flanged ends including lead / tyton joints and burning out lead joints and recovering lead, cleaning the pipe and removing to store for reuse complete all as specified and as directed :- Note : Excavation and earth work shall be measured and paid separately.
(a) 400 mm bore
(b) 200 mm bore
(c) 150 mm bore
(d) 100 mm bore
(e) 80 mm bore
Taking out old unserviceable Galvanised Iron Water Pipe (including all fittings) from walls / floors / ceilings / trenches complete of following sizes :-
(a) 50 mm bore
(b) 40 mm bore
(c) 25 mm bore
(d) 20 mm bore
(e) 15 mm bore
Supply, laying, jointing and testing Mild steel ERW pipes having minimum 5.4 mm wall thickness confirming to IS : 1239-2004 amended upto date in any length of following description, complete all as pecified and as directed. Make : TATA / Jindal / Prakash / Swastik
(a) 400 mm bore
(b) 200 mm bore
(c) 150 mm bore
Supply, laying, jointing and testing Cast Iron Pipes with spigot and socket ends centrifugally cast, class ‘LA’, in any length, laid in trenches of the following bore :- Note : Run lead joints / tyton joints, CI specials and earth work shall be measured and paid separately. Make : Electro Steel / Lanco / Kesoram / Tata Metaliks / Electrotherm.
(a) 200 mm bore
(b) 150 mm bore
(b) 100 mm bore
(b) 80 mm bore
Supply, laying, jointing and testing Ductile iron pipe with spigot and socket ends Class K-7 suitable for tyton joint including jointing material/joints laid in trenches complete all as specified and directed of following sizes:-
(a) 200 mm bore
(b) 150 mm bore
(b) 100 mm bore
(b) 80 mm bore
Supply and fixing pipe galvanised medium grade with all fittings such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc. supplied and laid in trenches complete including all fittings of following sizes :- Make : Jindal / TATA / Prakash Tubes
(a) 50 mm bore
(b) 40 mm bore
(c) 25 mm bore
(d) 20 mm bore
(e) 15 mm bore
(f) 80 mm bore
Cutting the CI/ DI pipes and reducing the required length before laying for inserting of new CI specials such as Tees/ reducers/ tail pieces/ collars/ sluice valve/ air release valve etc. complete for following sizes of pipes:- Note:- CI specials and earth work will be measured and paid seperately.
(a) 200 mm bore
(b) 150 mm bore
(c) 100 mm bore
(d) 80 mm bore
Specials of Ductile iron / Cast Iron fittings for spigot and socket / flanged pipe upto 150mm bore such as bends (any type radius and angle) tapers any type (straight, bends) tee, joint piece single branch, Y junction, double branch, cross (all socket or socket and spigot or all flanged ends) collar, caps and plug, connecting piece one end flanged and other socketed or spigot and bell mouth complete all as specified and as directed. Note : 1. The fittings shall be as per IS1538-1989 2. The joints shall be measured and paid separately.
Specials of Ductile iron / Cast Iron fittings for spigot and socket / flanged pipe 200mm to 400mm bore such as bends (any type radius and angle) tapers any type (straight, bends) tee, joint piece single branch, Y junction, double branch, cross (all socket or socket and spigot or all flanged ends) collar, caps and plug, connecting piece one end flanged and other socketed or spigot and bell mouth complete all as specified and as directed. Note : 1. The fittings shall be as per IS1538-1989 2. The joints shall be measured and paid separately.
Taking out/ brning out of leaking and damaged lead joints of existing CI mainsfrom position including removing the old lead carefully without damaging to the pipe complete for the fllowing bore of pipes: Note: Excavation and earth work will be measured and paid seperatly.
(a) 200 mm bore
(b) 150 mm bore
(c) 100 mm bore
(d) 80 mm bore
Run lead joints for CI pipe, spigot and socket ends including jointing materials such as spun yarn etc. complete for CI pipe of following description all as specified and directed.
(a) 200 mm bore
(b) 150 mm bore
(c) 100 mm bore
(d) 80 mm bore
Welding joints for CI / DI / MS pipes including jointing material such as welding rods etc. complete for pipe of following description all as specified and directed. Note : The contractor shall make his own arrangement for Welding Machine and DG set required for welding work and nothing extra from the department shall be admisible on this account.
(a) 400 mm bore
(b) 300 mm bore
(c) 200 mm bore
(d) 150 mm bore
(e) 100 mm bore
(f) 80 mm bore
Cast Iron Sluice Valve class PN-1, PD short body conforming to IS:14846-2000, heavy duty, both ends flanged with stainless steel spindle & check nut, CI operating wheel, all nuts, bolts, washers, gaskets etc. of the following description, including dismantling of old unserviceable Sluice Valve, complete all as specified & directed.
(a) 400 mm bore
(b) 200 mm bore
(c) 150 mm bore
(d) 100 mm bore
(e) 80 mm bore
Stainless Steel (SS) Sluice Valve class PN-1, PD short body conforming to IS:14846-2000, heavy duty, both ends flanged with stainless steel spindle & check nut, operating wheel, all nuts, bolts, washers, gaskets etc. of following description, including dismantling of old unserviceable Sluice Valve, complete all as specified & directed.
(a) 200 mm bore
(b) 150 mm bore
Cast Iron Non Return Valve without by-pass arrangement, swing type, confirming to IS:5312, flanged ends, all nuts, bolts, washers, gaskets etc. of following description, including dismantling of old unserviceable NRV, complete all as specified and directed.
(a) 200 mm bore
(b) 150 mm bore
Stainless Steel (SS) Non Return Valve without by-pass arrangement, swing type, confirming to IS:5312, flanged ends, all nuts, bolts, washers, gaskets etc. of following description, including dismantling of old unserviceable NRV, complete all as specified and directed.
(a) 200 mm bore
(b) 150 mm bore
Air release valve with double chamber of bore conforming to IS 14845 of following description, including dismantling of old unserviceable NRV, complete all as specified and directed.
(a) 100 mm bore
(b) 80 mm bore
(c) 50 mm bore
Supply and fixing Gun metal globe / gate valve ISI Marked with and including jointing meterial and taking out old unserviceable valves complete all as specified and directed of following sizes :- Make : Advance / Bir / Leader / Sant
(a) 50 mm bore
(b) 40 mm bore
(c) 25 mm bore
(d) 20 mm bore
(e) 15 mm bore
Stop valves of cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete of the following description including taking out the old unserviceable stop valve complete all as specified and directed.
(a) 50 mm bore
(b) 40 mm bore
(c) 25 mm bore
(d) 20 mm bore
(e) 15 mm bore
Supply and fixing GI Socekt of Havey grade with and including jointing meterial and taking out old unserviceable socket complete all as specified and directed of following sizes :- Make : Make : Jindal / TATA / Prakash Tubes
(a) 50 mm bore
(b) 40 mm bore
(c) 25 mm bore
(d) 20 mm bore
(e) 15 mm bore
Supply and fixing GI Union of Havey grade with and including jointing meterial and taking out old unserviceable Union complete all as specified and directed of following sizes :- Make : Make : Jindal / TATA / Prakash Tubes
(a) 50 mm bore
(b) 40 mm bore
(c) 25 mm bore
(d) 20 mm bore
(e) 15 mm bore
Supply and fixing GI Elbow of Havey grade with and including jointing meterial and taking out old unserviceable Elbow complete all as specified and directed of following sizes :- Make : Make : Jindal / TATA / Prakash Tubes
(a) 50 mm bore
(b) 40 mm bore
(c) 25 mm bore
(d) 20 mm bore
(e) 15 mm bore
Supply and fixing 6" Nipple of Havey grade with and including jointing meterial and taking out old unserviceable Nipple complete all as specified and directed of following sizes :- Make : Make : Jindal / TATA / Prakash Tubes
(a) 50 mm bore
(b) 40 mm bore
(c) 25 mm bore
(d) 20 mm bore
(e) 15 mm bore
Supply and fixing 12" Nipple of Havey grade with and including jointing meterial and taking out old unserviceable Nipple complete all as specified and directed of following sizes :- Make : Make : Jindal / TATA / Prakash Tubes
(a) 50 mm bore
(b) 40 mm bore
(c) 25 mm bore
(d) 20 mm bore
(e) 15 mm bore
Draining out water from RCC Semi Underground Sump of under mentioned capacity, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes and writing the 'Date of Cleaning' outside all as specified and directed.
(a) 2,00,000 Gallons
(b) 1,50,000 Gallons
(c) 1,00,000 Gallons
(d) 50,000 Gallons
(e) 30,000 Litres
(f) 20,000 Litres
(g) 10,000 Litres
Cleaning of RCC Open Sump of capacity 0.50 Lakh Gallons by draining out of water, taking out the sludge deposited, cleaning of Wire Mesh Nets / walls and floor by scratching with wire brushes at Jaighati complete all as specified and as directed. Notes : 1. The Contractor has to make arrangements for closing / diverting flowing water of Jai Nullah using mechanical means viz. JCB etc. before the cleaning commences and making good the disturbed surface after the cleaning process ends all as directed. 2. The area upto 15 metres from the outer walls of the Sump shall be cleaned by removing the silt / sand / pebbles / stones etc. deposited / accumulated using mechanical means viz. JCB etc. and the excavated material shall be removed to a distance not exceeding 100 metres all as directed. 3. The Quoted Rates shall be deemed to be inclusive of the above mentioned aspects and nothing extra from the department shall be admissible on this account.
Preparation of new plastered or concrete surfaces of wall /sump and applying two coats of cement base paint, complete all as specified.
Preparation of old plastered or concrete surfaces of wall /sump and applying one coats of cement base paint, complete all as specified.
Masonry Valve Pit with PCC 1:4:8 type D-2 as in foundation, Brick Work 23cm thick in CM 1:4, 15mm thick plaster in CM 1:4 internally and flush pointing in same mortar as the work proceeds externally, 40mm thick flooring in PCC 1:2:4 type B-1 laid over 75mm thick hard core, top cover shall be made out of MS sheet 10 SWG thickness fixed in angle iron frame made out of angle size 40 x 40 x 6mm with 12mm dia handle and two number hinges on one side and locking arrangement at other side complete including painting with two coats of sythetic enamel paint over a coat of red oxide primer, complete including earth work, excavation, disposal of surplus spoil not exceeding 50m all as specified and directed of the following sizes :-
(a) 950mm x 950m x 950mm (internal dimension of chamber)
(b) 600mm x 600m x 950mm (internal dimension of chamber)
(c) 450mm x 450m x 700mm (internal dimension of chamber)
Material and labour for lagging to pipes used in iternal/external water supply pipe lines all round with, 25 mm thick bonded mineral wool performed "SPAPON" pipe sections of density 144 Kg/Cum conforming to IS 9842 complete all as specified and directd by Engineer-in-Charge of following sizes:-
(a) 200 mm bore
(b) 150 mm bore
(c) 100 mm bore
(d) 80 mm bore
(e) 50 mm bore
(f) 40 mm bore
(g) 25 mm bore
(h) 20 mm bore
(j) 15 mm bore
Supply only High Strength Calcium based granular disinfectant for water treatment, more stable than chlorine gas, and stronger than Bleaching Powder and Sodium Hypochlorite of following specifications :- (a) Chemical analysis & physical observations : Description : Whitish granules of granular size (Mesh passing through – 100 BSS) : 1.1 (± 0.1) % , Water / moisture : 5.00 (± 0.2) % Other insoluble Calcium salts: 1.1 (± 0.1) % Mercury and other Heavy Metal contaminants : BDL (The chlorination chemical must contain appropriate quantities of dispersants / corrosion inhibitors to prevent encrustation / scaling in distribution systems) (b) Strength in terms of quantity of chlorination chemical required to obtain free chlorine of 1 ppm per lakh litres of water : Requirement must be 100 gm. per one lakh litre of water to achieve 05-1.0 ppm Av. Cl. at injection point (Site and raw water quality variations may apply additionally). (c) Stability : Projected shelf life of chlorination chemical must be one year with minimal loss of chlorine. Make : Purichlore / Mark Daxter / ALTOCH-Gp (Declivace Technologies Pvt Ltd) / Any E-in-C approved Make
Supply only alumina ferric (Grade-4) suitable for purification of drinking water solid water in the form of solid lumps/slabs from the manufacturer having valid BIS certificate as specified in table 1 of IS : 299-2012 complete all as specified and as directed by Engr-in-charge. Make approved by E-in-C/Command HQ. Note : (i) Each consignment of alum supplied by the contractor should have a marking indicating weight of the slab and the alum supplied by the contractor shall be got tested for each lot from Govt reputed lab. The charge for testing shall be borne by the contractor and cost of the same shall be deemed to be included in the rate quoted. The contractor shall deliver the material as per site requirement and as per direction of Engineer-in-charge. (ii) The material will be supplied in bulk and should have fully information on card with each lot as:- (a) Name & grade of material (b) Mass of material in package (c) Name of manufacturer and trade mark. (d) Date of manufacturing (e) Batch No.
Supply only Calcium Hypo chlorite (chlorination chemical) high efficient (calcium hypo chlorite having 65% to 70% available chlorine) calcium based in granular form and should not have sodium/Iron/Mercury or other heavy metal contaminants complete all as specified and directed by Engr-in-charge. Note :- 1 The contractor has to produce test certificate from manufacturer’s (OEM) or reputed approved lab. 2. The calcium based granular disinfectant shall be brought at site in sealed container of appropriate capacity duly marked with date of manufacturing and batch No, expiry date etc.
Supply only bleaching powder stable Gde-I conforming to IS specifications 1665/89 (Second revision) minimum available chlorine percentage lay mass 34% +1% in 25kg polyethene HDPE bags duly marked date of manufacturing and batch no of fresh lot complete all as specified and as directed by Engr-in-charge. Make approved by E-in-C/Command HQ
Testing of drinking water analysis report of physico-chemical and micro biological analyzing with following parameters :- (i) Temperature (ii) Ph value (iii) Taste (iv) Turbidity (v) Odour (vi)Total hardness CACO3 (vii) Colour (viii) Zinc (ix) Lead (x)Cyanide (xi) Chloride (xii) Fluoride (xiii)Ammonia (xiv) Nitrate (xv) TDS (xvi)Phenolic compound (xvii) Residue free chlorine Note :- (i) The sample will be obtained him self/rep of contractor in presence of JE E/M or Engr-in-charge from site (ii) The test report will be obtained from a authorized as per IS-10500-2012
SHARMA TRADERS
Bidder Name
SWASTIK TRADERS
SHARMA TRADERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .