AR MO to residential block under Urban Division Shimla SH Renovation of set No. O.II.110 i.e. Rooms flooring, Kitchen, Toilet, bath C.B with all necessary fitting, painting distempering work etc. at Nabha Estate.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or leaner mix (i/c equivalent design mix)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 40 mm nominal size)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., 600 x 600mm

Providing and laying Vitrified tiles in different sizes(thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete 1200x600 mm

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws.including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge 40mm thick 2nd class deodar wood.

Providing and fixing wire gauge shutters using galvanised M.S. wire guage of IS. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey wondows including bright finished black namelled iron hinges with necessary screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge 40 mm thick in 2nd class deodar wood.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge 250x16mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge :(i) 200x10mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge :(i) 150x10mm