Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹2.4 LAdmitted-Finance JEMO GHASILPARA P O BAGDANGA P S KANDI WARD 8 KANDI MUNICIPALITY DIST MURSHIDABAD WB PIN 742138 | KANDI | MURSHIDABAD | WEST BENGAL | 742138 | -32.27% | ₹2.4 L | L1 | Admitted-Finance |
| 2 | L2₹2.4 LAdmitted-Finance MULUK BOLPUR DIST BIRBHUM | BIRBHUM | WEST BENGAL | -31.99% | ₹2.4 L | L2 | Admitted-Finance |
| 3 | L3₹2.6 LAdmitted-Finance | -26.33% | ₹2.6 L | L3 | Admitted-Finance |
| 4 | L4₹2.9 LAdmitted-Finance HILLI FATERPUR KHARUN DAKSHIN DINAJPUR WEST BENGAL 733126 | HILLI | DAKSHIN DINAJPUR | WEST BENGAL | 733126 | -17.97% | ₹2.9 L | L4 | Admitted-Finance |
Tender Value
₹3.6 L
EMD Value
₹7,165
Closing Date
18 Feb 2026, 2:00 pmClosed
Secretary, Purba Bardhaman Zilla RMC
PODDAR COMMERCIAL COMPLEX (1ST FLOOR),PURBASHA BUS STAND, ALISHA, BURDWAN -713103
Installation of 1 No, Highmast Light (12.50 mtr.) at Katwa-I (Srikhanda) Krishak Bazar under Purba Bardhaman Zilla RMC, Dist.- Purba Bardhaman.
2026_WBSMB_1003250_1
WB/Pur.BZRMC/e-NIT-29/2025-26
Open Tender
CIVIL WORKS
Percentage
30 days
Katwa-I (Srikhanda) Krishak Bazar
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,000
₹7,165
Yes
Office of the Purba Bardhaman Zilla RMC
7 Aug 2026
10 Feb 2026
20 Feb 2026
10 Feb 2026
18 Feb 2026
10 Feb 2026
12 Feb 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Connecting the equipments to early busbar incl. S&F No. 8 SWG G.I. wire on wall /floor with stapels as per G.S. | - | Mtr | 1 | - |
| 2 | Excavation of soil for installation of Earth Electrode and filling & ramming for soft Soil. | - | Cum | 1 | - |
| 3 | Earthing with 50mm dia G.I. pipe (TATA-M) 3.64mm thick * 3.04 Mtrs. Long and 1*4 WG wire (4 Mtr. Long) 13mm dia * 80mm long G.I. bolts double washers incl. S&F dia pipe protection (1Mtr long) to be filled with bitumen partly under the G.L. and partly above G.L. driven to an average depth of 3.65Mtrs .below the G.L. and restoring the surface duly remmed | - | Set | - | - |
| 4 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe | - | Item | - | - |
| 5 | Supply, Erection,Testing and Commissioning of 12.5 mtr High mast Poles with following dimentions- Dimension : Bottom Dia : 340 mm, Top dia: 150 mm, Section-2 (Section Length 6500 mm each),Thickness- 3 mm , Base Plate Size : 540X20 mm . PCD : 440 mm, Foundation Bolts : M24 x 750 mm x 8 nos, Winch SS Rope. Make : Approved by EIC. | - | Set | 0.29 | - |
| 6 | Supplying & installation of Feeder Pillar to be fixed at the base foundation of High Mast with 50X50X6 mm angle iron leg of 1 mtr. having following specification . 1.Incomer: 63A TPN SFU 2.Supplying & fixing 415V sheet metal (16 SWG) Iron Clad 100 A Busbar chambers on angle iron frame on wall with 4 bar 4X20X5 mm Al bus-bar (85 mm long) , incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991 3.40A 4 Pole contactor. (2 NO+2 NC) (Make-Schneider/equivalent) 4.Bypass togle switch- 1 no 5. 24 hours single dial timer. (make- L&T)- 1 NO 6. 240V 20A SPMCB (make: Legrand or equivalent)- 15 Nos. 7.Phase Indicator- 3 nos,240 V CT ( turn ratio - 100/5 A)-1 ,8. Digital Voltmeter- 1 No, 9.Digital Ammeter- 1 No | - | set | - | - |
| 7 | Foundation of High Mast pole. | - | Job | 1 | - |
| 8 | Supply of 1.1 KV grade PVC/XLPE 4 core 10 sq. mm Al armoured cable.(Trailing Cable) and Feeder Pillar To Pole | - | RM | - | - |
| 9 | Supplying and fixing 4 core 10 sq. mm compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of
XLPE/PVC armoured cables | - | Each | - | - |
| 10 | Finishing the end of 4 core 10 sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials | - | Set | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.88 MB
BOQ_2459126.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].