Renovation of Office Building Chowkidar Quarter at 220 132kV Grid Sub Station Mir Bazar Anantnag

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.for thickness of tiles 10mm to 25mm

Dismentalling Bib Cocks,Commode,angle valves,PPR Pipes e.t.c in two Bath Rooms

Providing and fixing of Vertified Floor tiles 600x600 mm thickness to be specified by the manufactures of ist quality conforming to IS:13755 of approved make like nitco,orient,somany,kajaria or equivalent make in all colour such as white, ivory, grey, fume red, brown laid on 20 mm thick bed of cement mortar 1:4 1 cement:4 coarse sand including pointing the joints with white Cement and Matching Pigment etc. complete

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. (one or more coats) (out side and inside the building)

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Sanitation,including PPR fittings,Comode,Bib cocks,Mixers,Flushing cisstern,Wash basin,Geysor,angle valves,pipes and other fitting items

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and in C.P brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required, Single squatting plate with 5 liter P.V.C. automatic flushing cistern.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern,waste couplings, including painting of fittings and brackets, cutting and making good the walls wherever required : 18.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing…Rectangular shape 453x357 mm

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS:15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply inculding all PP-R plaing and brass threaded Polypropylene random fittings. This includes testing and joints complete as per direction of Engineer-incharge.

PN-16 pipe, 25mm OD(SDR-7.4)

PN-16 pipe, 32mm OD(SDR-7.4)

PPR Union 25mm

PPR Union 32mm

P/F of PVC Pipes 100 dia with all fittings including Collars,Sockets,Elbows,Tee's e.t.e complete in all respects

P/F of PVC Pipes 100 dia with all fittings including Collars,Sockets,Elbows,Tee's e.t.e complete in all respects

Providing and fixing 15 mm nominal bore C.P.brass long nose bib cock of approved quality conforming to IS standards and weighing not lessthan 810 gms.

Providing and fixing 15 mm nominal bore C.P.brass angle valve for basin mixer and geyser points of approved make conforming to IS: 8931.

Sink mixer

Towel rod

Soap case

Steel gratings

Providing and fixing collar : 100mm

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 100 mm outlet…..Sand cast iron S and S as per IS:3989

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete( Flexible pipe 40 mm dia)

Dismentalling of existing wood work,sanitary fittings,Brick work,cement concrete work e.t.c if needed and disposal of surplus raw material from the site and providing of new wooden frame and penaaled shuter for the Door

Providing and fixing in wall lining of specified medium density board, pre-laminated one side decorative lamination other side balancing lamination Grade I, exterior grade, with necessary fixing arrangement and screws etc. complete Flat pressed 3 layer particle board or graded wood particle board grade-I type-II, IS: 12823 marked including primer coat on unexposed surfaces (Const. of ward robes ) 18mm thick

Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-inCharge ............18 mm thick

Electrification, including all sockets 16A/6A,switches,wire,fans ,exhaust fans e.t.c complete

Providing and laying in position specified grade of Cement Concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto top level: (M15)1:2:4 (1 cement : 2coarse sand : 4graded stone aggregate 20 mm nominal size) complete job.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm NS Aggrigate.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately).... Kiln seasoned and chemically treated hollock wood

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge

Providing and fixing paneled or paneled and glazed shutters for doors, Windows and clerestory windows fixing with butthinges of required size with Necessary screws,excluding paneling which will be paid for separately,all Complete as per direction of Engineer-in-charge.(Note:-Butthingesand Necessary screws shall be paid separately) 2nd class kail wood (45 mm thick )

TAWQEER AHMAD SHAH (BID ID -2255998)

Suhail Ahmad Choda (BID ID -2255868)