WORK SERVICES FOR DUST PROOFING BY MEANS OF OF EPU FLOORING, PANELLING AT THE ENTRANCE AND PROVISION OF ALUMINIUM FRAME GLASS DOUBLE DOOR WITH AIR CURTAIN AT LAUNCHER BAY, 11 BRD AF STATION OJHAR

Amount

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level), complete all as specified and directed.

Material and labour for 50mm thick plain cement conctere 1:1 1/2:3, type B1 using 20mm graded stone aggregate as in flooring, surface finished even and smooth without using extra cement complete all as specified and all as directed.

Material and labour for Polyurethene flooring on concrete surface with the following specifications complete all as specified and as directed:- (a) Roughening/preparing the concrete surface substrata as required for base coat as per manufacturers instruction. (b) Laying of 1st Coat of Primer of MASTER PRIME-52, 0.4 to 0.7mm thick, coverage 1 Kg/6 sqm with consisting of two component solvanted epoxy resin based primer suitable for priming concrete surface before laying of the primer the surface drying & loose particles. (c) Application of body coat 3.5mm thick of Tech Floor Mortar SL confirm to BS 6319/CIPOXY 15 with combination of base, sealent hardener mixed in ratio 2:1:6 , 2 Kg Per 1 Sqmfor 1mm thickness. (d) Top coat of Tech floor 2K PU SL, 1.00mm thick with glossy finish with covering capacity of 1.50 kg per 1 Sqm per 1mm thickness. Manufacturers of PU Flooring : M/s CHOUKSEY / M/s CIPY Polturethene Ltd / M/s Pidilite Industries Ltd / FOSROC

Material and labour for providing two component polyster powder coated aluminium section in aluminium glazed door frame with double leaf door of size 101.6mm x 44.45mm x 2.01mm thick (the frame shall be made solid with using wooden fillets insertion in hollow section completely) fixed with 4 Nos hinges and shutters with top rail, middle rail and bottom rail of size 90mm x 44.4mm x 1.6mm thick and style 90mm long aluminium powder coated handle on both sides of shutters, aluminium tower bolt 150mm long - 01 No per leaf including tinted glass panel 4.8mm thick fitted in top panel and 12mm thick prelaminated particle board in the bottom panel with necessary jointing cleats, glazing clips, rubber packing aluminium beading screws etc., including fixing of suitable hydraulic door closer complete all as specified and all as directed.

Material and labour for aluminium powder coated glazed partitions, frame size101.6mm x 44.45 x2.01 mm thick (the frame shall be made solid with using wooden fillets insertion in hollow section completely) with one or more rebates with necessary jointing cleats, glazing clips, rubber packing, aluminium beading, screws etc complete all as specified and directed Note : Other accessories if any required are deemed to be included in quoted rates

Material and labour for 5.5mm thick Sheet glass, ordinary quality and glazing with fixing arrangement exceeding 0.5 sq m in each pane complete all as specified and all as directed.

Supply and fixing aluminium composite panels for outdoor use (ACP) fixed in between frames, elevations or any other positions 4 mm thick aluminium composite panel of approved colour complete all as specified and all as directed. Make : Arrowbond/viva/Alstone

Santhi Enterprises

M/s M R MAHANA

Sai construction & services

United Enterprises