CONSTRUCTION OF DEFICIENT MARRIED ACCOMMODATIONS TYPEIV S and TYPEV MARRIED RESIDENTIAL ACCOMMODATIONS AT VRDE AHMEDNAGAR

Amount

Schedule 'A' Part - I (BUILDINGS AND STRUCTURES) This Schedule (contains under mentioned Sl. item No. 1.01 to 1.04) is not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only.The tenderer is required to quote their rates in Column 6.

Lumpsum price worked out by the contractor for Construction of Type-IV(S) married accommodation 21 Quarters (G+ 6 Storey) (Block of one )with servant Quarters,RCC Water Storage tanks,RCC OH Static water tank of capacity 25000 Litres on roof top for fore fighting, with RCC framed structure building, complete all as shown on drawings and as per specification. And Aditional area in stilt.in RCC framed structure for Type-IV(S) married accommodation, complete all as shown on drawings and as per specification.

Lumpsum price worked out by the contractor for Construction of Type-V married accommodation 14 Quarters (G+ 5 Storey) with servant Quarters,RCC Water Storage tanks,RCC OH Static water tank of capacity 25000 Litres on roof top for fore fighting, with RCC framed structure building, complete all as shown on drawings and as per specification and Aditional area in stilt.in RCC framed structure for Type-IV(S) married accommodation, complete all as shown on drawings and as per specification.

Lumpsum price worked out by the contractor for Construction of RCC septic tank of 150 users, complete all as shown on drawings and as specified.

Lumpsum price worked out by the contractor for Construction of Soakage well of size 3.60 m dia and 6.00 m effective depth complete all as shown on drawings and as specified.

Lump sum price worked out by the Contractor for “EXCAVATION, EARTHWORK, SITE CLEARANCE, AREA DEVELOPMENT AND DEMOLITION” as listed in Schedule ‘A’ Part - II representing _______ % ______________ percent Above / Below the lump sum price of ₹24,88,572.99 inserted by the MES in Schedule ‘A’ Part - II

Lump sum price worked out by the Contractor for “ ROAD / PATH / CULVERT / HARD STANDING ” as listed in Schedule ‘A’ Part - III representing __________ % ____________ percent Above / Below the lump sum price of ₹93,30,882.20 inserted by the MES in Schedule ‘A’ Part - III

Lump sum price worked out by the Contractor for “ SEWAGE DISPOSAL ” as listed in Schedule ‘A’ Part - IV representing __________ % ____________ percent Above / Below the lump sum price of ₹9,22,093.40 inserted by the MES in Schedule ‘A’ Part - IV

Lump sum price worked out by the Contractor for " AREA DRAINAGE” as listed in Schedule ‘A’ Part - V representing _______ % __________________ percent Above / Below the lump sum price of ₹18,60,291.63 inserted by the MES in Schedule ‘A’ Part - V

Lump sum price worked out by the Contractor for "COMPOUND WALL AND GATES” as listed in Schedule ‘A’ Part - VI representing _______ % __________________ percent Above / Below the lump sum price of ₹72,59,293.86 inserted by the MES in Schedule ‘A’ Part - VI

Lump sum price worked out by the Contractor for "INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part - VII representing _______ % __________________ percent Above / Below the lump sum price of ₹21,93,936.04 inserted by the MES in Schedule ‘A’ Part - VII

Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part - VIII representing _______ % _________________ percent Above / Below the lump sum price of ₹77,84,881.80 inserted by the MES in Schedule ‘A’ Part - VIII

Lump sum price worked out by the Contractor for “EXTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part - IX representing _______ % _________________ percent Above / Below the lump sum price of ₹28,11,278.30 inserted by the MES in Schedule ‘A’ Part - IX

Lump sum price worked out by the Contractor for “EXTERNAL WATER SUPPLY ” as listed in Schedule ‘A’ Part - X representing ______ % _________________ percent Above / Below the lump sum price of ₹9,15,674.82 inserted by the MES in Schedule ‘A’ Part - X

Lump sum price worked out by the Contractor for “ LIGHTENING PROTECTION ” as listed in Schedule ‘A’ Part - XI representing ______ % _________________ percent Above / Below the lump sum price of ₹1,67,848.80 inserted by the MES in Schedule ‘A’ Part - XI

Lump sum price worked out by the Contractor for “ LIFT” as listed in Schedule ‘A’ Part - XII representing ______ % _________________ percent Above / Below the lump sum price of ₹73,57,805.50 inserted by the MES in Schedule ‘A’ Part - XII

Lump sum price worked out by the Contractor for “ FIRE FIGHTING SYSTEM” as listed in Schedule ‘A’ Part - XIII representing ______ % _________________ percent Above / Below the lump sum price of ₹27,052.00 inserted by the MES in Schedule ‘A’ Part - XIiI

Schedule 'A' Part - XIV This Schedule is not prepriced by MES and the prepriced rate indicated in Col - 5 as ₹0.00 indicates this fact only.The tenderer is required to quote their rates in Column 6. This Schedule constitutes Sl. Item No. 15.00 to 86.00

Taking down unserviceable DBs/switch fuse units any type carefully disconnecting and making good disturbed surfaces complete all as specified and directed.

INTERNAL WATER SUPPLY S&F bib taps with nozzle , cast copper alloy, chromium plated, Fancy type with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule, complete all as specified and directed. Make : Jaquar Cat Part No.CON-049NKN) or equivalent in makes HINDWARE / MARC / JOHNSON / SIEKO

S&F two way bib cocks with wall flange , cast copper alloy, chromium plated, Fancy type with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule, complete all as specified and directed. Make : Jaquar Cat Part No.ORP-10041PM) or equivalent in make in HINDWARE / MARC / JOHNSON / SIEKO

S&F CP single lever basin mixer with 450mm braided hoses for mixing hot & cold water for wash hand basin, chromium plated, screwed down high pressure, with lettered Hot & Cold with long screwed shanks and fly nuts screwed for iron pipe suitable for 15mm bore, complete all as specified and directed. Make : Jaquar Cat Part No.ORP-10011BPM) or equivalent in make HINDWARE / MARC / JOHNSON / SIEKO

S&F CP Single lever exposed parts kit of Hi - flow diverter consisting of operating lever, catridge sleeve, wall flange ( with seals), button assembly sleeve & button(wall mixer),complete all as specified and directed including the following :- Make : Jaquar Cat Part No.ORP-10079NKPM or equivalent in makes (i) Concealed body for single lever Hi-flow diverter with button assembly Make : Jaquar Cat Part No.ALD-079N or equivalent in makes (ii) CP Spouts with button attachment for hand shower with wall flange Make : Jaquar Cat Part No.SPJ-35463PM or equivalent in makes (iii) Telephonic type hand shower 100mm dia multi flow ( ABS body chrome plated with grey face plate) with rubit clearing system Make : Jaquar Cat Part No. HSH-1939 or equivalent in makes (iv) Flexible tube 8mm dia & 1.5m long with nuts Make : Jaquar Cat Part No.SHA-549D8 or equivalent in makes (v) Premium wall bracket for hand shower 35mm dia and 100mm long round shape Make : Jaquar Cat Part No.SHA-555 or equivalent in make HINDWARE / MARC / JOHNSON / SIEKO

S&F CP Single lever exposed parts kit of diverter consisting of operating lever, wall flange ( with seals), button (wall mixer),complete all as specified and directed including the following :- Make : Jaquar Cat Part No.ORP-10065NKPM or equivalent in makes (i) Concealed body for single lever diverter 40mm catridge with button assembly, catridge sleeve(button on top) Make : Jaquar Cat Part No.ALD-065N or equivalent in makes (ii) CP Spouts with button attachment for hand shower with wall flange Make : Jaquar Cat Part No.SPJ-35463PM or equivalent in makes (iii) Telephonic type hand shower 100mm dia multi flow ( ABS body chrome plated with grey face plate) with rubit clearing system Make : Jaquar Cat Part No. HSH-1939 or equivalent in makes (iv) Flexible tube 8mm dia & 1.5m long with nuts Make : Jaquar Cat Part No.SHA-549D8 or equivalent in makes (v) Premium wall bracket for hand shower 35mm dia and 100mm long round shape Make : Jaquar Cat Part No.SHA-555 or equivalent in make HINDWARE / MARC / JOHNSON / SIEKO

S&F Single lever sink mixture with swinging spout(Table mounted) with 450mm long braided hoses, chromium plated, fency type screwed for 15 mm bore pipe connection, complete all as specified Make : Jaquar Cat Part No.ORP-10173BPM) or equivalent in makes HINDWARE / MARC / JOHNSON / SIEKO

S&F CP Shower rose SINGLE FLOW 100mm DIA(ABS CP) ( Make : Jaquar Cat Part No. OHS-CHR-1989) including shower arm casted 190mm long light body', complete all as specified and directed Make : Jaquar Cat Part No.SHA-CHR-477) or equivalent in makes HINDWARE / MARC / JOHNSON / SIEKO

S&F CP bottle trap 32mm dia size with 300mm & 190mm long wall connection pipes including wall flange, complete all as specified and directed. Make : Jaquar Cat Part No.ALD-769L300x190) or equivalent in make HINDWARE / MARC / JOHNSON / SIEKO

S&F health faucet with 8mm dia and 1.20m long flexible chrome finish tube & wall hook', complete all as specified and directed. Make : Jaquar Cat Part No.ALD-573) or equivalent in make HINDWARE / MARC / JOHNSON / SIEKO

INTERNAL ELECTRIFICATION Supply & Fix, LED lamp 9 Watt B22 base for 230 Volt,complete all as specified and directed.

Supply & Fix, telephone Jack with shutter - RJ 11 ( One module), complete all specified and directed.

Supply & Fix, TV socket outlet female type complete with modulsr box and plate, complete all as specified and directed.

Supply and drawing,co axial cable for TV drawn through PVC conduit and making connections on both ends, complete all as specified and directed. Note: PVC conduit shall be measured and paid seperately.

Supply and drawing, telephone wire multi core cable of 0.5 mm dia 3 pair drawn through PVC conduit and making connections on both ends, complete all as specified and directed. Note: PVC conduit shall be measured and paid seperately.

Supply and fix telephone DB with locking arrangement suitable for 20 pair capacity with chrone 10 pair x 2 Nos and connecting cable,complete all as specified and directed.

Supply and fixing LED batten suitable for LED 1x20 watt, with all accessories pre-wired including LED Tube rod 1x20 Watts and making necessary electric connecitons to the fitting using flexible copper cable 3 core 23/0.0076 from ceiling rose to tube light fitting, complete all as specified and directed. Make : Bajaj, Cat -BLRB-DB118 or equivalent of Crompton/Havells.

Supply and fixing LED decorative wall mounting light fitting sutable for 9 w LED lamp B22 base including including LED 9 w Lamp and all accessories and fixing arrangement and making necessary electric connecitons to the fitting using flexible copper cable 3 core 23/0.0076 from ceiling rose to tube light fitting complete all as specified and directed. Make : Havells Cat - LHFOA JE1TZ11060 or equivalent of Crompton/Bajaj

Supply and fixing LED MIRROR LIGHT fitting 10 Watt wall mounted including LED Tube 10 Watts making necessary electrical connection to the fitting using flexible copper cable 3 core 23/0.0076 from ceiling rose to light fitting complete all as specified and directed. Make- Bajaj, Cat -BCLSB-10WH or equivalent of Crompton/Havells.

Supply and fixing external building security lighting luminaire 20 W LED 6000K high power lamps complete all accessories in die cast aluminium body IP-66 including necessary fixing arrangement with GI pipe Bracket and clamps, complete all as specified and directed. Make Havells/ Bajaj / CG

Supply, installation, testing and commissioning of Meter panel board (CPRI Approved) made out of 2 mm thick CRCA sheet steel enclosure indoor cubical type, double door with aprons, dust, vermin, weather proof duly powder coated with seven tank process and all as per IE rules, mounted on angle iron of size 50x50x6mm with two coats of black synthetic enamel paint over a coat of red oxide primer and height from ground level not less than 50 Cm including grouting with PCC on walls at stair case including necessary fixing complete with necessary compartments, fitted with 4 Nos TPN of aluminium bus bar 400 Amps with colour code sleeves mounted on porcelain/SMsC/DMC insulators, including internal control wiring with PVC insulated copper wire of suitable size and panel shall have comprise/including of following items:- (Type V Block for 14 Qtrs) (a) Aluminium busbar 400 amps 3 phase and neutral -1set (b) MCCB 200 Amps 415 Volts, 4 pole 25 KA - 1 Nos (Incommer) (c) MCCB 40-63 Amps 415 Volts,3 pole 16 KA -15 Nos (O/G for each Qtr ) (d) Dgital multi-function energy meter Tamper proof with electronic LCD display with polycarbonate cover, 3 phase, accuracy class 1.0, conformation with IS 13779, IP 54, current 10-60 ampere, 415 volts, 50 Hz, with parameters to show data, time, current reading, load,PF, voltage and KWH - 14 Nos. (e) Digitial VAF meter (0- 200 Amps,0-500 volts) with suitable CTs (f) Phase indication Lamp R Y B with toggle switch - 1 set Note: (i) Rate is inclusive for fixing the panel at stair case with PCC pedestal of height not less than 200 mm from FFL (ii) Rate is inclusive for writing Qtr No and affixing danger board on meter board complete. (iii) Size of meter board shall be got approved from GE as per site requirement.

Supply, installation, testing and commissioning of Meter panel board (CPRI Approved) made out of 2 mm thick CRCA sheet steel enclosure indoor cubical type, double door with aprons, dust, vermin, weather proof duly powder coated with seven tank process and all as per IE rules,mounted on angle iron of size 50x50x6mm with two coats of black synthetic enamel paint over a coat of red oxide primer and height from ground level not less than 50 Cm including grouting with PCC on walls at stair case including necessary fixing complete with necessary compartments, fitted with 4 Nos TPN of aluminium bus bar 400 Amps with colour code sleeves mounted on porcelain/SMsC/DMC insulators, including internal control wiring with PVC insulated copper wire of suitable size and panel shall have comprise/including of following items:-(Type IV (S) Block for 10 Qtrs) (a) Aluminium busbar 400 amps 3 phase and neutral -1set (b) MCCB 160 Amps 415 Volts, 4 pole 25 KA - 1 No (Incommer) (c) MCCB 40-63 Amps 415 Volts, 3 pole 16 KA -11 Nos (O/G for each Qtr ) (d) Digital multi-function energy meter Tamper proof with electronic LCD display with polycarbonate cover, 3 phase, accuracy class 1.0, conformation with IS 13779, IP 54, current 10-60 ampere, 415 volts, 50 Hz, with parameters to show data, time, current reading, load,PF, voltage and KWH-10 Nos. (e) Digitial VAF meter (0- 160 Amps,0-500 volts) with suitable CTs (f) Phase indication Lamp R Y B with toggle switch - 1 set Note: (i) Rate is inclusive for fixing the panel at stair case with PCC pedestal of height not less than 200 mm from FFL. (ii) Rate is inclusive for writing Qtr no and affixing danger board on meter board complete. (iii) Size of meter board shall be got approved from GE as per site requirement.

Supply, installation, testing and commissioning of Meter panel board (CPRI Approved) made out of 2 mm thick CRCA sheet steel enclosure indoor cubical type, double door with aprons, dust, vermin, weather proof duly powder coated with seven tank process and all as per IE rules,mounted on angle iron of size 50x50x6mm with two coats of black synthetic enamel paint over a coat of red oxide primer and height from ground level not less than 50 Cm including grouting with PCC on walls at stair case including necessary fixing complete with necessary compartments, fitted with 4 Nos TPN of aluminium bus bar 400 Amps with colour code sleeves mounted on porcelain/SMsC/DMC insulators, including internal control wiring with PVC insulated copper wire of suitable size and panel shall have comprise/including of following items:-(Type IV (S) Block for 11 Qtrs) (a) Aluminium busbar 400 amps 3 phase and neutral -1set (b) MCCB 160 Amps 415 Volts, 4 pole 25 KA - 1 Nos (Incommer) (c) MCCB 40-63 Amps 415 Volts,3 pole, 16 KA -12Nos(O/G for each Qtr) (d) Digital multi-function energy meter Tamper proof with electronic LCD display with polycarbonate cover, 3 phase, accuracy class 1.0, conformation with IS 13779, IP 54, current 10-60 ampere, 415 volts, 50 Hz, with parameters to show data, time, current reading, load,PF, voltage and KWH-11 Nos. (e) Digitial VAF meter (0- 160 Amps,0-500 volts) with suitable CTs (f) Phase indication Lamp R Y B with toggle switch - 1 set. Note: (i) Rate is inclusive for fixing the panel at stair case with PCC pedestal of height not less than 200 mm from FFL. (ii) Rate is inclusive for writing Qtr no and affixing danger board on meter board complete. (iii) Size of meter board shall be got approved from GE as per site requirement.

EXTERNAL ELECTRIFICATION Supply, installation, testing and commissioning of Street light panel outdoor type for Digital 24 Hrs time switch with 32 Amps 3 phase 415 Volt contactor, suitable relay and 40 Amps SPN MCB for automatic switch on and switch off, complete all as specified and directed. Make - Havells or equivalent of L&T / Legrand.

Supply and fixing of LED Street light 60 W IP 66 complete on poles all as specifed and directed. Make: Wipro cat No LR13-671-XXX-57-XX or equivalent of Havells/Crompton.

Supply & fixing of post top lantern with LED 45 W decorative post top LED, made in cast aluminium with decorative opal polycarbonate diffuser with IP 65 protection, complete all as specifed and directed. Make: Wipro Cat Part - LP02-501-XXX-57-XX or equivalent of Havells/Crompton.

S & F pole mounting boxes( DB) factory made of FRP heavy duty internal dimention not less than 250x200x105mm, complete all as specified and directed. comprising with the following :- (a) MCB SP 6 Amps 240 Volts-01 Nos (b) Three phase copper connector on porcelain insulators complete including suitable size of MS clamps as per site requirement - 02 Nos, nut and bolts etc. Make: Sintex or National ISI marked

S&F 40 mm dia light grade GI pipe bracket 1.2 mtr long bend to shape including clamps made out of 50 x 6 mm flat iron duly painted with two coats of aluminium paint over a coat of red oxide primer, suitable size nuts, bolts and washers, complete all as specified and directed.

Supply and fixing cable path indicator made of cast iron plate of size 150 mm dia and 4 mm thick indicating cable size and voltage. Cast iron path indicator shall be fixed on MS angle iron of size 30 mm x 30 mm x 5 mm and 900 mm long with two Nos, nuts and bolts of suitable size, complete all as specified and directed.

Material and labour for cutting of bituminous road / floor for laying of pipe / cables not exceeding 20cm wide and not exceeding 45 cm deep including refilling with material and, watering well ramming / compacting and making good with premixed bituminous macadam, 150mm thick complete all as specified and directed.

Supply, installation, testing and commissioning of new LT panel board (CPRI Approved) made out of 3 mm thick CRCA sheet steel enclosure OUTDOOR cubical type, double door with aprons, dust, vermin, weather proof duly powder coated with seven tank process and all as per IE rules,mounted on angle iron of size 50x50x6mm with two coats of black synthetic enamel paint over a coat of red oxide primer and height from ground level not less than 50 Cm including grouting with PCC 1:4:8 type D2 40 mm graded stonre aggregate including necessary excavation and earth work complete with necessary compartments, fitted with 4 Nos TPN of aluminium bus bar 800 Amps with colour code sleeves mounted on porcelain/SMsC/DMC insulators, including internal control wiring with PVC insulated copper wire of suitable size and panel shall have comprise/including of following items :- (Main LT panel near Transformer) (i) Bus bar :- Aluminium Bus bar 800 Amps for 3Ph and neutral -01 Set (ii) Incoming :- MCCB 630 Amps, 4 Pole, 415 volt, 36 kA with Adjustable thermal & fixed magnetic - 01 No

Supply, installation, testing and commissioning of new LT panel board (CPRI Approved) made out of 3 mm thick CRCA sheet steel enclosure OUTDOOR cubical type, double door with aprons, dust, vermin, weather proof duly powder coated with seven tank process and all as per IE rules,mounted on angle iron of size 50x50x6mm with two coats of black synthetic enamel paint over a coat of red oxide primer and height from ground level not less than 50 Cm including grouting with PCC 1:4:8 type D2 40 mm graded stonre aggregate including necessary excavation and earth work complete with necessary compartments, fitted with 4 Nos TPN of aluminium bus bar 400 Amps with colour code sleeves mounted on porcelain/SMsC/DMC insulators, including internal control wiring with PVC insulated copper wire of suitable size and panel shall have comprise/including of following items :-(DG Set panel) (i) Bus bar :- Aluminium Bus bar 400 Amps for 3Ph and neutral -01 Set (ii) Incoming :- MCCB 250 Amps, 4 Pole, 415 volt, 36 kA with Adjustable thermal & fixed magnetic - 01 No

Supply, installation, testing and commissioning of new LT panel board (CPRI Approved) made out of 3 mm thick CRCA sheet steel enclosure OUTDOOR cubical type, double door with aprons, dust, vermin, weather proof duly powder coated with seven tank process and all as per IE rules,mounted on angle iron of size 50x50x6mm with two coats of black synthetic enamel paint over a coat of red oxide primer and height from ground level not less than 50 Cm including grouting with PCC 1:4:8 type D2 40 mm graded stonre aggregate including necessary excavation and earth work complete with necessary compartments, fitted with 4 Nos TPN of aluminium bus bar 600 Amps with colour code sleeves mounted on porcelain/SMsC/DMC insulators, including internal control wiring with PVC insulated copper wire of suitable size and panel shall have comprise/including of following items :-(Bldg panel type V) (i) Bus bar :- Aluminium Bus bar 600 Amps for 3Ph and neutral -01 Set (ii) Incoming :- MCCB 350 Amps, 4 Pole, 415 volt, 36 kA with Adjustable thermal & fixed magnetic - 01 No

Supply, installation, testing and commissioning of new LT panel board (CPRI Approved) made out of 3 mm thick CRCA sheet steel enclosure OUTDOOR cubical type, double door with aprons, dust, vermin, weather proof duly powder coated with seven tank process and all as per IE rules,mounted on angle iron of size 50x50x6mm with two coats of black synthetic enamel paint over a coat of red oxide primer and height from ground level not less than 50 Cm including grouting with PCC 1:4:8 type D2 40 mm graded stonre aggregate including necessary excavation and earth work complete with necessary compartments, fitted with 4 Nos TPN of aluminium bus bar 600 Amps with colour code sleeves mounted on porcelain/SMsC/DMC insulators, including internal control wiring with PVC insulated copper wire of suitable size and panel shall have comprise/including of following items :-(Bldg panel type IV (S)) (i) Bus bar :- Aluminium Bus bar 600 Amps for 3Ph and neutral -01 Set (ii) Incoming :- MCCB 350 Amps, 4 Pole, 415 volt, 36 kA with Adjustable thermal & fixed magnetic - 01 No

EXTERNAL WATER SUPPLY Supply and fixing of cast iron foot valve 80 mm dia complete all as specified and directed.

Supply, installation, testing and commissioning of electric driven monoblock pump set 12.5 HP, 3 phase, 415 volt, discharge 9 LPS at head not less than 50 metre with necessary accessories,complete and all as specified and directed.

Supply, installation, testing and commissioning of LT panel board (CPRI Approved) made out of 2.00mm thick CRCA sheet steel enclosure INDOOR cubical type, double door with aprons, dust, vermin, weather proof duly powder coated with seven tank process and all as per IE rules,mounted on angle iron of size 50x50x6mm with two coats of black synthetic enamel paint over a coat of red oxide primer and height from ground level not less than 50 Cm including grouting with PCC 1:4:8 type D2 40 mm graded stonre aggregate including necessary excavation and earth work complete with necessary compartments, fitted with 4 Nos TPN of aluminium bus bar 400 Amps with colour code sleeves mounted on porcelain/SMsC/DMC insulators, including internal control wiring with PVC insulated copper wire of suitable size and panel shall have comprise/including of following items :- (i) Bus bar :- Aluminium Bus bar 200 Amps for 3Ph and neutral -01 Set (ii) Incoming :- MCCB 63 Amps, 3 Pole, 415 volt, 25 kA with Adjustable thermal & fixed magnetic - 01 No

LIGHTENING PROTECTION S&F porcelain earthing insulators on roof and wall for mounting of aluminium strip,complete all as specified and as directed.

CCTV CAMERA Supply and fixing of full colour IP CCTV day/night vision 2 MP camera indoor type,complete all as specified and directed.

Supply and fixing of full colour IP CCTV day/night vision 2 MP camera outdoor type,complete all as specified and directed.

Supply and fixing lan switch 16 Port,complete all as specified and directed.

Supply and fixing adapter for DC power supply (4 Amp),complete all as specified and directed.

Supply and fixing Network video recorder (NVR) 16 chanel including with mounting rack,complete all as specified and directed.

Supply and fixing 4 terabite (TB) hard disk drive,complete all as specified and directed.

Supply and installation of FHD monitor of size 40" with brackets for wall mounting,complete all as specified and directed.

M & L for CCTV Co-axial cat-6 copper cable complete with necessary connections,complete all as specified and directed.

M & L for PVC casing caping size 2.5" for camera cables,complete all as specified and directed.

DGSET Supply, installation, commissioning and testing of silent diesel engine driven Generator set 100 KVA (80 KW at 0.8 PF) capacity 415 volt 3 phase 4 wire, water cooled, with acoustic weather proof enclosure as per CPCB norms and noise level shall not exceed 75dB at a distance 1 metre, engine as per IS -10001/10002 and alternator as per IS-13364 or as ammended upto date, mounted on channel iron base frame including AMF control panel complete incl PCC plateform as per manufacturer guide line comprises the following components:-

(A) Diesel engine :-Diesel Engine developing 126.4 BHP, 1500 RPM, water cooled engine complete with all standard accessories including first fill of R Lube Oil as recommended . Make :- Greaves India/Cummins/Kirloskar Electric/Ashok Leyland/CATERPILLAR (B) Alternator:- Alternator suitable for continuous operation generating 100 KVA (80 KW) at 1500 RPM 415 volts, 0.8 PF (lag), 3 Phase 4 wire system 50Hz system self excited, self regulated with ball bearings confirming to IS-13364. Make : STAMFORD/Jyoti/ Crompton/Caterpillar (C) Acoustic Enclosure:-Made out of Powder coated weather proof canoy, Engine and alternator mounted on AV mounts, with silencer and exhaust below optimised to meet stringent MOEF/ CPCB norms for sound and emission. And also Equipped with Baserail with drawout fuel tank, drainplug, inlet and outlet connections, air vent, level guage. (D) Control Panel : Fabricated from CRCA sheet and powder coated with RAL 9003 with the following: Suitable circuit breaker. Controller with multi feature display. Load on and set running indication lamps. Suitable copper conductor cables between alternator and control panel. and as per IS. (E) Battery:- Battery 12 V/ 88 AH including Copper Terminal cables and connected accordingly.

(F) AMF Panel :- AMF Panel factory made indoor cubical type front openable fabricated out of MS sheet steel 1.6mm thick complete as per manufacture specification suitable for DG Set of capacity 100 KVA grouted in floor PCC foundation and consisting of suitable switch gear, contactor, relay, AVR, metering equipment, saftey devices, energymeter, including control wiring from AMF panel to DG set control panel:-and all as specified for functional requirement in IS. Note : AMF Panel should have manual auto and by- pass arrangement in case of failure.

FIRE FIGHTING SYSTEM Supply and fix fire hydrant landing valve type A (Single headed outlet) 63mm dia gunmetal conforming to IS : 5290 - 1993,complete all as specified and directed.

Supply and fix gun metal branch pipe 63 mm dia instantaneous inlet, made threaded outlet, 12.5 mm bore nozzle short conforming to IS 903, complete all as specified and directed.

Supply and fix 63 mm dia 15 mtr long hose confirming to IS 636 complete with male anf female coupling confirming to IS 903, complete all as specified and directed.

Supply and fix hose box of keeping 02 Nos hose pipe of length 15 mtr each, branch pipe nozzle, coupling etc of MS sheet of thickness 2.0 mm, complete all as specified and directed.

Supply and fix hose real of 20 mm dia and 30 metre length confirming to IS 5131, complete all as specified and directed.

Supply and fix branch pipe with nozzle of 20 mm dia for hose reel confirming to IS 8090, complete all as specified and directed.

Supply and fix hose box for hose reel of 20mm of 30 mtr length complete with coupling branch pipe and nozzle, fabricated from MS sheet 2 mm thickness, complete all as specified and directed.

Supply and fix fire hydrant stand post with provision of single outlet confirming to IS 908, complete all as specified and directed.

Supply and fix MS cabinet (approx 750mm x 600mm x 450mm ) to enclosure fire brigade inlet connections fabricated from 16 gauge sheet with full front glass door and locking arrangement painted and mounted on masonry platform, complete all as specified and directed.

Supply and fix Gun metal fire brigade inlet connection (suction collecting head) consisting of four nos. 63mm dia instantaneous type male coupling with built in check valves and 150mm dia sluice valve (one no. 150 mm dia NRV), and 150 mm dia flanged outlet ,with all accessories, complete all as specified and directed.

Supply and fix automatic air release valve 50 mm dia suitable for domestic water with 50mm gun metal stop valve, complete all as specified and directed.

Supply and fix pressure guage 100mm dia with ball valve of pressure 25 Kg/sq.cm, complete all as specified and directed.

Supply and install booster pump 36 mtr head discharge 900 LPM, complete all as specified and directed.

Supply and fix MS flanged pipe 80 mm NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer,, complete all as specified and directed.

Supply and fix MS flanged pipe 100 mm NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer, complete all as specified and directed.

Supply and fix MS flanged pipe 150 mm NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer, complete all as specified and directed.

Supply and fix 100 mm bore hand operated butterfly valve of pressure not less than 15 Kg/Sq.cm. withb complete set, complete all as specified and directed.

Supply and fix 150 mm bore hand operated butterfly valve of pressure not less than 15 Kg/Sq.cm. withb complete set, complete all as specified and directed.

All as per item No. 84 but for second year (13 to 24 months) after expiry of defects liability period of 24 months (i.e. for one year after completion of first year maintenance period vide item No.84 above)

All as per item No. 84 but for third year (25 to 36 months) after expiry of defects liability period of 24 months(i.e. for one year after completion of second year maintenance period vide item No.85 above) NOTE: i) The comprehensive maintenance shall be for a period of 36 months wef satisfactory completion of defects liability period of 24 Months ii) The contractor shall be responsible for periodical maintenance , as per manufacturers instruction for smooth running of lifts.& no any T&Ps shall be provided by department. iii)Maintenance of all maintenance record shall be responsibility of contractor & no stationary shall be provided by department. Formats of all record books shall be decided by GE. iv) Contractor shall ensure the neat & cleanliness of all equipments & lift cabins and their premises.

N. H. Saluji & Associates

Kanika Construction Company

Sharda Infratech

M.R.Mutha Engineers

Beejay Associates Contracts Pvt Ltd

Hariom Projects Pvt Ltd

surendra infrastructure pvt ltd