NIT-60(Sl-12)25-26 Date-26.02.2026

ismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the (a) Depth of excavation not exceeding 1500 mm.

Filling in foundation or plinth by silver sand in layers not exceding 150min as directed and consoledating same by through 3 saturation with water ramming complete, includig the post of supply of sand. (Payment to be made on basis of measurement of finished quantity of work

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (f) 25 mm to 30 mm shuttering without staging in foundation,

Page-24, Item- 4(a) Ordinary cement concrete (mix 1:2:4) with grade stone chips (20mm down excluding shuttering and reinforcement. If any in ground floor as per relevent IS Codes (a) Pakur Variety

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.

Page No.-240, Item No.-3.16 Box cutting or filling in Road embankment in all sorts of soil including spreading the spoils properly over the flank as necessary or on berm to approximate grade & camber and rolling the sub-grade with power roller to proper camber and grade as per direction and satisfaction of Engineer-in-charge including uprooting and removing plants and jungles when and where necessary

Page-105. it-16 volume -i M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round/square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in-charge.

Installation of display board for showing details of scheme under bolpur municipality

ADD 18 % GST

ADD 1% CESS