CERTAIN BR MAINTENANACE WORKS INCL CLEANING OF SEWAGE LINE MANHOLES SEPTIC TANKS AND SOAK WELLS INCL PERIODICAL SERVICES ETC UNDER AGE BRI OF GE NAGROTA AT 213 TRANSIT CAMP

Amount

SCHEDULE A PART-I S & F in repairs, Fancy Type CP long body bib tap cast copper alloy with crutch or butterfly handle 15mm bore screwed down screwed for iron pipe complete all as specified and directed

S & F in repairs,Fancy type Bib tap, cast copper alloy with crutch or butterfly handle 15mm bore screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S & F in repairs,Bib tap15 mm standard of PTMT any colour screwed for iron pipe (Minimum weight 15mm-90 gms) complete all as specified and directed

S&F in repairs, CP brass wall/WHB mixer for cold and hot water screwed down 15mm bore all as specified and directed

S/F in repairs 15 mm dia wall Bend mixer brass chromium plated fixed to existing pipe/connections cluding telephonic hand shower and all necessary fittings all as specified and directed by Engr In Charge

Supply and fixing in repairs for 15mm bore CP brass jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable complete all as specified and directed at site

S & F in repairs,15 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms complete all as specified and directed

S & F in repairs,20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s. complete all as specified and directed

S & f INTowel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190gms) complete all as specified and directed

Material and labour for repairing of PVC low level/high level flushing cistern by changing its internal fitting complete all as directed at site.

S & F of Rotational moulded polyethylene (three layer) water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 litres all as specified in SSR Part-I.

All as per item No -12 here in before but 1000 litres.

S/F in repairs of glass shelf assembly corner/Straight consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as directed.

S/F in repairs of Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) all as directed.

S & F in repairs,15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repairs,15mm bore CP brass angle stop valve/cock cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S & F in repairs,15mm bore CP brass stop cock fancy type, chromium plated with iron long shank and cup Concealed type complete all as specified and as directed.

S & F in repairs, Waste coupling PTMT chromium plated (Half or full tread) for wash hand basin with long screwed shanks and fly nuts fixed in repair 40mm-60gms complete all as specified and as directed.

S & F in repairs,32 mm bore PVC waste pipe flexible including PVC waste coupling with minimum length 800mm, complete all as specified and as directed.

S & F in repairs, PVC valve less symphonic action type, flushing cistern, low level, white of capacity 10 ltrs with inlet , ball valve, float and and fixing arrangement ccomplete all as specified and as directed.

S & F in repairs,Wash basins, vitreous china white (flat back type) of size 550x400 mm , excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed as in repair complete all as specified and directed by Engr-in-Charge.

S & F in repairs,Wash basins, vitreous china white (Angle back type) of size 400x400 mm , excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed as in repair complete all as specified and directed by Engr-in-Charge.

S & F in repairs,Wash basins, vitreous china white of oval shape counter top, excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed as in repair complete all as specified and directed by Engr-in-Charge.

S & F in Vitreous china squatting pan “Orrisa” pattern of size 580mm “White” with 'P' or 'S' Trapfront or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe), connection to trap and to flushing pipe anti- syphonage pipe etc complete making good complete all as specified and as directed by Engineer-in-charge

S & F Vitreous china wash down closet pan (Pedestal pattern) white with ‘S’&'P' trap plastic seat cover white including connection to out going pipe & to flushing pipe, anti syphonage pipe etc complete all as specified and directed by Engineer-in-charge (including making good to floor and fixing in repairs)

S & F Stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plug, washer, waste pipe etc including cast iron brackets, connecting union over all size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified and as directed.

S & F in repairs,Plastic water closet seat cover, white closed pattern with flat bottom and cover and Brass chromium plated hinging device. complete all as specified and as directed.

S & F in repairs,125 mm dia Fancy type shower rose with arm swivel type fixed to 15mm dia pipe complete all as specified and as directed.

Taking down steel tubing and connections including removing from site of 15mm bore pipe complete all as specified and directed.

All as per item No 30 above but 20mm bore complete all as specified and directed.

S&F 15mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.

All as per item No 32 bove but 20mm bore

S & F Flush pipe (Long/Short Bend) of polyethylene of low or high density of PVC, 32mm dia for low level cistern fixed in repair

M & L for 12 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed in wooden/aluminium frame work complete all as specified & directed

S & F in repairs,125mm long safety type aluminium anodized hasp and staples complete all as specified & directed

S & F in repairs,Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified & directed

S & F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter of 851 to 1000mm in width & of weight between 61 to 81 kg aluminium extruded section body complete all as specified and as directed.

M & L for 12mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces complete all as specified and as directed.

M & L for 19/20mm thick block board Grade I quality exterior grade, decorative type with decorative face veneers on one face for cupboard etc complete all as specified and as directed.

M & L for 9mm thick plywood grade BWR type BB No of ply 5 complete all as specified and as directed.

M & L for Second class hard wood plain fillets, square, rectangular or triangular in section, and secured with nails or screws, clean sawn and sectional area exc 13 Sq cm and not exc 25 Sq cm complete all as spd.

M & L for 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc. 0.50 sqm in each pane complete all as specified & directed

M & L for 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane including hacking out old glass panes complete all as specified & directed

M & L for 4mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm each pane complete all as specified and as directed.

S & F in repairs, 75 mm long Butt hinges, (ISI marked) medium weight cold rolled mild steel fixed with screws or welding fixed in repair including taking down shutter and refixing in same position complete all as specified and as directed.

S & F in repairs, All as per item No 47 here in before but 100 mm long complete all as specified and as directed.

S & F in repairs, Mild steel Helical door springs including roller plate complete of 150mm long complete all as specified and as directed.

S & F in repairs, Floor door stopper 150MM of aluminium alloy body and tongue anodized with double rubber fixed in repair complete all as specified and as directed.

M & L for, Galvanised mild steel wire cloth 0.457mm nominal dia of wire and average width of aperture 1.18mm and fixed with wooden/MS beads complete all as specified and as directed.

Demolition of Concrete (Unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spd and directed

M & L for 25 mm thick PCC 1:2:4 type B-0 (12.5 mm graded crushed stone aggregate) as a sub base to receive topping layer finished even and rough complete all as specified and as directed.

Demolition of stone slabs of any description or thickness in kitchen platform, floors,aprons laid, bedded,pointing in any mortar etc complete all as directed.

M&L of Machine cut kota stone flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) (Each stone not less than 55 cms x 55 cms) over 15mm thick screed bed in CM ( 1:4) as in floor finished rough including roughening of existing surfaces by pick axicess and applying a coat of cement slurry @ 03 Kg/Sqm of surface. complete all as specified and as directed.

M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over 15mm thick screed bed in CM ( 1:4) complete all as spd and directed

S&F Non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11sqm but n exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or beddding layer of CM 1:4 including complete all as spd and directed.

M & L Glazed ceramic tiles coloured (Premier quality) in vertical surface of size 300mm x450 mm x 7mm thick jointing in neat cement slurry and pointing in colour cement to match including incl 10mm thick screed bed/bedding layers in cm 1:4 complete all as specified and as directed.

M & L for Virified Ceramic tiles 10 mmthick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm,as in patches in floors, set and jointed with cement slurry and pointed with white or coloured cement to match with tiles over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M & L for 25 mm dia aluminium anodised dreproy rod with hanging and side brackets powder coated textured finish and wall thickness 1mm complete designed and patterned as approved by Engr-In-Charge

M & L for 20 mm dia Harrison rails, mild steel, chromium plated with fixing brackets stops, rollers etc.steel dreproy rod with hanging and side brackets wall thickness 1mm complete and patterned as approved by Engr-In-Charge

Supply and fixing 125mm dia steel grating fixed in position complete all as specified and as directed.

S & F in repairs, PVC cover/lid for PVC over head water tank suitable for capacity of above 500 ltrs and upto 1000 ltrs capacity complete all as specified and as directed.

Supply and fix for PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.

Supply and fix for factory made PVC door shutter 30mm thick (style) consisting of frame made out MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and as directed.

M & L for Attending complaint for repair to easing of any type of Doors/window/cup board shutters incl Alu doors by tightening of hinges/handles/aldrop bolt/tower bolt/knobs, hasp and staple etc of any size/ any number of panels for easy closing/opening or changing the position of hinges, adjustments of tower bolts, sliding bolts, replacement of looking mirror, curtain rod etc complete including replacement of minimum defective item if required, complete all as specified and directed by Engr-in-Charge.

M & L for Petty repair to existing steel window/rolling shutters, pressed steel frame rat tails spring, steel almirah, mortise lock fitted in steel almirah and fixing wire mesh on steel windows by welding in situation and in any floor and including hinges 100mm medium weight to chowkhats after taking down door/window shutter and refixing in position and making functional (welding rod welding machine, small fittings such as windows handle, hinges etc will be provided by the contractor removing the steel window shutters from the frame and re-fixing after making serviceable complete complete all as specified and directed by Engr-in-Charge.

M & L for Attending complaints related to plumber/ water supply and obtaining completion from user, this includes minor repair of taps by replacement of washer/jumpers, tightening of taps, tightening of check nuts of PVC connection and making water supply functional in case of blockage, redressing of GI pipe joints if any leakage is found, repair of unfunctional PVC flushing cistern, repair/ replacement of face mohra etc including materials like GI fittings of reqd size M.Seal, safeda, sootar and washers etc, (Replacement of taps, PVC connections/ face mohra's of any description & any other material shall be paid separately as supply only.)

Demolition of brick work or stone masonry, built in CM including all quoins, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articlescomplete all as specified.

M & L for Brick work with sub class B (old size) brick straight or curved on plan exc 6 m mean radius in CM 1:4 complete all as specified.

All as item no 71 above but except bricks

S & F in repairs Aluminium anodised handle extruded section and fixed of size 150mm all as specified and directed

S & F Aluminium anodised barrel tower bolts extruded section and fixed in repairs of size 150 mm all as specified and directed

S & F in repair Floor door stopper 150 mm size of aluminium alloy body and tongue anodized with double rubber complete all as specified and as directed.

M & L for Preparing of Old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.

M & L for Preparing of New or previously painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of primer complete all as specified and directed by Engineer-in-charge.

Supply and fixing PVC bath room mirror cabinet fixed to wall with screw and rawl plugs, fixed as in repair complete all as specified and directed .

Supply and fixing 600mm x 750mm x 250mm plate rack stainless steel with steel shelves, made out of 1mm thick sheet and hanging arrangement, complete all as specified and directed.

Supply and fixing soap dish of cast copper alloy, chromium plated (CP), fixed as in repair complete all as specified and directed.

Supply and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Repairing of old chromium plated bib taps, pillar taps, wash hand basin mixture, stop cock, angle valve, concealed stop cock and similar items by changing its brass phases and making it functional to the entire satisfaction of user and Engineer-in-Charge complete all as directed at site

Material and labour for repairing of existing floor trap by cleaning and refixing the same in cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate of size 100mm dia complete all as directed.

Cleaning of blocked WC/ bath rooms/ kitchen gully traps including and upto first manhole by removing all choked waste in the pipe complete all as directed at site

Opening of air block/blockage of Gi pipe from outlet of water tank to all internal fitting to enable to smooth flow of water from bib tap/shower/WHB piller taps/stop cock complete by air pressure/water gravity pressure etc complete all as directed and specified.

Taking down existing old tarfelt, bituminous compound including cleaning & removing debris to a distance exc 100 m n.exc.250m. complete all as specified and as directed.

M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement complete all as specified Note:- WPC Mesured and Paid Separately.

Supply only for liquid water proofing compound.

M&L for Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces complete all as spd & directed.

M&L for Applying evenly a tack coat of induatrial bitumen 85/25 grade @ 1.2 Kg/Sqm complete all as specified and as directed..

M&L for One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing(Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions (ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions (iii) The make of polymeric membrane shall be IWL India Ltd chennai. Ltd or "MOPLY FP" of Texsa India Ltd). NOTE : S&F of APP based polimeric membrane of approved manufacturer will be laid/fixed by authorised person of the same manufacturers units asper relevent IS.

M & L for Applying one coat of aluminium paint on top of APP membrane complete all as specified and as directed.

Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 100mm.

S&F 110mm dia PVC pipe single socketed in any length with rubber ring joints, fixed to walll and in trenches or in floors, fixed in repairs.complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 75mm bore.complete all as specified and as directed.

S&F PVC (SWR) Bends any radius for 110mm bore.complete all as specified and as directed.

S&F PVC (SWR) Bends any radius for 75mm bore with oval access door.complete all as specified and as directed.

S&F in repairs Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof for 100 mm bore complete all as specified and as directed.

M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, et Exc 250 and n exc 500 ltr complete all as specified and as directed..

M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, et Exc 500and n exc 1000 ltr complete all as specified and as directed..

M & L PCC 1:2:4 type B-0 (12.50mm graded aggregate) as in padding finished even and smooth without using extra cement all as specified and directed.

Taking down chowkats or frames exceeding n.exc. 1.5 Sqm each with shutters (without taking off shutters from the frames) all as specified and directed

Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each all as specified and directed

Taking down chowkats or frames exceeding 1.5 Sqm and n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) all as specified and directed

S & F 35mm thick plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered board with commercial veneering on both faces. The size of rail and stile as per IS -1003 (Part-I) klin seasoned and chemically pressure treated complete all as spd and directed (2nd class hard wood rail and stile) all as spd & directed.

S & F 35mm thick glazed & skeleton shutters of 2nd class hard wood, open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as spd in SSR Part-I section 8 clause 8.2 (A) complete all as spd

M & L Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm complete all as specified and directed

M & L Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm complete all as specified and directed

S & F 300 mm long aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminum alloy & fixed

S & F in Aluminum anodized handles fabricated type of 150mm long all as specified.

M & L Box type Steel window side hung double shutters with provision for desert cooler/AC(inside for wire mesh & out side for glass), including guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded and fixed, steel window shall be conforming to relevant IS complete all as shown on drawing No CEUZ/TD/1302/09, Sh 1/3 to 3/3 and directed. Note:- Wire mesh and sheet glass shall be measured and paid separately

M & L Box type Steel ventilators top hung double shutters (inside for wire mesh & out side for glass), including hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS all as specified. Note:- Wire mesh and sheet glass shall be measured and paid separately

M & L for, Preparing of new untreated steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.

18/19 mm thick solid PVC board, as in cupboard shutters, partition walls and shelves fixed with frame complete all as specified and directed.

M & L fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc including taking down or and making good of disturbed surface all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370).Make- Jinal Section,

M/L 75 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite stone aggregate) in base of flooring/ hard standing finished evern & smooth w/o using extra cement..complete all as specified and as directed.

M & L for 20mm thick screed screed bedding in cement mortar 1:6 as in sub base complete all as specified and as directed.

M & L Chequered cement concrete tiles of size 30cm x 30cm x 20 to 22 mm thick glossy finish coloured and pattern in patches in floor with set & jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over with grey cement and no pigment complete all as specified and directed.

Preparation of surfaces incl brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts over all decorated plastered or un plastered surfaces of wall incl cornices etc and applying one coat of white wash upto four storie build complete all as specified and directed by Engineer-in-charge.

All as per item No 120 here in before but applying two coats of white washing

All as per item No 120 here in before but applying one coats of white washing on ceiling.

All as per srl item No 120 here in before but applying one coat of cement base paint on walls.

All as per srl item No 120 here in before but applying two coat of cement base paint on walls.

All as per srl item No 1 here in before but applying one coat of oil bound distemper on wall.

All as per srl item No 120 here in before but applying two coat of oil bound distemper on wall.

M & L preparing new plastered surfaces of walls and applying Finishing of wall with acrylic smooth exterior paint of required paint of required shade new work (two or more coat applied @ 1.67ltr/10Sqm and including priming coat of exterior primer applied @ 2.2 Kg/10 Sqm).

M & L for complete removal of existing trreatment preparing old plastered surfaces of walls and applying Finishing of wall with acrylic smooth exterior paint of required paint of required shade new work (two or more coat applied @ 1.67ltr/10Sqm and including priming coat of exterior primer applied @ 2.2 Kg/10 Sqm).

M & L for Preparation of newly plastered surfces of walls and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over a coat of wall care putty 3mm thick complete all as specified and as directed.

M & L for Preparation of Complete removal of existing trreatment preparing old plastered surfaces of walls and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over a coat of wall care putty 3mm thick complete all as specified and as directed.

M & L Preparation of newly plastered surfces of Ceiling and applying two coats of oil bound distemper over a coat of wall care putty 3mm thick complete all as specified and as directed.

M & L for Preparation of Complete removal of existing trreatment preparing old plastered surfaces of Ceiling and applying two coats of oil bound distemper over a coat of wall care putty 3mm thick complete all as specified and as directed.

Taking down cement plaster on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc., all as specified.

M & L 15mm thick plastering in CM 1:4 on stone surfaces (EXTERNAL), surface finished even and smooth without using extra cement, all as specified.

M& L 15mm thick plastering in CM 1:6 on stone surfaces (INTERNAL), surface finished even and smooth without using extra cement.

M&L rendering 5mm thick in cm (1:3)as in ceiling , soffit of chajja etc.complete all as specified.

Preparing of previously painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.

M & L for Cleaning/clearing of sewage line (including manholes except 1st manhole) 100mm to 350mm bore of any description under ground any depth, removing any type of blockage including desilting, descaling and de-chocking from drain with combined high pressure water jetting cum suction (vacuum) type machine mounted on LMV/HMV having facility of high pressure vacuum including provision of hydraulic application through high pressure thermoplastic fiber based water jetting hose and through conical round shaped nozzle pipe and flushing after cleaning including clearing of manhole, sludge water shall be disposed of directed including taking of manhole cover and re-fixing the same after cleaning.

Dewatering/Desludging & cleaning of manhole of any depth, any size, taking out water mixed with sludge and solid sludge including any foreign materials such as stones, tree hedges etc, removing and depositing sludge at a distance not less than 20 meter in a ditch including necessary excavation of pits and covering with earth & spraying unslaked lime on the covered ditch as well as around the manholes to make hygienic including necessary flushing of manholes with water after desludging complete all as specified and directed.

Taking out/Pumping out contaminated sewage water from septic tank/soakage well including inlet/outlet chamber after plugging incoming sewage line through combined high pressure water jetting cum suction (vaccum) type machine mounted on HCV Honey succer vehicle of capacity not less than 6000 ltrs each and facility of high pressure vaccum and removing off the same in the pit to a placet all as directed by Engineer-n-Charge. Note;One lorry unit will be considered for full load of 6000ltrs irrespective of taking out.

Desludging the solid sludge from septic tank, soakage well including inlet/outlet chamber, removing out all scum, silt reduce sludge (both organic/inorganic nature) after plugging the incoming sewage line through combined high pressure water jetting cum suction (vacuum) type machine mounted on LMV/HMV and facility of high pressure vacuum and removing and dumping off the same in the tank to a place out side cantonment at the place marked for the purpose by local municipality or area controlling authority complete all as specified and directed.

Cleaning of soil waste pipe (cast iron/PVC/SGSW/DWCP )150/200mm bore laid in ground any slope or gradient and depth 3 mtr by roding taking out all residue from the lines/manholes including water and depositing at a distance not less than 20 mtr in ditch finally covering the ditch with earth and spraying unslacked lime on the covered ditch as well as around the manholes to make hygienic including excavation of ditch testing of line by flushing water after cleaning etc complete all as specified and directed by Engineer-in-Charge.

M & L for Cleaning/clearing of IWC/ EWC, gully trap /floor trap including CI pipe / PVC pipe upto first manhole by roding, taking out all residue including waste and testing by pouring water after cleaning etc complete all as specified and directed by Engr-in-Charge. (Note: Cleaning of PVC/CI pipe from first floor / ground floor embedded in floor or fixed to wall included in this item) complete all as specified and directed.

S & F of Cast iron oval access covers / inspection cover with bolts rubber gasket to make it water tight for 75mm/100mm bore CI fittings including taking out broken/ unserviceable cover with bolts etc and removing from site complete all as specified and as directed.

Excavation in trenches in any type of soil not exceeding 1.5m wide and not exceeding 1.5m wide for foundation etc or for shaft, wells, cesspits, manhole, pair house etc not exceeding 10 Sqm on plan and not exceeding 1.5 m depth and getting out in any type of soil complete all as specified and directed.

Returning filling in including, spreading, leveling watering and well ramming in layer not exceeding 25cm in each layer complete all as specified and directed.

Removing excavated material not exceeding 50 M and depositing where directed at level not exceeding 1.5m above the starting pointing complete all as specified and directed.

M & L for Plain cement concrete 1:4:8 as in foundation type D-2 (using 40mm graded crushed stone aggregate) as in fdn filling or mass concrete complete all as specified.

M & L for Plain cement concrete 1:2:4 type B-1( using 20mm graded aggregate) as in benching, coping including watering slightly rounded or chamfered angles and throating including necessary form work complete all as specified.

M & L for TMT mild steel bars 10MM dia and over cut to length bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire annealed 0.9 mm dia or securing with clips all as specified and directed.

M & L for Mild Steel TMT bars 6 to 8 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.

M & L for RCC 1:1.5:3 for septic tanks slabs complete all as specified and as directed.

M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and as directed.

M & L for Precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in manhole/drain slab cover all as specified and set in CM 1:4 complete all as specified.

M & for Rendering 15mm thick cement plaster in CM 1:4 on faces of brick work with or concrete WPC finished even and smooth without using extra cement all as specified ( WPC shall be measured and paid separately. )

Demolition and breaking up 150mm dia drain pipes (Salt glazed ware, AC or reinforced concrete ) and set in cement mortar all as spd and directed by Engr in Charge.

Demolition and breaking up 200 mm dia drain pipes (Salt glazed ware, AC or reinforced concrete ) and set in cement mortar all as spd and directed by Engr in Charge.

M & L for Concrete bed to drain pipes laid in trenches including packing under and haunching against the sides of pipes aftaer they are laid and tested in cement concrete 1:4:8 type D-2, using 40mm graded crushed stone aggregate for 150mm bore pipe, complete all as specified and as directed by Engr in charge.

M & L for Concrete bed to drain pipes laid in trenches including packing under and haunching against the sides of pipes aftaer they are laid and tested in cement concrete 1:4:8 type D-2, using 40mm graded crushed stone aggregate for 200mm bore pipe, complete all as specified and as directed by Engr in charge.

M & L for Salt -Glazed stoneware drain pipes 150 mm dia laind in trenches and jointed complete all as spd and directed

M&L for 200mm bore dia reinforced cement concrete pipes, class NP-2, laid and jointed complete with collars, complete all as specified and directed.

M & L for 200mm Bore / inner dia double wall, corrugated HDPE Pipe (SNB) (ISI Marked) with integral socket & necessary fitting jointing as directed & laid in trenches complete all as specified and directed

M & L for 150mm Bore / inner dia double wall, corrugated HDPE Pipe (SNB) (ISI Marked) with integral socket & necessary fitting jointing as directed & laid in trenches complete all as specified and directed

M & L for Cutting into existing manhole for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or ¼ section ) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching as specified and directed for 150mm dia of pipe complete all as specified.

M & L for Cutting into existing manhole for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or ¼ section ) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching as specified and directed for 225mm dia of pipe complete all as specified.

M & L 75mm thick PCC 1:3:6 Type B2 ( 40 mm graded aggregsate) as in subbase, Hardstanding and pavings etc all as specified.

M & L for Glazed ceramic colored tiles 600mmx300mmx 6 to 7mm thick/450mm x300 mm x 7mm,as in patches in vertical surfaces such as dado, skirting, wall etc set & jointed in neat cement slurry and pointed with coloured cement to match with tiles in over and including 10mm thick cement plaster in cement mortar 1:4. complete all as specified and directed.

S&F Non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11sqm but n exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or beddding layer of CM 1:6 including complete all as spd and directed.

M & L for 100mm dia Cast iron pipes with flanged ends, centrifu?gally cast, class A, in any length laid in trenches complete all as specified and directed.

M & L for 80mm dia Cast iron pipes with flanged ends, centrifu?gally cast, class A, in any length laid in trenches complete all as specified and directed.

M & L for upto 150mm bore Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110mm bore.complete all as specified and as directed.

S&F PVC (SWR) Branch Piece double equal or unequal of 110mm bore.complete all as specified and as directed.

S&F PVC (SWR) Branch Piece double equal or unequal of 75 mm bore.complete all as specified and as directed.

S&F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incl bolt and nuts securing ends of stays to wall or roof of 75mm bore.complete all as specified and as directed.

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

Provided M & L for cleaning of all types of blockage of Nahni traps/floor traps/bottle traps, blockages of WC's, rain water pipes and similar works complete all as specified and directed by Engr-in-Charge. Note :- 1. Labour shall be provided by the contractor on daily basis from 9:00 AM to 5:00 PM incl all Tools and Plants. Each labour shall intertain complaints everyday in working hours. 2. The supervisor of Contactor shall take all complaints from the Complaint Cell and do the all on same day. 3. Futhermore, the feedback shall be given by the contractor/supervisor to concened JE from all aspect.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion from cement concrete and making good disturbed ground complete all as specifed

Excavation for post holes in any type of soil (or in similar hole ) each n.exc 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm including dismantling PCC including disposal of surplus n.exc 50m all as specifed and directed by Engineer -in- Charge.

M&L for PCC 1:3:6 type C-2 (40mm graded aggts) in foundation filling and mass concrete all as specified and directed

M&L for posts and struts in fencing of angle, tee including cutting tops to shape as directed, drilling holes, notching for wire, Y angles wall for fencing, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed etc complete all as specifed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed.

Supply only Chain link fencing with or without line wires,any type and mesh size and any type of standards and dia of wire ( as directed by Engineer-in-charge) fixed with rails, staining bolts etc including provision of binding wire including dismantling existing unserviceable fencing all as specifed and directed.( rails, staining bolts will be measured in seperate Item)

S & F of Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and 5 to 10mm dia of shank complete all as specified and directed

M & L for Preparation new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge

Dismantling of barbed wire fencing of any description and any positions complete all as specified and as directed.

Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically provided reinforcement cut as required to facilitate demoltion.

Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below & above GL) unreinforced complete.

S&F Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as complete all as specified & directed.

Fixing only galvanised 2 strand, steel barbed wire of any description (obtained from dismantling) and straining and fixing to any type of standard rails straining bolts, including aluminium paint and securing or tying at crossing with and provn of galvanised MS wire complete all as specified and as directed.

Fixing,Restraining,resecuring incl making good staples etc of existing barbed wire fencing complete all as specified and directed.

M&L Providing and fixing concertina coil fencing with punched tape concertina coil 600mm dia 10 metre openable length , having 50 Nos rounds per 6 metre length, spring core wire (2.5 mm thick) of high tensile strength of 165 Kg/Sqmm with tape (0.52mm thick) and weight 43.478 gm/ metre and fixing the same with existing Y-shape dangle iron placed 2 mapartand with 6 horizontal R.B.T (Reinforced Barbed Tape) wire, stud tied with G.I staple and GI clips to retain horizontal, incld necessary bolts, all complete as per direction of Engineer-in-Charge.

M & L for Preparation of old decorated plastered or unplastered surface including cleaning by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying one coat of cement base paint on walls of external surfaces.

All as per itme no 193 above here-in-before but applying two coat of cement base paint on walls of external surfaces.

M&L for providing precast cement concrete (type B0 1:2:4 12.5mm graded aggregate) louvres and jallies, 25mm thick (measured solid), including all mouldings and form work including demlation of old louvres and jallies complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as spd & directed

M&L for 75 mm thick PCC1:4:8 type D-2 using 40mm graded as in sub base of floor, hard standing (40 mm graded stone aggregate), finishing even and smooth without using extra cement to received tiles including necessary form work etc complete all as specified and directed.

M&L in repair 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and laid over and including 25mm thick grid cushion complete all as specified and directed.

Note: (i) Cost of labour for providing new items including replacement /Demolition/ dismantling/ taking out/down of old unserviceable item shall be deemed under respective item. (ii) Cost of material shall be measured and paid separately under relevant items 1 to 139 as given below. (iii) Supervisor will collect the complaints from the complaint cell and complete the same and feed back given to the complaint cell on same day

ASHFAQ AHMED MANHAS (BID ID -3157070)

M/S KALSI ENGINEERS AND CONTRACTORS (BID ID -3156234)

M/S Shankardass Devidass (BID ID -3156185)

Nitika electricals and engineers works (BID ID -3156742)