Development of Infrastructure for Electrification of Un-electrified Households

New 11 KV Line Works - Supply

Supply of 6/2.59 + 1/2.59 mm (30 mm² Al. Area) - Weasel

Supply of 8.5 Mtr/180 kgs PCC Poles as per TS

Supply of Stone pad (300x300x75)

Supply of new Pre-fabricated hot dip galvanized steel items i.e. V cross arm, Pole Top Bracket, DP top channel, top clamp, belting angle, cross bracing, Channel & Clamps, strain plate, 50x8 mm stay clamp, guarding channels, Eye Bolts, back clamps, MS angle, MS flats pole extension channel with welded plate, anti climbing device clamp etc. complete as per TS & approved drawings.

Supply of hot dip galvanized MS Nuts, Bolts with Washers as per TS

Supply of 11 KV 5 KN Polymer Pin Insulators

Supply of 11 KV 45 KN polymer Disc insulator as per TS.

Supply of suitable 11KV 45KN disc hardware fittings T&C type 2U for ACSR Weasel conductor as per TS.

Supply of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.

Supply of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS

Supply of stay guy insulator (1 Nos.), as per TS

Supply of 7/3.15 mm dia GI stranded Stay wire as per TS for 11 kV stay set

Supply of 8 SWG GI wire for Protective guarding & earthing as per TS

Supply of 6 SWG GI Wire for Protective guarding as per TS

Supply of Barbed GI wire 12 SWG

Supply of PG Clamp suitable for ACSR Weasel/Rabbit conductor as per TS

Supply of 11 KV danger board

New Distribution Transformer 25 KVA 11/433 KV - Supply

Supply of 8.5 Mtr/180 kgs PCC Poles as per TS

Supply of new Pre-fabricated hot dip galvanized steel items i.e. V cross arm, Pole Top Bracket, top channel, top clamp, Channel & Clamps, strain plate, 50x8 mm stay clamp,back clamps, MS transformer base channel, Transformer angles & Channels, AB switch channels & angles, DO fuse channls & angles, anti climbing device clamp etc. complete as per TS & approved drawings.

Supply of hot dip galvanized MS Nuts, Bolts with Washers as per TS

Supply of 11 KV 5 KN Polymer Pin Insulators

Supply of 11 KV 45 KN polymer Disc insulator as per TS.

Supply of suitable 11KV 45KN disc hardware fittings T&C type 2U for ACSR Weasel conductor as per TS.

Supply of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS

Supply of stay guy insulator (1 Nos.), as per TS

Supply of 7/3.15 mm dia GI stranded Stay wire as per TS for 11 kV stay set

Supply of 8 SWG GI wire for earthing as per TS

Supply of Barbed GI wire 12 SWG

Supply of PG Clamp suitable for ACSR Weasel conductor as per TS

Supply of 11 KV danger board

Supply of 11 KV, 3-Pole, 3-Ph, 400A, A B Switch as per TS

Supply of 11 KV, 3-Ph, 400A, DO Fuse as per TS

Supply of 3-Phase, 11/0.4 kV, 25 KVA, Self Protected, Aluminium winding & CRGO core Distribution Transformer as per TS BIS Level - 2

Supply of LT Distribution box with suitable rating MCCB for incomer & Kit-Kat fuse for two no outgoing feeder suitable for 25 kVA, Dist1ibution Transformer for pole mounting as per TS

Supply of 9 kV, 5 KA porcelain housing Lightning Arrestor with Disconnector for DT as per TS. (3 nos=1 set)

Supply of Earthing complete for T/F neutral, L.A. & Body (3 nos. 40mm dia 3 mtr. Long GI Pipe earthing) with charcol, salt etc as per approved drawing and TS.

Supply of Earthing complete for T/F neutral, L.A. & Body (3 nos. Chemical pipe earthing including electrode, chemical, with 2000mm long, 50 mm diameter GI pipe, in hard rock locations only. ) as per approved drawing and TS.

Supply of 1-Core 35 mm2, Al. LT XLPE Cable as per TS

New Three Phase LT Line AB Cable Works - Supply

Supply of LT Aerial bunched XLPE cable 3X50 sqmm (Ph) + 1x35 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)

Supply of 8.5 Mtr/180 kgs PCC Poles as per TS

Supply of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.

Supply of hot dip galvanized MS Nuts, Bolts with Washers as per TS

Supply of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.

Supply of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS

Supply of stay guy insulator (1 Nos.), as per TS

Supply of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set

Supply of 8 SWG GI wire for earthing as per TS

Supply of Three phase SMC Distribution box with clamps

Supply of 4Cx35 SQMM Stranded XLPE Unarmoured Cable, (Al Conductor ) for charging Three Phase DB

Supply of Suspension clamp for LT Aerial Bunched Cable as per TS

Supply of Tension /dead end clamps for LT Aerial Bunched Cable as per TS

Supply of 35 Sqmm PG Clamps as per TS

Supply of LT Insulation piercing connector 50 -50 sqmm size for phase connection as per TS & approve drawing

Supply of LT Insulation piercing connector 50 -35 sqmm size for phase connection as per TS & approve drawing

Supply of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS

Pre-Insulated Compression connectors size 16 sqmm suitable for AB XLPE cable

Pre-Insulated Compression connectors size 50 sqmm suitable for AB XLPE cable

New Single Phase LT Line AB Cable Works - Supply

Supply of LT Aerial bunched XLPE cable 1X16 sqmm (Ph) + 1X25 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting)

Supply of 8.5 Mtr/180 kgs PCC Poles as per TS

Supply of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. complete as per TS & approved drawings.

Supply of hot dip galvanized MS Nuts, Bolts with Washers as per TS

Supply of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.

Supply of Stay Set (Galvanized) with anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod complete stay set as per TS

Supply of stay guy insulator (1 Nos.), as per TS

Supply of 7/3.15 mm dia GI stranded Stay wire as per TS for LT stay set

Supply of 8 SWG GI wire for earthing as per TS

Supply of Single phase SMC Distribution box with clamps

Supply of 2Cx25 SQMM Stranded XLPE Unarmoured Cable, (Al Conductor ) for charging Single Phase DB

Supply of Suspension clamp for LT Aerial Bunched Cable as per TS

Supply of Tension /dead end clamps for LT Aerial Bunched Cable as per TS

Supply of 25 Sqmm PG Clamps as per TS

Supply of LT Insulation piercing connector 16-16 sqmm size suitable for street light connection as per TS

Pre-Insulated Compression connectors size 16 sqmm suitable for AB XLPE cable

Service Connection

Supply of 2Cx6 SQMM Armoured Service Cable

Supply of 10 SWG GI Wire

Supply of 4Cx16 SQMM Armoured Service Cable

Supply of 8 SWG GI Wire

New 11 KV Line Works - Erection

Survey, route alignment & pole spotting, preparation of survey report and uploading in the web portal after approval of Competent Authority as per TS.

Erection of ACSR Weasel Conductor (30 mm² Al. Area) including jointing sleeves, helical formed fittings, jumpering and by providing & erecting PG Clamps etc as required as per approved drawings, scope of work and TS.

Excavation of 8.5 Mtr/180 kgs PCC Pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and TS.

Erection of 8.5 Mtr/180 kgs PCC Pole for 11 KV overhead line by installing danger plate, anti-climbing devices (barbed wire), pole numbering including cement concrete foundation using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and TS.

Erection of new Pre-fabricated hot dip galvanized steel items i.e. V cross arm, Pole Top Bracket, DP top channel, top clamp, cross bracing, Channel & Clamps, strain plate, 50x8 mm stay clamp, guarding channels, Eye Bolts, back clamp, MS angle, MS flats pole extension channel with welded plate, anti climbing device clamp etc. and hot dip galvanized MS Nuts, Bolts with Washers complete as per TS & approved drawings.

Erection of 11 KV 5 KN Polymer Pin Insulators

Erection of 11 KV 45 KN polymer Disc insulator with suitable disc hardware fittings T&C type 2U for ACSR Weasel conductor as per TS.

Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.

Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator and 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.

Erection of 8 SWG GI wire for Protective guarding & earthing as per TS

Erection of 6 SWG GI Wire for Protective guarding as per TS

Erection of Barbed GI wire 12 SWG

Erection of 11 KV danger board

New Distribution transformer 25 KVA 11/433 KV - Erection

Excavation of 8.5 Mtr/180 kgs PCC Pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and TS.

Erection of 8.5 Mtr/180 kgs PCC Pole for 11 KV overhead line by installing danger plate, anti-climbing devices (barbed wire), pole numbering including cement concrete foundation using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and TS.

Erection of new Pre-fabricated hot dip galvanized steel items i.e. V cross arm, Pole Top Bracket, top channel, top clamp, Channel & Clamps, strain plate, 50x8 mm stay clamp,back clamp, MS transformer base channel, Transformer angles & Channels, AB switch channels & angles, HG fuse channls & angles, anti climbing device clamp etc. and hot dip galvanized MS Nuts, Bolts with Washers complete as per TS & approved drawings.

Erection of 11 KV 5 KN Polymer Pin Insulators

Erection of 11 KV 45 KN polymer Disc insulator with suitable disc hardware fittings T&C type 2U for ACSR Weasel conductor as per TS.

Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator and 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.

Erection of 8 SWG GI wire for earthing as per TS

Erection of Barbed GI wire 12 SWG

Erection of 11 KV danger board as per TS

Erection of of 11 KV, 3-Pole, 3-Ph, 400A, A B Switch as per TS

Erection of 11 KV, 3-Ph, 400A, DO Fuse as per TS

Erection of 3-Phase, 11/0.4 kV, 25 KVA, Self Protected, Aluminium winding & CRGO core Distribution Transformer as per TS BIS Level - 2 with jumpering, PG clamps complete as per approved drawsing and TS.

Erection of LT Distribution box with suitable rating MCCB for incomer & Kit-Kat fuse for two no outgoing feeder suitable for 1-Phase 11/0.4 kV, 25 kVA, Distribution Transformer for pole mounting as per TS

Erection of 9 kV, 5 KA porcelain housing Lightning Arrestor with Disconnector for DT as per TS. (3 nos=1 set)

Erection of Earthing complete for T/F neutral, L.A. & Body (3 nos. 40mm dia 3 mtr. Long GI Pipe earthing) with charcol, salt etc as per approved drawing and TS.

Erection of Earthing complete for T/F neutral, L.A. & Body (3 nos. Chemical pipe earthing including electrode, chemical, with 2000mm long, 50 mm diameter GI pipe, in hard rock locations only. ) as per approved drawing and TS.

Erection of 1-Core 35 mm2, Al. LT XLPE Cable as per TS

New Three Phase LT Line AB Cable Works - Erection

Survey, route alignment & pole spotting, preparation of survey report and uploading in the web portal after approval of Competent Authority as per TS.

Erection of LT Aerial bunched XLPE cable 3X50 sqmm (Ph) + 1x35 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting) with Fixing tension clamps for dead end, suspension clamps, clamps for neutral, piercing connectors type-I & type-II, Pre- insulated compression connectors, 16 mm dia MS nuts & bolts, pole clamps, stainless steel strap, end cap etc. as required as per technical specification, approved drawings and scope of work

Excavation of 8.5 Mtr/180 kgs PCC Pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and TS.

Erection of 8.5 Mtr/180 kgs PCC Pole for LT overhead line by installing danger plate, anti-climbing devices (barbed wire), pole numbering including cement concrete foundation using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and TS.

Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. and hot dip galvanized MS Nuts, Bolts with Washers complete as per TS & approved drawings.

Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.

Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator and 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.

Erection of 8 SWG GI wire for earthing as per TS

Erection of Three phase SMC Distribution box with clamps

Erection of 4Cx35 SQMM Stranded XLPE Unarmoured Cable, (Al Conductor ) for charging Three Phase DB

New Single Phase LT Line AB Cable Works - Erection

Survey, route alignment & pole spotting, preparation of survey report and uploading in the web portal after approval of Competent Authority as per TS.

Erection of LT Aerial bunched XLPE cable 1X16 sqmm (Ph) + 1X25 sqmm (bare messenger cum neutral) + 1x16 sqmm (insulated Street lighting) with Fixing tension clamps for dead end, suspension clamps, clamps for neutral, piercing connectors type-I & type-II, Pre- insulated compression connectors, 16 mm dia MS nuts & bolts, pole clamps, stainless steel strap, end cap etc. as required as per technical specification, approved drawings and scope of work.

Excavation of 8.5 Mtr/180 kgs PCC Pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and TS.

Erection of 8.5 Mtr/180 kgs PCC Pole for LT overhead line by installing danger plate, anti-climbing devices (barbed wire), pole numbering including cement concrete foundation using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and TS.

Erection of new Pre-fabricated hot dip galvanized steel items i.e. LT Pole Clamp, Eye Hook, Stay clamp, etc. and hot dip galvanized MS Nuts, Bolts with Washers complete as per TS & approved drawings.

Erection of 20 mm dia 2500 mm long GI Earthing Rod together with fixing arrangement (excluding GI wire required for earthing) as per approved drawing.

Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator and 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per approved drawings, scope of works and TS.

Erection of 8 SWG GI wire for earthing as per TS

Erection of Single phase SMC Distribution box with clamps

Erection of 2Cx25 SQMM Stranded XLPE Unarmoured Cable, (Al Conductor ) for charging Single Phase DB

Service Connection Erection

Erection of 2Cx6 SQMM Armoured Service Cable

Erection of 10 SWG GI Wire

Erection of 4Cx16 SQMM Armoured Service Cable

Erection of 8 SWG GI Wire

VISHWA SAMUDRA ENGINEERING PRIVATE LIMITED