REPAIR REPLACEMENT OF PLUMBING SANITARY FITTINGS FLOOR AND WALL TILES FALSE CEILING PLINTH PROTECTION ALUMINIUM JOINERIES PERIODICAL SERVICES AND OTHER MISC REPAIR WORKS AT RTC AND DIRECTORS ENCLAVE AT ZONE A ZONE B CASDIC UNDER GE I R D EAST B

Amount

Material and labour Prelaminated particle board 18/19mm thick ,exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed withnails to timber frame work as in shutters for kitchen shelves/cupboards including teak wood lipping 6mm thick fixed with nails complete fixed in repairs .

Material and labour Prelaminated particle board 18/19mm thick ,exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed withnails to timber frame work as in pelmet boxes or in narrow width nexc 15cm each including teak wood lipping 6mm thick fixed with nailscomplete fixed in repairs .

Supply and fix in repairs of Drapery Rod 20 mm dia, Decorative type complete all as specified and as directed.

Supply and fix in repairs of End Stopper, Decorative type and fixing Brackets for the Drapery Rod 20 mm dia. (One Set comprises of 2 No. of Decorative type End Stopper 2 No. of fixing Brackets) and fixed-in-repairs, complete all as specified and as directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed tinned tacks or aluminium wire staples complete all as specified and as directed by the Engineer in charge.

S&F in repair ball catcher with 8 mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified

S & F in repairs stainless steel self closing auto hinges for cabinet shutter complete all as directed

S & F in repairs stainless steel telescopic channel ball bearing drawer channel 500 mm with loading capacity 45Kgs complete all as directed

S & F in repairs aluminium anodised barrel tower bolt of extruded section of length 100 mm complete

S&F in repairs 40mm width of flap (when open) continuous (piano) hinges, mild steel, bright finish or electro galvanised all as specified and directed

Supply and fix in repairs mortice lock brass vertical type 4 levers 100 mm, all as specified and directed of make Godrej or equivalent

S & F 100 mm long butt hinges medium weight cold rolled mild steel complete

Supply and fix in repairs 150 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring,shoe all as specified and as directed.

Supply and fixing in repairs brass Mortice latch with two levers( vertical type) heavy duty of make Godrej or equivalent

Material and labour for preparation of old white wash surfaces and applying one coat of white wash on wall complete all as specified and as directed by Engineer-in-Charge.

All as per Item Srl No 15 above, but one coat of white wash on ceiling.

Material and labour Washing, rubbing down and stopping of of old distempered wall surfaces and applying one coat of distemper oil emulsion on wall surfaces complete all as specified and as directed by Engineer-in-Charge.

All as per Item Srl No 17 above, but two coats of oil bound distemper.

Material and labour Washing, rubbing down and stopping of distempered and painted surfaces of old distempered surfaces and applying one coat of distemper oil emulsion on ceiling surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and labour Washing, rubbing down and stopping of distempered and painted surfaces of old distempered surfaces and applying two coat of distemper oil emulsion on ceiling surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old wall surfaces and applying one coat of cement paint on wall surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for preparation of surfaces of any description of old painted surfaces and applying one coat of plastic emulsion paint complete all as specified and as directed.

Complete removal of existing treatment of wall surfaces and finishing the surface with two or more coats of Birla/JK wall care putty to receive the good & smooth surfaces and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and as directed.

Material and labour for applying two coats of 100% premium acrylic emulsion Paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004.Alkali&fungal resistance,dirt resistance exterior paint of required shade (company Depot tented) with silicon additives @ 1.43litre/10sqm weather proof emulsion paint over and including priming coat of exterior primer complete including removal of existing treatment and,filling minor cracks with necessary crack filler (DrFIXIT or Equivalent As approved)as per the manufacurer intructions complete all as specified and as directed by Engineer in charge.

Material and labour for applying one coat of 100% premium acrylic emulsion Painnt having VOC less than 50gm/litre and UV resistance as per IS 15489-2004.Alkalie&fungal resistance,dirt resistance exterior paint of required shade (company Depot tented) with silicon additives @ 1.43litre/10sqm weather proof emulsion paint over and including priming coat of exterior primer complete including preparation ,filling minor cracks with necessary crack filler (DrFIXIT or Equivalent As approved)as per the manufacurer instructions complete all as specified and as directed by Engineer in charge.

Material and labour for preparation of old painted wood or wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed by Engineer-in-Charge.

All as per Item Srl No 26 above, but two coats of synthetic enamel paint on wooden surfaces.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed by Engineer-in-Charge.

All as per Item Srl No 28 above, but two coats of synthetic enamel paint on steel surfaces.

Material and labour for grinding of old terrazzo/kota tile floor, skirting, marble / granite kitchen cooking plat form using machine with acrborandum of 220 to 350 grit and applying oxalic acid powder, machine fitted with hessain bobs and finally applied with wax polish complete all as specified.

Supply and fixing powder coated aluminium ( minimum thickness of powder coating 50 micron) section as in door shutters,aluminium section weighing 0.55 kg/ M including joining cleats , glazing clips, rubber neoprene packing, handles - 2 Nos in each door, hinges, snap beading, screws complete fixed in repairs all as specified & directed

Supply and fixing powder coated aluminium ( minimum thickness of powder coating 50 micron) section as in windows and ventilator shutters, side hung type without sash bars,aluminium section weighing 0.55 kg/ M including joining cleats , glazing clips, rubber packing , hinges type B-21 100 mm long 2 nos, suitable handle 1 No, snap beading, screws complete fixed in repairs all as specified & directed

Supply and fixing powder coated aluminium ( minimum thickness of powder coating 50 micron) frame for doors , windows, ventilators,with one or more rebates including joining cleats for fixing, complete all as specified and directed by EIC including taking down old joinery etc.complete all as specified & directed

S&F in repairs figured glass pane pin headed including removing loose or decayed putty sheet figured glass, pin head type and glazing with oil putty/rubber beading in square not exceeding 0.5 Sqm in each pane of 4 mm thick etc

Supply and fixed in repair Aluminium (Die cast) body door closer, hydraulically regulated designation No 3, univeral type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete.

Supply and fixing 5.5 mm thick sheet glass ordinary quality and glazing with oil putty/ glazing pins / spring clips/rubber beads exc 0.50 Sqm each pane complete all as specified and as directed.

Supply and fixed in repair solar control film 50 micron thick reflective type sticked to glass panes as per instructions of manufacturers complete

Supply and fix in repairs venetian blinds vertical type 100 mm width with approved fablric and powder coated aluminium fittings such as top rails, metal weight nylon button loops etc to ,match with the top rail metal base complete all as specified and dircted

Resecuring or easing & adjusting of shutters, without taking down but exc 1 sqm but not exc 2 sqm each

Resecuring or easing & adjusting of shutters, without taking down but exc exc 2 sqm each

Supply and fix in repairs 15 mm CP cast copper alloy bib taps with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified

Supply and fixed in repair, Bib tap long body 15 mm dia without wall flange, foam flow, chromium plated, fancy type, screwed down, screwed for iron pipe complete all as directed

Supply and fixing CP wall mixer 3-in-1 system including three joints to steel pipes, plugging and screwing to walls fixed in repairs complete all as specified and as directed. Make Jaguar CAT No. 7281 or Equivalent.

Supply and fixing CP wall mixer 2-in-1 system including three joints to steel pipes, plugging and screwing to walls fixed in repairs complete all as specified and as directed. Make Jaguar or Equivalent.

Supply and fix in repairs brass chromium plated bottle traps for WHB/urinal with inlet and outlet screwed for pipe including necessary packing union and cap 40 mm bore/suitable of trap.

Supply and fix in repairs 15 mm pillar tap,fancy type , cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe all as specified

Supply and fixed in repair Sink cock 15mm dia swan neck of CP Brass type with casted spout without foam flow complete all as specified

S&F in repairs 15 mm fancy type chromium plated Stop valves, angle cock cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete

Supply and fix in repairs 15 mm dia of bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified .

M&L waste fittings,32mm brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repairs

S&F in repairs 15 mm fancy type chromium plated with long shank Stop valves, angle cock cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle( concealed type ) screwed both ends for iron pipe or for unions complete

Supplying and fix in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm, all as specified.

All as per item No 54 here-in-before, but 600mm lengths, all as specified and as directed.

Supply and fix in repairs flush pipe of polyethylene of low or high density or PVC 32mm dia, for low level cistern including jointing to squatt pattern closet and making good the floorcomplete all as specified

Supply and fix in repairs stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen with plugs, waste pipe and washer’s including cast iron cantilever brackets, connecting union etc over all size 915 mm x 460 mm with bowl size 410 x 330 x 160 mm.

Supply and fixed in repair PVC flushing cistern 10 ltr capacity, low level, white, with inlet, ball valve, float and handle etc complete . Make : Prayag/Commander

S & F Gun metal globe or gate valve of 20 mm bore with Iron wheel head, screwed both ends for iron pipe and fixed in repairs

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps but including brackets, cutting for and pinning brackets or errecting stands /rockbolts to fixing all as specified .

Supply and fix in repairs water closet seat cover white or black colour closed pattern with flat bottom complete all as specified.

Supply and fix in repairs grating of 125 mm dia of stainless steel for floor trap etc,complete all as specified.

Supply and fix in repairs grating of 125 mm dia but with holes of stainless steel for floor trap etc,complete all as specified.

Material and labour for 15 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing steel tubing and connections complete all as specified and as directed.

Material and labour for 20 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing steel tubing and connections complete

Supplying & laying in repairs of 16mm dia CPVC pipes SDR 11 fittings on walls/ ceiling or laying in floors complete including all fittings all as specified and as directed

All the same as per item No 66 here in before but 20mm dia CPVC pipes

Supply and fix in repairs brass CP shower rose 125 mm with or without / swivel joints,as specified and as directed.

Supply and fixed in reapirs EWC vitreous china pan with 'S' or P trap white , including connection to drain or out going pipe and flushing pipe, antisyphonage pipe etc complete all as specified and directed , Make Jaquar or Jhonson/Cera as approved

S & F fancy type chromium plated 2 way bib tap 15mm dia with CP flange as fixed in repair all as specified and as directed. Make: Jagur or equivalent

S&F in repairs Health faucet,(ABS Body)mid steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified.

Cutting screwing existing steel tubing of 15mm dia for addition/alterations pipes etc complete all asspecified and as directed

cutting screwing existing steel tubing of 20 mm dia for addition/alterations pipes etc complete all asspecified and as directed

Taking up or down 15mm dia GI old tubing and conncetions including cleaning and re-fixing in new or old position to walls/chases/ceilings or laying in floors etc complete all as specified and as directed.

Taking up or down 20 mm dia GI old tubing and conncetions including cleaning and re-fixing in new or old position to walls/chases/ceilings or laying in floors etc complete all as specified and as directed.

Supply and fix in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified and directed

Supply and fix in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed

Supply and fix in repairs kitchen stand made out of stainless steel of size length 910mm x width 225mm x height 790mm ,make Prayag / Maruti or Equivalent complete all as specified and as directed

Supply and fix in repairs vitreous china water closet (Orissa pattern) of size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe)including connection to trap and to flushing pipe, anti syphonage pipe and provision of concrete bedding etc complete all as specified and directed

S&F in repairs CP brassTubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs Cabinet mirror, moulding theremoset litron formaldehyde of plientil formaldehyde with chromium plated frame openable type and mirror colour white Make : Prayg / Commander

Supply and fixed in repairs corner shelves glass fitted with CP brackets and screws complete all as specified and directed

Supply and fix in repairs Nipple PTMT suitable for 20 mm dia bore pipe in HDPE water tank ( Minimum weight 15mm-38gms/20mm-45 gms/25mm-65gms) complete as directed

Supply and fix in repairs Extension Nipple PTMT suitable for 15 mm dia bore pipe in HDPE water tank ( Minimum weight 15mm-18gms) complete as directed

Dismantling of floor or wall tiling including cement mortar bedding, and disposing of debris outside MD land all as specified and as directed.

Material and labour for glazed ceramic coloured tiles 300 x 200 x 7 mm /450x300x7mm on vertical surfaces such as skirting / dados including rendering 10 mm thick in CM 1:3 as in backing coat for fixing tiles complete all as specified and directed.

M&L for Non-skid ceramic tiles coloured 7 to 8mm thick in floors area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm ,in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L granite 20 mm thick of any type work ( table rubbed and polished) as in cooking platforms and like ,in cement mortar (1:4) including pointing in white cement 1:2, using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing laid on 15 mm thick screed bed in CM 1:4 set and jointed complete all as specified and directed..

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed.

Material and labour for vitrified ceramic coloured tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick CM 1:6 screed bed complete all as specified and directed

All same as per item No 91 above but as in skirting over and including 10 mm thick rendering on brick work or concrete surface as in backing coat of cement mortar 1:4 complete all as specified and directed

Material and labour for Chequered cement concrete tiles of size 25cmx25cmx25mm thick set, jointed and pointed in neat cement slurry with mixture of gray and white cement including screed bed 15 mm thick in CM1:6 complete all as specified and as directed

Demolition of PCC (Unreinforced) in ground floors and pavings nexc 15 cm thickness including removal of debries upto a distance of 500 meter from the building all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick cement concrete type C2, 1:3:6 ,using 40mm graded stone aggregate as in Path, hard standing, Plinth protection etc and finishing cement concrete surface even and smooth without using extra cement complete all as specified.

Material and Labour for applying silicon sealant in the gaps of windows in repairs all as specified and as directed by Engineer in charge.

Material and Labour in repairs for fixing rubber beading for Aluminium windows all as specified and as directed by Engineer in charge.

Supply and fix in repairs cup board/ drawer magnet complete all as specified

Supply and fix in repairs PVC waste pipe of 32 mm dia all as specified

Material and labour in repairs external teak wood lipping 6mm thick, fixed with particle board all as specified and as directed by Engineer in charge.

Cleaning accessable or non accessable roof including cleaning the RCC roof with wire brushes , removal of tree root,caked mud etc sweeping with brooming and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and removal of debbries from the site premises as directed by EIC all as specified and directed

M & L double action floor spring hydraulically regulated made up of minimum1.25mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs complete all as specified and as directed

M & L fixed in repairs Sensors only for Automatic touchless ceramic Urinal sensor/ sensor flusher of approved make complete all as specified and as directed by EIC

GKR and CO

K. VENKATESH NAIDU

Auromirra Enterprises

M S K CONSTRUCTION

S R CONSTRUCTIONS

MAYDINI CONSTRUCTION CO

SHRI NARAYANADRI ENGINEERS & BUILDERS