Repair Renovation of PWD Rest House at Machhedi

Amount

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead : a) 1:3:6 or richer mix.

Providing and laying cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:a) 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) with 20% boulders) (including all leads and lifts carriages of material by MT/HL)

Providing and laying vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. a) Size of tile 600x600mm (including all leads and lifts carriages of material by MT/HL)

Dismantling the work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.a) For thickness of tiles 10mm to 25mm bathroom.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete (including all leads and lifts carriages of material by MT/HL)

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground, including all leads and lift. a) ith cement mortar 1:4 (1 cement:4 fine sand) (including all leads and lifts carriages of material by MT/HL)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.a) 2mm thick.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Finishing walls with Acrylic smooth exterior paint of required shade:13.119.1 old work (two or more coats applied @ 1.67 liters / 10 sqm. on existing cement paint surface).

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead.a) of Area of 3 sqm. and below.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screw, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:Butt hinges and necessary screws shall be paid separately).a) Second class deodar wood.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4mm in both directions with wire of dia. 0.63mm for doors, windows, and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screw as per direction of Engineer-in-charge.a) Second class deodar wood.

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. a) Two or more coat on new work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. a) One or more coat on old work

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. B) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115 mm size with 50% of cement mortar 1:5 (1 cement:5 coarse sand) admized with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement:5 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/sqm of cement admixed jointless cement mortar of mix. 1:4 (1 cement:4 coarse sand) admixed with water proofing dompoune donro4mint 5o IS:2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-charge :22.7.1 with average thickness of 120mm and minimum thickness at khurra as 65 mm. sqm (including all leads and lifts carriages of material by MT/HL)

Renewing glass panes, with putty & nails wherever necessary: a) Float glass panes of thickness 4mm.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. a) 15mm nominal bore.

Providing and placing on terrace (at all floors levels) polyethylene water storage tank ISI: 12701 marked indicating the BIS License nos.with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and base support for tank (Sintex, Electroplast, Star, Lotus, or equivalent having valid ISI license).

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work).a) 20mm dia nominal bore.

Supplying and fixing following modular switch socket on the existing modular plate and switch box including connections but excluding modular plate etc.

a) 5/6 amp. Switch.

b) 3 pin 5/6 amp. Socket outlet

c) 15/16 amp. Switch.

d) 6 pin 15/16 amp. Socket outlet

Rewiring for light print / fan point / exhaust fan point / call bell point with 1.5 sqm FR PVC insulated copper conductor single core cable and 1.5 sqm. FR PVC insulated copper conduct or single core cable as each wire in existing surface recessed steel conduit including dismantling as required. a) Group-A.

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Sand from Billawar crusher for an average lead of 35.00 Km. by M.T. b) Stone aggregate (Crusher bajree) below 20mm nominal size from Billawar crusher for an average lead of 35.00 Km. by M.T.

RAM PARSHAD KHAJURIA

Suksham Raina

M/S RASANT SINGH

TILAK RAJ

NARINDER KUMAR GOVT CONTRACTOR

TILAK RAJ GOVT CONTRACTOR

KARAN SINGH