SPECIAL REPAIR TO BLDG NO. T-35 AT DOGRA FORT AND SPL REPAIR TO OLD UNSERVICEABLE LT PANELS, LT CABLES AND CONNECTED ITEMS AT DIFFERENT UNITS AT KARU AREA UNDER GE 860 EWS

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed by Engr-in-Charge.

M&L Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each colour tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15mm thick screed bedding in CM 1:4 for laying floor finishes receiving floor tiles complete all as specified and directed by Engr-in-Charge.

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.

M&L for veneered decorative plywood 4mm thick (3 Nos of ply) grade 1 (with BWR resin) with decorative face veneers one face fixed with nails to timber frame work complete as in wall paneling complete all as specified and directed by Engr-in-Charge.

M&L for veneered decorative plywood 4mm thick (3 Nos of ply) grade 1 (with BWR resin) with decorative face veneers one face fixed with nails to timber frame work complete as in ceiling paneling complete all as specified and directed by Engr-in-Charge.

M&L First class soft wood sectional area not exceeding 6 sqcm Moulding as in cornices, picture rails and the like , secured with nails or brads complete all as specified and directed by Engr-in-Charge.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. in framed work under 40 sq. cm in section complete all as specified and directed.

M&L second class hard wood timber scantling plain fillets, square, rectangular or triangular in section clear swan, sectional area exc 6 sqcm & not exc 13 sqcm, secured with nails or brads complete all as specified and as directed.

Taking down chowkats or frame exc 1.5 Sqm and n exc 4 sqm with shutters without taking of shutter from the framecomplete all as specified and directed by Engr-in-Charge.

S&F Plain solid straight chowkats or frame rounded or chamfered put together with glue pined at joints with 2nd class hard wood complete all as specified and directed by Engr-in-Charge.

S&F for 35mm thick 2nd class hardwood Plain, framed, panelled door shutters(any number of panels), with panels of timber flat on both sides(feather edged), veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S&F 150mm extruded aluminium handle complete all as specified and directed by Engr-in-Charge.

S&F MS butt hinges medium weight cold rolled mild steel size of hinges 100 mm complete all as specified and directed by Engr-in-Charge.

S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy barrel tower bolt of extruded type 150 mm long complete all as specified and directed by Engr-in-Charge.

S&F 140 mm over all length of cover plate floor door stopper of aluminium alloy body and tounge, anodized with hard drawn steel spring fixed in floor complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed by Engr-in-Charge.

M&L framed work FE-410-W (Gde-250 quality A) as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks.

S&F 1mm Mild Steel ,Plain sheet in steel Gate cut to size, holes, punched including round heded screws,clout nails or rivits and fixed to steel framing with plain 40mm lap joint with rivited and welded seams . including bending and turning up mitred angles ,ets as required dia galvanised complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and treating with two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

M&L preparation of untreated new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

Demolition of stone/PCC block/boulder masonary built in cement mortar including all quions , arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed by Engr-in-Charge.

M&L for Pre-cast cement concrete block masonry type C-1 1:3:6 (using 20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete in CM 1:4 and finishing the surfaces even and smooth (without using extra cement) as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete in CM 1:6 and finishing the surfaces even and smooth (without using extra cement)-Internal Plaster as specified and directed.

M&L for preparing newly plastered surface and applying two coats of white wash on walls complete all as specified and directed.

M&L for preparing old surfaces including priming plastered and other surfaces with alkali resistant priming paint and applying two coat of cement base paint complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and paving etc in exec 15 cm thick below or above GL complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in plinth protection/ path and fininshed even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering or wall etc complete all as specified and directed by Engr-in-Charge.

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge.

Taking down carefully damaged copper/aluminum point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, cassing & capping, pendants, sockets, light fitting etc and making good disturbed surfaces of wall/roof complete all as specified and directed.

Taking down of MCB DB/TPN 8way/12way including mcb sp and spn and making good of wall complete all as specified and directed.

M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board /Gang Box of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.

One light point controlled by one 5 Amps one way switch

One 3 pin socket outlet 5 Amps on independent board

One 3 pin socket outlet 5 Amps on same board

M&L point wiring for power point with 2.5 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through PVC casing capping of suitable size(as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board /Gang Box of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.

S&F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed by Engr-in-Charge.

S&F Socket outlet 2 in 1, 3 pin, 6A (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage.

S&F switch socket combination 3 pin, 5 Amps, 2 in 1 flush type (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage.

S&F switch socket combination 2 in 1, 3 pin, 5/15 Amps, flush type (multipurpose). Complete all as specified and directed by Engr-in-Charge.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.

Supply and fixing inverter LED Bulb 9 W ,220 V, white color all as specified and as directed.

S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 22W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed.

S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.

S&F MCB DB sheet enclosure, Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 12 way complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed.

Supply and fixing MCB SPN 240V, 10KA 'C' curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

M&L in replacement earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.

M&L for GI Pipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer and taking out old one including connection with street light complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed.

Supply and fix exhaust fan, Plastic body AC single Phase 230V of size 250mm sweep with, blades, and frame and louvers all as directed and specified by Engr- in -charge.

Supply and fixing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, 4 core, cross-sectional area 25 sq. mm complete all as specified and directed by Engr-in-Charge.

Excavation in trenches in hard / dense soil not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide and getting out including trimming of sides, for laying of cables & foundation of poles, stay assembly, complete all as specified and directed by Engr-in-Charge.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick, complete all as specified and directed by Engr-in-Charge.

Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point, complete all as specified and directed by Engr-in-Charge.

Taking out old unserviceable/serviceable un-reinforced concrete PCC cable covers from excavated trench all as directed by the Engineer-in-Charge. Note:- Serviceable un-reinforced concrete PCC cable cover kept in safe custody for reuse at site and unserviceable un-reinforced concrete PCC cable cover through in low lying area.

Laying only old reinforced PCC cable cover of any size as retrieved from serial item No. 56.00 here in before complete all as directed by Engineer-in-Charge.

M&L for factory made un-reinforced pre cast concrete cable protection cover LV class type - I with size 250mm x 150mm x 40mm laid across the cable (i.e. width of cover along the length of cable) for UG cable protection on the top of the sand cushioning, complete all as specified and directed by Engr-in-Charge.

M&L for sand cushioning with layer of sand 8cm thick before laying of cable and 10cm after laying of cable in trenches complete all as directed and sand cover to UG cable, complete all as specified and directed by Engr-in-Charge. Note:- Only punned thickness shall be measured and paid.

S&F galvanized iron pipe of 50 mm nominal dia light grade fixed to poles with clamps nuts, bolts and washers or laid under road crossing or fixed to wall including painting with two coats of aluminium paint over a coat of red oxide paint, complete all as specified and directed. Note : The cost of MS clamp, nut, bolt, washer and GI fittings etc shall be inclusive in the item rate.

Taking out old LT under ground cable from trenches / floor / road / wall / pipe / pole of any size and description incl joint, complete all as specified and directed by Engr-in-Charge.

Supply, laying, testing and commissioning of LT UG cable XLPE insulated PVC sheathed galvanized steel strip armoured electric power cable with stranded aluminium conductor 1100 volts grade 185 sq mm 3.5 core confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, complete all as specified and directed by Engr-in-Charge Note : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it. 2. Excavation, earth work, sand cushioning and brick protection will be measured and paid separately under respective items.

Description all as per Srl item No. 62.00 here in before but for cable size of 95 sqmm 3.5 core.

Description all as per Srl item No. 62.00 here in before but for cable size of 50 sqmm 3.5 core.

Description all as per Srl item No. 62.00 here in before but for cable size of 35 sqmm 3.5 core.

Description all as per Srl item No. 62.00 here in before but for cable size of 16 sqmm 2 core.

Taking out old UNSV LT panel board / Junction box of any size complete all as specified and directed by Engr-in-Charge.

Supply, installation, testing and commissioning, in replacement, of Feeder Pillar box , cubical type, factory made, outdoor type, dust and vermin proof, fabricated out of mild steel sheet not less than 3.15 mm thick, and mild steel angle iron frame complete with openable shutters in front and rear having proper locking arrangement including 04 Nos legs made out of angle iron of suitable size and height of each leg shall be grouted in PCC. Feeder Pillar box shall be spray painted internally and externally with two coats of synthetic enamel paint over a priming coat of red oxide primer and connecting all incomming and outgoing cables with suitable size of Aluminium lugs complete all as specified and as directed by Engineer-in-Charge and comprising of following accessories/fittings :- (a) MCCB 4 pole, 400 Amps, 415 Volt, AC ,50 KA = 01 No (I/C) (b) MCCB 4 pole, 200 Amps, 415 Volt, AC ,25 KA = 01 No (O/G) (c) MCCB 4 pole, 160 Amps, 415 Volt, AC, 16 KA = 02 Nos (O/G) (d) MCB SPN 63 Amps, 230 Volts = 10 Nos (O/G) (d) Multifunction meter MFM 4400 LED meter Cl 0.5S with RS 485 Make : L&T

(e) Phase indicating lamp = 03 Nos (R, Y, B) (f) Aluminium bus bar of capacity 600 amps four strip with colour coding should be shrinkable sleeves 4 Nos fixed on insulators-01 Set of four (g) Panel drawing shall be got approved from GE before placing order. Note : Unit rate quoted by the contractor here-in-before also includes for installation of panel on suitable PCC foundation and PCC plat form incl necessary earth and PCC work all as per manufacturer instructions and as directed by the Engr-in-Charge.

Supply, installation, testing and commissioning, in replacement, of Feeder Pillar box , cubical type, factory made, outdoor type, dust and vermin proof, fabricated out of mild steel sheet not less than 3.15 mm thick, and mild steel angle iron frame complete with openable shutters in front and rear having proper locking arrangement including 04 Nos legs made out of angle iron of suitable size and height of each leg shall be grouted in PCC. Feeder Pillar box shall be spray painted internally and externally with two coats of synthetic enamel paint over a priming coat of red oxide primer and connecting all incomming and outgoing cables with suitable size of Aluminium lugs complete all as specified and as directed by Engineer-in-Charge and comprising of following accessories/fittings :- (a) MCCB 4 pole, 250 Amps, 415 Volt, AC ,25 KA = 01 Nos (I/C) (b) MCCB 4 pole, 100 Amps, 415 Volt, AC, 16 KA= 01 Nos (O/G) (c) MCCB 4 pole, 63 Amps, 415 Volt, AC, 16 KA= 03 Nos (O/G) (d) MCB SPN 63 Amps, 230 Volts, AC = 04 Nos (O/G) (e) Multifunction meter MFM 4400 LED meter Cl 0.5S with RS485 Make : L&T

(f) Phase indicating lamp = 03 Nos (R, Y, B) (g) Aluminium bus bar of capacity 400 amps four strip with colour coding should be shrinkable sleeves 4 Nos fixed on insulators-01 Set of four (h) Panel drawing shall be got approved from GE before placing order. Note : Unit rate quoted by the contractor here-in-before also includes for installation of panel on suitable PCC foundation and PCC plat form incl necessary earth and PCC work all as per manufacturer instructions and as directed by the Engr-in-Charge.

Supply, installation, testing and commissioning, in replacement, of Feeder Pillar box , cubical type, factory made, outdoor type, dust and vermin proof, fabricated out of mild steel sheet not less than 3.15 mm thick, and mild steel angle iron frame complete with openable shutters in front and rear having proper locking arrangement including 04 Nos legs made out of angle iron of suitable size and height of each leg shall be grouted in PCC. Feeder Pillar box shall be spray painted internally and externally with two coats of synthetic enamel paint over a priming coat of red oxide primer and connecting all incomming and outgoing cables with suitable size of Aluminium lugs complete all as specified and as directed by Engineer-in-Charge and comprising of following accessories/fittings :- (a) MCCB 4 pole, 160 Amps, 415 Volt, AC ,16 KA = 01 No (I/C) (b) MCCB 4 pole, 63 Amps, 415 Volt, AC, 16 KA= 02 Nos (O/G) (c) MCB SPN 63 Amps, 230 Volts, AC = 04 Nos (O/G)

(d) Aluminium bus bar of capacity 400 amps four strip with colour coding should be shrinkable sleeves 4 Nos fixed on insulators-01 Set of four (e) Panel drawing shall be got approved from GE before placing order. Note : Unit rate quoted by the contractor here-in-before also includes for installation of panel on suitable PCC foundation and PCC plat form incl necessary earth and PCC work all as per manufacturer instructions and as directed by the Engr-in-Charge.

Supply, installation, testing and commissioning, in replacement, Junction box , cubical type, factory made, outdoor type of Size 45cm(l)x30cm(w)x60cm(h) , dust and vermin proof, fabricated out of mild steel sheet not less than 3.15 mm thick, complete with openable shutters in front and rear having proper locking arrangement including including 04 Nos legs made out of angle iron of suitable size and height of each leg shall be grouted in PCC and aluminium bus bar of size 400 Amps capacity , Three phase and neutral bus bar , making hot and cold drilling holes to aluminium bus bar . Junction box shall be spray painted internally and externally with two coats of synthetic enamel paint over a priming coat of red oxide primer and connecting all incomming and outgoing cables with suitable size of Aluminium lugs complete all as specified and as directed by Engineer-in-Charge.

M&L in replacement Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the galvanised iron strip 25×4mm as earthing lead by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth strip protected by provision of GI light grade pipe 40 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 25 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 5 of SSR 2009 Part-I and connecting to Poles all as specified or indicated including testing on complete all as specified and as directed by Engineer-in-Charge.

M/s Koul & Sons (BID ID -3428970)

M/S WEB COMPNAY (BID ID -3428744)

GANDOTRA CONSTRUCTION CO (BID ID -3429130)

SUMEET TRADING CORPORATION (BID ID -3429177)

M/S Behl Sons (BID ID -3428818)