Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.9 LAccepted-AOC FLAT NO 401 TULSANI HEIGHTS 4TH FLOOR GREEN PARK SOCIETY AKURDI GURUDWARA TO WALHEKAR WADI ROAD CHINCHWAD PUNE 411033 | PUNE | MAHARASHTRA | 411033 | L1 | Accepted-AOC LOWEST TENDERER | |
| 2 | L2₹38.9 L+₹5.9 L (17.8%)Rejected-Finance THERGAON PUNE | THERGAON | PUNE | MAHARASHTRA | L2 | Rejected-Finance GREATER THAN L1 |
Tender Value
₹49.9 L
EMD Value
₹1 L
Closing Date
9 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
P Bangar Raju,IDSE
GE (I) (NAVY), INS SHIVAJI - POST, LONAVLA -410402
REPAIRS TO ROADS AT CERTAIN OTM AREAS UNDER AGE B/R-I AT INS SHIVAJI LONAVLA
2023_MES_608405_1
GE/LONAVLA/8165/E8
Open Tender
Civil Works
Item Rate
270 days
GE (I) (NAVY) LONAVLA
As per NIT /Tender documents
6 documents required · 6 mandatory
₹500
Yes
GEINDEPNAVYLONAVLA
₹1 L
Yes
9 Oct 2023
8 Jul 2023
12 Aug 2023
8 Jul 2023
9 Aug 2023
22 Jul 2023
8 Jul 2023 - 21 Jul 2023
Amount
Repair to pot holes any depth, not exceeding 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting arround edges to at least 25 mm in depth, making good by applying tack coat with bituminiou primer at 5 kg per 10 sqm, putting in pre-mixed bituminous macadam, well rammed and sealed with premixed sand seal coat (9.8kg of per 10 Sqm binder with 0.09cum of stone chipping, 6.3 mm size and, again well rammed (including supply of premix macadam, binder and chipping) depth of potholes exc 30 mm depth complete all as specified and as directed.
M&L Laying and compacting 75 mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as pe table 400-13 of MaRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-1OOKN static weight and consolidating to required gradien and camber complete all as specified and directed The finished surface tolerances to be as per Table 900-1 of MaRTH specifications for Road and Bridge works 2013
M&L Preparing WMM surfaces by brushing for removing caked mud etc sweeping with brooms and finally fanning the clear surfaces with gunny bags to remove dirt etc appluing primmin tack coat with paving bitumen primer @10 Kg/10 Sqm of road surface.
M&L for applying evenly a priming / tack coat with bituminous primer @ 10 Kg per 10 Sqm.
M&L for premix bituminous, macadam laid, rolled & compacted to required camber & gradient using power roller of 8 to 10 ton capacity (consolidated thickness 75mm or less) & the binder content (VG 30 bitumen) should not be less than 4% by weight of total mix complete all as specified and as directed.
M&L for applying evenly a priming / tack coat with bituminous primer @ 5 Kg per 10 Sqm.
M&L for laying bituminous SDAC (Semi Dense Asphaltic Concrete)a 40mm consolidated thickness with 5.5% binder content by weight of total mix, using VG 30 bitumen by mechanised paver) rolled and compacted to required camber and gradient with 8 to 10 ton power roller over and including preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and as directed.
M&L for preparing of new or previously treated road surface and painting lines, dashes, arrows letters etc on road pavements and the like 10cm wide with road marking paint 2.5 mm thick mechnically with white or golden yellow paint including reflecting beads at 250 gms per sqm of surface area and including removal of old loose paint by burning /scraping method complete all as specified and directed. Notes:-(i) The thickness 2.5 mm mentioned above is exclusive of the thickness of glass beads as per IRC:35. (ii) The finished surface shall be in uniform level and free from streaks and holes.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth; for foundation , etc or for shafts, wells, cesspits, manholes, pair holes, etc n.exc 10 Sqm on plan and n.exc 1.5 in depth and getting out in hard/dense soil.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)
Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified and directed
Demolition of Brickwork or stone/bou-lder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6 M mean radius in CM 1:6
Provide cement concrete of 1:2:4 (20mm graded aggregate) type B1 for coping.
M & L for rendering 15 mm thick cement plaster (1:6) on fair faces of brick or concrete surfaces.
M&L for 150 mm thick (spread thickness) moorum filling for berms, spread, rolled and compacted to required gradient & camber complete all as specified & as directed.
PCC (1:4:8) type D2 (using 40 mm graded stone aggtegate) as in foundation filling and mass concrete
M&L for refixing in repair of rubber moulded Machine pressed precast concrete interlocking paver block with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006 of 60 mm thickness, M-35 grade over and including 30mm thick crushed stone sand layer complete all as specified and as directed.
M&L for rubber moulded Machine pressed precast concrete interlocking paver block with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006 of 60 mm thickness, M-35 grade over and including 30mm thick crushed stone sand layer complete all as specified and as directed.
M&L for refixing in repair of coloured chequered cement concrete tiles 30cm X 30cm X 25mm thick set jointed & pointed in neat cement slurry with grey cement and pigments ove 20 mm thick screed bed in CM (1:6) and making good complete all as specified
M&L for coloured chequered cement concrete tiles 30cm X 30cm X 25mm thick set jointed & pointed in neat cement slurry with grey cement and pigments ove 20 mm thick screed bed in CM (1:6) complete all as specified
M&L for pre cast Machine pressed cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in kerbs stones and fixing all as per manufacturer instructions etc size shall be decided and directed by GE
Radhika Construction
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .