IMPROVEMENTS TO CERTAIN SMQS AT AF STN SURATGARH

Amount

Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness (below or above ground level) un- reinforced, complete all as specified and as directed.

Demolition of stone or brick masonry built in cement mortar including all quoins, arches etc. but excluding ashlar facing, dressed stone work etc, complete all as specified and as directed.

Material and labor for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and as directed.

All as per Srl item No. 3.00 here-in-before but except bricks.

Material and labour brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1 :4 in half brick wall, complete all as specified and directed.

Material and labour for 75mm thick plain cement concrete 1:3:6, type C1, using 20mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:12 and surface finished even and smooth without using extra cement including making joint at 2.5m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified and direcetd.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified and directed.

Taking down shutters of any description exc. 1 sqm and not exc. 2 Sqm each, complete all as specified and directed.

Material and labour for Pressed steel frames of size 105mmx60mm made of 1.25mm thick Cold Rolled sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified.

Material and labour Pressed steel frames of size 125mmx60mm made of 1.25mm thick Cold Rolled sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified.

Material and labour for PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) as in hold fast iron fixing and back filing of pressed steel door frame including necessary form work complete all as specified and as directed.

Supply and fixing 35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides. The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkhats, complete all as specified and as directed.

Supply and fixing 35mm thick factory made 2nd class hardwood (Sal/ Hollock) glazed and skeleton shutters open rebated and prepare to receive glass gauge (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass/gauge etc size of member etc size members of shutters as specified in SSR part I Section-8 clauses 8.24(b) supplied and fitted to chowkhat, complete all as specified and directed.

Material and labour for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, conforming to Fe-290 (Gde E-165), complete all as specified and directed.

Supply and fixing Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified and directed.

Supply and fixing Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement from stiles and plained colour PVC sheet to be fitted with MS frame welded/sealed to the styles and rails with suitable PVC sheet beading, and jointing together with solvent cement, supplied & fitted in the frame at site as per specification and drawings shown in SSR Part-II, complete all as specified and directed.

Supply and fixing butt hinges, medium weight, cold rolled, mild steel, 100 mm long (ISI marked), complete all as specified and directed.

Supply and fixing butt hinges, stainless steel 100mm long (ISI marked), complete all as specified and directed.

Supply and fixing extruded aluminium alloy handle, fabricated type, anodised, 150mm long (ISI marked), complete all as specified and directed.

Supply and fixing Aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all as specified and directed.

Supply and fixing Aluminium alloy, 16mm dia and 250mm long anodised, sliding door bolt (ISI Marked) with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, complete all as specified and directed.

Supply and fixing in repair 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate, fixed including welding/ fixing to steel/ wooden chowkhats, complete all as specified and directed.

Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labours, articles n exc 200 Cu.cm each in 2nd class Hard Wood complete all as specified and directed.

Supply and fixing for peg set of six made of stainless steel complete all as specified and directed.

Material and labour for door seal rubber beading 75 mm wide 4 mm thick for fixing with door shutter and similar situation including necessary drilling and cutting etc, complete all as specified and directed.

Supply and fixing for Aluminum powdered coated window and ventilator shutters, sliding type with four track (two track with and including stainless steel wire cloth and fixed with tinned tacks or aluminium wire staples, two track with and including 3.5 mm thick tinted glass including necessary fitting and fixture) without sash bars, aluminum sections of size 40x20x1.5 mm fixed in aluminum anodised double frame of section size 63X35X2 mm including necessary jointing cleats, glazing clips, aluminum anodised sap beading, screws, aluminium beading, pvc packing, aluminum anodised fitting and fixture including powder coating of thickness n.exc 50 micron on all aluminium section, Aluminium chequered grills as on aluminium windows weight not less than 1.0 kg/sqm complete all as specified and directed. Make: - Hindalco/Jindal

Supply and fixing factory made steel window box type using ERW hollow 'P' section comprising double frame for glazed and gauged skeleton shutters jointing internally with flat iron complete including grill of 12mm square bar, fixed horizontally @ 100mm centre to centre hinges, handle, tower bolts, lugs etc with cooler provision complete all as specified and as directed. Note: - (i) For the purpose of measurement and payment double shutter with frame shall be consider as one unit. (ii) Glazing and wire mesh shall be measured and paid for separately in respective item of schedule.

Supply and fixing for Stainless Steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed.

Supply and fixing in repairs Stainless Steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed.

Material and labour for sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified and directed.

Material and labour for figured glass, pin headed type, 3mm thick and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fixing in repairs factory made mild steel cupboards shutters 1 mm thick with frame made from 1.25 mm thick sheet including all fittings i.e. mortice lock with handle, butt hinges ,peg set of their, etc including two coat of synthetic paint over primer complete all as specified and directed.

Supply and fixing for 2nd class hard wood plain fillets square or rectangular or tri angular in section and bull- nosed, splayed, chamfered or rounded on one edge or face, clean sawn planed on both sides secured with nails or beads in section exc 3sqm and n-exc 6 sq cm in cup board or drawer frame work complete all as specified and directed.

Material and labour for block boards 18/19 mm thick, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face in Cup Board or drawers complete all as specified and as directed.

Material and labour for Decorative laminate 1.5 mm thick type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions with Cup Board, cabinet or drawers complete all as specified and as directed.

Supply and fixing Continuous (piano) hinges 30 mm width of flaps, mild steel, bright finish or electro galvanised with Cup Board or drawers complete all as specified and as directed.

Supply and fixing 75mm size bright finished chromium plated steel handle of approved shape and design fixed with cadmium coated screws on the kitchen cabinet drawers complete all as specified and as directed.

Supply and fixing 0 degree clip type self closing hinges for cabinets fixed with cadmium coated screws as per sample complete all as specified and directed.

Supply and fixing magnet catches brass body suitable for cupboard shutter complete all as specified and as directed.

Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Material and labour for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of roof projection ceiling etc including repairing of broken portion up to 6m height and surface finished even and smooth without using extra cement, complete all as specified and directed.

Material and labour for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as on wall complete all as specified and directed.

Material and labour for complete removal of existing treatment from wall surfaces and applying one coat of Dr fixit solution to avoid seepage leakage and effect of efflorescence, complete all as specified and directed.

Material and labour for 15 mm thick rendering in two layers i.e. 10 mm thick in cement mortar 1:4 plus 5 mm thick in cement mortar 1:4 mixed with approved water proofing compound on fair faces of brick surfaces or concrete surfaces, surface finished even and fair without using extra cement all as specified and directed. Note: - Water proofing compound shall be measured and paid separately.

Material and labour for rough cast plaster with a mixture consisting of crushed stone or fine gravel aggregate of size 6 to 8mm as directed, mixed with coarse sand and cement in the ratio 1:1:1, finished even over rendering with under coat 15mm thick cement and sand mortar 1:4, complete all as specified and directed.

Material and labour for preparation of new plastered or un-plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

Material and labour for applying two coats of exterior acrylic emulsion (weather proof treatment ) paint of approved quality, in camouflaging patterns, over new plastered surfaces, including preparation and using primer new surfaces, complete all as specified and directed.

Material and labour for preparation of new plastered or un-plastered surfaces of wall and applying two coats of oil emulsion distemper over and including one coat of primer of approved quality and over and including 1-2 mm thick JK/Birla wall care putty to achieve smooth finish surface, complete all as specified and directed.

Material and labour for complete removal of existing treatment from wall surfaces and applying two coats of oil emulsion distemper over and including 1-2 mm thick JK/Birla wall care putty to achieve smooth finish surface complete all as specified and directed.

Material and labour for preparation of plastered or unplastered old decoraced surfaces on wall including cornices pilasters by brooming down or steel wire brushing, scraping down,smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash on wall, complete all as specified and directed.

Material and labour for preparation of plastered or un-plastered old decorated surfaces on ceiling including cornices pilasters by brooming down or steel wire brushing, scraping down, smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash on ceiling complete all as specified and directed.

Material and labour for applying two coats of exterior acrylic emulsion (weather proof treatment) of approved quality, in camouflaging patterns , including preparation of old surfaces like brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots complete all as specified and directed.

Material and labour for mild steel work as in bands, straps, supports or stays for rain water, ventilating pipes including bolts, if required, bolt hooks (stay), heavy for large gates; hook and pintle hinges; large hasp and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles, conforming to Fe-290 Gde E-165, complete all as specified and directed.

Material and labour for preparation of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

Material and labour for preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

Material and labour for preparation of old painted surfaces, of wood and wood based material of any description over 10cm width or girth by cleaning, sand papering, brushing etc, filling in crevices and cracks etc with approved filler and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparing old painted surfaces of steel and iron surfaces, over 10 cm in width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc, filling in crevices and cracks etc. with approved filler and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for (Reinforcement cut as required to facilitate demolition), complete all as specified.

Material and labour for form work to soffits of suspended slabs such as roof slabs, floor slabs, shelves, landing and similar work not exceeding 200mm thick (horizontal or sloping) and to edges of concrete surface fair finished complete all as specified and as directed.

Material and labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide surface fair finished complete all as specified and as directed.

Material and labour for Reinforced cement concrete, type A-1 (1:1.5:3) nominal mix, using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Material and labour for TMT mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Material and labour for TMT mild steel bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Material and labour for coloured glazed ceramic tiles of approved shade of size 450 x 300 mm x 7 to 8mm thick as in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Material and labour for anti skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but n exc 0.11 Sqm, in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

Material and labour for anti skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but n exc 0.18 Sqm, in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

Demolition of stone slabs/paver block and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed.

Material and labour for machine cut polished kota stone slab flooring 18-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 20mm thick screed bed in cement mortar 1:6, rubbing, grinding and polishing to achieve mirror finish, complete all as specified and directed. Note: - Kota stone shall be laid in one piece for treads and risers for step, window cills and moulding/rounding of edge properly.

Material and labour for polished Kota stone slab 18-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 10mm thick rendering in cement mortar 1:4, rubbing, grinding, rounding of edges and polishing to achieve mirror finish, complete all as specified and directed. Note: Kota stone shall be laid in one piece for treads and risers for step, window cills and moulding/rounding of edge properly.

Material and labour for Udaipur green marble (of any type) 14 to 16 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble stone, laid over and including 15mm thick screed in cement mortar 1:4, rubbing, grinding, rounding of edges and polishing(table rubbed & polished) to achieve mirror finish and making hole in stone and RCC shelves suitable for gas pipe, with round edges where required, complete all as specified and directed.

Material and labour for 75 mm thick PCC 1:4: 8 type D-2 using 40 mm graded stone aggregate as in sub base of floor/tiles etc complete all as specified and as directed.

Material and labour for Parking floor coloured heavy duty vitrified tiles (Square/rectangular) polished, area of each tiles exceeding 0.06 Sqm but n exc 0.18 Sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 15mm thick screed bed or bedding layer in Cement Mortar (1:6) as in floor finished even and rough to receive the top layer complete all as specified and directed.

Supply and fixing stainless steel 20-25 mm dia drapery curtain rod including brackets and end knobs fixed with plugs and screws, complete all as specified and directed.

Supply and fixing in repairs Vitreous Chinaware squatting pan, Orissa pattern size 580mm x 440mm with integral foot rests, white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, including provision of lime concrete, making connections to trap and to flush pipe etc., and making good to floors, complete all as specified and directed.

Supply and fixing in repair Vitreous china wash down water closet pan (Pedestal pattern including one toilet paper holder, one health faucet and jet integrated controlled by two way angle valve) including plastic water closet seat white colour closed pattern with flat bottom and cover and MS CP aluminium/PVC hinging devices complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs, PVC valveless, dual type, symphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float , 32 mm dia PVC long bend flush pipe 90cm long, complete all as specified and directed.

Supply and fixing in repairs stop valves, 15mm bore, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., complete all as specified and directed.

Supply and fixing in repairs PVC connection 15mm dia, 600mm long, hot water grade with brass chromium plated nuts and washers at both ends, complete all as specified and directed. Make: - Prayag/Polytuf/Pearl.

Supply and fixing in repairs Brass chromium plated shower rose of 125mm size with or without swivel joints with arms suitable for 15mm bore pipe, complete all as specified and directed.

Supply and fixing in repairs, wash hand basin vitreous china flat back 550 x400 mm size white, first quality, with and including PVC waste coupling 32mm size, PVC waste pipe 32mm bore, brackets of Mild Steel angle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer over angle iron brackets to walls complete all as specified and as directed.

Supply and fixing in repairs, sink with drainage board made out of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe overall size 915X460mm bowl size 410X330X160mm, complete all as specified and directed.

Supply and fixing stainless steel Plate rack 1mm thick of overall size 750mmx600mmGrade -304 including shelves rod for putting plates etc, complete all as specified and directed.

Supply and fixing in repairs bib tap, 15mm bore, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

Supply and fixing in repairs, 15mm bore, Kitchen/WHB mixer with foam flow, fancy type, chromium plated, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed.

Supply and fixing in repairs Gun-metal, globe or gate valves of 20mm dia, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

Supply and fixing in repairs soap dish, brass chromium plated, complete all as specified and directed.

Supply and fixing in repairs towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Supply and fixing Acrylic corner set of 3 pieces as per sample approved by Engineer -in-Charge complete all as specified and directed

Supply and fixing sheet glass 5.5 mm thick WHB Shelf 600 mm long and 125 mm wide as per sample approved by Engineer-in-Charge complete all as specified and directed.

Supply and fixing in repairs PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. Make: - Finolex/Reliance/Supreme

Supply and fixing in repairs 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

Supply and fixing in repairs 110mm bore PVC (SWR) bends with access door of any radius, complete all as specified and directed.

Supply and fixing in repairs 110 mm bore PVC (SWR) junction single (Single T) with access door equal or unequal, complete all as specified and directed.

Supply and fixing in repairs 110 mm bore PVC (SWR) junction double (double T) equal or unequal, complete all as specified and directed.

Supply and fixing in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval, complete all as specified and directed. Make: - Finolex/Reliance/Supreme

Supply and fixing in repairs 75 mm bore PVC (SWR) bends with access door any radius, complete all as specified and directed.

Supply and fixing in repairs 75 mm bore PVC (SWR) junction single (Single T) with access door equal or unequal, complete all as specified and directed.

Supply and fixing in repairs 75 mm bore PVC (SWR) junction double (double T) with access door equal or unequal, complete all as specified and directed.

Supply and fixing in repairs 110 mm bore PVC (SWR) vent cowl, complete all as specified and directed.

Supply and fixing in repairs brass chromium plated grating 75/100 mm dia complete all as specified and directed.

Supply and fixing in repairs brass chromium plated grating 125mm dia with hole, complete all as specified and directed.

Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps & similar work etc. and cutting chases for cancelled water tubing and making good, cutting exc 10cm but not exc. 20cm girth in brick walls, complete all as specified and directed.

Taking up or down GI tubing with al connections and fittings of 15mm bore including cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down GI tubing with all connections and fittings of 20mm bore including cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing galvanized iron water tubing, ‘medium grade’ 15mm bore, with all fittings such as bend, tee, union etc., fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Supply and fixing galvanized iron water tubing, ‘medium grade’ 20mm bore, with all fittings such as bend, tee, union etc., fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Re-fixing old steel tubing of 15mm bore and connections in new or old position (Walls, ceiling, floors etc.), complete all as specified and directed.

Re-fixing old steel tubing of 20mm bore and connections in new or old position (Walls, ceiling, floors etc.), complete all as specified and directed.

Dismantling water tank of capacity exc 250 and n exc 500 ltr of any type, PVC/RCC/MS complete all as specified and directed.

Supply and fixing rotationally moulded polyethylene white colour triple layer water storage tank (cylindrical vertical with closed top) hoisted & fixed in position of capacity 500 liters including ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore pipe, complete all as specified and as directed.

Material and labour for Rolled mild steel work in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (Cut to ordinary length i.e. within 20mm of the length indicated), conforming to Fe-410-W (Gde E-165) quality-B, complete fixed in repairs all as specified and directed.

Taking down existing water proofing treatment from the top of RCC/arch slab, including taking down existing PCC padding tiles mud phuska or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish outside the premises, complete all as specified and directed.

Material and labour for PCC (1:2:4), nominal mix, type B-1, using 20mm graded crushed stone aggregate as in PCC padding on depression of roof finished even and fair without using extra cement, complete all as specified.

Material and labour for water proofing treatment with APP based modified 5 layered prefabricated water proofing polymeric membrane over roof consisting of cleaning of concrete or plastered surface of roof and applying evenly a bitumen primer conforming to IS 3488@ 0.30Kg per Sqm followed by a tack coat @ 1.2kg per Sqm using 85/25 grade industrial hot blown bitumen over it laid with APP modified polymeric water proofing membrane minimum weighting 3.0 kg per Sqm reinforced with non-woven polyester fabric (weight not less than 170 gm per sqm) unrolled & bonded to substrate with longitudinal and end laps 100mm as per manufacturer's instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.2 kg Sqm and as per manufacturer instruction and including taking the APP membrane will be required where the parapet wall exceed 45cm for carrying over and taking into parapet walls, cut out neatly a horizontal groove 6.5 cm deep, 7.5 cm wide section with lower edge at not less than 15 cm above the graded roof surface and groove shall be finished smooth with cement mortar 1:4 with WPC @3% by weight of cement where the parapet wall height is 45cm or less no grove will be required as the water proofing treatment will be carried over the top of parapet wall to its full thickness, complete all as specified and directed.

Material and labour for 15 mm thick rendering in cement mortar 1:4 on roof surface using water proofing compound as per manufacturer instruction surfaces finished even and smooth without using extra cement as on wall complete all as specified and directed.

Material and labour for white Terrazzo tiles 25cmx25cmx22mm thick with white cement and pigment , with size of chips upto 6 mm; set jointed and pointed in neat white cement slurry in roofs, and cut and polished complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for PCC 1:2:4, type B-0 using 12.5mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed.

Material and labour for 15mm thick cement screed in CM 1:3 admixed with integred waterproofing compound FOSROC's complast X 421 IC @ 130ml per bag FOSROC's Nito bond AR cement slurry/STP No 1 liquid @ 200ml per bag of complete all as specified and directed.

Material and labour for applying two coats of SHALIMAR SUPERCRETE /NITOBOND water proofing coating on the entire surface of sunken portion complete all as specified and directed.

Material and labour for galvanized iron spout pipe 40mm dia projecting atleast 20cm clear of wall ‘medium grade’ including making holes in walls and making good disturbed surfaces, complete all as specified and directed.

Material and labour for 10 mm thick rendering in cement mortar 1:4 on roof surface using water proofing compound as per manufacturer instruction surfaces finished even and smooth without using extra cement as on wall complete all as specified and directed.

Material and labour for broken brick aggregate of gauge 40 mm to 80mm for loose filling as in sunken flooring complete all as specified and as directed.

Material and labour for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded aggregate mixed with approved water proofing compound as in sub floor, sub base; concrete surface finished even and rough to receive topping floor/tiles finish/layer complete all as specified and directed.

Supply liquid water proofing compound (ISI marked), complete all as specified and directed.

Material and labour for repairing of RCC projections, chajjas , roofs, facia etc. by necessary preparation i.e. scrapping, cutting, chiseling, de-rusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sq Mtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified and directed. Note: - Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor.

Material and labour for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. Complete all as specified and directed.

Material and labour for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm c/c both ways apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

Excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts wells cesspits, manholes, pier holes etc n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and directed.

Returning filling in layers including leveling watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed.

Removing surplus spoil to a distance not exceeding 50 m and depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and directed.

Material and labour for salt glazed stoneware drain pipe laid in trenches and joints as specified bore of pipe 150mm complete all as specified and directed.

Material and labour for cement concrete type D2 1:4:8 (40 mm grade aggregate)as in concrete bed to drain pipes 150mm internal dia including paking under and haunching against the pipe sides of pipe after they are laid and tested complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate ) as in foundation filling, mass concrete etc complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc 6 M mean radius built in CM 1:4 including in circular well staining (any radius constructed from the base of curb) complete all as specified and directed by Engineer-in-Charge.

Material and labour for 15 mm thick cement plaster in cement mortar 1:4 with water proofing compound as per manufacturer's instructions to brick or concrete surface finished even and smooth without using extra cement and using waterproofing compound complete all as specified and directed. Note: - WPC shall be measured and paid separately.

Supply only integral water proofing compound

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitered/stopped ends etc complete all as specified and directed.

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in cills, PCC blocks, coping, benching, water troughs, seismic and other similar bands, plinth bend, etc including weathering slightly rounded or chamfered angles and throating, including necessary form work etc complete all as specified and directed.

Material and labour for precast cement concrete type B-1 1:2:4 (20mm graded aggregate) and set in Cement Mortar (1:4) as in landings, manholes cover slabs, chajjas, shelves and similar articles including necessary form work complete all as specified and directed.

BLANK

Cleaning and cutting into existing Manholes for connecting new drains/pipes up to 200 mm bore, making good to pipes and rendering , cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section ) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as specified and as directed.

Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified and as directed.

Dismantling and taking down fluorescent tube light single/double of any wattage or size fitting for repair or replacement of burnt/worn out accessories or carrying to MES store (Accessories or components to be provided free for replacement by department), complete all as specified and as directed.

Taking down unserviceable sub main wiring of any type/size including wires, conduits/batten etc, complete all as specified and as directed.

Taking down unserviceable DB’s box including MCB’s of any size/rating, complete all as specified and as directed.

Material and labour for point wiring with single core PVC insulated unsheathed 1100 volts grade FRLS cable of copper conductor multi stranded of size 1.5 sqmm (Nominal size) drawn through and including non metallic rigid PVC conduit medium grade, ISI marked not less then 20 mm dia with all accessories like tee, straight joint, L bend etc concealed in wall, ceiling, floor etc, pressed MS Sunken boxes in wall of required size and colour for modular switches and sockets, 1.5 sqmm (Nominal size) PVC insulated (green insulation) copper conductor FRLS earth continuity cable drawn with wiring and connected to common earth dolly all as specified for one light point controlled by one SP switch including making good distrubed surface, complete all as specified and directed. Note: - Cost for MS Sunken Boxes and Hylum sheets and cutting, chiseling and making good to existing surfaces shall deemed to be included in the quoted rate.

All as per Serial item No. 150.00 here-in-before but for one ceiling fan/exhaust fan and wall mounted fan point controlled by one SP switch, complete all as specified and directed.

All as per Serial item No 150.00 here-in-before but for one light point controlled by Two, two way switch, complete all as specified and directed.

All as per Serial item No 150.00 here-in-before but for one bell point controlled by one bell push, complete all as specified and directed.

All as per Serial item No 150.00 here-in-before but for one 5 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size, complete all as specified and directed.

All as per Serial item No 150.00 here-in-before but for one 5 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size, complete all as specified and directed.

All as per Serial item No 15.00 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor FRLS cable PVC insulated including earth wire 2.5 Sq mm copper conductor FRLS cable connected to earth dolly complete, all as specified and directed. Note: - for Srl Item No 150.00 to 156.00 Make of cable: - Havells/Polycab/HPL. Make of conduit: - Havells/Plaza/Kalinga.

Supply and fixing switch piano flush button single pole one way 5 amp 240 volts, complete all as specified and as directed. Make: - Anchor/Plaza/Crabtree

Supply and fixing Socket outlet 2 in 1, 3 pin, 5 and 15 amps, flush type, 240 volts complete all as specified and as directed. Make: - Anchor/Plaza/Crabtree

Supply and fixing Socket outlet, flush type 2 in 1, 3 pin, 5 amps, 240 volts complete all as specified and as directed. Make: - Anchor/Plaza/Crabtree

Supply and fixing switch piano flush type single pole two way 5 amps 240 volts, complete all as specified and as directed. Make: - Anchor/Plaza/Crabtree.

Supply and fixing switch piano flush button single pole one way 15 amp 240 volts, compete all as specified and as directed. Make: - Anchor/Plaza/Crabtree.

Supply and fixing bell push switch, single pole, and one way flush type, 5 Amps, 240 volts complete all as specified and as directed. Make: - Anchor/Plaza/Crabtree.

Supply and fixing of ceiling rose, surface type, 65mm x 50mm, 3 terminal complete all as specified and as directed by Engineer-in-Charge. Make: - Anchor/Cona/Havells.

Supply and fixing of bell multi music type, 230 volt AC, single pole, complete all as specified and as directed by Engineer-in-Charge. Make: - Anchor/Cona/Havells.

Supply and fixing of lamp holder, PVC/polycarbonate type, insulated body with back plate of batten fitting complete all as specified and as directed by Engineer-in-Charge. Make: - Anchor/Cona/Havells.

Supply and fixing of LED bulb 09 watt, complete all as specified and directed. Make: - Crompton/Polycab/Havells.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED bulkhead luminaire 10 watt, wall/surface mounted complete with LED lamp 10 watt, all accessories, pre-wired including providing flexible copper wire, twin core cable PVC insulated sheathed, complete all as specified and directed.

Supply and fixing LED sleek mirror light fitting 10 watt provided with high output diffuser 2 feet, 230 Volts complete LED tube rod 10 watt with all accessories, pre wired and including connecting up with twin core copper conductor cable complete all as specified and directed by Engineer-in-Charge. Make: - Havells/Bajaj/polycal/C&S/CG.

Taking down ceiling fans of any sweep and any size including cable connections and disconnecting of fan blades and removing the fan with blades deposit to store yard as it is in working condition for further hanging in its original position or any other position including as per direction of Engineer-in-Charge including it's fitting and fixtures after carrying out service includes cleaning, greasing and oiling, painting of fan with one coat of synthetic enamel spraying painting including marking of MES number with black paint after preparation of surface reassembling the fan etc including testing complete all as specified and as directed by Engineer- in-Charge. Note: - Any damage has to be made good by the contractor to make the item functional after testing.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and direted.

Supply and fixing Fan step regulator, 120W 230 volts, 50 HZ, AC. Supply complete all as specified and as directed. Make: - Anchor/Cona/Rider/legrand.

Taking down exhaust fans of any sweep and any size including cable connections and removing the exhaust fan with blades deposit to store yard as it is in working condition for further fixing in its original position or any other position as per direction of Engineer-in-Charge including it's fitting and fixtures after carrying out service i.e. cleaning, greasing and oiling, painting of exhaust fan with one coat of synthetic enamel spraying painting including marking of MES number with black paint after preparation of surface reassembling the fan etc including testing complete all as specified and as directed . Note: - Any damage has to be made good by the contractor to make the item functional after testing.

Material and labour for submain wiring with two single core 6.0 sq mm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit of size not less than 25mm dia, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 6.0 Sqmm multistranded copper conductor cable as continuous earth wire complete all as specified and as directed. Make of copper cable: - Havells/Polycab/L&T Note: - (a) The two runs of single core cable and specified earth continuity conductor and PVC conduit with fitting accessories will be measured as one run. (b) Cost of cutting, chasing and make good to existing surfaces are deemed to be including in the quoted rate by the contractor.

Supply and fixing in replacement sheet metal enclosures single pole and neutral earth enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 240 volts, complete all as specified and directed. Make: - Havells/Leagrand/C&S.

Supply and fixing sheet metal enclosure for distribution board SPN (when MCBs to be used) 8 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engineer-in-Charge. Make: - Havells/Leagrand/C&S.

Supply and fixing of MCB SP, 6-32A,10KA complete all as specified and as directed. Make: - Legrand /ABB/Schneider.

Supply and fixing of MCB SPN, 32A, 10KA complete all as specified and as directed. Make: - Legrand/ABB/Schneider.

Material and labour for Earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified and directed.

Material and labour for cutting opening through brick wall 230mm thick built in cement mortar suitable for exhaust fan 300mm sweep including making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required, complete all specified and directed.

Gill Construction Co

M/S Shree Ram Enterprises

MSR INFRATECH

M/S BUDHRAM BISHNOI