Addition / alteration and renovation of farmer hostel at KVK Kandaghat Solan (SH- Civil work including Water supply and sanitary installation).

Amount

Excavation in all kinds of earth work such as pick work, jumper work, including chiseling/wedging etc. and disposal of all excavated earth upto all leads, lifts and disposed earth to be leveled and neatly dressed complete in all respect as per satisfaction of Engineer-in-charge.

Filling in plinth with sand under floors including watering ramming consolidating and dressing complete including all leads and lifts of material as directed by the Engineer-in-Charge.

30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling not exceeding 4 metres and removal of the same for insitu-reinforced concrete complete and plain concrete work including all leads and lifts of material as directed by the Engineer-in-Charge.

a) Beams, cantilever, girders and lintel : Sides and soffits of beams, beam haunchings, cantilevers, girders bressumers and lintels not exceeding 1 metre in depth.

b) Flat surface such as soffits of suspended floors, roofs landing and the like Floor etc. upto 200mm in thickness.

Providing and laying cement concrete 1:8:16 (one cement : eight sand : sixteen graded stone crushed aggregate 20mm nominal size)and curing complete on slab and floor excluding the cost of form work screed laid under flooring complete in all respect as per satisfaction of Engineer-in-charge.

Providing and laying damp proof course to horizontal / vertical surfaces with cement mortar 1:2 (one cement : two sand) and curing complete in all respect as per satisfaction of Engineer-in-charge. a) 20mm thick

Applying a coat of hot bitumen (maxphalt 80/100) or equivalent using 1.70 kg. per square metre on damp course after cleaning the surface with piece of cloth lightly soaked in kerosene oil including all leads and lifts of material as directed by the Engineer-in-charge.

Providing and laying cement concrete work with concrete mixer and vibrator mix 1:1.5:3 (one cement one and half sand: three graded stone aggregate crushed aggregate 20mm (twenty millimetre nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in all leads and lifts as directed by the Engineer-in-charge. a) Suspended floor roofs, landings and shelves and their supports balconies, beams girders, bressurmers and cantilevers upto all floor level.

Providing TMT steel reinforcement for R.C.C. work including bending binding and placing in position complete upto all floor level including all leads and lifts of material as directed by the Engineer-in-Charge.

2nd class half brick masonry using common burnt clay building brick in superstructure in cement mortar 1:4 (one cement: four sand) including all leads and lifts of material as directed by the Engineer-in-Charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, frame and fixed in position complete in all respect as per satisfaction of Engineer-in-charge. a) Sawl wood.

Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position complete in all respect as per satisfaction of Engineer-in-charge. i) Sawl wood.

Providing and fixing 2nd class deodar wood paneled, glazed or paneled and glazed shutters for doors, windows and clerestory windows including black enameled iron butt hinges with necessary screw including all leads, lifts and carriage of material. a) 35mm (Thirty five milimetre) thick

Providing and fixing 35mm (thirty five milimetre) second class deodar wood in wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designation 85 G with wire of dia 0.56mm for doors windows and clerestory windows including bright finished back enameled iron hinges with necessary screw etc. complete in all respect as per satisfaction of Engineer-in-Charge.

Providing and fixing 12mm thick pre-laminated board both side BWP Phenol bonded exterior/interior grade paneled shutter (Action Tesa / Green lame make) with frame of 1st class deodar wood for door including bright finished/black enameled iron butt hinges with necessary screw etc. complete in all respect as per satisfaction of Engineer-in-charge. a) 40mm thick 1st class deodar wood frame.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete including all leads lifts of material as directed by the Engineer-in-Charge.

a). 200x10mm (two hundred into ten milimetre)

b). 150x16mm (one hundred fifty into ten milimetre)

c). 100x10mm (one hundred into ten milimetre)

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etc. complete including all leads and lifts of material as directed by the Engineer-in- Charge.

a) 125mm (one hundred twenty five milimetre)

b) 100mm (one hundred milimetre)

Providing & fixing veneered decorative plywood lining with decorative surface on one face with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) complete in all respect as per satisfaction of Engineer-in-charge( Green/ Century Make). a). 4mm thick ply

Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm dia metre bolts & nuts & wooden plugs & embedding in cement concrete block 30x10x15cm 1:3:6 (one cement : three sand : six graded stone aggregate 20mm (twenty milimetre nominal size) complete in all respect as per satisfaction of Engineer-in-charge.

Providing and fixing 19mm thick water proof commercial board in shelves / box for cupboard with but joints & fixing with nails & screws etc. complete in all respect as per satisfaction of Engineer-in-Charge( Green/ Century Make.

Providing and fixing 19mm thick water proof commercial board shutter for cupboard including fixing with nickle plated piano hinges with screws etc. complete in all respect as per satisfaction of Engineer-in-charge( Green/ Century Make.

White / coloured glazed jointless tiles 8mm (eight milimetre) thick in skirting risers of steps and dado 12mm (twelve milimetre) thick cement plaster 1:3 (one cement : three sand) and jointed with white cement slurry including all leads and lifts of material as directed by the Engineer-in-Charge (Nitco/ Johnson / Kazaria make 1st quality).

Providing and laying granite stone in flooring 20mm (average) thickness base of cement mortar 1:3 (one cement: three sand) laid over and jointed with grey cement slurry mixed pigment to match the shade of granite stone including rubbing and polishing complete. a) 20mm thick black jet.

Providing & fixing 10mm thick antiskid water proof stain & impact resistant heavy duty vitrified tiles (Premium Kazaria / Nitco/ Johnson make) 600x600mm and 10mm thick manufactured of approved shade and cooler in floorings, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (One cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete in all respect as per satisfaction of Engineer-in-charge.

Providing & fixing 10mm thick glossy water proof stain & impact resistant heavy duty vitrified tiles (Premium Kazaria / Nitco / Johnson make) 600x600mm and 10mm thick manufactured of approved shade and colour in floorings, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (One cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete in all respect as per satisfaction of Engineer-in-charge.

Applying two coats of wood preservative on new wood & wood based surface after including preparing surface by thoroughly cleaning oil grease, dirt & other foreign matter, sand papering & knotting complete in all respect as per satisfaction of Engineer-in-charge.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting including all leads and lifts of material as directed by the Engineer-in-Charge. a) Ready mixed paint brushing to wood primer pink

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of all dirt dust and other foreign matter sand papering and stopping including all leads and lifts of material as directed by the Engineer-in-Charge. i) with enamel paint other than white or white

Applying priming coat on new concrete/ masonry / asbestos cement/ plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with ready mixed primer complete in all respect as per satisfaction of Engineer-in-charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete in all respect as per satisfaction of Engineer-in-charge.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete / stone / plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete in all respect as per satisfaction of Engineer-in-charge.

Polishing two coats with melamine polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler complete in all respect as per satisfaction of Engineer-in-charge.

6mm (six milimetre) cement plaster to ceiling in cement mortar 1:3 (one cement: three sand) complete in all respect as per satisfaction of Engineer-in-charge.

15mm (fifteen milimetre) cement plaster in single coat in fair/rough side on brick concrete/stone walls for interior/exterior plastering with all height including arises internal rounded angles chamfers and/or rounded angles not exceeding 80mm (eighty milimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement: six sand) including all leads and lifts and material as directed by the Engineer-in-Charge.

Removing of white washing or colour washing by steel with brushing and/or scrapping & preparing the surface smooth including necessary repair to scratches complete in all respect as per satisfaction of Engineer-in-charge.

Re-fixing old glass panes bedded in putty and fixed with glazing pins complete in all respect as per satisfaction of Engineer-in-charge.

Repair to plaster in patches of 2.50 Square metre and under and 10mm to 15mm thick including cutting the patches in proper shape & replastering the surface of wall including disposal of rubbish to the dumping ground with in all leads with cement: mortar 1:6 (One cement: six sand) complete in all respect as per satisfaction of Engineer-in-charge.

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary complete including all leads, lifts and carriage of material complete in all respect as per satisfaction of Engineer-in-charge. a) 4mm thick plain glass pane

Demolition of above ground level upto all floor level including disposal of unserviceable material within all leads complete in all respect as per satisfaction of Engineer-in-charge. i) Un-reinforced cement concrete more than 15 cm thickness.

Demolition of brick work above ground level upto all floor level including stacking of serviceable material and disposal of unserviceable material within all leads & lifts as per direction of Engineer-in-charge. a) In cement Mortar

Taking out doors, windows and clerestory windows shutters (Steel or wood) including stacking with in all leads, lifts & carriage of material as directed by the Engineer-in-charge. a) Not exceeding three square metre in area.

Providing and fixing to wall ceiling and floor galvanized mild steel tube (medium grade) tube fittings and clamps including making good the wall, ceiling and floor complete in all respect as per satisfaction of Engineer-in-charge Jindal / Surya make.

a) 15mm nominal bore

b) 25mm nominal bore

Providing and fixing vitreous China wash down, water closet squatting pan (Indian type WC pan) size 580mm complete in all respect as per satisfaction of Engineer-in-charge (earth work, bed concrete, foot rest and trap to be measured and paid for separately) Cera / Hindware make. a) Orrissa Pattern

Providing and fixing vitreous china wash down water closet (European type WC pan) with integral ‘P’ or ‘S’ including jointing the trap with soil pipe in cement mortar 1:1 (one cement: one sand) complete in all respect as per satisfaction of Engineer-in-charge (Seat and cover to be measured and paid for separately) Cera / Hindware make. a) Ordinary closet

Providing and fixing plastic seat (Solid/Hollow type) art cover for wash down water closet with C.P. Brass hinges and rubber buffers complete in all respect as per satisfaction of Engineer-in-charge (Cera / Hindware make). a) Solid type Black or white plastic seat and cover.

Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings complete in all respect as per satisfaction of Engineer-in-charge Cera / Hindware make. a) Flat back 630x450mm

Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings complete in all respect as per satisfaction of Engineer-in-charge Cera / Hindware make. a) Circular 460mm dia counter top

Providing and fixing C.P. brass waste for wash basin or sink complete in all respect as per satisfaction of Engineer-in-charge.

Providing and fixing 600x450mm beveled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screw and washers complete in all respect as per satisfaction of Engineer-in-charge.

Providing and fixing C.P. brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. brass complete in all respect as per satisfaction of Engineer-in-charge. a) 600x20mm size

Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws complete in all respect as per satisfaction of Engineer-in-charge.

Providing & fixing 600mm X 120mm glass shelf with C.P. brass bracket & guard rail complete fixed to wooden plugs with C.P. brass screws complete in all respect as per satisfaction of Engineer-in-charge.

Providing and fixing C.P. brass bib tap with capstan head complete in all respect as per satisfaction of Engineer-in-charge Seiko / Smile / Spartan make). a) 15mm dia

Providing and fixing C.P. Brass pillar tap with capstan head complete in all respect as per satisfaction of Engineer-in-charge (Seiko / Smile / Spartan make). a) 15mm dia

Providing and fixing C.P. brass angle valve without nuts and pipe complete in all respect as per satisfaction of Engineer-in-charge. Seiko / Smile / Spartan make). a) 15mm dia

Providing and fixing one hole basin mixing faucet complete in all respect as per satisfaction of Engineer-in-charge.( Seiko / Smile / Spartan make).

Providing and fixing PVC connection pipe with brass union complete in all respect as per satisfaction of Engineer-in-charge. a) 45cm length i) 15mm nominal bore.

Providing and fixing brass full way valve with wheel complete in all respect as per satisfaction of Engineer-in-charge. i) 25mm nominal size

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete in all respect as per satisfaction of Engineer-in-charge (Filolex / Kisan / D-Plast make). a) 110mmx75mm

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/ Kisan /D-plast make).

a) 75mm dia

b) 110mm dia

Providing and fixing PVC plain bend ISI marked complete including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/ Kisan /D-plast make).

a) 75mm dia

b) 110mm dia

Providing and fixing PVC single equal branch plain ISI marked complete including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/ Kisan /D-plast make).

a) 75mm dia

b) 110mm dia

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in charge (Finolex/ Kisan /D-plast make).

a) 75mm dia

b) 110mm dia

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/ Kisan /D-plast make).

a) 75mm dia

b) 110mm dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/ Kisan /D-plast make).

a) 75mm dia

b) 110mm dia

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawl plugs etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/ Kisan /D-plast make).

a) 75mm dia

a) 110mm dia

Providing and fixing PVC size P or S trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Filolex / Kisan / D-Plast make). a) 110mm dia

Providing and fixing PTMT coloured/white high density polyethylene/poly propylene 10 litres capacity (full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, siphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) complete in all respect as per satisfaction of Engineer-in-charge (Cera / Hindware/ Prayag make).

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube etc. complete in all respect as per satisfaction of Engineer-in-charge .

Providing and fixing 100mm dia chromium plated grating of superior quality for floor, gully or nahani trap complete in all respect as per satisfaction of Engineer-in-charge.

Constructing manhole with R.C.C. top slab in 1:2;4 mix (1cement: 2 sand: 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 (1cement :4 sand : 8 graded stone 40mm nominal size), inside plastering 15mm thick with cement mortar 1:3 one cement: 3 sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix 1 cement:2sand: 4graded stone aggregate 20mm nominal size finished smooth complete including curing and testing complete in all respect as per satisfaction of Engineer-in-charge. a) Inside size 800x800mm and 500mm deep including SFRC Man hole cover with frame( Light duty Square 450X450 mm clear opening, cover 550X550mm & Frame 650X650mm). i) With 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 sand).

Cutting holes through existing brick work including making good the same in C:M 1:6 (1cement:6 sand) per cms depth of cutting complete in all respect as per satisfaction of Engineer-in-charge. i) holes upto and including 400 Sqcm in area.

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge. a). Extruded section profile size 48x40 mm

Providing and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge.

Providing edge moulding 20mm thick marble/ granite stone counters ,vanities etc. including machine polishing to edge to give high gloss finish etc. complete in all respect as per satisfaction of engineer- in- charge.

Providing & fixing 2nd class teak wood lipping / moulded beading or Taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the pre laminated particle /commercial board etc. complete in all respect as per satisfaction of engineer- in- charge.

Providing and fixing Aluminium safety hasps and staple with necessary screw etc. complete in all respect as per satisfaction of Engineer-in-charge. a) 115mm (one hundred fifty milimetre)

Providing and fixing Aluminium Hooks and eyes with necessary screw etc. complete in all respect as per satisfaction of Engineer-in-charge. a) 100mm (one hundred fifty milimetre)

Providing and fixing P.V.C. waste pipe 32mm dia for wash basin and sink complete in all respect as satisfaction of Engineer- in-charge.

Providing and fixing PVC gully trap with grating brick masonry chamber in cement mortar 1:5 and water tight CI cover with frame of 300mmx300mm size (inside) the weight of cover to be not less than 4.53 kg. and frame to be not less than 2.72 kg. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Kisan/D-plast make). a) 110mm dia P type

Jitender Sharma